Creating a Quote box for message forums on Safari?

I have a MacOSX and I would like to know if there is a way to create a gray or colored box to hold quotes from other posters on a message board? I have no problem copying and pasting highlighted text to a post, but it is always plain text and looks like part of my message. Any help is greatly appreciated!!

Last time to try
The only change I made was instead of yellow I entered gray in the html. I tried to use this on CBS Sports message boards, but was unsuccessful. I think each web site has their own method of editing a post.
MacOSX Mac OS X (10.4.9)
MacOSX Mac OS X (10.4.9)

Similar Messages

LSMW: ALE/IDOC, getting the Create a partner profile for message type

Hi Gurus,
In my current project, i need to upload the employee data using the ALE/IDOC method with the LSMW
when i'm generating the idoc in the 13th step, its posing the information message stating that:
Create a partner profile for message type 'ZEMP_MSG'
In partner profile i already assigned the message type .
How to solve this issue, <inappropriate urgency removed by moderator>
Thnks&regards,
sree
Edited by: Thomas Zloch on May 13, 2011 9:55 AM

This forum's aim is not only to search for information and ask the members questions, but also to share knowledge. When you have asked a question and found a solution, do share with the rest.

An error occured while creating the original attribute for message no26 296

Hi All,
I am new to DMS , we are trying to store PM documents on content server , created a storage category and while assigning files to storage category then on saving the document i get the below error :
An error occured while creating the original attribute for
Message no. 26 296
Diagnosis
An error occured while creating an original in the Knowledge Provider.
System Response
The original could not be created.
Procedure
Contact the systems administrator and check the log file (transaction Evaluate application log, object SDOK).
Please let me know what configs i am missing ...
Thanks in advance
regrds
pushpa

Hi Pushpa,
Which enhancement package are you on currently? This is observed in cases where originals in DIR's are invisible and sometimes error message 26296 occurs in transaction CV01n. Hence,please check your entries in the table SDOKPROP to avoid such a problem in your system.
Further,suggest you explore if the below resolutions can be adopted in your case.
http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=10321987
http://wiki.sdn.sap.com/wiki/display/PLM/OriginalsinvisibleafterEHP3or+EHP4
Regards,
Pradeepkumar haragoldavar

Error MSG : Create a partner profile for message type 'MATMAS'

Getting Error MSG : Create a partner profile for message type 'MATMAS'
While running LSMW Idoc generation process

See the below link and it has all screen shots how to configure ALE like partner profile,logical systems,RFC
http://searchsap.techtarget.com/general/0,295582,sid21_gci1130337,00.html

How to create instant quote tool for website? Customer enters height and width and price is calculated.

I am trying to create a instant quote tool for my site.. so customer type in there height and width and a price appears but I have no clue where to start.. is there any tutorial or would someone kindly give me some advice on how to do this on dreamweaver. I havent used Dreamweaver in years and I cant even remember anything now
Kind Regards

Well this is what I have soo far.. so I want to enter the height /width then if they want to add extras such as fixing options and cut out it will add to the product price ????
<!doctype html>
<html>
<head>
<div class="summary entry-summary">
        <h1 itemprop="name" class="product_title entry-title">Ral 1000</h1><div itemprop="offers" itemscope itemtype="http://schema.org/Offer">
    <meta itemprop="price" content="160" />
    <meta itemprop="priceCurrency" content="GBP" />
    <link itemprop="availability" href="http://schema.org/InStock" />
</div><div itemprop="description">
    <script src="https://apis.google.com/js/plusone.js" type="text/javascript">
</script>
<script type="text/javascript">gapi.plusone.go();</script>
<p>6mm, low iron, toughened glass, PAR
</div>
<div class="shortcode-google-plusone"><div class="g-plusone" data-size="standard" data-annotation="none"></div></div>
</p>
</div>
<form class="cart" method="post" enctype='multipart/form-data'>
        <table id="price_calculator" class="simple_price_calculator">
        <tr>
        <td style="text-align:right;">
          </td>
<script src="http://code.jquery.com/jquery-1.10.2.min.js"></script>
<script>
$(document).ready(function() {
$('#width').keyup(function() {
var height = $('#height').val();
var width = $('#width').val();
var price = (height * width / 1000000 * 325).toFixed(2);;
$('.price').html('Product price: £' + price);
</script>
</head>
<body>
<p><label for="height">Height (mm)</label>
<input type="text" name="height" id="height">
</p>
<p>
<label for="width">Width (mm)</label>
<input type="text" name="width" id="width">
</p>
<p>
</p>
</body>
</html>
    </tr>
</table>
<div class=" product-addon product-addon-add-fixing-option">
            <h3 class="addon-name">Add Fixing Option </h3>
    <p class="form-row form-row-wide addon-wrap-1738-add-fixing-option">
    <select class="addon addon-select" name="addon-1738-add-fixing-option">
                    <option value="">Select an option...</option>
                    <option data-price="5" value="silicone-adhesive-tube" >Silicone Adhesive Tube (<span class="amount">£0.00</span>)</option>
                    <option data-price="5" value="screws-and-drill-holes" >Screws and Drill Holes (<span class="amount">£6.00</span>)</option>
    </select>
</p>
    <div class="clear"></div>
</div><div class=" product-addon product-addon-add-extra-layer-multi-coloured-fine-glitter">
            <h3 class="addon-name">Add Cut Out and Notches </h3>
    <p class="form-row form-row-wide addon-wrap-1738-add-extra-layer-multi-coloured-fine-glitter">
    <select class="addon addon-select" name="addon-1738-add-extra-layer-multi-coloured-fine-glitter">
                    <option value="">Select an option...</option>
                    <option data-price="8" value="1" >1 (<span class="amount">£25.00</span>)</option>
                    <option data-price="15" value="2" >2 (<span class="amount">£50.00</span>)</option>
                    <option data-price="25" value="3" >3 (<span class="amount">£75.00</span>)</option>
                    <option data-price="25" value="4" > (<span class="amount">£100.00</span>)</option>
    </select>
</p>
</p><p class="price">Product Price: £</p>
    <div class="clear"></div>
</div><div id="product-addons-total" data-type="simple" data-price="160"></div>
        <input type="hidden" name="add-to-cart" value="1738" />
        <button type="submit" class="single_add_to_cart_button button alt">Add to cart</button>
            </form>
<meta charset="utf-8">
<title>Untitled Document</title>
</head>
<body>
</body>
</html>

Create a partner profile for message type - 'CRMXIF_ORDER_SAVE_M'

Hi
I am trying to create IDOC generateion through LSMW.
i AM GETTING THE MESSAGEcreate a partner profile for message type - 'CRMXIF_ORDER_SAVE_M'
How do I create this profile??????

Hi,
Execute transaction BD64.
Identify you distribution Model,
Select the leaf node, and from menu select
Environment->Generate Partner Profile
Here in you specify 'Output mode' and 'Processing Mode'.
Click on Execute.
Check if any error occurs (Marked with Red color).
Try creating the IDOCs
Best Regards,
Pratik Patel
Reward with points if it is of any help to you!

Creating a text box for someone to type in to.

Please can someone direct me... I need to create a simple
text box within a flash movie, which will allow the web user to
type information into. The information does not need to be sent
anywhere (i.e. is just for their own use), we just require the user
to them be able to print out the page, with the text box contents.
many thanks

use INPUT as text type instead of STATIC

How do I create a drop box for photos

I am looking for a way to have a place on my church's website where anyone can "drop" photos from events. Is this possible? Would it require a special log in? And if so, could it be made on only allow a person access to the drop box?

Hi Clairanya,
Please take a look at this post for a similar discussion : Re: How do I make it possible for clients to upload files to my website?
Regards,
Aish

Creating a "Drop Box" for different users

I currently have seperate user accounts for my wife and I and a user account for all our photographs. What I would like to do is have a folder on our respective desktops that is shared i.e in my Photos account I drop a photo into the folder and then when I am using my own account I can open that folder on my desktop and use the photo within my own account.
Could anyone suggest how best to do this?
Many thanks

Hi eeperman;
I think if you will go to Users in Finder an open the folder for another users you will discover if folder called Public that there is already a Drop Box. See if that helps.
Allan

How do you create a search box for visitors to search keywords on your website?

I know I did this a while back using dreamweaver and cannot figure out how I did it. I feel like I copy and pasted some html stuff into my site and it created itself. Can you do this or do you need to download something? If I need to download, any recomendations? Also, if html, anyone know where I can find it? OR if this is all wrong how do you do this? Thanks so much!

http://www.google.com/sitesearch/

List box for the select-options

Hi All
Can anyone send me a sample code to create a list-box for the select-options.

Hi vighnesh vasudevan,
Do like this for your select options for low and high also.
Parameters:
    p_quat TYPE char20
            AS LISTBOX VISIBLE LENGTH 30
            LOWER CASE OBLIGATORY.
*              AT SELECTION-SCREEN ON VALUE-REQUEST                    *
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_quat.
PERFORM fill_quarters.
PERFORM display_quarters.
*&      Form fill_quarters
*       text
FORM fill_quarters .
DATA:
* Field string to fill quarters in the year
    lfs_quarters TYPE LINE OF vrm_values.
REFRESH t_quarters.
lfs_quarters-key = '1'.
lfs_quarters-text = text-qu1.
APPEND lfs_quarters TO t_quarters.
lfs_quarters-key = '2'.
lfs_quarters-text = text-qu2.
APPEND lfs_quarters TO t_quarters.
lfs_quarters-key = '3'.
lfs_quarters-text = text-qu3.
APPEND lfs_quarters TO t_quarters.
lfs_quarters-key = '4'.
lfs_quarters-text = text-qu4.
APPEND lfs_quarters TO t_quarters.
ENDFORM.                    " fill_quarters
*&      Form display_quarters
*       text
FORM display_quarters .
CALL FUNCTION 'VRM_SET_VALUES'
    EXPORTING
      id              = 'P_QUAT'
      values          = t_quarters[]
    EXCEPTIONS
      id_illegal_name = 1
      OTHERS          = 2.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " display_quarters
Note: I think we are not able to display the list box for select options because i am not ever seen the list box in select options . No Probs try like above code.
See the following like it may help for you
Listbox for Select Options
Regards,
Mahi.

Creating a dialog box with OK and Cancel buttons without OADialogPage

Hi Experts,
i want to create a dialog box for Delete Confirmation means after clicking on delete it should pop up a small dialog box with OK/Cancel buttons
and need code for the same to handle the buttons.
i have created with OADialogPage but its showing in a complete page but i want to show those buttons in a small box.
Plz help.
THANKS IN ADVANCE.
Thanks
Raja.

Hi,
I have not tried using javascript in destination URI as suggested by Mukul.
I have tried the below code for opening a page as dialog box.
You can try it for your requirement by creating a dialog page of your own, say XXDialogPage (with OK and Cancel button)
StringBuffer l_buffer = new StringBuffer();
l_buffer.append("javascript:mywin = openWindow(top, '");
String url = "/OA_HTML/OA.jsp?page=/xx/oracle/apps/fnd/dialog/webui/OADialogPG";
OAUrl popupUrl = new OAUrl(url, OAWebBeanConstants.ADD_BREAD_CRUMB_SAVE );
String strUrl = popupUrl.createURL(pageContext);
l_buffer.append(strUrl.toString());
l_buffer.append("', 'lovWindow', {width:500, height:500},false,'dialog',null);");
pageContext.putJavaScriptFunction("SomeName",l_buffer.toString());
In dialog page's controller, you can forward it to the page onc ethe user selects OK or Cancel.
Pass the selected value back to the main page and further you can use it for deleting.
Regards.

Does a text box for an ebook have to be the exact size?

I'm using Indesign to create an ebook. The usable, non-bordered area of each page is 800 x 600.
For each page I use the Type Tool button to allow me to create a text box that fills the page area of 800 x600 pixels. I go to great effort to make sure it is aligned perfectly and exactly the right size. I have slight muscular problems in my hands which makes them unsteady so I sometimes don't draw the box exactly the same size and have to undo it and start again a few times. It would be easier for me if I didn't have to be so precise.
My question is if I used the Type Tool to draw a Text box that is bigger than the 800x600 page would this have repurcussions in how the ebook functions or displays or does it not make any difference?

I've not been using Master Pages.
I'm using Indesign to create an ebook which I will output an epub file.
I set the page dimensions then I have been adding a page as I progress and then using the Type Tool to create a text box for each new page.
So when you say 'ePub has no exact size predefined by the layouter it is like xhtml.' does this mean the text box size doesn't matter?

How to create the list box in the selection screen.

hai friends..
i want to create the list box for the selection screen input boxes.
thanks,
velu.

hi..
1. There are two important things :
a)PARAMETERS : a(10) TYPE c AS LISTBOX VISIBLE LENGTH 10.
b) Fm VRM_SET_VALUES
2. just copy paste
3.
REPORT abc.
TYPE-POOLS : vrm.
DATA : v TYPE vrm_values.
DATA : vw LIKE LINE OF v.
PARAMETERS : a(10) TYPE c AS LISTBOX VISIBLE LENGTH 10.
INITIALIZATION.
vw-key = '1'.
vw-text = 'Jan'.
APPEND vw TO v.
vw-key = '2'.
vw-text = 'Feb'.
APPEND vw TO v.
vw-key = '3'.
vw-text = 'Mar'.
APPEND vw TO v.
CALL FUNCTION 'VRM_SET_VALUES'
EXPORTING
id = 'A'
values = v
EXCEPTIONS
id_illegal_name = 1
OTHERS = 2.
regards,
veeresh

Partner profile for message type.

Dear All,
I am using bapi in lsmw for data conversion.
I am getting error in 13th step of lsmw, ie, when I execute Start Idoc Generation, it's saying,
Create a partner profile for message type - MATERIALVALUATION_PRICECHANGE.
I already created a partner profile and assigned in the initial screen of lsmw.
Kindly let me know where I am missing.
Thanks in Advance,
Ranjan

See if any of the follwing helps:
1. The port used in the partner profile should be a file port, not tRFC.
2. The checkbox 'Unicode Format' for the port LSMW in WE21 should remain unchecked.

Creating a Quote box for message forums on Safari?

Similar Messages

Maybe you are looking for