Creates new record in the Qualifier Table while importing.

Hi Guys,
When sending new bank details to MDM, then MDM creates a new record in the Bank Detail qualified lookup table. This is OK. But when sending exactly same bank details again to MDM, then MDM creates again a new record in the Bank Detail qualified lookup table. I would expect that it
first performs the Automap and only if it cannot find a value, it will add a new record!
Can you guys help me out from this?
Best Regards
Devaraj PK

Hi Devaraj,
Please check these configuration options of Import Manager
1. Default Qualified Update - The default setting for whether incoming source subrecords either are appended to, completely replace,or update the set of existing qualified links of a qualified lookup field when updating existing records.
2. Default Matching Qualifiers - The default setting for which qualifiers to use as matching qualifiers when matching existing qualified links when updating existing records.
Any operation on the qualified tables will depend on the above two options.
Reward if found useful
Regards,
Jitesh Talreja

Similar Messages

How to creat a new record in the Db table

Dear all,
I am trying to update a DB table and i want to create new records in this table every time the user changes something on the screen,
I want to append the DB table and not update it how should i go about this???
Regards,
Vijay.
PS:

Hi
User INSERT statement for the same...
Please read the help...
Cheers,
Hakim

How to create New columns for the Internal Table Dynamically?

HI Guys,
In my logic i have to create new columns depending on the logic which i am executing.
My requirement is .I have to display o/p like this
Material || Year || Period || Mix ratio || Vendor ||Mix Ratio || Vendor || Mix Ratio Vendor || Mix ratio || Vendor || Mix ratio.............................from table's CKMLMV003 and CKMLMV001.Her i have to display the o/p in the above format and i have to display Vendor and Mix Ratio for 5 columns irrespective of data .If i have more than 5 columns for any record then i have to create a New columns dynamically for Vendor and Mix ratio.If anybody want my code i can Submit But plz tell with example how to do?
The O/P must be finally shown in ALV Grid
Thanks,
Gopi

You must create the entire internal table dynamically, you can not add columns to a statically define internal table. Here is an example of creating a dynamic internal table.
Creation of internal table dynamically based on the Date Range entered
Regards,
Rich Heilman

Insert a new record in the database table in between the records.

i va a database table which ve 100 records. but i want to insert my new record as 50th record. how i want to proceed?
thanks ,
velu.

V,
This is an odd request. Why?
Ignoring that, you can ATTEMPT to insert into the 50th position IF:
1) The DB table has just had the primary key index re-built/re-shuffled to GUARANTEE that it IS in primary key order
2) And the primary key of the new record is built so that it follows the 49th record
Regardless, once this table has activity against it, its sort order can/will get out of promary key order (with adds/changes/deletes).
But when you select data from it, you can use ORDER BY or an ABAP SORT to organzie the date as needed.
Again... not sure WHY you need a record in a particular physical position... who cares... it is a relational DB.

How to insert new record in the database table using the Jdeveloper

Hi Masters
I am new Bee in j2EE developing side and i ahve oracle jdeveloper 9i version is 9.0.4
And now I wann to know that how can i create the web application that will enter the Data in the HTML FORM and save that data into the Table emp plz tell me step by step
thx in advance

the steps to follow -
download JDeveloper 10.1.2 from OTN (9.0.4 is very old and has some features that won't be in the next releases).
Then follow the ADF Workshop from the JDeveloper home page on OTN.
(If you have to use 9.0.4 then look for the archives of JDeveloper on OTN)
for example:
http://www.oracle.com/technology/products/jdev/viewlets/viewlet-archive0903.html

Insert New Records to the same table based on an existing record

How do I write a query to get the output shown in the OutputTable? Salary in OutputTable = TableA.Salary * TableB.SCode
I posted a similar question earlier but no solution, so, I've decided to use a different approach to get it done.
TableA
EmpId
FName
LName
EType
ECat
Salary
1
John
Doe
Perm
E
100
3
Jane
Jones
Perm
E
150
4
Mike
Moses
Cont
C
50
7
Eric
Holder
Cont
C
75
9
Pete
Pan
Perm
E
60
TableB
EmpId
ECat
SCode
1
L
2
2
L
5
3
L
5
4
L
10
5
L
7
OutputTable
EmpId
FName
LName
EType
ECat
Salary
1
John
Doe
Perm
E
100
3
Jane
Jones
Perm
E
150
4
Mike
Moses
Cont
C
50
7
Eric
Holder
Cont
C
75
9
Pete
Pan
Perm
E
60
1
John
Doe
Manual
E
200
3
Jane
Jones
Manual
C
750
4
Eric
Holder
Manual
C
500

The first line of your code; is the syntax correct?
INSERT TableA
yes
so far as table structure matches with the source you dont need a column list
Just use destination table name instead
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page

Ctx.SaveChanges() creates new records for related tables

Ok, this is my first stab at EF Code first, so forgive me if this sounds stupid.
I have a simple database and want to add a record in the main trans table. It has 2 foreign keys to 2 reference tables. I wire up the data entry screen in WPF (MVVM) and populate the entity. This entity has the correct references to existing records in the
reference tables.
However when I call save changes it adds the trans record, but also ADDS new records to the reference tables (producing duplicates). I do not want to add records to the reference tables, but rather use the existing records.
I'm sure it's a simple thing, but I am stuck. Any help would be appreciated...
Thanks,

Thank you for the response. I probably didn't phrase it clearly...
I have a simple Warehouse attendance app that will record when people are absent and the reason. I have 2 fixed reference tables. One is a list of employees, the other is a list of reasons (s - Sick, V - Vacation, etc...)
User enters a date, then selects a employee from a drop down and a reason from a drop down.
01/08/2015      Joe Smith     S - Sick
Both the employee object and reason object (in my record class) point to valid existing records from their reference tables.(i.e employee Joe smith has an Id of 57)
When I call ctx.SaveChanges();
it adds the record to the attendance file, but also adds a record to the employee and the reason table. I now have 2
Joe Smiths in the employee table as well as 2 S - Sick Reason codes.  Joe Smith was added again and now the employee object points to Joe Smith with an Id of 58.
Here is the record class:
public class Record
    public int Id { get; set; }
    public virtual Employee Employee { get; set; }
    public virtual Reason Reason { get; set; }
    public DateTime Date { get; set; }
    public string Notes { get; set; }
    public Record()
        Date = DateTime.Now;
    public string DayOfWeek
        get { return Date.DayOfWeek.ToString(); }

Not able to see data in the qualifier table of the main tbl , Data Manager

Hi,
I have an issue of not able to see the data of two qualified table after populating them.
It is in mdm-5.5 ps4.
When populating data first time ,it shows up in those two table slots in the right side of the Data Manager.
However subsequently it does not show up in those slots , only by right click on the table and selecting "View/edit", the window pops up where those data shows up.
However unlike other qualified tables the data does not showup automatically for these two tables.
Appreciate any suggestion or feedback on this.
regards,
-reo

You may have checked the Filter Check Box next to the Qualified Lookup cell in Data Manager, when the current table is the Main Table.
You use the Filter Checkbox to limit the qualified table records by the current search selections.
Secondly, you have see if there are any Qualified Links to the main table record you are viewing.
If not, create the Qualified links in Data manager, for the main table record and the Qualified Table Record.
Once this is done, you will see the Display fields of the Qualified table for which the links exists for the given main table record.
Message was edited by:
Adhappan Thiagarajan

Using combination of insert into and select to create a new record in the table

Hello:
I'm trying to write a stored procedure that receives a record locator parameter
and then uses this parameter to locate the record and then copy this record
into the table with a few columns changed.
I'll use a sample to clarify my question a bit further
-- Create New Amendment
function create_amendment(p_mipr_number in mipr.mipr_number%TYPE, p_new_amendment_number in mipr.amendment_number%TYPE)
return integer is
new_mipr_id integer;
begin
THIS is causing me grief See comments after this block of code
insert into mipr
(select mipr_id from mipr where mipr_number=p_mipr_number),
(select fsc from mipr where mipr_number=p_mipr_number),
45,
(select price from mipr where mipr_number=p_mipr_number),
practical,
(select part_number from mipr where mipr_number=p_mipr_number);
THe above will work if I say the following
insert into mipr
(select * from mipr where mipr_number=p_mipr_number);
BUt, Of course this isn't what I want to do... I want to duplicate a record and change about 3 or 4 fields .
How do I use a combination of more than one select and hard coded values to insert a new record into the table.
/** Ignore below this is fine... I just put a snippet of a function in here ** The above insert statement is what I need help with
select (mipr_id) into new_mipr_id from mipr where mipr_number=p_mipr_number + amendment_number=(select max(amendment_number) + 1);
return new_mipr_id;
end;
THANK YOU IN ADVANCE!
KT

function create_amendment(p_mipr_number in mipr.mipr_number%TYPE)
return integer is
new_mipr_id integer;
tmp_number number;
tmp_mipr_id integer;
begin
tmp_number :=(select max(amendment_number) from mipr where mipr_number=p_mipr_number);
Question:
tmp_number :=1; works..
tmp_number doesn't work with the select statement?
Obviously I'm a novice! I can't find anything in my book regarding tmp variables... What should I look under is tmp_number a
variable or what? In my Oracle book, variable means something different.
Thanks!
KT
I have the following code in my stored procedure:
Good luck,
Eric Kamradt

Creating new records while querying existing record

Hi,
I have one master - detail form.
First i created 1 record. Request ID is the primary key. Now request id generated. For ex.: 10
Request Id, date, requestor , location, status fields are in header block.
In lines block, i hv some other fields.. and one field called 'Activity'.
While creating first record, the activity will be 'New'.
Then i'll query the record '10'.
when i'm changing the activity 'New' into 'Upgrade', it should create new record with new request ID.
How to do this?
I hv written procedure that, i'm taking field values to local variables. Then assigning the local variable values to field values.
It is not creating as new record. It overwriting the existing record with new values. Existing record is missing.
Pl. give steps.
Thanks
Kavi

Hi,
Okk, you will have to do two things. Create two trigger on block level on which you want to do your changes.
1. First trigger. (PRE-UPDATE)
In pre-update trigger u will have to write the complete insert statement into the same table with new req id. like
DECLARE
vReqNo DATA_TYPE;
BEGIN
SELECT MAX(REQ_ID)
INTO vReqNo
FROM your_table;
INSERT INTO your_table
(req_no, fields....)
VALUES
(vReqNo, :forms_values);
END;
2. Create 2nd trigger on block level (ON-UPDATE)
write in this trigger
NULL;
for viewing the inserted record. What u have to do is in ON-UPDATE after null; create one timer NO_REAPEAT.
and in timer u will have to set the block property to req_id = generated_req_id_from_pre_update_trigger and
execute_query;
hope it will work...
-Ammad

URGENT Please - Create new records while uploading data

Hi Gurus
We are using BW 7.0 and data is loaded to a custom InfoCube using Transformations. PSA is used to store data intermediately.
We have a requirement that data records from source system will come for different value types. If source data records contain '20' as value type then we need to split-up this record into 2 new records. The new data records should have value types '25' and '30'. And we need to distribute the amount in original data record equally among the 2 newly created data records.
Can somebody please explain how can we do that?
I think, we might have to write some code in Start Routine of Update Rules to do this but I know very little ABAP. So your expert help would be appreciated.
Points guaranteed!
Regards
Adi

Hi Adi,
 In transformation End Routine you do this.
Sample Code:
Data : Ls_result_package like result_package.
Data : lt_result_package type standard table of ls_result_package.
Loop at result_package into ls_result_package.
 If ls_result_package-<Value Type> = '20' .
 ls_result_package-<value type> = 25.
 ls_result_package-<Key Figure_1> = ls_result_package-<Key Figure_1> / 2.
 ls_result_package-<Key Figure_2> = ls_result_package-<Key Figure_2> / 2.
 ls_result_package-<Key Figure_3> = ls_result_package-<Key Figure_3> / 2.
--> For First Record
 append ls_result_package to lt_result_package.
---> for secound record
 ls_result_package-<value type> = 30.
 append ls_result_package to lt_result_package.
 clear ls_result_package.
Endloop.
--> Clear Result_package table
Refresh result_package.
--> Push data from Lt_result_table to Result_Table.
Insert lines of table lt_result_table from 1 into result_table.
P.S: This is sample code only, check for systax errors....
Hope it Helps
Srini

How can I make the popup with empty fileds and create new record?

I would like to use a popup to create new record.
I created a af:popup by drag and drop a VO from data control to jsff. then, I created a button and place a af:showPopupBehavior. I was able to popup window by click the button.
however, the window filled with the information from the 1st record. and when I select a record in table and click popup, the popup is filled with that record.
How can I make the popup with empty fileds and create new record by saving the popup?
Thanks

You can have edit and new buttons, in the PopupFetchEvent identify button source (using popupFetchEvent.getLaunchSourceClientId()) if new button clicked clear the binding using below code.
If you want to see empty fields, in the popup PopupFetchEvent clear the input component bindings.
resetBindingValue("#{bindings.<componentid>.inputValue}", null);
 public static void resetBindingValue(String expression, Object newValue) {
 FacesContext ctx = FacesContext.getCurrentInstance();
 Application app = ctx.getApplication();
 ExpressionFactory elFactory = app.getExpressionFactory();
 ELContext elContext = ctx.getELContext();
 ValueExpression valueExp = elFactory.createValueExpression(elContext,expression,Object.class);
 Class bindClass = valueExp.getType(elContext);
 valueExp.setValue(elContext,newValue);
 }

How to clear the previous filter text when creating new record??

Dear All,
my question is i i created table having filter and sorting.
when i m searching data through filter text data is coming but i want to clear that text(filter text) when i am creating new record.
for my case when i am creating new record all blank field is coming but in that filter text box previous data is coming which one i was searching.
but i need when i will create a new record tat filter text should be clear.
Thanks
Damby

Damby, please tell us your jdev version.
Check my blog http://tompeez.wordpress.com/2011/10/29/jdev-how-to-reset-a-filter-on-an-aftable/ you can add this to the button you use to create the new record.
Timo

How to find out the user who has created a new field in the custom table.

How to find out the user details who has created a new field in the custom table.
Thanks,
Joan

Hi Jesudasan ,
You can know the user details with version management.Please find the
below procedure to know.
Go to table->Utilities tab->version->Version management->Compare the previous one .
Hope this solves the issue,Let me know if you have any issues.
Thanks,
Rajani

How to process each records in the derived table which i created using cte table using sql server

I want to process each row from the CTE table I created, how can I traverse from first row to second row and so on....
how to process each records in the derived table which i created using cte table using sql server

Ideally you would be doing a set based processing rather than traversing row by row as thats more efficient. To answer it specific to your scenario we may need more info. Can you explain with some sample data your exact requirement?
Please Mark This As Answer if it solved your issue
Please Mark This As Helpful if it helps to solve your issue
Visakh
My MSDN Page
My Personal Blog
My Facebook Page

Creates new record in the Qualifier Table while importing.

Similar Messages

Maybe you are looking for