Created PHP site and Dynamic Pages. So what next?

Hey guys,
So i have created a site. It is a simple Car Dismantlers site with 4 pages in a front end section for visitors to the site. The pages are index.php, contact.php, search.php and directions.php. I have a back end section in an admin folder where an administrator can add, update and delete records from a database which is password protected. The whole site is working fine locally but now i want to upload it and dont know where to start. I have domain name set up with Lime Domains, it is PHP and MySql ready. This is the first php site i have created and I dont really know where to start to get it up and running now.
Thanks in advance.

Hey J.S,
Do you think its a bad idea to have Database admin over them web? How could i make my db admin into a program to run on a certain computer. i.e on the car breaker yard where there is no dreamweaver.
Thanks J.S

Similar Messages

  • Created a one page index.php site with dynamic driven menu but have to click thrice before it popula

    Created a one page index.php site with dynamic driven menu but have to click thrice before it populates the content menu
    it has no problem getting the menu information but seems to forget that the content needs to load on first go ie for the Home page
    anyone with any help would be great

    Hey J.S,
    Do you think its a bad idea to have Database admin over them web? How could i make my db admin into a program to run on a certain computer. i.e on the car breaker yard where there is no dreamweaver.
    Thanks J.S

  • TS4006 Device does not appear in Find My iPhone and I tried all the options on the support page. What next?

    Device does not appear in Find My iPhone and I tried all the options on the support page. What next?

    Is the device lost or stolen? If so it may be turned off, not connected to the internet, and/or have a dead battery in which case it may never appear.
    The what next is then covered in:
    If your iPhone, iPad, or iPod touch is lost or stolen
    Reporting a lost or stolen Apple product

  • Create button choices and dynamically assign actions to them.

    Hi,
    I'm currently working on SAP Commercial Project Management which use Floor Plan Manager.
    Here, I've to create button choices and assign some actions to the button choice values dynamically.
    Please let me know, what's the process to do that .
    Regards,
    Arnab

    chk this
    Passing default value to bind variable on page load.
    http://adfcodebits.blogspot.com/2010/03/bit-2-setting-bind-variable-value.html

  • How to create a template and child pages using mockup designed in Fireworks

    I have created a website in Fireworks, and exported it to use in Dreamweaver.  How do I use the Master page in Fireworks as my template page in Dreamweaver?  When I bring in the .htm files from fireworks, it tries to bring in the entire page.  I have taken 25 hours of online training for Fireworks and Dreamweaver through Lynda.com, but there is not a specific video that tells you how to get your website from Fireworks into Dreamweaver if you want to utilize the Template and child page features.

    Use Fireworks to crop, slice and optimize images only.  DO NOT allow any graphics app to generate your HTML code for you.  This results in poorly formed code and rigid layouts that invariably fall apart when you attempt to edit them in DW.  Fireworks / Photoshop generated pages are for quick prototypes or design comps to show the client.  They do not work well on production sites.
    Taking a Fireworks comp to a CSS Layout in DW
    Part 1 - Initial Design
    http://www.adobe.com/devnet/dreamweaver/articles/dw_fw_css_pt1.html
    Part 2 - Markup preparation
    http://www.adobe.com/devnet/dreamweaver/articles/dw_fw_css_pt2.html
    Part 3 - Layout and CSS
    http://www.adobe.com/devnet/dreamweaver/articles/dw_fw_css_pt3.html
    DWT Template Basics -
    http://forums.adobe.com/message/2926278#2926278
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists 
    http://alt-web.com/
    http://twitter.com/altweb

  • How to create Static menu and Dynamic menu..?

    Hi,
         I'm new to flash and Action Script, I need to add static menu and dynamic menu to my application. I'm using Action Script 1.0. Can you help me to solve my problem..?
    Regards,
    Appu

    Hi Adithya,
    I think the following article is a great resource :
    http://www.ibm.com/developerworks/library/os-eclipse-3.3menu /index.html
    The current documentation for popup menu could be found here :
    http://help.eclipse.org/help32/index.jsp?topic=/org.eclipse. platform.doc.isv/guide/workbench_basicext_popupMenus.htm
    (it is also available locally if you install the Eclipse Platform SDK, in "Help" -> "Help Contents"-> "Platform Plug-in Developer guide")
    Best regards,
    Mariot
    adithya a écrit :
    > Hello,
    > Can anyone tell me as to how to create a 'Context Menu' (static and
    > dynamic)??
    > Also what is the difference between a static and dynamic context menus?
    >
    > Are there any javadocs or tutorials?
    > Please help.
    >
    > Adithya.
    >

  • Older Business HTML and Dynamic Page Table question

    I am not sure if anyone will know here (or if this is the best place to post), but I have a question concerning using the Business HTML template library controls/API for use with ITS. I am attempting to use the "Dynamic Page Table" control, and have hit some problems. Does anyone have any example code they can share on getting this to work correctly (ie, paging through records, selecting from rows, etc)? I have "torn apart" the underlying Javascript and even modified my code to adjust for some formatting issues that the API's do not handle, however, my "pages" all display at once in the beginning and only hide when I use one of the paging icons (forward,back,all back, etc). THe "isVisible" parameter seems to do nothing for the "page" DIVs. Currently running the latest version of ITS and R/3 4.6b on the backend if that helps. Also, the example from the SAP Design Guild cookbook is very basic and does not "page" as I need. Thanks in advance!
    CSolomon

    Check the following Tables
    FND_FORM_CUSTOM_RULES
    FND_FORM_CUSTOM_SCOPES
    FND_FORM_CUSTOM_ACTIONS
    FND_FORM_CUSTOM_PARAMS

  • I am trying to inport my efax number and it keeps failing what next

    I just bought the new printer that has efax built into it. HP Photosmart 7510 e-all-in-one C311e, I have Windows 7 64-bit, I have a efax number already but the printer will not connect to the web server. I have also tried to in port the number and it keeps failing. my efax number is 1-408-762-2517. what next?
    thank you,
    Rudy

    http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile/Quick-Fix-For-Most-eFax-Issues-Photosmart-7510...
    If I have SOLVED your issue, please feel free to provide KUDOS and make sure you mark this thread as SOLUTION PROVIDED!
    Although I work for HP, my posts and replies are my own opinion and not those of HP.

  • I just purchased acrobat xi standard and during installation it said it did not install and that's it. what next????

    I just purchased acrobat xi standard and during installation it said it did not install and that's all. what's next???

    Hi smetanka,
    Are you installing on Mac OS or Windows, and what version of the operating system are you using? Did you have a previous version of Acrobat on your system?
    Best,
    Sara

  • Create new site collection but page cannot be dislayed

    Hi all,
    im pretty new when it comes to Sharepoint.So far installation was successfull and i can access central administration page.
    I then changed Alternate access mapping from http://intra01/ (intra01 was probably addes,since computer has this name during setup)  to http://intra
    When i click the link,i only get this page cannot be displayed.
    When i created two new site collections,it is shown as http://intra/sites/main (where main was the name i gave for first site collection).
    When i click the link,i only get this page cannot be displayed.Same is for 2nd site i created.
    When i change Alternate access mapping for Central administration,this also fails and gives me page cannot be displayed.If i instead enter intra01,then i can access central administration.This does not work for the 2 site collection i created.
    What have i missed?
    thanks!
    Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you. Thank you! Off2work

    Hi
    let me split the issue
    <<I then changed Alternate access mapping from http://intra01/ (intra01 was probably addes,since
    computer has this name during setup)  to http://intra>>
    you are accessing your CA with http://intra1?
    and next you are trying to access it using http://intra?
    Did you installed CA on port 80?
    Anyway, please check if you can resolve the new name used in AAM , intra.
    If you can't please check your DNS configuration
    Come back with results and details. thanks
    Romeo Donca, Orange Romania (MCSE, MCITP, CCNA) Please Mark As Answer if my post solves your problem or Vote As Helpful if the post has been helpful for you.

  • Dreamweaver and dynamic pages {subject line edited and truncated by moderator}

    I want to create a page that will automatically load info from a existing database into preset area's like a clients name and previous purchases. Can Dreamweaver do this? and How?

    Assuming you're using MySql databases with PHP scripts, start your journey here:
    Get one of the following local testing servers for your OS and follow the installation instructions.
    WAMP for Windows - http://www.wampserver.com/en/
    XAMPP for Windows - http://www.apachefriends.org/en/xampp-windows.html
    XAMPP for Mac - http://www.apachefriends.org/en/xampp-macosx.html
    MAMP for Mac - http://www.mamp.info/en/downloads/index.html
    Setting up a PHP environment in Dreamweaver
    http://www.adobe.com/devnet/dreamweaver/articles/setup_php.html
    Pulling Data with MySql SELECT
    PHP MySQL Select
    Good luck!
    Nancy O

  • Mobile Site and System Pages

    I know you can create a separate mobile website for tablets and phone. I will be doing this for a site I am building that has content specifically targeted for iPad devices. The question I have though is how are system generated pages handled? For instance the eCommerce pages and shopping cart pages.
    How do I create tablet specific pages for system generated pages?
    Thank You!

    Using Muse, I was wondering if there is a way to convert a website that is already built into a mobile website. I have no idea how the website was originally built. My client is asking me to build a mobile site for his current site without touching his desktop site. His site was originally built in Dreamweaver I think but he have no way of finding the files and lost contact with his original designer. We don't want to start a new site from scratch with a new domain because he is afraid of losing his seo work.
    In other words. My client site was build in Dreamweaver or something else. I am not a programer and was going to use muse to make his mobile site. So the question is how do I link a muse made mobile site to his desktop site?
    Thank you.

  • How do i download my PHP site and edit it with Dreamweaver CS5?

    I have followed the instructions and installed MAMP for mac. Connected and downloaded the entire site.
    When i open the index.htm file it appears with a URL for the main website.
    When i place it in live view the website code and design appear, but i cant edit it.
    When i copy the code and save it then open the index.htm file the design appears without the links to the flash, gifs, etc and looks pretty basic.
    the page appears with the following meta tag
    <meta http-equiv="refresh" content="0;url=http://playconcert.com">
    Can anyone help!
    Thanks in advance.

    I have followed the instructions and installed MAMP for mac. Connected and downloaded the entire site.
    When i open the index.htm file it appears with a URL for the main website.
    When i place it in live view the website code and design appear, but i cant edit it.
    Have you tried Inspect mode? If not try this:
    Open your page in Split Design/Code view. Start Live View. Start Inspect mode.
    Move the mouse around in Live View. Notice that the element under the mouse is automatically selected in Code View. Click on the element that you'd like to edit. Make your edit in Code View. Press F5 to refresh Live View.
    Repeat, if necessary
    HTH,
    Randy

  • How to create a site and add security groups through code: scripts, csom, ... ?

    Hi,
    I'm new to CSOM and are looking for a way to create sites in SharePoint Office365 and especially add user to it with a specific role eg. 'visitor' or 'owner'.
    I use this code to add sites from a csv file, so far so good.
    But now I want to add security groups based on the csv file and assign a role. The security groups allready exists.
    and also how to add a user with a 'owner' role for some sites.
    That would make my life easier :-)
    so thank you in advance!
    # load assemblies
    #[System.Reflection.Assembly]::LoadWithPartialName("Microsoft.SharePoint.Client")
    #[System.Reflection.Assembly]::LoadWithPartialName("Microsoft.SharePoint.Client.Runtime")
    Add-Type -Path "c:\Program Files\Common Files\microsoft shared\Web Server Extensions\15\ISAPI\Microsoft.SharePoint.Client.dll"
    Add-Type -Path "c:\Program Files\Common Files\microsoft shared\Web Server Extensions\15\ISAPI\Microsoft.SharePoint.Client.Runtime.dll"
    # site collection
    $siteUrl = “https://mysharepoint.com”
    # admin
    $username = "[email protected]"
    $password = Read-Host -Prompt "Enter password" -AsSecureString
    # get clientcontext as object
    $ctx = New-Object Microsoft.SharePoint.Client.ClientContext($siteUrl)
    # assign credentials to clientcontext object
    $credentials = New-Object Microsoft.SharePoint.Client.SharePointOnlineCredentials($username, $password)
    $ctx.Credentials = $credentials
    # create site from template 'teamsite' => STS#0
    $data = Import-Csv "c:\tools\CSOM\vakwerking_test.csv"
    foreach ($row in $data) {
    $webCreationInformation = New-Object Microsoft.SharePoint.Client.WebCreationInformation
    $webCreationInformation.Url = $row.vakwerkingurl
    $webCreationInformation.Title = $row.vakwerkingnaam
    $webCreationInformation.WebTemplate = "STS#0"
    $webCreationInformation.UseSamePermissionsAsParentSite = $false
    $newWeb = $ctx.Web.Webs.Add($webCreationInformation)
    Write-Host "Title" $newWeb.Title
    #send to sharepoint
    $ctx.Load($newWeb)
    $ctx.ExecuteQuery()

    Hi,
    The command above about creating a group only works for the root site of the site collection, because the scope of the user group is site collection level, these groups
    can be used in all the sites in this site collection.
    With the existing groups in the root site, we can add users into them and grant specific permissions of a specific sub site to these groups.
    Here is a demo about how to assign permission to a group using Client Object Model(though in C#) for your reference:
    http://www.c-sharpcorner.com/UploadFile/54db21/set-permission-to-group-in-sharepoint-2010-programmatically/
    Best regards,
    Patrick
    Patrick Liang
    TechNet Community Support

  • Creating Supplier Site and  manual invoice.

    In order to issue a manual check and keep track of which ISO cash out the check I have to create a new supplier site for 400 ISOs and create invoices manually. How should i create a new supplier site?
    How should i create invoices manually?
    How long does it take to do this?

    In order to issue a manual check and keep track of which ISO cash out the check I have to create a new supplier site for 400 ISOs and create invoices manually. How should i create a new supplier site?
    How should i create invoices manually?
    How long does it take to do this?

Maybe you are looking for