Creatednew event and put it in SWEC
Hi,
I created a new event for buss obj BUS2081 by extending it.
I put this in SWEC and put the radio button on 'on create'
but the event did not occur while creating the document but it occured while changing the document
further i checked in SWED and checked the Action:create checkbox for INCOMINGINVOICE change document as that is the one for BUS2081 (incoming invoice document)
even then the new event occurs only while changing the invoice document and not when creating it.
could you please help me to figure out what i have missed ??
thanks
Helo JMB
I needed to create a new event because I wanted event "parked with block".
There is event blockedprice available but that is only for posted document.
Hence I needed to create new event.
thanks
R
PS . there was some problem experienced in the sdn site last week. I was not able to login to the forums page with my ID. So I to wait till the problem was resolved before I could reply
Similar Messages
-
As the title says I need help on how to take a photo from one event and put it in another, without dragging to desktop and dragging back into iPhoto and moving it to the event folder I want it in. Right now when I want to move a picture from one event to another I drag it to my desktop then delete it from iPhoto then I drag it back into iPhoto and put where I want it.An example would be taking a photo from the Christmas event and add it to a specific person event. Can I do that within the events section without all the dragging. Also is there anyway I can remove duplicates from iPhoto without going through each and every file. Any help would be greatly appreciated.
Apple doesn't make it easy to do what you want. However, here's how I do it.
Select the photo you want to move and create a new Event for it via the Event ➙ Create Event menu option.
In the Event mode select the new Event with the one picture and drag it onto the Event you want to move the photo to. -
I had photos from MobileMe organized into different events. When iPhoto made a MobileMe event (when MobileMe ended), it took all of those photos out of the other events and put them all together in the new "from MobileMe" event. Is there any way to reverse this?
Only to load your backup from before downloading the MM photos
LN -
Cannot copy pics from one event and paste them in another...not sure why?
Anyone know a solution? It's almost like the event album is locked or something...
What if a user wants the same photo in two separate events?
In my case I have an event for a movie project and I want to take a movie from my 2012 spring event. I do not want to cut it from the 2012 spring event and put it ONLY in the movie project event. I want to COPY it so I have it in TWO SEPARATE EVENTS.
Why is this not possible? -
In iPhoto9, I used to be able to duplicate a photo and put it in two different events. Is there a way to do this in iPhoto11?
In your description you say the first document opens as the Title you gave it.
Templates always open as Untitled so it sounds like you have saved a regular document, perhaps into your templates folder which is possible.
Since you have already worked on it and it has been previously saved, Lion will now Save for you and Save a Version is available
The other document does open as Untitled so sounds like a real template and as Peggy has pointed out will not have either Revert nor Save a Version until you Save it and have changed something in it.
This is a classic example of just how Apple's supposedly "simplification" of the process, is leading to confusion of what has happened. That the conditions and resulting actions from those conditions is so convoluted says it all.
It all reminds me of the Monty Python Life of Brian sketch with the "simplified" John Cleese instructions to the class, as to if you have a brother in an older dorm whether to hang your hat and bag on the hooks provided. The trouble is Apple does not get the joke, that it is transforming itself into a frequently self contradictory bumbling bureacracy. The price of unchallenged self appointed geniushood.
The incoherent half baked stumbling juggernaut has reached new triumphs with its edict on enforced Sandboxing on developers when it is unable to follow even its own instructions.
Peter -
Where best to put Events and Projects with multiple drives...
I just got a new iMac, and I need to know how to maximize its speed with FCPX in terms of hard drives.
My old iMac had two internal drives: a 256 GB flash drive and a 2 TB standard drive. On that iMac, I had the OS and FCPX on the main internal SSD, and my events and projects on the secondary internal drive (the magnetic internal drive).
My new iMac is the latest 27" iMac with an i7 3.5 GHz, 32 GB RAM, and an NVIDIA GeForce GTX 780M 4GB GDDR5 video card. It also has USB 3.0 and Thunderbolt, and only one internal drive: a 512 GB SSD drive. I am connecting a 6 TB OWC external magnetic drive (with 128 MB cache) to my new iMac via a LaCie Thunderbolt to eSATA adapter (the drive and adapter are a combination that OWC sells, has tested, and recommends). I plan to use Disk Utility to make this 6 TB external drive (which is 3 TB + 3 TB hard drives in one enclosure) raid 0 for fastest speeds.
With this new setup, my initial thought is to put both my FCPX events and projects on this 6 TB external drive. But is that the best option? Would it be better to get another high speed external Thunderbolt drive and put the events on one drive and the projects on another? I have a feeling that putting them on one drive is the way to go, and that there would not be much, if anything, to gain by putting the events and projects on separate drives. But I'd really appreciate any advice.
Thanks!Hi Russ--
Only in the past year I have implemented a backup strategy. I've never had an internal hard drive fail. Until recently, I had never had any drive failure. Then I bought some desktop external drives from Seagate and paid quite a bit more for Seagate's FW800 adapters for them (my last iMac only had FW800 and USB 2.0). The drives kept getting corrupted, so I was copying terabytes of data back and forth to restore the affected data. Turns out it was the FW800 adapters all along. Seagate was aware of the problem, and had a firmware upgrade, but has done absolutely nothing to publicize the fact. I'll never buy their stuff again.
But I'm still using Carbon Copy Cloner (great software, great support), and now that I switched back to the original USB 3.0 interfaces, the Seagate drives are reliable. So I will continue to use CCC and those drives as my back-up strategy. I was playing with fire for decades by not doing any backups. It's ironic that I only started having problems when I started to back things up!
The speed of the 512 GB internal drive on this new iMac is insane (the external drive arrives tomorrow, so I don't know about it yet). The internal SSD drive clocks in at 697 write and 723 read (compared to 179 and 207 on my old iMac's internal SSD drive). I am anxious to see what the external drive clocks in at tomorrow. -
I put an event on my calendar and within five minutes it gets deleted. I never delete any events. I already went and synced to all events and it still does it. I want it to stop. Can someone please help me?
go to settings>mail contacts and calenders> check and see if your calender is on under your email.. if so it is probably syncing to your emails calender and not the calender app on your phone..
-
I have tried everything to get it to add events, and there's nothing on the internet that has been helpful so far. It could just be a bug or something. I don't know. Please help me if you know how to fix this.
It is possible that your anti-virus software is corrupting the downloaded files or otherwise interfering with downloading files by Firefox.<br />
Try to disable the real-time (live) scanning of files in your anti-virus software temporarily to see if that makes downloading work.
See "Disable virus scanning in Firefox preferences - Windows"
*http://kb.mozillazine.org/Unable_to_save_or_download_files -
IPhone calendar does not sync new events and appointments from Outlook
iTunes 9.2.0.61/iPhone 4.0.1 - does not sync newly added events and appointments! Previously added stuff is all there, new stuff added in Outlook 2007 just doesn't show up. I've gone back to my old Palm T|X which syncs all this stuff with no problem, so it's not an Outlook bug.
It looks like Apple has put a team of junior programmers on the Calendar app - I've seen leap-year bugs (still there), events showing up on the wrong day (still there), and I'm still waiting for the "week at a glance" view. Calendar is SO important for business use that top level "gray beard" engineers need to be on this. (Question for Apple's calendar developers: what's Zeller's Congruence? It they haven't heard of it they have no business doing calendar programming.)Spontaneously started syncing again - no idea why now, nor why it failed for so long. Related to the alarm bug? Who knows...
-
OBIEE 11g: Inconsistencies with Master-Detail events and Navigate to BI
Hi everyone,
I'm getting some pretty annoying inconsistencies with the Navigate to BI Content action as well as the Master-Detail events. Basically the main issue I get is that 90% of the time, the click does nothing.
It's a pretty simple setup, I am setting up bulb gauges to act like a fancy column selector. The bulb gauges are setup to pivot based on a Metric Type column. The goal is that if you click on "Metric 1" bulb a trend report should refresh to show Metric 1. If you click on the "Metric 2" bulb, the same trend report will show that metric.
Here's how I implemented it:
Dashboard Tab A -- Uses Navigate to BI Content
1) I have a prompt on Fiscal month in dashboard tab A.
2) I created the bulb gauge and put it in dashboard tab A
3) Setup the interaction on the bulb measure to navigate back to Dashboard Tab A.
3) Prompted the trend on Metric Type column and put it in dashboard tab A.
4) In theory, clicking on the bulb, should navigate back to the same tab and update the trend report appropriately
5) In reality, nothing happens.
6) The only way I can get the navigate to work is if I first change the value in the fiscal month prompt and click Go. Then I click on the bulb and the navigation will work ONCE. After that it's broken again.
Dashboard Tab B -- Use Master Detail -Events
1) Pretty much same situation as dashboard A, but instead of navigate to BI Content, I use the master-detail events.
2) Pretty much the same results. I cannot get it to consistently work, in fact the trick with the filter didn't do anything.
3) One thing I tried was cleared my browser history completely (Mozilla Firefox) and then launched the page. It work for about 5 clicks and then stopped.
Either way, neither of these are working properly for me.
Has anyone else had these issues?
-=Joe
Has anyone else had an issue with this?So someone explained to me that master-detail events only occur within a single report. They cannot be used to communicate across two different reports.
That is significantly less useful than I originally thought. I honestly that it was a method of communication for one report to update other target reports that are all listening on the same channel. That would have been a powerful feature. A single report refreshing other views in the same report is still useful, but not as much.
That being said, I still don't understand what the heck is going on with the navigate to BI content feature. I've been testing it out. It works with pivot tables and regular tables. But the moment I add a graph, gauge or even a "Filter" view into the dashboard page, the click stops working. Really really strange stuff. -
Managing Events and/or Projects With Disk Images
I came across this method of managing Events and Projects a while ago. I finally got around to giving it a try. Personally, I really like this method.
It's simple.
It keeps things very well organized.
It's easy to open only the project or events that you want.
It's easy to consolidate and back up once you're done.
It takes some workload off FCP X by not having to always open up all your Events and Projects.
So, I thought I would share this for those of you who were not already aware of it.
This is my workflow: (based on the link below)
I create a Disk Image (named for the Event/Project).
(Note: There are two places to create the name, I use both, keep them the same)
I open up FCP X.
I typically put only one Event on this Disk Image.
I then reference whatever Media I need in this Event.
I usually don't bother to copy the media. (except when I'm done and I archive it)
You can create multiple Events, if you feel the need for additional organization.
Then I create however many Projects I need.
(since Projects equates to Sequences from prior FCP versions)
I have a unique Disk Image for each Event/Project that I work on.
To use them ...
First, always make sure FCP X is not running.
Locate the Disk Image in finder.
Double click on the Disk Image and it will Mount on your desktop.
(assuming it's not already mounted on your desktop)
Open up FCP X and it will load the Event(s)/Project(s) in the Disk Image.
If you don't want to work on an Event/Project in FCP X (make sure FCP X is not open), in Finder, simply Eject the Disk Image.
Now when you open FCP X, it won't be there.
Its not gone, but since it's not mounted on the desktop, FCP X simply doesn't see it.
To get it back (obviously quit FCP X first) simply double click the Disk Image in Finder and it remounts.
Open FCP X and you can see it's back.
You can open (double click to mount) as many Event/Project Disk Images as you want.
Just make sure you mount and un-mount disk images when FCP X is not running.
If find this to be a great workflow.
Many thanks to Steve Martin of Riple Training for posting this method.
http://www.kenstone.net/fcp_homepage/fcp_x_managing_disk_image_martin.htmlRe the final commercial spot. What I am getting at is if all my media is optimized and therefore in ProRes, and I export in ProRes using the current settings, then shouldn't the media needed to rebuild the project be the same or close to what an exported Quicktime would have been?
Perhaps the notion of "used clips only" is not what it says then. I took that to be the "media managed" feature otherwise why is that wording there. I guess "used" actually refers to all of the media for the project and associated events rather than just for the project. This is misleading because the DUPLICATE operation and menu prompt only appears as a result of requesting an action on the project item.
There are aliases in my original event folder, but before I started this process tried to get FCPX to consolidate media for the project and it already was according the app. Truth is, some of the media is outside of the FCPX required folders. So it's strange that it says it's consolditated, but it's not and yet in duplicating the project it moves the references to the new volume only to point back to the old volume.
So my next question would be: Is there no feature to back up only what's needed to rebuild the final project (edit) reliably. Moving the project moves everything. According to the FCP manual, it seems using the Duplicate feature is the way I should be archiving. However if by "used clips only" FCP X means all media and refrerenced events, then I guess there's nothing for me in here. However then, whey would there be an option (after choosing duplicate project) an option to Duplicate Project and referenced events. If "used clips only" means all media, then there's no difference between the 2nd and 3rd Duplicate Project options.
Thanks Tom. -
Moving Events and Projects from one location to another on the same hard drive.
Hello.
I've searched in the FCP X User Manual, on this forum and in Google, but have found no explanation of how to do this, so I'm posting this here in hopes that someone in our community will be able to help.
I've previously stored my FCP X Events and Projects folders on an external 3TB hard drive, because there is more room on it than on the internal 1TB hard drive, but, since then, I've worked with other media apps, for video, photography and audio, the files for which are also stored on the external hard drive, and this has created a bit of clutter with no folder structure to keep it tidy.
I like an organised file structure on my system, to keep it uncluttered, easy to navigate and efficient to use, so I put all the files for my photography, video and audio apps into their own folders, which are, in turn, stored in their appropriate folders for Audio, Photography and Video, and those three folders are stored in a folder called Media, and then I directed each app to its own files.
The only app with which this has been a problem is FCP X. While there is a way of relocating projects and events from within FCP X, it allows the user to move them from one hard drive to another, and not, as I want, from one place to another on the same hard drive.
I'm not sure if it matters, but perhaps it's relevant to mention before the next paragraph that the files that had previously been imported as events are, to save hard-drive space, stored in the events folder as shortcuts to the original files, which are stored elsewhere on the drive, rather than as duplicates of those files.
In Finder, I copied the Events and Projects folders to their intended new locations and tried in the app to link the events and projects to their new Finder location. It seemed to have worked, until I moved the original folders to the Trash. On re-opening FCP X, it was clear that the linking hadn't worked. I returned the original folders from the Trash to their original location, but that didn't entirely reverse the problem. I noticed also that, in the original and duplicated Events folders, the shortcuts had lost their links to the original files stored elswehere on the drive.
Fortunately I had run a backup before starting, so I restored the original folders and the app from the backup, and all was back to normal.
I'd be grateful if anyone could advise me on whether or not it's possible to move FCP X events and projects from one place to another on the same hard drive with the app's compliance.
Thank you.Ludio wrote:
I'd be grateful if anyone could advise me on whether or not it's possible to move FCP X events and projects from one place to another on the same hard drive with the app's compliance.
I
Message was edited by: Russ H Apparently mis-read the questions. -
Another way to look at Events and albums (smart and dumb)
Maybe this will help others, but I had an epiphany regarding iPhoto 08 and the organizational method (or lack there of) in regards to Events and albums, etc.
Here it goes: iPhoto is now iTunes for pictures. I know it has been said before, but this time it truly is.
When you import a CD with iTunes, it creates a directory of songs in your library. When you import a group of pictures in iPhoto, it similarly imports them as an event. Events = CD's, plain and simple.
Think of searching for photos the same way you would search for songs. By typing in the artist, the album the specific title - etc you can easily find a song. With events, all the pictures are linked to the title of the event, so searching is very easy and fast.
Gone are the days of complicated hierarchy systems in Winamp or iPhoto 06. If you want a photo, you type the name of the event - or a keyword tagged into the photo.
But say you want some albums of specific songs, or in this case, photos. You can create albums or smart albums to accomplish this for quick access. Or maybe a Christmas album that automatically updates with every christmas photo entered and tagged.
I am an Aperture user and all my folders are setup like this:
Vacations --> Beach --> Florida --> 2007
If I switched to iPhoto, they will be created in a simple event, for example:
Florida Beach Vacation 2007
Now every picture within that event name would be searchable by typing in florida, beach etc. Even deeper, by tagging individual photos by the person's name or any other photo-specific info, these pics would even be more searchable.
Anyway, I hope this helps some people grasp the new concepts of organization in iPhoto 08. Surely it can be done several different ways, but I think this may be the best way to do it.Events = CD's, plain and simple.
Great analogy! May I then add,
Albums = playlists
I see people here asking why a photo can't be in an album and in No event; perhaps the iTunes analogy would be helpful to them. If you don't have the song in your library (because you don't have that CD) then you can't put it in a playlist. (Nevermind that you can download single songs now - it doesn't fit the analogy. Remember when you had to buy the hard copy.)
Thanks for the information.
Regards. -
Automator: Create folder from suffix of filename and put file names with same suffix into folder
I've been using a script to use automator to create a folder from the filename and put that file into it the folder just created.
I have a bunch of files that have similar names to them, but I don't want every file to be put into its own folder, instead I want all files with the same suffix (001) to go into the same folder. I would also like the folder name to just be named the same as the suffix (001) instead of the full file name.
For example all of these files names that end with the same integer (001) should be dumped into the same folder named "001":
Boston_ProRes422_1920x1080_24p_Audio_001
Boston_ProRes422_3840x2160_24p_Audio_001
Boston_ProRes422_3840x2160_24p_RAW_Audio_001
Boston_ProRes422_1920x1080_24p_Audio_002
Boston_ProRes422_1920x1080_24p_Audio_005
Boston_ProRes422_1920x1080_24p_Audio_010
Any help at all would be incredible!!
Thanks!
Here's the script I'm using right now:
on run {input, parameters} -- create folders from file names and move
set output to {} -- this will be a list of the moved files
repeat with anItem in the input -- step through each item in the input
set {theContainer, theName, theExtension} to (getTheNames from anItem)
try
set destination to (makeNewFolder for theName at theContainer)
tell application "Finder"
move anItem to destination
set the end of the output to the result as alias -- success
end tell
on error errorMessage -- duplicate name, permissions, etc
log errorMessage
# handle errors if desired - just skip for now
end try
end repeat
return the output -- pass on the results to following actions
end run
to getTheNames from someItem -- get a container, name, and extension from a file item
tell application "System Events" to tell disk item (someItem as text)
set theContainer to the path of the container
set {theName, theExtension} to {name, name extension}
end tell
if theExtension is not "" then
set theName to text 1 thru -((count theExtension) + 2) of theName -- just the name part
set theExtension to "." & theExtension
end if
return {theContainer, theName, theExtension}
end getTheNames
to makeNewFolder for theChild at theParent -- make a new child folder at the parent location if it doesn't already exist
set theParent to theParent as text
if theParent begins with "/" then set theParent to theParent as POSIX file as text
try
return (theParent & theChild) as alias
on error errorMessage -- no folder
log errorMessage
tell application "Finder" to make new folder at theParent with properties {name:theChild}
return the result as alias
end try
end makeNewFolderThanks Neil for the response! That script didn't work, but I did get it to work with my old script by changing "set TheName to" numbers different. Here's my final script which creates folders named "001", "002", and so forth and dumps in the files that end in that same suffix in the matching folder.
on run {input, parameters} -- create folders from file names and move
set output to {} -- this will be a list of the moved files
repeat with anItem in the input -- step through each item in the input
set {theContainer, theName, theExtension} to (getTheNames from anItem)
try
set destination to (makeNewFolder for theName at theContainer)
tell application "Finder"
move anItem to destination
set the end of the output to the result as alias -- success
end tell
on error errorMessage -- duplicate name, permissions, etc
log errorMessage
# handle errors if desired - just skip for now
end try
end repeat
return the output -- pass on the results to following actions
end run
to getTheNames from someItem -- get a container, name, and extension from a file item
tell application "System Events" to tell disk item (someItem as text)
set theContainer to the path of the container
set {theName, theExtension} to {name, name extension}
end tell
if theExtension is not "" then
set theName to text -5 thru -((count theExtension) + 4) of theName -- just the name part
set theExtension to "." & theExtension
end if
return {theContainer, theName, theExtension}
end getTheNames
to makeNewFolder for theChild at theParent -- make a new child folder at the parent location if it doesn't already exist
set theParent to theParent as text
if theParent begins with "/" then set theParent to theParent as POSIX file as text
try
return (theParent & theChild) as alias
on error errorMessage -- no folder
log errorMessage
tell application "Finder" to make new folder at theParent with properties {name:theChild}
return the result as alias
end try
end makeNewFolder -
Attempted to import 6.5 GB of (v. 7.1.5) iPhotos from old iMac to new iMac (v. 9.2) using Migration Mgr. over fire wire. All photos (plus many dups) appeared in EVENTS and PHOTOS in the new Mac – but NO ALBUMS. I read a previous response to a similar question -- to copy the pictures library to the new computer. How best to do that?
There's actually an option to iPhoto Library Manager that makes this all almost work flawlessly (and work well enough for me). With the exception of Photo Albums that the pictures are part of, if you select "Library > Rebuild Library..." and then select "Scavange Orphaned Photos" check box, then it will put all the Photos and Movies into the "Scavanged Photos" album. It matches the modified pictures to their originals. It preserves all the event names and photo groupings. All the meta-data I could spot check it got right (although with 44k pictures, I only checked a few). If you fail to select this option, however, it will find no pictures at all when it goes to rebuild the library (this was true of the small test libraries I tried as well as the big, monster 280GB library I just finished converting). The conversion process took 5 hours to run, but in the end produced a library my new iPhoto can read and that I can interact with. I'll be suggesting to the iPhoto Library Manager folks a notation that would estimate the number of Orphaned Photos and display that number as a hint to the user that the option would be useful.
Edited: Thanks to Old Toad and LarryHN for their help in finding which of the many options to transition this library to 9.5.1 I needed to use. Sorry if I took my frustration of the past several months out on you guys for generously trying to help me.
Maybe you are looking for
-
When I open pdf's from our homepage the pdf is now loaded in my Adobe acrobat instead of directly in the browser as it did before. How do I fix this? Regards, Rolf
-
after restoring definitions iphone 3gs does not works
-
I've seen a number of queries where LD has chosen an index (in-memory) or merge join when a parameter-passing join would have been much more efficient. Optimization hints can be used to encourage LD to use parameter-passing joins. These are described
-
Newbie question: Designing a contact info retrieval based on filters
Dear all, I am new to SSAS trying and need help in designing this reporting requirement Filter for Customers based on dimensions (regular and fact) in various tables related by many-to-many relationships With this list of Customers, retrieve their co
-
HT1657 Do I need wifi to watch a rental movie?
I want to download movies on my laptop so that my child can watch on a car ride where we won't have wifi. Is this possible? Or must you have wifi to watch a rental movie?