Created users not showing in beekeeper console

Hi,
After creating a user in the beekeeper console, this user does not show up in the "Users" entry. When I click on "Groups" (ALL_USERS), and then the members tab, I can see the user, and my succesfully registered device also shows up under Devices, but the Users entry just states "No Users".
The beectl list_users command does show my user.
Am I missing out on something here?
Thanks!

This problem should be fixed in 1.4.3. Did you upgrade, or is it a fresh install?
If the user was created, does it at least appear if you issue "beectl list_users" ?
--Ruben                                                                                                                                                                                                                                                                                                                                                                       

Similar Messages

  • Active Directory, created users not showing up in list of all users

    I created a user name "test".  However, when I look at a list of all users I only have the 4 users that were created on installation.  When I search for "test"
    it shows up.  Why isn't my user showing up in the list of users?
    I am looking in Active Directory Administrative Center:
     <my Domain> (local) -> Users
    Global Search
    Sorry I cannot provide pictures; I am waiting for my account to be activated.

    You need to look to your search criteria to understand what might be wrong.
    This posting is provided AS IS with no warranties or guarantees , and confers no rights.
    Ahmed MALEK
    My Website Link
    My Linkedin Profile
    My MVP Profile

  • Directory not showing in attendant console

    I have added two new extension on CUCM, Directory not showing in attendant console even after resynch on CUCM and attendant cosnole
    Any idea?

    Under Engineering ----Service Management,can u check LDAP service is running.
    Also, under system configuration ---directory synchronisation ----Enable contact synchronisation is enabled.
    Also, u are creating this user in AD and then, fetching to CUCM and Attendant Console is finally these users as CCM Source.
    regds,
    aman

  • I have added two new extension on CUCM, Directory not showing in attendant console even after resynch on CUCM and attendant cosn

    I have added two new extension on CUCM, Directory not showing in attendant console even after resynch on CUCM and attendant cosnole
    Any idea?

    Hello,
    Can you tell us what versions of CUCM and CUxAC you are using?  Just extensions alone in CUCM will not sync to the corporate directory within the attendant console application.  You will at least have to have user's associated with those extensions and depending on your rule set within the console that should then bring those extensions into the console directory.
    Thanks,
    Tony

  • BPEL Processes are not showing in BPEL Console after OPMN restart

    Hi All,
    BPEL Processes are not showing in BPEL Console after OPMN restart. It was showing earlier before restart.
    Can some one help on this?
    Thanks

    Vikky,
    Are you using 10g?
    If BPELConsole is up but you don't see any process, you can go to the log files and see what is the problem.
    It might relates to permissions, or DB issues etc....
    Arik

  • CIPC not showing on operator console

    Hi,
    We have a strange issue which is doing my head in.
    CUCM Version 9.1.2-10000-28
    Arc Console Operator  5.1.4.1996
    When some users are using CIPC softphones they do not appear to listed as available in the Operator Console, however some users who use CIPC softphones are appearing available in the Operator Console. I've narrowed it down to a CIPC related problem I believe because I asked them to login to a physical phone (we use EM) and seen that a user previously not available in the Console suddenly became available. So I've tried the following:
    1) Restart of CTI Manager service on the CUCM where the Arc CTI related ports are registered to. This resolved an issue with users not appearing available in the Console before, but doesn't resolve this issue
    2) Checked that the CIPC device association is in place on the End User, though it doesn't seem to matter as I have identified CIPC users who are displayed as available without this association in place.
    3) Checked that Allow Control of CTI is enabled in all places (the line DN, the End user, the CIPC)
    4) Compared a few CIPC configurations and couldn't see any noticeable difference between them.
    5) Checked the user details in the Arc Console Operator program and the user is set up for BLF and has the correct device name associated under their contact details. Again, don't believe that the device name association is necessary either.
    At first I thought the reason for this was down to some of the users being logged into their physical phones, thus showing up in the console as registered, but the customer said they created two new users with CIPC only. One I have identified is available in the console and the other one is not showing as available. Judging by the dependency records, there does not appear to be any associations with other phones.
    Has anyone had this problem before and does anybody have any suggestions as to how I resolve it?
    Thanks in advance for any suggestions.
    Cheers

    Hi,
    I don't have any problems using CIPC at all. The problem is that from the Arc Operator Console they are not showing up as available, so let's just say an inbound call comes into the receptionist and the receptionist wants to transfer the call. Because the user is not showing up as available from the perspective of the Console, the receptionist cannot transfer that call to the user. The CIPC devices are registered to CUCM, but there are those who are present in the Operator Console database who are not showing as available and there are those who are in the Operator Console database who are showing up as available.
    Admittedly the CIPC are not set up using EM for the reason that we didn't want the users going through the extra hassle of logging in and out of the CIPC, but that's a step we can take. It doesn't explain why some are showing up from the Console and other's don't though.
    My gut feeling is it's not CUCM, but any other checks that can be suggested would be appreciated.

  • New tables & indexes created do not show up in dba_segments view

    Dear all,
    I have created 3 tables and some indexes, but these objects do not show up in dba_segments view. Is this a normal behaviour? Previously, with dictionary managed tablespace, I can specify the minimum extent to create, when the table/index is created. But I'm not sure how the locally managed tablespace work. Please do advice. Thank you very much in advance.
    I'm using Oracle 11g R2 (11.2.0.1.0) for Microsoft Windows (x64), running on Windows 7.
    For the purpose of reproducing this issue, I have created the tablespaces as follow:
    CREATE TABLESPACE CUST_DATA
    DATAFILE 'd:\app\asus\oradata\orcl11gr2\CUST_DATA01.DBF' SIZE 512K
    AUTOEXTEND ON NEXT 256K MAXSIZE 2000K
    EXTENT MANAGEMENT LOCAL UNIFORM SIZE 256K
    SEGMENT SPACE MANAGEMENT AUTO;
    CREATE TABLESPACE CUST_INDX
    DATAFILE 'd:\app\asus\oradata\orcl11gr2\CUST_INDX.DBF' SIZE 256K
    AUTOEXTEND ON NEXT 128K MAXSIZE 2000K
    EXTENT MANAGEMENT LOCAL UNIFORM SIZE 128K
    SEGMENT SPACE MANAGEMENT AUTO;
    CREATE TABLE CUSTOMER_MASTER (CUST_ID VARCHAR2 (10),
    CUST_NAME VARCHAR2 (30),
    EMAIL VARCHAR2 (30),
    DOB DATE,
    ADD_TYPE CHAR (2) CONSTRAINT CK_ADD_TYPE CHECK (ADD_TYPE IN ('B1','B2','H1','H2')),
    CRE_USER VARCHAR2 (5) DEFAULT USER,
    CRE_TIME TIMESTAMP (3) DEFAULT SYSTIMESTAMP,
    MOD_USER VARCHAR2 (5),
    MOD_TIME TIMESTAMP (3),
    CONSTRAINT PK_CUSTOMER_MASTER PRIMARY KEY (CUST_ID) USING INDEX TABLESPACE CUST_INDX)
    TABLESPACE CUST_DATA;
    SQL> SELECT TABLE_NAME, TABLESPACE_NAME
    2 FROM USER_TABLES
    3 WHERE TABLE_NAME LIKE 'CUST%';
    TABLE_NAME TABLESPACE_NAME
    CUSTOMER_MASTER CUST_DATA
    SQL> SELECT INDEX_NAME, TABLESPACE_NAME
    2 FROM USER_INDEXES
    3 WHERE TABLE_NAME LIKE '%CUST%';
    INDEX_NAME TABLESPACE_NAME
    PK_CUSTOMER_MASTER CUST_INDX
    SQL> SELECT SEGMENT_NAME, SEGMENT_TYPE, TABLESPACE_NAME, BYTES
    2 FROM USER_SEGMENTS;
    no rows selected

    Prior to 11g, when you created a table or whatever, you automatically allocated one extent.
    This is now no longer true and depends on a parameter I don't remember.
    dba_segments is a summary of dba_extents.
    Obviously, if there is no extent allocated, the table (view is defined with inner join) will not show up.
    You could qualify this is as a bug and submit a SR to Oracle. But then the performance impact may be huge.
    Sybrand Bakker
    Senior Oracle DBA

  • Created playlist not showing up when iPhone is plugged in

    I'm using an iPhone 5s on iOS 8.1.2. I have created music playlists on my phone but when its plugged in they would not show up on the sidebar. My library shows up fine but when i try to look for my playlists they aren't there!!! Any help would me much appreciated.

    Hi Michelle-
    iTunes is not compatible with XP's Fast User Switching feature, which allows more than one person to be logged into the computer at the same time.
    You can disable this by going to Start/Control Panel/User Accounts then 'Change the way users log on and off' and remove the checkmark from Fast User Switching.

  • New OID users not showing up in Outlook

    Hello,
    When I create a new user in OID the user does not show up in the Oracle-Global Address List on a particular machine. The user does show up in the web client and if I configure outlook on another machine with the same user info I can then see the new user. Does anyone know why machine 1 is not getting the new user info?
    Thanks

    Outlook caches the GAL entries, so you might need to download (refresh) your address book. In Outlook 2002, this is done by:
    Tools -> Send/Recieve -> Download Address Book.
    Depending on your settings, Outlook may get a new address book every time it starts up. This can be configured by:
    Tools -> Options -> 0racle Connector -> Calendar:
    check "Automatically refresh the GAL when working online".

  • AD Users not showing up in Workgroup Manager

    Hi, I'm configuring a new installation of 10.4 server on an Intel Xserve to integrate with an already existing AD domain and provide group policies to Mac users via OD.
    So far, the install has been so smooth, fast, and simple. The Xserve has been joined to the AD domain, Kerberos is running, and I have an active OpenDirectory Master.
    Now, when I go to Workgroup Manager, the users in the AD domain do not show up and if I try to authenticate with the same username and password I used to bind to the domain I get the error "The login information is not valid for this server". Also, if I use dscl I can navigate to "/Active Directory/All Domains/Users" but if I try to run ls I get "ls: DS error: eDSCannotAccessSession".

    Hi Tim
    You are almost there but not quite.
    Firstly its not important if the AD Server does not have a reverse pointer. As long as the OD Master does that should be enough. Ultimately it would be better if there was one configured but there is not much you can do about that is there? I doubt very much if the AD Admin is going to want to fiddle with a 'live' DC's DNS Service if its likely to affect his domain?
    What I generally do is this:
    Make sure SMB Digital Signing is Not Enabled on the AD Server. There should be at least two places where this has to be disabled. If the 'powers that be' have defined SMB Digital Signing then SFM (Services For Macintosh) must be installed. If its 'nada' to both then you will be severely limited in integrating OSX Server and mac clients with AD. Yes of course make sure there is an (A) and Reverse PTR for the mac server. Next bind all mac clients to the AD Server and make sure the AD Server is listed first for Authentication and Contacts, also make sure mac clients are using the AD for authentication. Test and verify a mac client to see if (a) home folders are created and accessed and that mac clients successfully log in. You sometimes don't get the two.
    Now turn your attention to OSX Server. Make sure you have (a) reserved a fixed IP address for it in the AD's DHCP Service and you have placed the AD's IP address as the primary IP address in the DNS Server's field in the Network Preferences Pane (b) tested DNS fully and that OS X Server resolves correctly on the forward and reverse pointers for itself. Now bind OSX Server to the AD using the Active Directory plug in in Directory Access and an AD admin account that has authority for the Domain. Launch Workgroup Manager and you should see AD Users and Groups have 'flowed' into the /Active Directory/All Domains node. Quit out of WGM and launch Server Admin. Enable the AFP Service and set the authentication method to Any Method. Select Open Directory and change the Role from Standalone to Open Directory Master. You will be prompted to create the default Directory Administrator account diradmin (UID 1000). You should see the Kerberos Realm and search base fields autofill with the fqdn of the Server. Change both of these to reflect the fqdn of the AD Server. For example if the fqdn of your mac server is osxserver.addomain.com and the windows server is adserver.addomain.com then change the information presented in thos fields to ADSERVER.ADDOMAIN.COM and dc=adserver,dc=addomain,dc=com. As you can see you should only need to change the first part. Click OK or Continue and you should now have an OD Master that is not the KDC (Kerberos has been stopped). This is the state you want it be in before going any further. You can now 'kerberize' the AFP Service you started previously by selecting the kerberize button and using the same AD admin account you used to previously bind the server to the AD. To doublecheck if the AFP Service has been kerberized launch terminal and issue:
    sudo kadmin.local -q list_principals
    You should see an entry for [email protected] amongst others.
    Now launch Directory Access and make sure the server's loopback address is listed in the LDAPv3 plug in. Make sure that the server is listed first in the Authentication and Contacts fields. Quit out of Server Admin and launch WGM. Navigate to the /LDAPv3/127.0.0.1 node and you should see diradmin waiting for you. Open another connection window in WGM and navigate to the /Active Directory/All Domains node. When you authenticate the /LDAPv3 node you use diradmin, when you authenticate the /Active Directory node you use the AD admin account. Create a Group in the /LDAPv3 node select the + icon and toggle between the two nodes as you select users or groups and add them to your /LDAPv3 node. Once you are happy select a preference to manage, apply desired changes and save the changes. This is better done on a client machine with the Server applications installed.
    Back to your mac clients. Begin to join these to the LDAP node using the LDAPv3 plug in in Directory Access. Use the Server's IP Address or its FQDN if the DHCP Server is also doling out DNS information to networked clients. Its IP address should be good enough. Don't bother with authenticated binding and make sure clients are not using the OD master for authentication and contacts. Lastly make sure the Active Directory/All Domains and the /LDAPv3/OD Master IP address or fqdn are in that order for browsed directories.
    Its best if you have a secure local admin account on all your mac clients and that each mac is named differently. Set this in the Sharing Preferences Pane.
    Begin to test. If everything is OK you should now have mac clients logging into home directories controlled by AD as well as OD Managed Preferences being applied.
    One final thing. Avoid using .local as the basis for the DNS Service. I realise in your environment you have no control over that. In which case make sure all mac clients have the AD's .local domain name in the Search Domains field in the Network Preferences Pane. If your clients have Leopard installed you should not have to bother as Leopard copes with .local name resolution better than previous versions of the OS.
    As ever how successful you are and how long it takes will depend mostly on how well the AD is configured. There is no magic bullet that can be used on the mac side to fix a poorly configured AD environment. If everything is as it should be regarding the AD Server it should not take you longer than 10-20 minutes (after server installation) for the server and possibly 2-3 minutes for each client. It really should not take that long.
    Does this help?
    Tony

  • Why doesn't default CREATE USER form show a "Check"  Page before submitting

    Hi
    Interesting question.
    When I create a User (using my Customized Create User Form), and I press SAVE, the Form is submitted immediately. There is no "stop-and-check" page, which allows one to review the entries made BEFORE submitting the form itself.
    For example : when EDITING or UPDATING a User, and you press "Save", the form is not submitted right away. Instead, a new page opens, where you can review the changes you made, to ensure that they are correct. In fact, at the bottom of this new page, there are 4 standard buttons : SAVE...........RETURN TO EDIT............CANCEL
    This is a very good system, because it allows you to check your entries, and make sure they are correct, before pressing SAVE again to submit.
    However, the "Create User" form does not have this same arrangement.
    Is there any way to customize the Form, so that, when creating a User, and you press SAVE, a "check-page" first shows up (just like when updating/editing a user) ?
    Thanks

    Hi
    Interesting question.
    When I create a User (using my Customized Create User Form), and I press SAVE, the Form is submitted immediately. There is no "stop-and-check" page, which allows one to review the entries made BEFORE submitting the form itself.
    For example : when EDITING or UPDATING a User, and you press "Save", the form is not submitted right away. Instead, a new page opens, where you can review the changes you made, to ensure that they are correct. In fact, at the bottom of this new page, there are 4 standard buttons : SAVE...........RETURN TO EDIT............CANCEL
    This is a very good system, because it allows you to check your entries, and make sure they are correct, before pressing SAVE again to submit.
    However, the "Create User" form does not have this same arrangement.
    Is there any way to customize the Form, so that, when creating a User, and you press SAVE, a "check-page" first shows up (just like when updating/editing a user) ?
    Thanks

  • User not showing after restoring from time machine backup

    I was having issues with my 2009 Macbook pro. took it to the Genius Bar. Diagnosistics all showed ok. (I had done troubleshooting before I had the appointment). They suggested wipe and reinstalll from my time machine backup. I agreed.
    Returned home to do the reinstall. When I went to log in found that one of my user accounts did not show in the log in - only my main and "guest" accounts. On checking the "users" folder the user is present. It also does not show in the system preferences user screen but when I try to recreate it says it exists. Note I have done this wipe and reinstall with Mavericks
    Help! Most of the content I have on my main BUT there are several things that are not.
    Thank you for your attention.

    Issue solved with visit to Genius Bar.
    As I understand it here are the steps the Genius did. Attempt to create the account (system preferences->users) with the same information. It will say it already exists. Very carefully read the options. One will say use the existing account. BE CAREFUL because one option will wipe your data.
    If you need to do this it might be worth the trip to the Genius Bar as you could wipe your data. One precaution I took was to bring a full copy of that user account onto my desktop (from the backup immediately before the wipe) in addition to the one in the user folder. Once we verified that the account was working I moved the desktop copy to the trash and again verified the account (just to be safe).
    Hope this helps someone else.

  • New users not showing up while trying to set folder permission settings

    Server 2012
    This is a new virtual domain server and file server in a starwind cluster, I just started migrating users last week.
     This last weekend (two days ago) the cluster crashed while doing windows updates on this server. I have been unable to get it to download any updates since without crashing, not sure if that is related to this issue somehow.
    I added some new users today and got them all logged in and their data transferred over. good. But then I went to this shared folder that everyone has a mapped drive too and tried to add them in the security tab of a sub folder but their accounts will not show
    up when I search for them. Any account I added previously to last weekend  show up, students, mine, etc.
    even if I select the exact OU the accounts are located in, even if I type their whole name and domain. In AD the accounts are there.
    If I log into the backup domain controller Their accounts show up there while in a folder security settings tab. They are listed in active directory on both domain controllers.
    I have exhausted myself on Google search.
    What the heck did I break?
    Maybe I should run 
    DISM.exe /Online /Cleanup-image /Restorehealth
    Not sure if I will lose any data doing that or what the repercussions would be..

    Hi Dustin,
    If the DC is having USN rollback issue, we can resolve it by demote then re-promote or restore the DC using a supported method such as using System State backup to restore.
    More information for you:
    USN Rollback, Virtualized DCs and improvements on Windows Server 2012
    http://blogs.technet.com/b/reference_point/archive/2012/12/10/usn-rollback-virtualized-dcs-and-improvements-on-windows-server-2012.aspx
    Best Regards,
    Amy
    Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • Debugging mode - sql query not showing up in console

    Hi,
    I have turned on the debugging mode via Admin->Server Configuration->Debug Level. Set it to debug mode.
    I restarted the server. I wanted to test if the query will show up if there was an error in the query.
    However I am not seeing any query. It complains that there is some error, but doesn't show what query string it is using.
    Anyone got any idea how I can get query to show up on console (BI Publisher web interface) as opposed to
    going and seeing the log files on the server.
    Please let me know.
    Thanks
    Girija

    Thankyou Vetsrini.
    I will try out custom log table approach.
    I see that there is a way to test pl/sql scripts via the DBMS output
    and for that we need some invoking program like SQL PLUS to get the
    log out into a file.
    However, we wanted to see if there is a way to set Pl/SQL log files
    and get PL/SQL logs when the calling program is BI Publisher.
    regards
    Girija

  • Newly Created Branches not showing up for Recruiter in the Requisition.

    Hi,
    We have created Branches as Administrator and the Branches are not showing up for Recruiter when trying to create the requisition. Any suggestion on this will be great help.
    Thanks.

    Hi,
    the most common reason for branches not showing up is caused if someone does not use the frontend for administrator but the IMG nodes for creating branches and assigning to companies. This is caused by missing bp role assignment.
    So check the branches in TCODE BP that they have the role for e-recruiting branch assigned. The standard delivey uses bp role RCFBRA but this can be changed in T77S0 RECFA BRARO.
    Furthermore you should check if T77RCFBRANCHCOMP entries are ok.
    Kind regards
    Roman

Maybe you are looking for