Creating a new document using XQuery

Hello everyone,
I wondered if there was a way to create a new document using XQuery. What I am trying to do is to run a query on XML file and try to print the results in HTML for viewing purpose.
The HTML is spitted out on DOS prompt. Instead I wanted to write that HTML to a file on disk. Is this possible with the XQuery tools provided by Oracle?
Thanks in advance for all the help
K

Folks,
Kinda answering to my question. Just send the DOS output to some file. Pretty Simple huh!
Thankyou anyways
K

Similar Messages

How can I create accurate decimal dimensions when creating a new document or using the art board in Illustrator CS6? When I type in a number with a decimal, it automatically rounds the number up.

How can I create accurate decimal dimensions when creating a new document or using the art board in Illustrator CS6? When I type in a number with a decimal, it automatically rounds the number up.

For my part you are welcome, sdowers.
Unfortunately, the uncertainty arising from the rounding has been up several times here in this forum.
I just came to remember a warning that needs to be given:
The rounding of the representation of a numerical value may be harmless in itself, but if you use it for any operation that changes the value, such as multiplication or whatever, things will go wrong because the operation will be made on the basis of the rounded value instead of the true value. So, as in your first case in post #2, 39.625 rounded to 39.63 will become 79.26 instead of 79.25.

Problems in creating and storing new documents using BAPI_DOCUMENT_CREATE2

Hi experts,
I'm getting problems in creating and storing new documents using BAPI_DOCUMENT_CREATE2.
I have a scenario where is defined the document type ZC1, document part 200, authorization group 0002 and for all of these documents the storage category "Cofre DMS1". And the status which demands the storage category is 'FR'.
I've been fullfiling the BAPI_DOCUMENT_CREATE2 in this way:
"Tables
data: it_doc like bapi_doc_draw2,
      it_return like bapiret2,
      it_files like bapi_doc_files2 occurs 0 with header line,
      it_objs like bapi_doc_drad occurs 0 with header line.
"Variables
data: wl_doctype like bapi_doc_draw2-documenttype,
      wl_docnumber like bapi_doc_draw2-documentnumber,
      wl_docpart like bapi_doc_draw2-documentpart,
      wl_docversion like bapi_doc_draw2-documentversion.
it_doc-documenttype = 'ZC1'.
it_doc-documentpart = '200'.
it_doc-documentversion = '00'.
it_doc-description = 'Test of documents creation via BAPI'.
it_doc-username = sy-uname.
it_doc-statusextern = 'FR'.
it_doc-authoritygroup = '0002'.
refresh it_files[].
clear it_files.
it_files-originaltype = '1'.
it_files-storagecategory = 'Cofre DMS1'.
it_files-wsapplication = 'PDF'.
it_files-docfile = 'c:\110307.pdf'.
it_files-description = 'Test file'.
append it_files.
refresh it_objs[].
clear it_objs.
it_objs-objecttype = 'EKPO'.
it_objs-objectkey = '47000497600010'.
append it_objs.
CALL FUNCTION 'BAPI_DOCUMENT_CREATE2'
EXPORTING
    documentdata = it_doc
IMPORTING
    documenttype = wl_doctype
    documentnumber = wl_docnumber
    documentpart = wl_docpart
    documentversion = wl_docversion
    return = it_return
TABLES
    objectlinks = it_objs
    documentfiles = it_files.
After execute the BAPI process I got the following error:
E26 087 - Data carrier COFRE DMS1 not defined
Does anybody have a sugestion to help me, please?
Thks
David
Edited by: David Tsutsui on Mar 18, 2010 10:52 AM

Please refer to this thread, it tells why you need a data carrier you can also configure the same in DC20.
Data Carriers for Storage the Originals of DMS

I'm using CS6 created a new document. trying to use my layers and my work keeps going black. when I

I'm using Photoshop CS6, created a new document. trying to use my layers and my work keeps going black. when I click on the workspace i am able to see my work but when I move my mouse any little bit it goes black again.

Good day!
Does turning off »Use Graphics Processor« in the Performance Preferences and restarting Photoshop have any bearing on the issue?
Regards,
Pfaffenbichler

I am trying to use the liquify tool for the first time. I created a new document (RGB/8) and before I place my photo, the liquify option is available. After I place the photo, the liquify option disappears. What am I doing wrong?

I am trying to use the liquify tool for the first time. I created a new document (RGB/8). Before I place my photo, the liquify option is available. After I place the photo, the liquify option disappears. What am I doing wrong?

What am I doing wrong?
For one thing you forgot to mention the version of Photoshop you use.
Did you place the image as a Smart Object? Liquify got Smart-capabilities with Photoshop CC.

Creating a new document in Finder with right-click--How?

Is there a way to create a new document in a Finder folder by right-clicking (or Ctrl-left)? So that the new file will be created at that very spot, in that very folder.
In Windows-Explorer this was quick and easy. Just right-click and you could choose from a menu to create a new empty doc of the most popular (installed) programs. Text file was mandatory. The file was created where the curser was at. VERY handy as that way you didn't have to open the application, create a new doc and then when saving having to crawl your way all the way to the position in the Explorer/ Finder.
Since I started with Apple and Tiger I've been missing this feature and Snow Leopard still does not seem to have it. Or did I miss something? I checked all the menue as well. There's not even a "Create new document". Only a "Create new folder".
I was just reminded of this when I wanted to create a new file on an external drive on a server to save some text in it. There was no way other than first opening Textedit, saving the empty file on the local Mac, THEN transferring the empty file to the server. Only THEN I could open it and edit it.
There MUST be a quicker way.
Also, in Windows you could edit this list in the menu (and add programs that would not by themselves do this). Is there a way for the Mac?
Cheers,
Jay

I might have just found a solution myself:
https://discussions.apple.com/message/10432377?messageID=10432377&amp%3b#1043237 7
It seems other people are wondering too.
And for those of you who don't understand why this is useful: Try it.
Open Textedit, Apple-N, and then save the darned file somewhere deep in the labyrinth of the Finder where you've just been but withouth the file. It takes AGES.
I, on the other hand -- at least in Windows --, right-click, new, double-click AAAND I'm on editing the file.
VERY quick.
It's beyond me why this is not possible on a Mac.

How to create a new document type for PO and Requisition

Hi All
Can you please help me with the steps of creating a new document type for PO and PR. Also the steps that need to be update for the procure pay cycle to work properly.
Once the document type is been created. I want to create the PO referecing the new PR and PO document type.I am new in MM.
Thanks, Ros

Hi,
1. You can create new PR and PO docu types at the following path:
For PR docu type:
First you need to create number range for docu type or you can use existing number range also. The path for creation of no. range is
SPRO>Materials Management->Purchasing->Purchase Requisition->Define Number Ranges
Then create PR docu type at below path and assign no. range to PR docu type here only
SPRO>Materials Management->Purchasing->Purchase Requisition->Define Document Types
For PO docu type:
Follow same procedure as mentioned for PR docu type. Path is
SPRO>Materials Management->Purchasing->Purchase Order->Define Number Ranges
SPRO>Materials Management>Purchasing->Purchase Order->Define Document Types
If you want to create PO referencing new PR docu type, link the PR docu type to PO docu type at below path:
SPRO>Materials Management->Purchasing->Purchase Requisition->Define Document Types--> Link purchase requisition - document type
Regards
Chetan

Create a new document in Sharepoint Document Library/OneDrive on iPad/Safari

Hi,
My users are having trouble creating a new document from OneDrive in Safari on their iPads. The screen goes grey like its going to show the popup to select the new file type, but the popup never comes up. If they clear their cache, it works for exactly 1
time and then goes back to this behavior. I'm not exactly sure if it worked before and/or when it stopped working. The iPad I have tested was at the latest 8.2 version of IOS and my Sharepoint farm is an On-Prem install of 2013 with SP1 mark2. My WAC farm
is also 2013 SP1.
Any suggestions?
Thanks,
Matt

Hi,
I understand you are suffering the issue when create a document in Sharepoint Document Library/OneDrive on iPad.
According to the official article
https://technet.microsoft.com/en-us/library/fp161353.aspx?f=255&MSPPError=-2147217396, the version of your iOS should be in the supported list. I guess the issue may start after you installed an update, and if there is any other version (low versions)
of iPads in your company, please use a different version device to test the issue.
Meanwhile, to determine whether the issue is related to your SharePoint environment, I suggest you just to register an Office 365 trail account, and test the issue with SharePoint Online. In case the same issue happens with SharePoint Online, the issue should
be related to your client device, and my next suggestion is to contact support of your device manufacture.
Once you need any help from SharePoint end, please don’t hesitate to come back, and we are always happy to support you.
Best Regards,
Lisa Chen
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Ilustrator freezes creating a new document with web profile.

Hi,
I have the illustrator instalation from creative cloud subscription and everytime i create a new document and on the profile combo choose "web", the illustrator freezes forever.
Im using mac version in a macbook pro 13" corei7 with 8gigs ram.

I'm having the same issue with i7 2500k, SSD, 16gb ram, 6870 2gb vram 10.7.4.
Anyone have any idea if i can get a crash report to help you guys out with figuring this?
Basically whenever i go -> new and change the document profile to web (or a few others) it just LOCKS and needs to be force quitted.
I've also just ran with the default and it locks up anyway.

Help with creating a new document

Hi,
I will have to work on creating a new document from scratch which will serve as a billing statement to a customer.
I have to construct it and I am really confused on how to structure my forms and subforms.
Can any of you please point me to a right place where I can get a good design guidelines?? Or is there anything like a good design for this.
Will the form structuring impact performance. This document can run really long based on the number of transactions.
I am using castor and object to xml mapping and using the data file to dynamically load the data on to pdf.
Since I am going to start this fresh, I want to get the structure and design correct.
Appreciate your time and help.
Thanks

A document was produced for Designer 7.1 and the principles still apply.
http://partners.adobe.com/public/developer/en/pdf/lc_designer_perf_guidelines.pdf
You can poke around here as well....
http://help.adobe.com/en_US/livecycle/9.0/designerHelp/index.htm
Steve

HT4942 After Creating a new document or editing an old document in Pages on my iPad I no longer see the changes in Pages on my iPhone. iCloud services are on with both devices.

After Creating a new document or editing an old document in Pages on my iPad I no longer see the changes in Pages on my iPhone. iCloud services are on with both devices.

Just thought I'd add my solution, I decided to go with WebDAV and I think it actually works better than the iTunes way, the steps are pretty much the same but avoiding the iTunes interface just makes things easier and faster.
I followed this guide but it does have a small mistake in the httpd-dav.conf file, on line 2, where it's WebServer/WebDAV">, it should be <Directory "/Library/WebServer/WebDAV">.
The tricky part is setting permissions which if wrong will give you errors when connecting with the iPad, I opted to set all to Read&Write since my home network has a hardware firewall. Another convenience was to add an alias to the webdav share on the Desktop.
I'm still expecting the call from Apple but even if they fix the iTunes I'm sticking with WebDAV, atleast until I see what's new with iOS5 and iCloud this fall which should bring true sync for documents (I'm hoping that they will offer encryption with my own keys, if not, then I'll probably keep using WebDAV).

Creating a new document with separate images

Can someone help me create a new document that has two separate images. I can create a new document but don't know how to place two separate photos in the document. For instance create a document that is 8.5 x11 with two images each 8.5 x 5.5.

there is a number of ways to do this. also reading the manual to get a basic understanding of how Photoshop works will do wonders. Another method of learning is lynda.com
here is one way.
1 make a doc that is 8.5 x 11 at whatever resolution you need.
2 use a guide as a center point.
3 open the two pics you want to use.
4 make sure they are the same res as your 8.5 x 11
5 drag the layers from the open pics to the 8.5 x 11
6 crop and size the pics in the file so they fit in each half

How to create a new document with a given theme, instead of choosing it every time.

Hi,
for work I only use a custom made keynote theme.
I've already deleted all the default themes, and the only one that is listed in the app is the one I actually use.
However every time I create a new document I have to chose its theme (that's normal having plenty of themes, but in my case is just a waste of time).
I was wondering if there's a way to tell keynote to start a new document with a given theme, in order to avoid to chose it every time.
Thank you for reading and for the help you will give.
Giacomo

Keynote > Preferences > General tab
select “Use theme,” and then click Choose to select a theme.

How do I create a new document that is 8" X 8" and with Print as the document profile?

Page 47 in Chris Botello's Adobe Illustrator CS6 of Cengage's Illustrated Series asks this for the Independent Challenge for Unit B. "Create a new document that is 8" X 8" and with Print as the document profile." As long as its CMYK it's "Print". Right? If I go and change the size the profile goes custom. I'm a Graphic Design Student at a local university. If there are others who have used this book, Please giver me a holler. I wonder what they want there? You think they want to change the "Print" profile? That hasn't been covered. I'm on CC not CS6 but haven't found differences in that area. Probably just not written very clearly.
Thanks,
Gary

Thanks Monika,
I hate it when I fixate on what should be easy. It's probably just a poorly worded task. I don't think it will blow my GPA.
Gary

How do I create a new document in Photoshop CC and have it 300 dpi?

How do I create a new document in Photoshop CC and have it 300 dpi? I am doing digital scrapbooking and need to have my layout in Photoshop 12 x 12 so it is a scrapbook page and 300 dpi and I hope this doesn't sound stupid but I don't even know what dpi means.
Thank you

File>New
Set preset to print or US Paper
(typing width and height values will change the preset to custom)
Set width to 12 inches
set height to 12 inches
set ppi to 300 (should already be this if you used the print preset)
Click OK

Creating a new document using XQuery

Similar Messages

Maybe you are looking for