Creating a SSRS report with dynamic overlapping images

I have to create a report with the following requirement:
1: The first page has some hi-res images of 8 different geometric shapes with text in it. The location of the images on the page will be static, however the fill color of image can be either green or grey.E.g. one box can be green for one user , for other it
can be grey etc.
2: Export the report in excel,pdf and word
I am planning to use SSRS for this.
I am planning to create the report with superimposed images, e.g. green palette shape and grey palette shape superimposed on each other .Depending on the selection made by the user, I want to "Send to Back" or "Bring to Front." Can I change
the "Send to Back" or "Bring to Front" properties at runtime depending on parameters passed to the report?
Also, I want the image path to be configurable, so that when business wants to change the text or color of the image, I do not need to redeploy the code. I can just change the image.
how can I create the RDL such that the images are at the proper positions? DO I need to insert a tablix for proper positioning of the image?
Any suggestions?

Hi RachanaD,
As far as I know, overlapping of item does not work in the soft-break renderers like HTML, Word and Excel. However, it is work in hard-break renderers like PDF or TIFF.
In your case, we can insert text box in rectangle to work around the issue. We can insert an image in rectangle and another image insert in a text box. Then, put the text box in the rectangle.
In SSRS, we cannot use parameter to control the location of image. However, we can use go to report action to work around the issue. Please refer to the steps below:
Create two similar report, the difference between two reports is the location of these image.
In the first report, add a text box fill with “Send to Back”.
Add action “go to report” of the text box go to the second report.
In the second report, add a text box fill with “Bring to Front”.
Add action “go to report” of the text box go to the first report.
Hope this helps.
Regards,
Alisa Tang
If you have any feedback on our support, please click
here.
Alisa Tang
TechNet Community Support

Similar Messages

How to create a SSRS report with SharePoint 2013 team site's calendar?

Hi I have sp13 and SQL Data Rool (that brings up VS Shell 2010).
I need to build a report where the top part is to have a SP Team site's calendar for up coming week. The 2nd half would be a table with data from that same site. This report would then need to be embedded in a email that automatically sent to several
users on weekly basis.
I have the table data report created form the SP list. How can I get the calendar(display as a calendar that I see in the team site) on to the top part of this report?
Thank you.

Please follow this article to write SSRS reports with data source as SharePoint list/calendars etc. All document libraries, list and calendars are derived from base list class so you can use any of this type as a data source
http://www.mssqltips.com/sqlservertip/2068/using-a-sharepoint-list-as-a-data-source-in-sql-server-reporting-services-2008-r2/
Once your SSRS report is developed, you have multiple ways to show it in SharePoint
- upload to SSRS server and show in sharepoint in a page viewer web part or simply open it as a link in new window
- configure SharePoint environment with integration to SSRS and upload report to SharePoint library. Display report in a web part page using SSRS web part.
Moonis Tahir MVP SharePoint,MCTS SharePoint 2010/2007, MCPD.net, MCSD.net, MCTS BizTalk 2006,SQL 2005

What is the best way to create a SSRS Report with Header Data and its associated child data

So I have Member Information...Member ID...Member Addressing...etc.. I want to display this in the top part of the report like...
Member Name:
Member ID:
Member Address Line 1:
And then below I want to report on all the claims associated with a Member ID that is chosen by the Parameter. Obviously the Claim Data will be in Table format. Do I necessarily have to associate the Member Information with the Claim Information or simply
use the same parameter? And what is the best Toolbox item to use to display the Member Information on top?
Any help or guidance is greatly appreciated by this newbie.
Thanks for your review and am hopeful for a reply.
ITBobbyP

Hi ITBobby,
According to your description, you want to display all Claim Data for each Member. Right?
In Reporting Services, we can use a table to display those Claim Data and make them group on Member ID. If you want to display the Member Information, we can put the data fields on parent group level. Then we can use create a parameter to filter the Member
ID we need. We have tested this scenario in our local environment. Here are steps and screenshots for your reference:
1. Create a DataSet(DataSet1) which contains the data fields of Member and Claim.
2. Create a table and drag the Claim data into the table.
3. In Row Group. Right click on Details and add a parent group.
4. Select Member_ID in Group by.
5. Right click on the textbox of Claim data. Select Insert Row->Outside of Group-Above. Drag the MemberName into the inserted row.
6. In Report Data, right click on Parameter-> Add Parameter.
7. Type Member_ID in Name and Prompt, select allow multiple values.
8. In Available Values, select get data from a query. Choose DataSet1, select Member_ID in values and label. You can also set this in Default Values if you need.
9. Save and preview.
Reference:
Understanding Groups (Report Builder and SSRS)
Report Parameters (Report Builder and Report Designer)
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

SSRS reporting with sharepoint list using Distinct and Multivalue parameters

i want create ssrs report with sharepoint list using ms-vs(2008). i want create Distinct multivalue parameters by using CAML query. There is any way we put CAML query where we use Distinct keyword and IN clause in CAML query... i hope all experts will
understand my poor English... sorry for poor English.. plz help me

Hi AsifMehmood,
Per my understanding you have create an SSRS report with SharePoint list, now you don’t know to create the distinct parameters by using CAML query, right?
For the CAML language doesn’t have any reserved word (or tag) to set this particular filter to remove duplicate results, but we can use the custom code to do this function. I have tested on my local environment and we can do that by create one hidden parameter(Param1)
to get all the values from the fields which will add the filter and then create another parameter(Param2) to get the distinct values based on the Param1, we use the custom code to do the deduplication.
Step by Steps information in below thread for your reference to create the parameters and the custom code:
"How to get distinct values of sharepoint column using SSRS"
Other similar thread for your reference:
https://audministrator.wordpress.com/2014/02/17/sharepoint-list-add-distinct-parameter-value/
If your problem still exists, please feel free to ask and also try to provide us more details information.
Regards
Vicky Liu

How to create user editable Crystal Report with dynamic dataset

What I would like to achieve:
A program loads a report in runtime updates list of database fields (possibly includes sample data), open report in "Crystal Reports 2011" (or 2008) where user customizes report and saves it. Later on the program loads the report, fills actualized data and displays it in .net report viewer.
What I do:
CrReport = New CrystalDecisions.CrystalReports.Engine.ReportDocument
CrReport.Load(TemplateFilename)
Dim Results As DataTable
DataTable is filled from a database
CrReport.SetDataSource(mResults)
CrReport.SaveAs(NewReportPath, True)
The NewReportPath is opened in the default program.
What are the problems
The report is open in preview mode (not in design).
When the field is added to the report the designer asks for XML datasource on preview.

The short answer is that it is not possible. I broke the question to other two: How to save a report that it opens without preview? and How to create user editable Crystal Report with dynamic dataset, where it is possible to find details. Key answer is Re: How to create an editable previewable report?

SSRS Report with mutli select values in parameters

Hi All,
I am creating a SSRS report and displaying the result in tablix. I want to make the report to filter by multi select values from the parameters.
I have 3 parameters. For all the three parameters, I have set "Default Values" and "Available Values". Also, modified my result dataset to get the values from parameters using "WHERE ID = @Parameter1" (example) and so
on..
3 Parameters types: 1. Yes or No
2. Date 3. Values with NULL in the DB
Problems:
1. When I am passing the default values "Yes" "No" - it is throwing errors because default values is passed as Yes "AND" No instead of "OR" condition. The value stored in the DB wil have either Yes or No but not both.
2. When I am querying the date values, it is a DateTime field in the DB. But I have queried like SELECT CONVERT(DATE, EXE_DATE) AS DATE FROM table which is giving only date in SQL but in SSRS displaying date with time.
3. When I pull the list of values for third Parameter from SQL, it has some NULL values. When I try to use it in SSRS, it is not displaying the NULL value as select option in the list of values
Any suggestions for the above three problems for SSRS with multi select values as filter will be helpful.
Maruthu | My Blog

Hi Maruthi,
Regarding the three things:
1.) I believe your first parameter is mutliselect , please convert it to single select.
Steps:
a.) Select the parameter, right click and go to parameter properties
b.) Under General Tab in DataType section remove the checkbox for Allow Multiple Value.
2.) Instead of returning as the date please return string. For example :
SELECT CONVERT(VARCHAR, GETDATE(),101)
Here is the list of conversion : http://www.sqlusa.com/bestpractices/datetimeconversion/
3.) As such there is no concept of null in SSRS. (Its a relational concept) . We do have nothing , which means empty. In Order to use null please select the Allow null option in the DataType section of the Parameter, This will add an checkbox for null in
the report preview. Its developer job to handle the null values in there query.
Regards Harsh

SSRS report with tabular model – MDX query CoalesceEmpty function does not return the provided string value

Hello everyone,
I created following calculated member in MDX query. I am using it in one of the report parameter in dataset (single select dropdown list as report parameter).
WITH MEMBER [Measures].[ParameterCaption] AS
CoalesceEmpty([Customer].[National Account Code].CURRENTMEMBER.MEMBER_CAPTION,'None')
I would like to display 'None' text at the top of the dropdown list values. So that when user selects 'None' then this parameter will not considered in MDX query else the selected National Account Code will be considered to filter report data. But,
the above return blank/empty value for [Customer].[National Account Code].& member though I specified 'None' as text in CoalesceEmpty function. Any advice would be appreciated.
Thanks, Ankit Shah
Inkey Solutions, India.
Microsoft Certified Business Management Solutions Professionals
http://www.inkeysolutions.com/MicrosoftDynamicsCRM.html

Hi Ankit,
It seems that you issue had been solved in your another thread.
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/5a5becac-226f-428a-95b0-aaaa22733818/ssrs-report-with-tabular-model-create-a-dropdown-report-parameter-with-none-option-as-the-top?forum=sqlanalysisservices#0e51bf8c-a66c-4df5-a244-0147728fdfdb
iif([Customer].[National Account Code].CURRENTMEMBER.MEMBER_CAPTION="","None",[Customer].[National
Account Code].CURRENTMEMBER.MEMBER_CAPTION)
I marked this reply as answer, it will benefit to other members who have the similar issue.
Regards,
Charlie Liao
TechNet Community Support

Unable to save the Crystal Report with Dynamic paramters in Enterprise

Hello,
We are not able to save our Crystal Report with dynamic parameters in Enterprise, Error message as follows :
"Failed to read data from report file C:\DOCUME1\...\crw{...}.rpt. Reason : Failed to read parameter object"
CR Developer Version 12.0.0.683
help us in this regard..
thanks,
Narasimha Murty

Hello,
The error message occurs because the user or group who created the LOV does not have the appropriate rights in Business View Manager.
Try this hope its helps
To resolve this issue follow the steps,
1.Log on to Business View Manager as administrator.
2.Click View > Repository Explorer.
3.Right-click Dynamic Cascading Prompts. Click Edit Rights.
4.Click the appropriate user or group receiving the error.
5.Click the Granted option for the right to View, Edit & Set Security rights.
6.Click OK. Close Business View Manager.
The user or group is now able to save a report with dynamic parameters to Enterprise.
Regards,
Vinay

How to generate report with dynamic variable number of columns?

How to generate report with dynamic variable number of columns?
I need to generate a report with varying column names (state names) as follows:
SELECT AK, AL, AR,... FROM States ;
I get these column names from the result of another query.
In order to clarify my question, Please consider following table:
CREATE TABLE TIME_PERIODS (
PERIOD     VARCHAR2 (50) PRIMARY KEY
CREATE TABLE STATE_INCOME (
     NAME     VARCHAR2 (2),
     PERIOD     VARCHAR2 (50)     REFERENCES TIME_PERIODS (PERIOD) ,
     INCOME     NUMBER (12, 2)
I like to generate a report as follows:
AK CA DE FL ...
PERIOD1 1222.23 2423.20 232.33 345.21
PERIOD2
PERIOD3
Total 433242.23 56744.34 8872.21 2324.23 ...
The TIME_PERIODS.Period and State.Name could change dynamically.
So I can't specify the state name in Select query like
SELECT AK, AL, AR,... FROM
What is the best way to generate this report?

SQL> -- test tables and test data:
SQL> CREATE TABLE states
2    (state VARCHAR2 (2))
3 /
Table created.
SQL> INSERT INTO states
2 VALUES ('AK')
3 /
1 row created.
SQL> INSERT INTO states
2 VALUES ('AL')
3 /
1 row created.
SQL> INSERT INTO states
2 VALUES ('AR')
3 /
1 row created.
SQL> INSERT INTO states
2 VALUES ('CA')
3 /
1 row created.
SQL> INSERT INTO states
2 VALUES ('DE')
3 /
1 row created.
SQL> INSERT INTO states
2 VALUES ('FL')
3 /
1 row created.
SQL> CREATE TABLE TIME_PERIODS
2    (PERIOD VARCHAR2 (50) PRIMARY KEY)
3 /
Table created.
SQL> INSERT INTO time_periods
2 VALUES ('PERIOD1')
3 /
1 row created.
SQL> INSERT INTO time_periods
2 VALUES ('PERIOD2')
3 /
1 row created.
SQL> INSERT INTO time_periods
2 VALUES ('PERIOD3')
3 /
1 row created.
SQL> INSERT INTO time_periods
2 VALUES ('PERIOD4')
3 /
1 row created.
SQL> CREATE TABLE STATE_INCOME
2    (NAME   VARCHAR2 (2),
3      PERIOD VARCHAR2 (50) REFERENCES TIME_PERIODS (PERIOD),
4      INCOME NUMBER (12, 2))
5 /
Table created.
SQL> INSERT INTO state_income
2 VALUES ('AK', 'PERIOD1', 1222.23)
3 /
1 row created.
SQL> INSERT INTO state_income
2 VALUES ('CA', 'PERIOD1', 2423.20)
3 /
1 row created.
SQL> INSERT INTO state_income
2 VALUES ('DE', 'PERIOD1', 232.33)
3 /
1 row created.
SQL> INSERT INTO state_income
2 VALUES ('FL', 'PERIOD1', 345.21)
3 /
1 row created.
SQL> -- the basic query:
SQL> SELECT   SUBSTR (time_periods.period, 1, 10) period,
2            SUM (DECODE (name, 'AK', income)) "AK",
3            SUM (DECODE (name, 'CA', income)) "CA",
4            SUM (DECODE (name, 'DE', income)) "DE",
5            SUM (DECODE (name, 'FL', income)) "FL"
6 FROM     state_income, time_periods
7 WHERE    time_periods.period = state_income.period (+)
8 AND      time_periods.period IN ('PERIOD1','PERIOD2','PERIOD3')
9 GROUP BY ROLLUP (time_periods.period)
10 /
PERIOD             AK         CA         DE         FL
PERIOD1       1222.23     2423.2     232.33     345.21
PERIOD2
PERIOD3
              1222.23     2423.2     232.33     345.21
SQL> -- package that dynamically executes the query
SQL> -- given variable numbers and values
SQL> -- of states and periods:
SQL> CREATE OR REPLACE PACKAGE package_name
2 AS
3    TYPE cursor_type IS REF CURSOR;
4    PROCEDURE procedure_name
5       (p_periods   IN     VARCHAR2,
6        p_states    IN     VARCHAR2,
7        cursor_name IN OUT cursor_type);
8 END package_name;
9 /
Package created.
SQL> CREATE OR REPLACE PACKAGE BODY package_name
2 AS
3    PROCEDURE procedure_name
4       (p_periods   IN     VARCHAR2,
5        p_states    IN     VARCHAR2,
6        cursor_name IN OUT cursor_type)
7    IS
8       v_periods          VARCHAR2 (1000);
9       v_sql               VARCHAR2 (4000);
10       v_states          VARCHAR2 (1000) := p_states;
11    BEGIN
12       v_periods := REPLACE (p_periods, ',', ''',''');
13       v_sql := 'SELECT SUBSTR(time_periods.period,1,10) period';
14       WHILE LENGTH (v_states) > 1
15       LOOP
16         v_sql := v_sql
17         || ',SUM(DECODE(name,'''
18         || SUBSTR (v_states,1,2) || ''',income)) "' || SUBSTR (v_states,1,2)
19         || '"';
20         v_states := LTRIM (SUBSTR (v_states, 3), ',');
21       END LOOP;
22       v_sql := v_sql
23       || 'FROM     state_income, time_periods
24           WHERE    time_periods.period = state_income.period (+)
25           AND      time_periods.period IN (''' || v_periods || ''')
26           GROUP BY ROLLUP (time_periods.period)';
27       OPEN cursor_name FOR v_sql;
28    END procedure_name;
29 END package_name;
30 /
Package body created.
SQL> -- sample executions from SQL:
SQL> VARIABLE g_ref REFCURSOR
SQL> EXEC package_name.procedure_name ('PERIOD1,PERIOD2,PERIOD3','AK,CA,DE,FL', :g_ref)
PL/SQL procedure successfully completed.
SQL> PRINT g_ref
PERIOD             AK         CA         DE         FL
PERIOD1       1222.23     2423.2     232.33     345.21
PERIOD2
PERIOD3
              1222.23     2423.2     232.33     345.21
SQL> EXEC package_name.procedure_name ('PERIOD1,PERIOD2','AK,AL,AR', :g_ref)
PL/SQL procedure successfully completed.
SQL> PRINT g_ref
PERIOD             AK         AL         AR
PERIOD1       1222.23
PERIOD2
              1222.23
SQL> -- sample execution from PL/SQL block
SQL> -- using parameters derived from processing
SQL> -- cursors containing results of other queries:
SQL> DECLARE
2    CURSOR c_period
3    IS
4    SELECT period
5    FROM   time_periods;
6    v_periods   VARCHAR2 (1000);
7    v_delimiter VARCHAR2 (1) := NULL;
8    CURSOR c_states
9    IS
10    SELECT state
11    FROM   states;
12    v_states    VARCHAR2 (1000);
13 BEGIN
14    FOR r_period IN c_period
15    LOOP
16       v_periods := v_periods || v_delimiter || r_period.period;
17       v_delimiter := ',';
18    END LOOP;
19    v_delimiter := NULL;
20    FOR r_states IN c_states
21    LOOP
22       v_states := v_states || v_delimiter || r_states.state;
23       v_delimiter := ',';
24    END LOOP;
25    package_name.procedure_name (v_periods, v_states, :g_ref);
26 END;
27 /
PL/SQL procedure successfully completed.
SQL> PRINT g_ref
PERIOD             AK         AL         AR         CA         DE         FL
PERIOD1       1222.23                           2423.2     232.33     345.21
PERIOD2
PERIOD3
PERIOD4
              1222.23                           2423.2     232.33     345.21

I'm getting the below issue when I try to deploy a report with Dynamic parameters, when I deploy it with static parameters I'm not getting this issue.

I’m getting the below issue when I try to deploy a crystal report with Dynamic parameters in BI Launch Pad, when I deploy the same report with static parameters I can deploy and run it. I have Restarted the BI server, still the issue exitno use. kindly help me on this issue.
“This error occurred: Adding Crystal Report "CrystalReport1.rpt" failed. The server with kind rptappserver returned an error result. Failed to copy the report file to the report object. Refreshing the report object properties might have failed. Failed to read data from report file CrystalReport1. Reason: Failed to read parameter object”.

BO does not run dynamic params through the report as would happen without BusinessObjects (BO) or Crystal Reports Server (CRS). When you publish a report with dynamic parameters to BO/CRS, the prompt is published to the repository so that it can be accessed through the Business View Manager (which can be installed as part of the client tools). In order for this to work a couple of things need to happen:
1. You need to be sure that you check the "Update Repository" box on the Save As screen the first time you publish the report.
2. Your BO/CRS user needs to have "view" access to the Crystal2013ReportApplicationServer in the Servers section in the CMC - in fact, the Everyone group should be given view access to the server in order for dynamic prompts to work correctly.
3. In the Business View Manager, the Administrator user needs to give your user, or, even better, a Crystal Developers group full control access to the "Dynamic Cascading Prompts" folder.
Best practice for dynamic prompts in a BO/CRS environment is to actually create the prompts in the Business View Manager. This will allow you to create a single data connection that can be reused and also create lists of values such that the same list or prompt can be reused by multiple reports. If you just create the prompts in Crystal, you will end up with multiple data connections to the same database, the prompts will use the whole query for the reports to get the dynamic values instead of just a focused query to the lookup table that contains the values, and there ends up being lots of duplication and chaos.
-Dell

When attempting to create an SSRS Report in SharePoint 2010 Dashboard Designer and change the Server Mode from Report Center to SharePoint Integrated

Hi,
When attempting to create an SSRS Report in SharePoint 2010 Dashboard Designer and change the Server Mode from Report Center to SharePoint Integrated, I get the following unhandled exception:
************** Exception Text **************
System.InvalidOperationException: There was an error generating the XML document. ---> System.InvalidOperationException: Instance validation error: '2' is not a valid value for Microsoft.PerformancePoint.Scorecards.SqlReportViewData.SqlReportViewDataServerMode.
   at Microsoft.Xml.Serialization.GeneratedAssembly.XmlSerializationWriterSqlReportViewData.Write1_SqlReportViewDataServerMode(SqlReportViewDataServerMode v)
   at Microsoft.Xml.Serialization.GeneratedAssembly.XmlSerializationWriterSqlReportViewData.Write3_SqlReportViewData(String n, String ns, SqlReportViewData o, Boolean isNullable, Boolean needType)
   at Microsoft.Xml.Serialization.GeneratedAssembly.XmlSerializationWriterSqlReportViewData.Write4_SqlReportViewData(Object o)
   --- End of inner exception stack trace ---

Hi,
According to your post, an error occurred when you integrate SQL Server Reporting Services with SharePoint.
1. Please check the steps as the link below:
http://technet.microsoft.com/en-us/library/ff724283(v=office.14).aspx
2. Try to clean the configuration cache on all of your SharePoint servers and re-tested.
http://blogs.msdn.com/b/josrod/archive/2007/12/12/clear-the-sharepoint-configuration-cache-for-timer-job-and-psconfig-errors.aspx
Best Regards
Dennis Guo
TechNet Community Support

How can i create Standard master Report with Client standards .

HI Gurus,
We are creating somany reports. for each time we have to redesign same work.. My client has some standards every report should looks same. I mean Logo, Client Name, Color of the bar, font size, Style, Format, back ground color etc......
Is there any way we can create one master report with all my client standards. Then developers no need to do same work again and again in each and every report.
Please help me on this issue it will help lot of our developers time.
Thanks in Advance for your help

hi,
even your question is really large and generic,
a very good start is this blog,
http://obiee101.blogspot.com/2008/09/obiee-setting-up-compagny-custom-skin.html
also check from the same blog,all the threads related with skin.
The main idea is to have configured all the views...images,logos,colors...and so on...
As far as presentation of "letters" / "numbers" at reports , in the configuration of each column,you can select to be this style default for the whole scenario..(i,e, always calendar.date column has 11-verdana-bold size...and so...)
Your most valuable tool is firebug,with this you can change the css....(more details in blog...)
hope i helped....
http://greekoraclebi.blogspot.com/
///////////////////////////////////////

Submit report with dynamic selections

Hi All,
I am trying to Submit a report with dynamic selections. I am using the option SUBMIT REPORT WITH FREE SELECTIONS.
But the dynamic selections are not getting passed.
Request you to kindly provide some inputs
My code is
DATA: trange TYPE rsds_trange,
      trange_line LIKE LINE OF trange,
      trange_frange_t_line LIKE LINE OF trange_line-frange_t,
      trange_frange_t_selopt_t_line LIKE LINE OF trange_frange_t_line-selopt_t,
      texpr TYPE rsds_texpr.
trange_line-tablename = 'PA0002'.
*trange_frange_t_line-tablename = 'PA0002'.
trange_frange_t_line-fieldname = 'GBJHR'.
trange_frange_t_selopt_t_line-sign   = 'I'.
trange_frange_t_selopt_t_line-option = 'EQ'.
trange_frange_t_selopt_t_line-low    = '1987'.
trange_frange_t_selopt_t_line-high   = '1987'.
APPEND trange_frange_t_selopt_t_line TO   trange_frange_t_line-selopt_t.
APPEND trange_frange_t_line TO trange_line-frange_t.
APPEND trange_line TO trange.
CALL FUNCTION 'FREE_SELECTIONS_RANGE_2_EX'
EXPORTING
    field_ranges = trange
IMPORTING
    expressions = texpr.
submit RPCADVQ0
VIA SELECTION-SCREEN
                WITH SELECTION-TABLE rspar_tab
                WITH FREE SELECTIONS it_texpr
                and returN.
Kindly provide your inputs
Regards
Reshma

Hi Reshma,
Use the FM - RS_REFRESH_FROM_DYNAMICAL_SEL before FREE_SELECTIONS_RANGE_2_EX.
data: trange type rsds_trange,
          g_repid type sy-repid.
g_repid = 'RPCADVQ0'.
call function 'RS_REFRESH_FROM_DYNAMICAL_SEL'
    exporting
      curr_report        = g_repid
      mode_write_or_move = 'M'
    importing
      p_trange           = trange
    exceptions
      not_found          = 1
      wrong_type         = 2
      others             = 3.
if sy-subrc eq 0.
" Do the changes to the trange
CALL FUNCTION 'FREE_SELECTIONS_RANGE_2_EX'
EXPORTING
field_ranges = trange
IMPORTING
expressions = texpr.
submit RPCADVQ0
VIA SELECTION-SCREEN
WITH SELECTION-TABLE rspar_tab
WITH FREE SELECTIONS it_texpr
and returN.
endif.
Cheers,
Kothand

Is there a way to create SQL Dev reports with validated binds?

Is there a way to create SQL Dev reports with validated binds similar to the way user defined extensions can have <prompts> with a <value> that is a SQL statement returning a list of possible values?
This sure would make select appropriate values for binds in reports easier and less error prone.

Maybe a forum search on "Windows registry" would turn up some useful things. You're not the first to ask this. You might save yourself and everyone else some time if you'd simply do that.

How to schedule a report with dynamic parameters

We need to schedule a Webi report with dynamic parameters then email the different result to different email groups. Is it possible to do this in scheduler? Please advise. Thanks.

there are 2 schedulers
1st CMS
the reports which does not have any input parameters, only then t can be scheduled in CMS
2nd in Infoview
if report has input parameters and if you want to schedule it, then you may need to schedule the report from Infoview
To have a email notification
configure the SMTP server in report JOB Server
Thanks,
Ganesh

Creating a SSRS report with dynamic overlapping images

Similar Messages

Maybe you are looking for