How do I create a new document that is 8" X 8" and with Print as the document profile?

Page 47 in Chris Botello's Adobe Illustrator CS6 of Cengage's Illustrated Series asks this for the Independent Challenge for Unit B. "Create a new document that is 8" X 8" and with Print as the document profile." As long as its CMYK it's "Print". Right? If I go and change the size the profile goes custom. I'm a Graphic Design Student at a local university. If there are others who have used this book, Please giver me a holler. I wonder what they want there? You think they want to change the "Print" profile? That hasn't been covered. I'm on CC not CS6 but haven't found differences in that area. Probably just not written very clearly.
Thanks,
Gary

Thanks Monika,
I hate it when I fixate on what should be easy. It's probably just a poorly worded task. I don't think it will blow my GPA.
Gary

Similar Messages

How do I create a new Style that can be applied to an object?

Under the Assets menu there is a tab called “Styles”. My question is how do I create a new Style that I can apply to an object??? A link to a tutorial or something like that would be useful because I can’t find anything!!! Thanks in advance for helping me eliminate this frustration!!!

KomputerMan.com wrote:
What I want to do is create a library of styles that are basically pictures of various wood types.
There are a couple of approaches you could try.
Clipping paths
1. Draw the part shape as a closed path.
2. Position the image of woodgrain above or below the shape where you want it positioned.
3. Cut
4. Select the closed path.
5. Paste Inside.
See: Using FreeHand MX > Contents > Working with Objects > Working with clipping paths
Tiled fills
1. Use autotrace to trace the image of the woodgrain, using plenty of colors.
Using FreeHand MX > Contents > Using Imported Artwork > Tracing bitmaps > Tracing an image
2. Group the traced paths (but not the image) and create a tiled fill,
Using FreeHand MX > Contents > Using Strokes and Fills > Applying attributes to fills > Using tiled fill attributes
3. Make a style from a tile-filled object
4. Apply the style to other objects.
Judy Arndt

How do I create a 1d array that takes a single calculation and insert the result into the first row and then the next calculation the next time the loop passes that point and puts the results in thsecond row and so on until the loop is exited.

The attached file is work inprogress, with some dummy data sp that I can test it out without having to connect to equipment.
The second tab is the one that I am having the problem with. the output array from the replace element appears to be starting at the index position of 1 rather than 0 but that is ok it is still show that the new data is placed in incrementing element locations. However the main array that I am trying to build that is suppose to take each new calculation and place it in the next index(row) does not ap
pear to be working or at least I am not getting any indication on the inidcator.
Basically what I am attempting to do is is gather some pulses from adevice for a minute, place the results for a calculation, so that it displays then do the same again the next minute, but put these result in the next row and so on until the specifiied time has expired and the loop exits. I need to have all results displayed and keep building the array(display until, the end of the test)Eventually I will have to include a min max section that displays the min and max values calculated, but that should be easy with the min max function.Actually I thought this should have been easy but, I gues I can not see the forest through the trees. Can any one help to slear this up for me.
Attachments:
regulation_tester_7_loops.vi ‏244 KB

I didn't really have time to dig in and understand your program in depth,
but I have a few tips for you that might things a bit easier:
- You use local variables excessively which really complicates things. Try
not to use them and it will make your life easier.
- If you flowchart the design (very similar to a dataflow diagram, keep in
mind!) you want to gather data, calculate a value from that data, store the
calculation in an array, and loop while the time is in a certain range. So
theres really not much need for a sequence as long as you get rid of the
local variables (sequences also complicate things)
- You loop again if timepassed+1 is still less than some constant. Rather
than messing with locals it seems so much easier to use a shiftregister (if
absolutely necessary) or in this case base it upon the number of iterations
of the loop. In this case it looks like "time passed" is the same thing as
the number of loop iterations, but I didn't check closely. There's an i
terminal in your whileloop to read for the number of iterations.
- After having simplified your design by eliminating unnecessary sequence
and local variables, you should be able to draw out the labview diagram.
Don't try to use the "insert into array" vis since theres no need. Each
iteration of your loop calculates a number which goes into the next position
of the array right? Pass your result outside the loop, and enable indexing
on the terminal so Labview automatically generates the array for you. If
your calculation is a function of previous data, then use a shift register
to keep previous values around.
I wish you luck. Post again if you have any questions. Without a more
detailed understanding of your task at hand it's kind of hard to post actual
code suggestions for you.
-joey
"nelsons" wrote in message
news:[email protected]...
> how do I create a 1d array that takes a single calculation and insert
> the result into the first row and then the next calculation the next
> time the loop passes that point and puts the results in thsecond row
> and so on until the loop is exited.
>
> The attached file is work inprogress, with some dummy data sp that I
> can test it out without having to connect to equipment.
> The second tab is the one that I am having the problem with. the
> output array from the replace element appears to be starting at the
> index position of 1 rather than 0 but that is ok it is still show that
> the new data is placed in incrementing element locations. However the
> main array that I am trying to build that is suppose to take each new
> calculation and place it in the next index(row) does not appear to be
> working or at least I am not getting any indication on the inidcator.
>
> Basically what I am attempting to do is is gather some pulses from
> adevice for a minute, place the results for a calculation, so that it
> displays then do the same again the next minute, but put these result
> in the next row and so on until the specifiied time has expired and
> the loop exits. I need to have all results displayed and keep building
> the array(display until, the end of the test)Eventually I will have to
> include a min max section that displays the min and max values
> calculated, but that should be easy with the min max function.Actually
> I thought this should have been easy but, I gues I can not see the
> forest through the trees. Can any one help to slear this up for me.

Is it possible to tell me how i can make program in labview that take pixels of black and withe image and give coordinate of black or white pixels back to me.

hello everybody
is it possible to tell me how i can make program in labview that take pixels of black and withe image and give coordinate of black or white pixels back to me.
Solved!
Go to Solution.

Here's a slightly simpler version.
(Depending how you want to process the output, you might not need to traspose and/or reverse. Boolean to 0,1 works directly on the 2D array if needed )
amkamyab wrote:
it is good. i could enter 1bit image in and show it in array. now i want to take pixels coordinates. i meen i want to have (x,y) of each pixel to send it pixel coordinate to another program i wrote for steppers motor.
Can you be a bit more specific on how the output is supposed to look like? Initially you wrote "black or white", and since all pixels are either black or white, do you want to send all pixels? In what format? In what order? Please clarify?
LabVIEW Champion . Do more with less code and in less time .
Attachments:
BW-Pix.png ‏8 KB

How can I create a new slide that starts where a complex animation on the previous slide ends?

I am creating a series of animations to illustrate a complex set of ideas, and I want to do it as a series of animations, to keep each slide from getting too complex. I would like to do this a stages, by creating a new slide that is a copy of where the previous slide ended. I'm hoping that some of you have done more with Keynote animations than I, and that you'll be able to give me a few suggestions. Thanks!!

Thanks, Gary. I should have mentioned that the previous slide moved and scaled several groups of objects. So, at the end of the slide's activity the groups of objects were in different positions and were of different sizes than they are when I return to the slide. So if I copy the opbject sn paste them onto the next slide, I still need to get them to the right place, and scale them. That's tricky, especially since text objects don't scale like graphic objects. Thanks for trying tohelp, though. I apprecaite your effort!

I have an iPad and and iPhone. They share an iCloud and I want separate iCloud accounts. How do I create a new account without losing any information? I want to keep the original account on one device.

I have an iPad and an iPhone that share an iCloud account. I didn't realize when I got my iPad last year that when I signed up the iCloud on the device that it would share and use 5g of iCloud between the both of them. How do I unsync them and have two separate iCloud accounts? I don't care about sharing between them. When my kids put games on my iPad, I don't want them going on my phone. How do I create a new iCloud without losing any info on the other device?

Hi sugaliko,
You may need to set up your BlueTooth connection to the keyboard again. Use the steps in this article for guidance -
iOS: Third-party Bluetooth accessories
http://support.apple.com/kb/HT1664
Thanks for using Apple Support Communities.
Best,
Brett L

How can I create a new layer that is a gradient?

Hi, i'm very new to photoshop scripting and am having some trouble.
I'm looking for a way to take an image i have and set it to have a gradient opacity as it approaches the middle, my thought on how to do that was to just create a layer that is a gradient from top left to bottom right and then attach that as a vector mask.
Any ideas on how I could create this gradient layer in script, or a better method of doing this opacity gradient?
Thanks in advance,
Levianth

You could try this:
// 2012, use it at your own risk;
#target photoshop
if (app.documents.length > 0) {
var myDocument = app.activeDocument;
var theLayer = myDocument.activeLayer;
if (theLayer.isBackgroundLayer == true) {theLayer.isBackgroundLayer = false};
// create gradient layer;
// =======================================================
var idMk = charIDToTypeID( "Mk " );
    var desc15 = new ActionDescriptor();
    var idnull = charIDToTypeID( "null" );
        var ref3 = new ActionReference();
        var idcontentLayer = stringIDToTypeID( "contentLayer" );
        ref3.putClass( idcontentLayer );
    desc15.putReference( idnull, ref3 );
    var idUsng = charIDToTypeID( "Usng" );
        var desc16 = new ActionDescriptor();
        var idType = charIDToTypeID( "Type" );
            var desc17 = new ActionDescriptor();
            var idType = charIDToTypeID( "Type" );
            var idGrdT = charIDToTypeID( "GrdT" );
            var idLnr = charIDToTypeID( "Lnr " );
            desc17.putEnumerated( idType, idGrdT, idLnr );
            var idGrad = charIDToTypeID( "Grad" );
                var desc18 = new ActionDescriptor();
                var idNm = charIDToTypeID( "Nm " );
                desc18.putString( idNm, "Custom" );
                var idGrdF = charIDToTypeID( "GrdF" );
                var idGrdF = charIDToTypeID( "GrdF" );
                var idCstS = charIDToTypeID( "CstS" );
                desc18.putEnumerated( idGrdF, idGrdF, idCstS );
                var idIntr = charIDToTypeID( "Intr" );
                desc18.putDouble( idIntr, 4096.000000 );
                var idClrs = charIDToTypeID( "Clrs" );
                    var list3 = new ActionList();
                        var desc19 = new ActionDescriptor();
                        var idClr = charIDToTypeID( "Clr " );
                            var desc20 = new ActionDescriptor();
                            var idRd = charIDToTypeID( "Rd " );
                            desc20.putDouble( idRd, 0.000000 );
                            var idGrn = charIDToTypeID( "Grn " );
                            desc20.putDouble( idGrn, 0.000000 );
                            var idBl = charIDToTypeID( "Bl " );
                            desc20.putDouble( idBl, 0.000000 );
                        var idRGBC = charIDToTypeID( "RGBC" );
                        desc19.putObject( idClr, idRGBC, desc20 );
                        var idType = charIDToTypeID( "Type" );
                        var idClry = charIDToTypeID( "Clry" );
                        var idUsrS = charIDToTypeID( "UsrS" );
                        desc19.putEnumerated( idType, idClry, idUsrS );
                        var idLctn = charIDToTypeID( "Lctn" );
                        desc19.putInteger( idLctn, 0 );
                        var idMdpn = charIDToTypeID( "Mdpn" );
                        desc19.putInteger( idMdpn, 50 );
                    var idClrt = charIDToTypeID( "Clrt" );
                    list3.putObject( idClrt, desc19 );
                        var desc21 = new ActionDescriptor();
                        var idClr = charIDToTypeID( "Clr " );
                            var desc22 = new ActionDescriptor();
                            var idRd = charIDToTypeID( "Rd " );
                            desc22.putDouble( idRd, 0.000000 );
                            var idGrn = charIDToTypeID( "Grn " );
                            desc22.putDouble( idGrn, 0.000000 );
                            var idBl = charIDToTypeID( "Bl " );
                            desc22.putDouble( idBl, 0.000000 );
                        var idRGBC = charIDToTypeID( "RGBC" );
                        desc21.putObject( idClr, idRGBC, desc22 );
                        var idType = charIDToTypeID( "Type" );
                        var idClry = charIDToTypeID( "Clry" );
                        var idUsrS = charIDToTypeID( "UsrS" );
                        desc21.putEnumerated( idType, idClry, idUsrS );
                        var idLctn = charIDToTypeID( "Lctn" );
                        desc21.putInteger( idLctn, 4096 );
                        var idMdpn = charIDToTypeID( "Mdpn" );
                        desc21.putInteger( idMdpn, 50 );
                    var idClrt = charIDToTypeID( "Clrt" );
                    list3.putObject( idClrt, desc21 );
                desc18.putList( idClrs, list3 );
                var idTrns = charIDToTypeID( "Trns" );
                    var list4 = new ActionList();
                        var desc23 = new ActionDescriptor();
                        var idOpct = charIDToTypeID( "Opct" );
                        var idPrc = charIDToTypeID( "#Prc" );
                        desc23.putUnitDouble( idOpct, idPrc, 0.000000 );
                        var idLctn = charIDToTypeID( "Lctn" );
                        desc23.putInteger( idLctn, 0 );
                        var idMdpn = charIDToTypeID( "Mdpn" );
                        desc23.putInteger( idMdpn, 50 );
                    var idTrnS = charIDToTypeID( "TrnS" );
                    list4.putObject( idTrnS, desc23 );
                        var desc24 = new ActionDescriptor();
                        var idOpct = charIDToTypeID( "Opct" );
                        var idPrc = charIDToTypeID( "#Prc" );
                        desc24.putUnitDouble( idOpct, idPrc, 100.000000 );
                        var idLctn = charIDToTypeID( "Lctn" );
                        desc24.putInteger( idLctn, 2048 );
                        var idMdpn = charIDToTypeID( "Mdpn" );
                        desc24.putInteger( idMdpn, 50 );
                    var idTrnS = charIDToTypeID( "TrnS" );
                    list4.putObject( idTrnS, desc24 );
                        var desc25 = new ActionDescriptor();
                        var idOpct = charIDToTypeID( "Opct" );
                        var idPrc = charIDToTypeID( "#Prc" );
                        desc25.putUnitDouble( idOpct, idPrc, 0.000000 );
                        var idLctn = charIDToTypeID( "Lctn" );
                        desc25.putInteger( idLctn, 4096 );
                        var idMdpn = charIDToTypeID( "Mdpn" );
                        desc25.putInteger( idMdpn, 50 );
                    var idTrnS = charIDToTypeID( "TrnS" );
                    list4.putObject( idTrnS, desc25 );
                desc18.putList( idTrns, list4 );
            var idGrdn = charIDToTypeID( "Grdn" );
            desc17.putObject( idGrad, idGrdn, desc18 );
        var idgradientLayer = stringIDToTypeID( "gradientLayer" );
        desc16.putObject( idType, idgradientLayer, desc17 );
    var idcontentLayer = stringIDToTypeID( "contentLayer" );
    desc15.putObject( idUsng, idcontentLayer, desc16 );
executeAction( idMk, desc15, DialogModes.NO );
// move layer below;
var theGradient = myDocument.activeLayer;
theGradient.move(theLayer, ElementPlacement.PLACEAFTER);
// clipping mask;
theLayer.grouped = true

I have iWork's 9 that inludes pages 4.3. I created a document that I saved. When I tried to open the document today, I was advised I needed a newer version of pages to open the document. Why can't I open an existing pages document?

I have iWorks 9 that includes Pages 4.3. I created a document and saved it as a "pages" file. When I tried to open the document the next day, a dialogue box told me I needed a newer version to open the file. The information provided stated the new app would cost $19.99 and the customer ratings are quite low. Why can't I open a previously created document in iWorks, regardless of the version. This is the first time Apple has demanded that I pay for a new version to open existing documents.

I am with Peter on this issue. Additionally, if you installed the latest IOS Pages (v2.01) on an iPhone or iPad and opened a .pages file on iCloud that was created by Pages ’09 v4.n, or IOS Pages v1.7.n — that document is now in the new .pages file format and only Pages v5 on OS X can open it.

How do I create a new layer that is only visible in the current animation frame?

Normally when you create a new layer it's automatically visible in all animation frames. I want to set it so that the new layer is only visible within the frame it was created.

I was doing some playing with frames just to verify what is going on. and as far as I can see when you create a new layer it is applied to the last frame only, but if you create a new frame is is copied.
What I did was create 2 layers one a background gradient, second is a raster rectangle.
For frames, the first is the background, second is the rectangle and the third is the same rectangle, now I can click on either frame and move that rectangle.

How can I create a new calendar that starts the week on monday?

Excel can do it, but I really like the template for calendars in numbers. That calendar is for printing it, so i don't need any special functionalities, only the template, with blank cells i can hand-write in.
Thanks!

Hi And95es,
The Calendar template is very clever. Changing it to start on Monday would be a huge task. Here is an idea for a non-automatic calendar. Start with a table for month and year. Hide the table name if you like.
A1 is a pop-up menu to choose a month. Type the year in B1. I am trying to come up with a formula to show the day of the week for that month and year in B2. This is because you will have to type a 1 into the correct day in the calendar table to generate dates for the whole month.
Create an outline calendar like this:
A2 contains the number 1
B2=A2+1 and fill right
A4=G2+1
B4=A4+1 and Fill Right.
Now select Row 4 and copy.
Paste into every second row below.
Format the table to make cells big enough to write in. Save as Template because you are about to make a calendar and you will need the template for next month.
Type a 1 into the cell that is the first of that month. Now clear contents of cells you don't need.
It would be handy to have a formula to show weekday for the first of the month. Not essential!
Regards,
Ian.

How do I create a new movie in iMovie 10.0.2; problem with new event

AS many others are, I'm having trouble with imovie 10.0.2
When I try to Create a new movie, after I select a theme, a small box opens, asking for a name
and which Event to use. The default event is "Updated Projects," and the dropdown arrows reveal other selections, but they are all the events that came over from imove 9. Why won't it let me select a new event? And what is the purpose of the Updated Projects.
And if you'll allow one more: I'd rather use imovie 10, but it appears that my recent iphoto videos are no longer made available for use in this version when I open iphoto videos when trying to make a movie - is this correct? Thanks, jeb

Thanks. I now see that I need to go to File then start new event there.
And on the "updated projects" point, I'll have to play around with that so I can understand it better, I hope.
But on my last point, to clarify, I can access my iphoto videos using the CURRENT version of imovie, but when I use the LAST imovie version, I can only get iphoto videos that were imported into iphoto PRIOR to my upgrading to Mavericks (at least I think that is what has happened?!). ( and I'm using the most recent version of iphoto in all instances) Any other thoughts on this? Thanks.

Is it possible to create a new List from another List's template and NOT carry over the associated Workflow?

Related to
this post, in cases where it's desirable to have two different workflows for two different Lists—is it possible to NOT bring forward a hardwired workflow when creating a new List from a saved template?
I.e. List #2 still has the workflow from List #1 hardwired in. List #1 still needs its workflow but List #2 wants to have a separate Workflow.

More importantly, because it's relatively easy for most folks to just start from scratch with a new Workflow—how does one disassociate a carried-over Workflow from the new List?
Use the web-GUI. (List Settings > Workflow Settings)
From Designer, there's a shortcut button at the top of the page in the Workflows tab: "Administration Web Page".

How do I create a time field that's export value is 3 hours ahead of the current time?

I need to create a field on one of our forms that takes the current time from another field and adds 3 hours to it. The JavaScript to pull the current time is:
var tm = this.getField("Time");
if(tm.value == '' || tm == ' ') tm.value =
util.printd("HH:MM tt",new Date());

Does your posted script work as expected?
It does not fill-in the field for me.
Is that code to get the time from a field or set the time for a field?
Is the field you are trying to update?
A time string for a computation is very limited or error prone unless it includes the date. There are many locations in the world that still observe Day Light Savings Time or Summer/Winter time and the time either moves forward one hour or falls back one hour at a certain date and time as prescribed by national or local law. So if one want to add 3 hours 1 hour before the time sift for the spring that would be 11:00pm adding 3 hours would result in a time value of 3:00 am the next day and not 2:00 am the next day. The hour between 1:00 am and 2:00 am does not exist for the local time zone.

How can I create a DVD image that PC users can retrieve and burn...

I need to create a DVD disc image that PC users can retrieve from a private network share and burn to a blank DVD. Once burned, it needs to auto-start at the Menu. The master works fine. Images burned using the Mac Disk Utility work fine. But I have little control over who will download the image or the method by which they will burn it, so I need to provide visitors with guidance. Thank you in advance for any assistance you can provide.

Thank Jeff for this one.....
http://homepage.mac.com/geerlingguy/macsupport/mac_help/pages/0023-convert_dmg_imgiso.html
I've also heard that you can just copy an ".img" iDVD image to a pc, change the extension to .iso and then burn with Nero, etc. But I haven't tried it myself.....
John B.

How do I get my new gmail password to work on iPhone and iPad? Tried the basics already.

Hi I had to reset my password for my gmail account and since then have been unable to load my gmail on either my phone or iPad. After resetting I am unable to load my gmail account on both my iPhone and iPad instead I get the error message, "Cannot Get Mail The user name or password for 'imap.gmail.com' is incorrect." I've seen that others have had similar problems would like some guidance. Thank you.

You have to go into Settings/Mail,Contacts,Calendar, tap on the gmail account, and enter the new password. I 2 places, one for incoming, one for outgoing.

How do I create a new document that is 8" X 8" and with Print as the document profile?

Similar Messages

Maybe you are looking for