Creating a backup before Leopard install

Is it possible to back up my entire 80gb imac startup drive to one of my firewire drives with assurance that I can go back to that system if my Leopard install goes haywire? My first attempt to install Leopard failed with some un-useful error message and I was concerned that I might have gotten too far to go back. It seems to have rebooted fine back to 10.4.10, but my other startup drive is 10.2.8 and I'd hate to have to startup from that

Make a bootable clone backup on the FW drive. I use LaCie Silverkeeper 1.1.4.
Most important! Test the bootable clone. Restart your computer with the Option key pressed and your external drive should appear as one of the bootable options. Select its icon and click on it. Only after you boot up and see that the clone is indeed a clone, do you really know that you are safe from any kind of installation problem.
I would also strongly suggest removing the external drive connectio from your computer before installing Leopard to be absolutely sure nothing can happen to it.

Similar Messages

Backup of Leopard Install DVD with disk utility

I'm in the process of saving a disk image from the Leopard Install DVD, but I'd like to be sure I did it right by selecting the Leopard Install partition on the sidebar in Disk Utility, rather than the drive itself. I did so because when I tried it with the drive itself it offered a default name as the name of my dvd drive "Matshita" rather than anything specific to the disk.
I'd also like to be sure the windows drivers are there, so before I waste an hour burning and tossing the result, the question is do I select the drive or the partition to image?

Run the disk utility and select the disk and then select New Image. You will create and image on your desktop.
I used cdr rather than dmg.
I also used Toast8 to burn the image to a DVD
Be sure you are using a dual-layer DVD and your burner supports it.
I successfully burned a backup this way, and yes, it does contain the Windows drivers as well as Leopard.

How can I restore my old history & bookmarks if I didn't run backup before re-installing a new clean OS? I've been using Firefox for 7 years as default, help me

Hello,
I believe that what I'm asking is simple & clear. Do you or do you not store user data backups on your servers? I've been using Firefox, as the default browser, for over 7 years. Naturally, I had to upgrade my
pc's & operating systems several times through this period. Every time I use a new device & of course a
new OS, I normally lose my old data (History & Bookmarks).
If you keep records or backups of old users' data, there will be no problem & I could restore all my old data
following your instructions. If not, which is probably the case, I'd like to suggest you consider developing or
at least put more stress on running backup before uninstalling & re-installing a new OS for the users to pay more attention to this issue.
That's all, thanks.
Regards,
Aly Hamed

hello aly, mozilla doesn't keep any of your history or bookmarks on its severs without your expressed consent (would be a horrible privacy policy otherwise) - there's the [[Use Sync to share your Firefox bookmarks, passwords and more with Firefox for mobile|firefox sync feature]] which will store parts of your private data encrypted in the cloud, in case you've used that in the past you'd need 3 components to restore this data: your username, password & the recovery key...
otherwise i don't know of any way to get to your old data if you haven't kept any other backup of some sorts - unfortunately most of us are reminded to the importance of backups when it's already too late :-/
in regard to your suggestion: during the firefox uninstall procedure your personal data isn't removed per default, so it would still be there after a reinstall of the application - you'd have to explicitly check the option to clear this kind of data in the uninstaller. some general information on where to look if you want to backup your firefox data in the future is available here: [[Back up and restore information in Firefox profiles]]

WARNING!!! Backup before installing Leopard

I've had 2 of my 3 Macs crash will installing Leopard corrupting the hard drive. I had to reformat both and lost all of the data.
During the install, I got an error message that Leopard was unable to complete the installation but I was unable to restart the computer. I worded with Apple tech support during the first failure which required reformatting the hard drive. The 2nd computer installed normally but the 3rd crashed also.
Word to the wise, back up everything before doing the Leopard install.
FYI: I LOVE Leopard

To Apple's credit, they do warn people to do a complete backup before installing Leopard as well as all OS updates. For what its worth, I installed Leopard on three Macs and all three worked fine.

Before Leopard 4 hard drives, after leopard install, now only shows 3 hds

I have a Mac Pro with four internal 400 GB SATA drives. Before I installed it I had four drives. Now after I have installed it, I only have three. Apple system profiler still shows four drives, but only three show on my desktop. They are all formatted Journaled HFS+.
What gives? Does anyone know how to get my missing drive back.

This just in from Gizmodo...
The bad news is, we have discovered a Leopard-related issue that may very well throw a monkey wrench into your Time Machine. Anyone trying to use Time Machine with a previously PC-formatted drive could be at risk. The good news is, there is an easy—albeit none-too-obvious—fix. Here's the dilly-o:
After I upgraded my MacBook Pro to OS X Leopard, the first thing I did was grab a brand-new Maxtor USB drive and format it to Mac OS Extended (Journaled) using Disk Utility, just like I had countless times before. As soon as I erased the disk, Time Machine popped up as promised, and asked if it could use the disk for backup. I said yes, and was on my merry way. Only I wasn't.
Time Machine ran for a bit, and then crapped out after about 10GB. I went into Disk Utility and saw that although the partition was formatted Mac OS Extended (Journaled), the volume itself still said FAT32. I clicked Erase to reformat the drive, and got the format failure error you see above.
I tried this with FAT-formatted drives from Seagate, Iomega and HP as well. Each time I saw the same thing. I could reformat the partition to Mac OS Extended (Journaled), and Time Machine would recognize it. Get Info would say that it was formatted correctly. But Disk Utility showed that the volume was formatted for PC. Inevitably, if the Time Machine backup was greater than 10GB, there were problems. Worst of all, if I dared try to format the volume for Mac, I would get the dreaded error, and the disk would be temporarily unmountable.
Not only did I vary drives, but I tested the problem on various systems too. I tried it booting from the Leopard DVD, with the same results. Ditto when I tried it using my wife's Leopard-upgraded MacBook Pro. (Yes, his n' hers MBPs. You can insert your "awwww" here.) The end result was that I couldn't break the FAT grip on these **** drives.
I made some calls, I talked to some people, and eventually here was the solution: you wipe the **** out of the drive by creating new and different partitions. So, do not head to the Erase tab in Disk Utility to prep a PC-formatted drive for Time Machine. Instead:
• Go to the Partition tab. Create two partitions. Under Options, select GUID Partition Table (what you would use to make a Mac OS boot disk) and click OK then Apply.
• Once your partitions are in place, do it again, reverting back to just one partition, but still keeping the GUID Partition Table option. Click OK and Apply again, and at this point you should be cool.
• To be safe, you can then go to Erase and set formatting for Mac OS Extended (Journaled), then format it once and for all. But when you get there, you will probably see that your volume is already formatted in the right way.
Using this method, I have gotten all of the disks to work just fine with Time Machine, and I don't anticipate any problems in the future.
OK, I know, quite a bit of nerdiness coming from one dude this late at night. But I wanted to get out there and tell you about the problem I encountered, in case you are having the same troubles, or plan on getting there sooner or later. Also, this solution is actually a workaround of sorts. My hope is that Apple can update Disk Utility with a stronger form of disk erasing that doesn't require so many manual steps, but if I am missing something obvious, I'd love to hear it. Please share any troubles you've had, or any better solutions you've cooked up.
Special thanks to Dorian and Ken!
I will try this and post back.

Restore Time Machine backup on fresh Leopard install without disc.

I just got my iMac back from the Apple Store where they fitted a new hard drive with a fresh installation of Leopard. I've got an external drive with a Time Machine backup of my old HD, but don't know how to restore it. Unfortunately I forgot to ask them about it at the store and now realise that I don't have the Leopard install DVD with me, only the Tiger ones that came with the iMac (which obviously don't have the time machine option).
Is there any way to restore my data without the disc? It seems odd that they would install leopard after asking me if I had a time machine backup if I would just have to install it again.
Any help would be greatly appreciated as I'd love to get my Mac back to normal without having to have my Leopard disc sent to me.

You can use Migration Assistant, or re-create your user accounts from scratch and then selectively retrieve just what you need from your backups.

Before I install snow leopard, I tried to move tiger into the external harddrive. My mac says it can't do because it is the OS X. So I installed snow leopard without removing tiger. After that, my computer often freezes. How can I remove tiger?

Before I install snow leopard, I tried to move tiger into the external harddrive. My mac says it can't do because it is the OS X. So I installed snow leopard without removing tiger. After that, my computer often freezes. How can I remove tiger? Or How can I prevent my mac from freezing?

McHagihara wrote:
Before I install snow leopard, I tried to move tiger into the external harddrive. My mac says it can't do because it is the OS X. So I installed snow leopard without removing tiger. After that, my computer often freezes. How can I remove tiger? Or How can I prevent my mac from freezing?
When you installed Snow Leopard, Tiger was replaced, leaving your programs and files intact.
What is causing your freezing problem is unknown, you can take Kappy's advice and remove everything, but you lose your files and free iLife programs that came with Tiger/new machine.
The 10.6.3 disk you "upgraded" with has the full 10.6.3 on it, but no free iLife suit, so a erase and install will remove what you already have installed.
You can try to locate your problem without the erase and install method by running through this list of fixes.
Step by Step to fix your Mac
But before you do anything, backup your personal data off the machine to a extenal drive and disconnect.
Most commonly used backup methods
Because if you have to follow Kappy's advice and wipe and install 10.6 fresh, it will cure your problem in nearly 99% of cases, but you have to rebuild everything. All programs and files.
How to erase and install Snow Leopard 10.6
If this is all too much for you, then STOP and call a local PC/Mac service or competant friend to assist you.
Yuo might need to install more RAM into the machine to make 10.6 run better as well.

Iphone4 would not restore Error -50. I have tried to restore and it restored it to the point that it created after 5.0 was installed. How can I get it an older restore point from my backups and restore it on another computer? The phone has been wiped out.

Iphone would not restore---- Error -50. I have tried to restore, and it restored it to the new point that it created after 5.0 was installed. How can I get it an older restore point from my backups and restore it on another computer? The phone has been wiped out. I can see earlier backups in my C:\Documents and Settings\user\Application Data\Apple Computer\MobileSync\Backup folder. There are four subfolders in this address. I need my contacts, photos, and messages back. I know this is a common error but I can not figure it out. I have ran the other troublshoot items in the error steps for 13 and 14 like apple says. Is there a way to call apple and get a step by step of how to restore from another restore point? Does anybody have a solution????

It tells you to go to Error 13 and 14 if you receive error (-50).
Here is what I have tried...
Error 13 and 14: These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting. I have moved it around to different ports.
Put a USB 2.0 hub between the device and the computer. Didn't change anything.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts. Removed all virus protection and firewall.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.Used the Microsoft fix it.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online. Doesn't matter.
Try to restore from another known-good computer and network. I do not know how to do this or how to find the correct/full/complete restore point. There should be more information for this.

Can I restore a time machine osx lion backup using snow leopard install DVD?

Hi.
I've been using osx lion but my hard drive died. Fortunately I have been making time machine backups. Since I downloaded lion from the app store I only have the snow leopard install disks.
I know there is an option to restore from a time machine backup using the snow leopard disk, but since the time machine backup is of a later operating system (lion) will that time machine restore work?
If it won't, can you recommend how to restore from my time machine backup?
Thanks.

Once the replacement hard drive is installed, boot from your original Snow Leopard Installation Disk. From there format the harddrive and install Snow Leopard and then download and install its Updates. Next, navigate to the Mac App Store and login using the Exact same Apple User ID that you did the first time you downloaded Lion. You will now be able to download and install the Lion OS for Free. Download and install the Lion Updates. Lastly, using Migration Assistant, migrate your Apps and Data from the Time Machine external hard drive to your internal Lion harddrive. This method should give you a very stable version of Lion on your internal harddrive complete with all your previous settings, Apps and Data.
Hope this helps

Is it necessary to do a backup before installing the new ios7 and then do a restore? We have 4th

I am not sure if I need to do a backup before installing the new upgrade of iOS7 and then do restore all files. I have heard of someone losing all their contacts! Any ideas please?

I would back up anything you don't want to lose. Chances are, you wont' lose a thing.....but backups are always nice to have.

Partition with Leopard Install Disc before install on drive?

I have been trying to install Leopard but I want to partition my drive before I install so I can do a clean install and not mess up my current OS and apps.
I have been booting from the install disc and going to disc utilities to partition... it goes through the motions and tells me that is has failed... can't partition?
Shouldn't I be able to partition this way with the new disc utility? Or do I have to install leopard on a drive and partition from there (I have an external drive I may try to install on and then partition my MacBook from there?)?

Nomad, most programs require you to erase your drive when you re-partition it. I did hear about live partitioning in Leopard but I haven't read about it yet so I don't know what to tell you. There is a program that allows you to live partition. Check out this site. http://www.coriolis-systems.com/products.php. you will have to defrag the drive first.

Installed GoFlex 1.5 TB external drive on my iMac running OS X 10.7.4 and error says Time Machine can't create a backup folder. Any solutions?

Installed GoFlex 1.5 TB external drive on my iMac running OS X 10.7.4 and error says Time Machine can't create a backup folder. Any solutions?

Well, to unmount the drive, you can use the Terminal application.
Start in Applications > Utilities > Terminal.
When the Terminal window opens, type - without the quotes and with the space at the end - this:
"diskutil unmount "
Then drag the icon of the unmounted drive from the desktop into the Terminal window - the drive location will be added to the end of the command above. It should look something like this:
diskutil unmount /Volumes/volumename
Then press enter (return).
That should unmount the drive. Now you can try the Time Machine process again with perhaps a different interconnect cable for the GoFlex.

Do you have to create SPN before you install Sharepoint 2013 Server?

Hello Community
    After installing WS2012 and Sharepoint 2013 Server on it, I
created SPN's for the SQL Server and domain user.
    While creating the web application I ran across some information
that says if you use Kerberos Authentication you have to setup the SPN's
in AD DS before you install Sharepoint 2013 Server.
    That doesn't make sense to me because it might be possible that
SPN's may be needed to be created throughout the lifetime of the
Sharepoint farm which could be forever.
    So the question is, is it true that you can only use Kerberos
Authentication if you created the SPN's in AD DS first?
    Thank you
    Shabeaut

You can create it after-the-fact, you just may have access issues until it is created and the user account running the pool is logged off and back on again. Right, it has nothing to do with the installation status of SharePoint.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Can I wipe my hardrive before upgrading my Macbook to OS X 10.6 by using the Snow Leopard install CD?

Can I wipe my hardrive before upgrading my Macbook to OS X 10.6 by using the Snow Leopard install CD? Or do I need I need to wipe my computer from the OS X 10.5 CD that came with the laptop?
In other words. If I purchase the Snow Leopard Software for $29, can I wipe my hard drive first before installing it? Or do I need to wipe my hard drive, reinstall OS X 10.5, and then continue to upgrade to Snow Leopard?

If you want to wipe the drive in Leopard, do it from the install disk. Otherwise do it from you Snow Leopard install disc.

Strange behaviors on MacBook Pro before & after installing Snow Leopard

I am not sure if this is even a Snow Leopard issue. We have a MacBook Pro that up until recently had been running Tiger. A problem developed whereby we could not access the iTunes store. A message that the store was "not available at this time" came up repeatedly while at the same time another computer was able to make connections with it. In addition, when Firefox was opened, a prompt appeared to drag the Firefox icon to the applications folder. Even after this was done, the same prompt would appear during subsequent sessions.
We updated the OS to Snow Leopard, and the iTunes store problem was resolved. However, there are some other unusual things going on with other applications.
1. When Photobooth is opened, we get this message: "There is no connected camera."
2. When we open any of the Office applications, we are greeted with: "To open Microsoft Word (or Excel, PowerPoint, etc.), you need to install Rosetta."
3. The above-described issue with Firefox still occurs frequently. Even though Firefox is located in the Applications folder, there is now a volume named Firefox on the desktop. We can't get rid of it.
We don't know for sure if the Photobooth and Office issues were present right before the Snow Leopard installation, but they had worked properly in the past.
One thing we did do is a verify and repair of permissions. There were MANY that needed to be repaired.
In addition, right around the time SL was installed, the computer was frequently shutting off without warning. The mouse was also operating erratically. It was found that the battery needed to be replaced, as the existing one was expanding and was actually disrupting the operation of the mouse pad. Could this battery have been the source of these problems?
What are the next steps we should take?

I suppose your expanding battery problem could have caused some or all of these problems, but most of them sound like software issues.
If I were you I'd try a few things:
1. boot from your snow leopard install disk and repair your startup disk with disk utility.
2. repeat the repairs until no repairs are reported (the toilet paper principle).
3. repair permissions again.
4. if the problems persist, trash the preferences files for the misbehaving apps.
5. if the problems persist, delete the misbehaving apps and reinstall them.
6. it the shutoffs persist, try a PMU reset.
7. a PRAM reset would probably be a good idea too.
8. if none of that works, archive and reinstall.
there is a freeware utility called applejack that will also do most of this.
Details on all of these will be readily available with a google search.

Creating a backup before Leopard install

Similar Messages

Maybe you are looking for