Creating a system in portal with multiple instances of backend sys

Hi all,
         I am creating a system in the portal to my backend system(ECC6.0 with integrated ITS).I had a multiple instance backend system.The 2 instances are on two different boxes .The 2 instances have different ip addresses and hostnames.At a time only one instance will be active.We have a virtual ip and hostname for the Central instance.
In this case how to create the system so that the portal can switch from one instance to other while it is changed at the backend.
The major issue is how to fill the ITS properties while creating the system.Which hostname I have to give.
First instance hostname : eccprd1.XXXXXX.com
Second instance hostname :eccprd2.XXXXXX.com
Vitual hostname of central instance : eccsap.XXXXX.com
Any suggestions please.
Thanx and Regards,
Rajesh.A

Hi,
You can use the Dynamic Link Library SAPSSOEXT
Check out this link.
http://help.sap.com/saphelp_nw04/helpdata/en/12/9f244183bb8639e10000000a1550b0/content.htm
This should be applicable to any intended scenario.
Summary of Steps
1. Download file
2. create application as shown in sample file.
3. Import verify.der and install it in your local server , in the place specified in your application(.NET)
4. Run the planned scenario. The page(.NET Page) that will be initially accessed from SAP Portal should run your program or have that code , so that it can authenticate it without requesting userid and password.

Similar Messages

  • UCCE with multiple instance

    Hi everyone,
    I have a plan to install UCCE 8.0 with multiple instance in my lab environment.
    I'm not sute that, do I have to use hosted model or use enterprise and just create multiple instance on it.
    Actually, I want to implement multi-tenant , I'm not sure because I see that enterprise model also can add more than 1 instance.
    And if I use one of this model, could anyone tell me that what server I have to separate.
    Thanks in advance for your help.
    Regards,
    Tinnakorn

    Hi Tinnakorn,
    The Cisco Unified Contact Center Hosted (Unified CCH) solution is largely the same as Unified CCE, but it supports multi-tenant or shared servers to manage multiple customer instances. That is the reason you see the capability to add multiple instance, even in UCCE.
    All Unified CCE systems are deployed as a single instance (using the same instance name and number in setup) across all the Unified CCE components.
    Please refer to UCCE SRND for more details.
    Thanks,
    Hitesh

  • Sql server with multiple instance

    hi  All,
    i want  to  install sql server with two instance   and i want  to assign two  separate is  ips   for  both   default instance  and named  instance   and  both   should  work like
    two different server
    note:  If i  logged  with  one  ip(default instance)   it should  show  its  own  databases  not both or  named   instance  databases
    thanks 
     chintala

    Hi chintala,
    According to your description, if you want to assign the two different IP to stand for default instance 
    and named  instance, I recommend you set up aliases on a SQL Server with multiple instances. For example, a physical server is named WinServer and 2 instances of SQL Server named WinServer and WinServer\instance1.
    We need to add 1 IP addresse to the WinServer, there is one IP address already assigned to WinServer, 192.168.1.1, by adding one new IP's, 192.168.1.2 .
    We need to move into DNS to configure our host names and aliases.  The physical machine must be steup as a static IP in DNS. SQLAlias1, which point to the default instance on WinServer, will be setup as a DNS with an address of 192.168.1.1.
    SQLAlias2, which will point to WinServer\Instance1, will be setup as a new Host (A) record in DNS with an address of 192.168.1.2.
    When everything has been completed on the DNS side, you need to open up SQL Server Configuration Manager on WinServer and configure the protocols for each instance one at a time, restart the 3 SQL services.
    For more information about how to set up aliases on a SQL Server with multiple instances, you can review the similar article.
    http://kevine323.blogspot.com/2013/08/setting-up-aliases-on-sql-server-with.html
    Regards,
    Sofiya Li
    Sofiya Li
    TechNet Community Support

  • Portal with multiple layout !!!

    Hi,
    I've seen a lot of questions in this Newsgroup regarding the development of a
    portal containing multiple layouts, but no clear answers was given.
    If the only way to develop a portal with multiple layout is to not use the portal
    framework, please could you give me a detailed approach how to do it (maybe there
    is Howto document somewhere ...) !
    Thanks for your help, I'm stuck and unfortunately not very familiar with the product.
    /Julien

    Thanks Phil,
    OK, then could you explain me how to build a simple portal without the portal/portlet
    facilities, but taking advantage of the personnalization tags available.
    - e.g. Which APPLICATION_INI I need to setup ?
    I appreciate your help
    /Julien
    "Phil" <[email protected]> wrote:
    >
    Julien - BEA's next portal release (version 4.0) will
    have complete support for a variety of different
    layout templates. There will be a selection of layouts
    out-of-the-box as well as the ability to provide your
    own custom layout. Also, "tabs" will be added to the
    portal and each tab may use a different layout template.
    Version 4.0 is scheduled for Fall 2001.
    With previous versions of the portal product, you will
    need to edit/customize portalcontent.jsp and the jsp's
    it calls. The layout Html is spread through them, so it
    is not a fun excercise.
    -Phil
    "Julien GATTONI" <[email protected]> wrote:
    Hi,
    I've seen a lot of questions in this Newsgroup regarding the development
    of a
    portal containing multiple layouts, but no clear answers was given.
    If the only way to develop a portal with multiple layout is to not use
    the portal
    framework, please could you give me a detailed approach how to do it
    (maybe there
    is Howto document somewhere ...) !
    Thanks for your help, I'm stuck and unfortunately not very familiarwith
    the product.
    /Julien

  • UME ABAP PORTAL WITH MULTIPLE DB INSTANCES

    Hello xperts, there is a subject i would like to expose, we have a portal with UME ABAP, and we are integrating no-sap portals to the sap portal, in order to make single sign on we know is necessary todo a user mapping , using only one sap backend system,and several local portal users (ume java).
    I know it is not possible get back to ume java which is the default installed in a fresh portal installation, but what if we install a new instance with another system id and and using the same database instance? it is possible? (or some thing like that?)
    Thank a lot!!!
    Edited by: NWrscr on Jul 14, 2011 1:17 PM

    Hi,
    Hope you are doing good.
    I am not sure if i have understood the issue correctly, but you can give MCOD a shot.
    [http://www.sdn.sap.com/irj/sdn/index?rid=/webcontent/uuid/80d0613c-b806-2a10-2891-aae5bbcd1a79]
    This is still supported by SAP.
    Thank you and have a nice day :).
    Kind Regards,
    Hemanth
    SAP AGS

  • Error while creating a system in portal

    Hi,
    Iam trying to create a technical system(SAP System with Load Balancing) in the portal.When i try to test the connections im getting the following error:
    The WAS ping service (http://hostname:portnumber/sap/bc/ping) was not pinged successfully. If the ping service is not activated on the WAS, you can try to call the ping service manually.
    Can anyone please tell me how to resolve this?
    Please suggest.
    Regards,
    Padmalatha.K

    Hi,
    Pls check out these links on SLD-
    Steps to configure R/3 system to Portal implementation
    Configuration Guide for R/3 in SLD as backend system
    Configuring SLD in Sneak Preview SAP NetWeaver '04 Sneak
    /community [original link is broken]
    threadID=484726&tstart=0
    Regards
    Lekha

  • Problem with multiple instances of shared printers being installed on client computers when the spooler service is started

    Hello,
    We have Windows Server 2012 and clients using Windows 8.  We've been having some printer problems for awhile now that I haven't been able to figure out for the life of me.  The main problem is the fact that printers are installed on computers automatically
    once the drivers are installed.  The side-effect of multiple instances of each printer showing up is very annoying but I suspect fixing the initial problem will resolve this secondary one.
    Here is the rundown:
    We add the shared printers on logon to the clients using the GPO thus installing the drivers locally.
    Whenever the spooler on the client is restarted with the drivers installed, all of the
    shared printers that were previously installed get duplicated 5 more times (for a total of 6 instances of each shared printer) on the "Devices and Printers" page.  This happens
    all the time.
    Removing them only fixes the issue temporarily, as soon as the spooler or computer is restarted, it seems these shared printers are somehow found on the network and the duplicates return.
    Two of these printers are located on different clients, installed locally and shared while the other three are all installed on a server and shared through it.  The issue is the same on all of them.
    Cleaning the spooler completely (registry and files from C:\system32\spool) fixes the issue temporarily as well since, as soon as the drivers are reinstalled, the issue occurs again.
    I've tried many things (disabling the GPO, editing the GPO, printer shares, registry, etc.) and searched tirelessly online for a cause and solution but I'm stumped.  Does anybody have any idea what might be causing this problem and how to resolve it?
    Thanks for your time!
    Update #1: I just tried adding the NoNetCrawling option in the registry found in this article -> http://support.microsoft.com/kb/320138/en-us
    I couldn't find the same for Windows 8 unfortunately.  I also tried disabling network discovery and all other sharing options to no avail.
    Update #2: I tried isolating the computer to a different subnet and restarting the spooler and, sure enough, the issue didn't occur.  This proves that the issue is network share related.  Also, as soon as I change the IP back to the regular domain
    subnet one, the multiple printer instances re-appeared again.
    Update #3: I just tried doing the same thing but on the server where the printers are installed and shared and, sure enough, despite being in a different subnet, the issue occurred.  This leads me to believe there is a setting on this server at fault.
     Question is, which one?

    We have deployed a brand new Active Directory domain for a customer. ALL the servers without exception are Windows 2012 R2 and all clients are Windows 8.1 32bit VDI clients.
    The issue that we have is around network printers. 
    We are deploying 4 printers  from a Windows 2012 R2 Server via the print management/Deploy Printer and assigning that to a GPO. The printers are deployed to the Computers which should mean that the users get all 4 printers which they then should be allowed
    to set their default and personal settings for that printer.
    Our printers are deployed like this:
    1. Created security group
    2. Assigned VDI computers to the security group
    3. Created GPO to reflect security group
    4. Modify GPO to do security filtering based on computer group membership
    5. Deployed 4 x printers through Print Management to the GPO on a per machine basis
    However, on the users Devices and Printers screen we are not seeing the 4 printers. For some users
    they see duplicates of all 4 printers so e.g they can have upwards of 8 or more. Other users have no printers displayed whatsoever. The next time they log off or restart they then have a different amount of printers displayed.
    If they try and set the default then it will set and the next time they check the default may have moved to another printer even without logging off or back on.
    Now, where this gets strange is within an application such as MS Word 2013 or Notepad if they use the file and print menu the printers will be listed, even if the user has no printers displayed in Devices and Printers. If the users selects a printer then they
    can then print OK.
    If we check HKCU\Printers||Connections then the CORRECT 4 printers are showing as to what is being deployed via the GPO so I know that the Windows 8.1 terminals are receiving the correct printers from the GPO.
    To try and correct this over the course of the week we have deployed the printers via Group Policy Preferences to the user and then the PC to no avail. Currently we are using the Print management\Deployed Printers to deploy all 4 printers to the computer via
    the Computer GPO.
    I believe that this issue is related to the display somehow in Devices and Printers rather than a GPO or print server issue as we can see via the registry the clients are receiving the 4 correct mentioned printers as shown in the registry. 
    FYI: We only have around 30 users and all users are getting this problem. All users are receiving the same GPO's and have the same few apps installed, Office 2013, Adobe Reader etc.
    What we want is for the computers to receive all 4 printers. All users should be able to use all 4 printers but the user should be able to select their particular default, depending where they are located or what they are printing that particular day. Their
    particular default should persist after reboot. (We have 2 x Copiers and 2 x HP Laserjets) All users have redirected documents and desktop but the rest of the profile is on the VDI and persists after their reboot. The profile is not roaming as the user is
    assigned a particular VDI.
    After a week of scratching our heads with this we are open to suggestions and any would be appreciated.
    We have tried following the issues on this thread to no avail either as they still return.

  • Error while creating MDM system on Portal

    Hi All,
    I am trying to create MDM system in EP. MDM is 5.5 SP06. EP is 7.0 . We have upgraded the MDM sca files on Portal from SP05 to SP06.
    While creating the system , after entering the server, we are getting the following error.
    com.sap.mdm.internal.protocol.manual.ServerException: File failed a crc check
    Please help
    Regards
    Shilpa

    Hi Shilpa,
    If this is your MDM build version 5.5.63.80 SP06. It means you are using MDM 5.5 SP06 Patch3 hotfix 80.
    You need to find the Sca file of compatible with this version.
    So they should be
    - MDMJAVAAPI06_03.sca
    - BPMDMAPPLN06_03.sca
    - BPMDMTECHN06_03.sca
    The hotfix number can slightly differ but the Support pack and patch number must match.
    You need to follow this link:
    http://service.sap.com/swdc
    (download MDM support packages) Download>support packages and patches>entry by application
    group>sap netweaver>sap mdm>sap mdm 5.5>Entry by component>Portal content
    Then select which MDM portal content you want and check what is the version of those available sca files.
    based on the availablity of the sca files you need to upgrade/downgrade or server.
    As compatibility between the server version and sca files is a must for proper functioning.If its not possible to change your mdm server version then you can ask your Basis team to hunt the matching sca files for you.
    Hope It Helped
    Thanks & Regards
    Simona Pinto

  • How to Create a system in portal server

    I am trying to do the tutorial: How to Create a JDBC-based iView for Add/Update/Delete Record.
    Its pre-requisite is: A system – with an alias “JDBC” – defined on your portal server, and mapped to a database.
    Since I am new to VC, I do not know how to create a system, and I also do not know how to access the portal server.
    Please help...

    Hi Makarand,
    Do you have any one who has the access to portal with administrator rights. I am hereby sending you the steps on how to create a system.
    To define a system:
    1. Create a new system; define all its properties
    2. Create a default system alias.
    3. Create a user mapping (from the user you use in VC) to the system alias, using the user\password to the backend system.
    4. TEST the connection in the portal. If the test succeeds, it should be visible in VC discovery panel.
    VC retrieves the systems via the portal.
    You have to define the systems or use the defined systems in the portal you are connected.
    To define systems in the portal:
    System Administration => system configuration => system landscape:
    in the PCD: right click on a folder and Add new system.
    Then you have to define all the mandatory properties: Connector / Was / User management ...
    don’t forget to map your portal user with an R3/JDBC user...
    thank you very much.

  • How to create Using Formatted Text Field with multiple Sliders?

    Hi i found the Java Sun tutorial at http://java.sun.com/docs/books/tutorial/uiswing/components/slider.html very useful, and it tells how to create one Formatted Text Field with a Slider - however i need to create Formatted Text Field for multiple Sliders in one GUI, how do i do this?
    my code now is as follows, and the way it is now is scroll first slider is okay but scrolling second slider also changes value of text field of first slider! homework due tomorrow, please kindly help!
    // constructor
    label1 = new JLabel( "Individuals" );
    scroller1 = new JSlider( SwingConstants.HORIZONTAL,     0, 100, 10 );
    scroller1.setMajorTickSpacing( 10 );
    scroller1.setMinorTickSpacing( 1 );
    scroller1.setPaintTicks( true );
    scroller1.setPaintLabels( true );
    scroller1.addChangeListener(this);
    java.text.NumberFormat numberFormat = java.text.NumberFormat.getIntegerInstance();
    NumberFormatter formatter = new NumberFormatter(numberFormat);
            formatter.setMinimum(new Integer(0));
            formatter.setMaximum(new Integer(100));
    textField1 = new JFormattedTextField(formatter);
    textField1.setValue(new Integer(10)); //FPS_INIT
    textField1.setColumns(1); //get some space
    textField1.addPropertyChangeListener(this);
    //React when the user presses Enter.
    textField1.getInputMap().put(KeyStroke.getKeyStroke(KeyEvent.VK_ENTER, 0),  "check");
            textField1.getActionMap().put("check", new AbstractAction() {
                public void actionPerformed(ActionEvent e) {
                    if (!textField1.isEditValid()) { //The text is invalid.
                        Toolkit.getDefaultToolkit().beep();
                        textField1.selectAll();
                    } else try {                    //The text is valid,
                        textField1.commitEdit();     //so use it.
                    } catch (java.text.ParseException exc) { }
    label2 = new JLabel( "Precision" );
    scroller2 = new JSlider( SwingConstants.HORIZONTAL, 0, 100, 8 );
    scroller2.setMajorTickSpacing( 10 );
    scroller2.setMinorTickSpacing( 1 );
    scroller2.setPaintTicks( true );
    scroller2.setPaintLabels( true );
    scroller2.addChangeListener(this);
    textField2 = new JFormattedTextField(formatter);
    textField2.setValue(new Integer(10)); //FPS_INIT
    textField2.setColumns(1); //get some space
    textField2.addPropertyChangeListener(this);
    //React when the user presses Enter.
    textField2.getInputMap().put(KeyStroke.getKeyStroke(KeyEvent.VK_ENTER, 0),  "check");
            textField2.getActionMap().put("check", new AbstractAction() {
                public void actionPerformed(ActionEvent e) {
                    if (!textField2.isEditValid()) { //The text is invalid.
                        Toolkit.getDefaultToolkit().beep();
                        textField2.selectAll();
                    } else try {                    //The text is valid,
                        textField2.commitEdit();     //so use it.
                    } catch (java.text.ParseException exc) { }
    // State Changed
         public void stateChanged(ChangeEvent e) {
             JSlider source = (JSlider)e.getSource();
             int fps = (int)source.getValue();
             if (!source.getValueIsAdjusting()) { //done adjusting
                  if(source==scroller1)   {
                       System.out.println("source ==scoller1\n");
                       textField1.setValue(new Integer(fps)); //update ftf value
                  else if(source==scroller2)     {
                       System.out.println("source ==scoller2\n");
                       textField2.setValue(new Integer(fps)); //update ftf value
             } else { //value is adjusting; just set the text
                 if(source==scroller1)     textField1.setText(String.valueOf(fps));
                 else if(source==scroller2)     textField2.setText(String.valueOf(fps));
    // Property Change
        public void propertyChange(PropertyChangeEvent e) {
            if ("value".equals(e.getPropertyName())) {
                Number value = (Number)e.getNewValue();
                if (scroller1 != null && value != null) {
                    scroller1.setValue(value.intValue());
                 else if (scroller2 != null && value != null) {
                    scroller2.setValue(value.intValue());
        // ACTION PERFORMED
        public void actionPerformed(ActionEvent event) {
        if (!textField1.isEditValid()) { //The text is invalid.
            Toolkit.getDefaultToolkit().beep();
            textField1.selectAll();
        } else try {                    //The text is valid,
            textField1.commitEdit();     //so use it.
        } catch (java.text.ParseException exc) { }
             if (!textField2.isEditValid()) { //The text is invalid.
            Toolkit.getDefaultToolkit().beep();
            textField2.selectAll();
        } else try {                    //The text is valid,
            textField2.commitEdit();     //so use it.
        } catch (java.text.ParseException exc) { }
    ...

    if :p3_note_id is null
    then
    insert into notes (project_id, note, notes_month, notes_year) So, p3_note_id is NULL.
    Another option is that you have a trigger on table NOTES that generates a new note_id even for an update.

  • Create BI System in Portal

    Hi,
    I am trying to create BI system in EP 7 as a part of BI – EP integration.
    I have followed following steps:
    1. Start the iView System Administration -> System Configuration -> System Landscape.
    2. Choose New -> System from the portal catalog context menu.
    3. Now in the template I am not able to find R/3 with Load Balancing (SAP_R3_LoadBalancing) or Dedicated Application Server for R/3 System (SAP_R3_Dedicated). All I see is the following system:
    BI JDBC System
    BI ODBO-Compliant OLAP System
    BI SAP Query System
    BI XMLA-Compliant OLAP System
    EP 5.0 System
    HTTP System
    JDBC System
    KM Lotus System
    KM WebDAV System
    KM Windows System
    SAP system using connection string
    Now which system should I choose as template to create the BI system in EP? Or is there any other steps I need to follow.
    Thank you,
    CD

    BI EP integration is done using template installer using NWA or by using report RSPOR_SETUP
    please go through the note 917950
    note containg attachment of screen shots how to do each and every step
    Samrat

  • Creating Training manuals using FM with multiple SME's authoring

    Greetings from Norway!
    I am currently considering switching from an InDesign/InCopy workflow over to TC2. Our manuals are heavily dependent on SME input and participation, in fact they write a good deal along with the tech writers.
    Is is possible to have SME contribution using Frame if only the techwriters actually have Frame on their workstations? I have read alot and see that if you use WebDAV you can save the Frame file as a .xml file. Can the SME's write content in an xml format and then have the tech writers import it into the long document in Frame?  If my SME's want to write a new chapter outline for me to follow, is this possible with WebDAV?
    To get 2 licenses in Norway is going to cost us $4,500, so I want to make sure that I can still have the SME input without any problems. We have been using InCopy for this purpose, but are having too many little problems and I would like to move towards Frame.
    ANY input on working with Frame with multiple authors, some of which are not using Frame on their workstations, would be greatly appreciated!
    Thanks in advance,
    kathryn

    katinnorway wrote:
    Greetings from Norway!
    I am currently considering switching from an InDesign/InCopy workflow over to TC2. Our manuals are heavily dependent on SME input and participation, in fact they write a good deal along with the tech writers.
    Is is possible to have SME contribution using Frame if only the techwriters actually have Frame on their workstations? I have read alot and see that if you use WebDAV you can save the Frame file as a .xml file. Can the SME's write content in an xml format and then have the tech writers import it into the long document in Frame?  If my SME's want to write a new chapter outline for me to follow, is this possible with WebDAV?
    To get 2 licenses in Norway is going to cost us $4,500, so I want to make sure that I can still have the SME input without any problems. We have been using InCopy for this purpose, but are having too many little problems and I would like to move towards Frame.
    ANY input on working with Frame with multiple authors, some of which are not using Frame on their workstations, would be greatly appreciated!
    Thanks in advance,
    kathryn
    Hi, Kathryn:
    If you're currently outputting your manuals from InDesign - whether to paper or PDF - there's probably no immediate or compelling need to convert to FrameMaker.
    You'll have the same problems with SMEs maintaining strict style usage, whether in InCopy or Word for import into InDesign or FrameMaker, and you'll have the same problems with SMEs working in FrameMaker directly, even if your company should win a FrameMaker site license in a lottery.
    Even in departments whose members are experienced technical writers, maintaining rigorous style requirements isn't automatic or easy.
    One key reason to consider the Technical Communications Suite is its ability to create help systems. A related reason is its ability to create single-source material for reuse and/or multiple outputs; FrameMaker can work with content management systems, XML, and DITA. All of these are not trivial to implement.
    RoboHelp can work with Word files, if help systems ability is important to you. FrameMaker wouldn't be necessary.
    Though InDesign can work with XML, it currently isn't suited to the kind of XML authoring that FrameMaker is. It's not easy to author for XML in InDesign or InCopy, as it is in FrameMaker, and even in FrameMaker, it's not without problems. InDesign can't do DITA.
    It might be worthwhile to create a small-scale trial in which your SMEs work in Word or InCopy, or some other application whose output maintains style names. Import that material into you InDesign templates, then analyze the problems.
    One major problem will undoubtedly be inconsistent tagging of material with proper styles. A close second will be attempts by the users to apply custom formatting (overrides) to the content, rather than using styles. Other problems include inconsistent use of lists of items, and inclusion of items in running text.
    If you can define a simple set of styles and requirements that the SMEs agree to follow, importing their material to any style-conscious application will require less manual effort.
    If the SMEs will need to revise material that the technical writers send back, you'll want to experiment with round-tripping from your publishing application via RTF or Word file format and reimporting from whatever editing application the SMEs use. If SMEs will agree to edit in Acrobat, this is one way to avoid the inevitable round-tripping artifacts, though it requires manual attention from the technical writers.
    Using a single-flow layout - "single story" in InDesign terms, "single text flow" in FrameMaker terms, rather than the kind of discontinuous graphic-designer's visual layout of pasted page objects and separate stories, will make it easier to reflow revised content. This is the usual way that FrameMaker users work. InDesign's improved long-document tools make it possible to work the same way.
    HTH
    Regards,
    Peter
    Peter Gold
    KnowHow ProServices

  • Portal Runtime Error while creating  new system in portal content

    Hi
      Can anyone  solve my problem, i am geting error while creating new system in p ortal content
    Portal Runtime Error
    An exception occurred while processing a request for :
    iView : pcd:portal_content/com.sap.pct/admin.templates/iviews/editors/com.sap.portal.templateSelection
    Component Name : com.sap.portal.admin.templateselectionwizard.default
    com/sap/portal/iviewserver/cache/OClass.
    Exception id: 11:29_26/12/06_0014_5891950
    See the details for the exception ID in the log file

    Hi,
    Check this link for creating system object
    http://help.sap.com/bp_epv260/EP_EN/documentation/EP/N03_BB_InstallGuide_EN_US.doc
    Regards
    Arun

  • Creating users in enterprise portals with CUA as userbase

    Hi All,
       we are using CUA system for maintaining the users and we want this users to be used in enterprise portals. So while installing WebAs itself, we specified the connection details to this CUA system. then we installed portal and we were able to view the users of CUA in portal.
      now i am creating a user from portal, create user option in UserManagement. but i just get an error like, could not create a user.
    i checked out in system administration->umconfiguration-> sap system. all the details that we specified during the webas installation appear there by default.
    so could you please let me know what the problem could be
    thank you

    Raj,
    I know that your problem was solved, but I've come across following SAP link. Hope, it helps other ppl..
    TITLE: Requirements for Service User Used to Connect to SAP Systems
    http://help.sap.com/saphelp_ep60sp2/helpdata/en/8f/67d27676ace84080964d4c4223bb3c/content.htm
    Thanks,
    Pritesh.

  • Create new system and client with TDMS

    Hi all;
    I am tested the TDMS product with good results. I want create a new system and do one copy with time reduction time for new development system
    What it´s the best solution?
    - Install new system and do the client copy with TDMS
    or
    - System copy of production system, delete production client, create new client with UCUSV of productive system and copy client with TDMS?
    Thanks a lot

    Hi;
    It´s true :).
    Ok, one example, I have two systems, I want create system shell from A (client 900) to B . The central system is C
    In system B I don´t have any client but the Cross is diferent to system A
    I select in TDMS - ERP Shell Creation Package for SAP Release higher 4.6C
    System Definition;
    - Control system - C (all information it´s correct)
    - Sender system - A (Client 900)
    But i dont have any information about the receive system (A).
    When execute the synchronization appears the system A, but with any information (destination ID)
    and I have the error: Could not change password of RFC Destination sender system
    Any Idea
    thanks a lot for the help

Maybe you are looking for