Creating a tab list
How do I create this one in oracle apex?
https://99designs.com/designs/7318327-original
Isn't just normal page tabs in apex, at least it looks that way to me (probably because of the white bar below the tabs)
Similar Messages
-
Multiple Instances of the Same Excel Document in 'Alt-Tab' List
So I am having a very weird problem, and I can't seem to find an answer anywhere. I was recently given a new laptop at work with Windows 7 and Office 2010. It has worked pretty well so far, but recently I have been noticing something very strange. While
this problem is quite small, due to how I use windows and my habits of alt-tabbing between multiple documents throughout the day, it is causing a serious problem.
This typically only happens when I have multiple excel documents open, and am tabbing between them or other documents or windows. For example, I have ClientList.xlsx open and need to cut and paste a cell from it to FinalReview.xlsx. I have 'ClientList' open
and just clicked Control+C to copy a cell. I click on 'Alt-tab' and while the icon in the alt tab list appears to change, I am taken immediately back to the same document. What is happening is that there are actually two separate copies of 'ClientList'
in my alt tab list. If I press and hold 'Alt' and then hit 'tab' twice, I can pull up the other excel file, 'FinalReview'.
At any point in time, I can click on the 'Alt' button to see the list and see three Excel icons. There will be one large excel icon with the name 'Microsoft Excel - ClientList.xlsx', and then right next to it will be two smaller looking excel icons with
the names 'ClientList.xlsx' and 'FinalReview.xlsx' respectively.
Has anyone seen anything like this before? I have spend hours searching for a resolution on the internet, as well as calling my work's tech support line and have not found anything remotely close to this as even being an issue.
Thanks in advance for your help.Hi,
First, I would like to verify whether this issue only occurred with Excel? Have you checked the Excel settings? You can perform a
system restore to see how it works.
In addition, I suggest you try the following:
1. Test the issue in Clean Boot and
Safe Mode
2. Create a new user to test if this issue still exists.
Thanks,
Vincent Wang
TechNet Community Support
Mate, did you even bother to read the question? To mark your response as the answer is a complete load of garbage - you haven't even bothered to respond to the actual question. The correct answer is below from B.W._.
No wonder anyone wanting decent responses uses stack overflow instead of these ridiculous forums... -
How to create a pulldown list in numbers
how to create a pulldown list in numbers
Here is it:
Open Applescript editor
Copy the entire script and paste it into Applescript Editor
Compile it
Read the instructions at the top of the script
Run the script, following the instructions.
You can save the script and it will be available in the Scripts menu (on the right side of the menu bar where Time Machine , Airport, and all those icons are).
Copy and paste all of what is below:
-- Script to populate a Numbers pop-up list.
-- Instructions:
-- GUI scripting must be on in System Preferences
-- Create a list of items. Must be a contiguous range of cells in a table.
-- Select the range of cells to use as items in the popup.
-- Run the script.
-- A dialog box will appear asking you to select which cells you want to turn into pop-ups
-- Select the cells then click OK on the dialog box
set tValues to my doThis(1) -- get values of the selection
if tValues is not "" then
activate
display dialog "Select the cells where you want to create the PopUp." & return & "After that, click on the 'OK' button."
my doThis(tValues) -- set the cell format of the new selection to "PopUp Menu" and set the values of the each menu item
tell application "Numbers" to display dialog "Done"
else
tell application "Numbers" to display dialog "You must select the cells in a table before running this script."
end if
on doThis(n)
tell application "Numbers"
set tTables to (tables of sheets of front document whose its selection range is not missing value)
repeat with t in tTables -- t is a list of tables of a sheet
if contents of t is not {} then -- this list is not empty, it's the selected sheet
set activeTable to (get item 1 of t)
if n = 1 then return value of cells of selection range of activeTable -- return values of the selection
set format of (cells of selection range of activeTable) to pop up menu -- set the format to pop up menu
return my setValuePopUp(n) -- set value of each menu item
end if
end repeat
end tell
return ""
end doThis
on setValuePopUp(L)
tell application "System Events"
tell process "Numbers"
set frontmost to true
delay 0.3
set inspectorWindow to missing value
set tWindows to windows whose subrole is "AXFloatingWindow"
repeat with i in tWindows
if exists radio group 1 of i then
set inspectorWindow to i
exit repeat
end if
end repeat
if inspectorWindow is missing value then
keystroke "i" using {option down, command down} -- Show Inspector
else
perform action "AXRaise" of inspectorWindow -- raise the Inspector window to the front
end if
delay 0.3
tell window 1
click radio button 4 of radio group 1 -- the "cell format" tab
delay 0.3
tell group 2 of group 1
set tTable to table 1 of scroll area 1
set tc to count rows of tTable
set lenL to (count L)
if tc < lenL then -- ** add menu items **
repeat until (count rows of tTable) = lenL
click button 1 -- button [+]
end repeat
keystroke return -- validate the default name of the last menu item
else if tc > lenL then -- ** remove menu items **
repeat while exists row (lenL + 1) of tTable
select row (lenL + 1) of tTable
click button 2 -- button [-]
end repeat
end if
tell tTable to repeat with i from 1 to lenL -- ** change value of each menu item **
set value of text field 1 of row i to item i of L
end repeat
end tell
end tell
end tell
end tell
end setValuePopUp -
Unable to create the Invoice list
Hi
We are recently went to go live. We have an issue related to the Invoice list. The issue is like this..........
1. User wasnot maintained the information in Payer master data(Invoice list date & invoice dates).
2. He created the sales order, delivery & Billing for around 100 billing docs for the same payer.
3. Now he is asking for the Invoice list for the 100 billing documents.
Anybody can guide how we can able to create the Invoice list.
Thanks in advance.
With Regards
Ravi Kumar.T.N.Hi Ravi,
1. Assign the billing document types to the Invoice list type in customizing.
IMG --> SD --> Billing --> Invoice Lists --> Assign Invoice List type to Each billing type
Note that there are basically 2 standard types of Invoice lists, LG and LR. Select the billing document and assign to relevant Invioce List type [LG/ LR]
2. Maintain Invoice List dates in Customer master [Payer] billing tab.
3. Maintain the pricing condition types RL00 and MW15 in the relevant pricing procedure.
4. Maintain out put condition records for LR00 and RD01 [for Printing Invoice list]
5. After creating more than one billing docs, use T-code VF21, select the billing docs and execute. This will result in creation of Invoice list.
Regards,
Rajesh -
[Agentry] Identifying the selected object in multi-tab lists on iPad
hi all,
On iPad, we can create a multi-tab lists to group objects based on different criteria as shown below.
In my implementation, I created a Tile Display which holds a screen set called “Lists” with multiple list screens.
Once we select an object in one of the lists, we need to either display details of the it or execute some transactions on that object. Then I had difficulty to find a way to identify the selected object. Since this is a screen set inside a tile display. I first tried to see if I can drill down on the tile display.
As shown above, I cannot go further on the tile display.
Then I tried to see if I can find the object on the “Lists” screen set. There are four screens each of which has “selected object” option. During the application’s execution, the user may switch between lists/tabs. Is there any method we can figure out which tab/screen the user is currently on? With that piece of information, I can identify the screen and then the object accordingly.
My development environment is 6.0.42 and iOS 7.1.
If this is not correct way to accomplish such function, is there any work around available to present a workable multi-lists tile on iPad?
Thanks a lot.
-YangJason,
My following question might be a bit off the original topic. Please let me know if you want me to open a new post.
I actually tried the navigation as well as the list selection. The navigation did happen. However, instead of presenting the Lists screen in the original tile display, a new full screen is created after the navigation which covers the original screen on iPad.
This leads to a general question regarding the navigation on screen with tile display. For pocket PC, the navigation is straight forward as a new screen is going to be created to cover the original screen. On tablet, if tile display is used, is it possible to navigate to, i.e., activate the focus on, a particular screen inside a tile display?
Please let me know if I make my question clear.
Thanks a lot.
-Yang -
i created a tab canvas inside a content canvas, but after that, i want to create a new empty canvas by clicking the canvas node ,then "+" , but it always gave me a new canvas with the tab canvas in it as default. this problem happens when i use tab canvas , if i just use other items i.e. text, button,list, i can create a new empty canvas. Thanks.
I don't quite understand the steps you took to be able to recreate the problem. But you can change the canvas type of a canvas from the property palette.
-
If you have many tabs open (in my case 30 tabs), you cannot click every single tab with your mouse, you can only reach them by opening the tab list at the right.
You can create a folder with the home pages by using "Bookmark All Tabs" to open a specific page.
You can place that folder on the bookmarks toolbar or use the Bookmarks menu button that you can find in the toolbar palette to get access to that folder easily.
* Open the Customize window via "View > Toolbars > Customize" or via "Firefox > Options > Toolbar Layout"
* "Bookmark All Tabs" can be accessed via the right-click context menu of a tab on the tab bar.
* "Bookmark This Page" can be accessed via the right-click context menu of that browser page. -
Related to
this post, in cases where it's desirable to have two different workflows for two different Lists—is it possible to NOT bring forward a hardwired workflow when creating a new List from a saved template?
I.e. List #2 still has the workflow from List #1 hardwired in. List #1 still needs its workflow but List #2 wants to have a separate Workflow.More importantly, because it's relatively easy for most folks to just start from scratch with a new Workflow—how does one disassociate a carried-over Workflow from the new List?
Use the web-GUI. (List Settings > Workflow Settings)
From Designer, there's a shortcut button at the top of the page in the Workflows tab: "Administration Web Page". -
How to create a dropdown list to list the values from two different tables?
Hi,
I have the following requirement:
1. I have to create a dropdown list to display all the values from the second column of a table.
2. Another dropdown list to display all the values from the second column of another table.
3. A text box should help me to add the selected values.
How to get this done in a PDF? Please help.
Regards,
LathaIs this a LC form? Because Acrobat forms have no concept of tables, just
individual fields... -
Creating Custom Bullets & Lists in Pages 5.0
I cannot figure out how to create a custom numbered list in Pages 5.0. I had custom LISTS on my 4.3 Docs that did not migrate to 5.0. How do I create duplicate LIST STYLE in 5.0?
Thank you for your help.On the format menu on the right side, there is the font section, alignment section, spacing section, and bullets & lists section. Next to the bullets & lists section is a drop-down menu of preset lists. At the top-right of this menu is a plus sign. Clicking on this will allow you to create a new list in that menu and title it. From there, you will have to manually create your custom list change the type of bullets (numbers, roman numerals, letters, etc.) -- you might need to click on the disclosure triangle to the left of the bullets & lists title to see this part. When you finish with your custom list, there will be an asterik next to the title of the list, and if you click on that title, the drop-down menu will open up again and you can hit "Update" next to your list name. This should save the style for that custom list. Here is the most important part: When you have finished making this list, make sure you save the document as a template and select that template if you ever want to use that list. I have found that a custom list in a document (saved or deleted) that is not made into a template does not carry over into other documents. Setting up this custom list may take a while, but hopefully it will work and make things easier. I hope this makes sense, and let me know if you cannot understand something. Hopefully this picture will help too.
-
How to create a Custom List without the column "Title" ?
Maybe this one is easy as it sounds, I just want to know how to create a little list for my SharePoint application featuring 3 columns:
1 - User Name (this should be Person type - UNIQUE + Required)
2 - Report (Memo - Required)
3 - Status (Choice + Required)
The list will be used to allow the users to submit a weekly report and I don't want to include the title because there is no use to me, I know I can hide the column by customizing the list but this sounds very amateur even for a newbie like me (yeah... sounds
so cheap!), since I've been reading a lot about custom content types and I still didn't get the chance to use this properly I was wondering how I could put them to use and I guess the example here would be the best right?
I really spent some time trying but I always end getting the Title even when I try to use custom content types so I'm really giving up and asking for some help at this point.
Thanks a lot for the help!!!Yes, you can do that. If you need a different content type with your custom fields. Following are the steps : http://www.dotnetcurry.com/ShowArticle.aspx?ID=620
After creating your custom Content Type, Click on the 'Title' filed in your custom content type.
In the 'Column Settings' make it 'Hidden (Will not appear in forms)' and click ok.
Now add this content type to your list/library.
In the list/Library go to setting and 'Advance settings' and make the 'Allow management of Content Type?' as 'yes' and click ok.
Now make default content type not visible from 'Change new button order and default content type' link in the settings page of list/library, and your contet type as 'Default'.
Create a new view, remove the 'Title' field and make that view as 'dafault' view, you can delete the 'All Items' view also if required.
Now whenever user come to that list/Library they will not see the title column and also will not appear in the 'New Item'.
Note : The 'Title' field is mandatory in all the list/library and by default added to the 'All Item' view. So, by doing above steps you are creating a new content type where 'Title' is not mandatory and also not added in default view.
get2pallav
Please click "Propose As Answer" if this post solves your problem or "Vote As Helpful" if this post has been useful to you. -
How to create multiple tabs of report in 1 crystal report file
Hi,
Is there any feature in Crystal report 2008 on creating multiple tabs of report similar to Web-I?
If there is, could you give me help on this.
Thank you in advance.
RoseHi Rose,
I think we cant achive the same functionality in Crystal Report designer.
Regards,
Shweta -
How do I create an email list sign up form for my iWeb website?
Well that's the question - how do I create an email list sign up form for my iWeb website?
Could someone tell me what's the simplest way using iWeb to create an interactive option
for users to enter their email address and the info be forwarded to me so I can add to an
email list?
It would be great if, since I'm using a Mac computer & iWeb, there was a way to have the
submitted emails automatically added to a group in my Mac Addressbook.
I got this MacBook Pro in Sept 2010 so I believe that's iWeb '08 I'm using.
Anyway I'm thinking there should be a way to do this with some system involving an HTMK
Widget and an email account.
By the way this is for hosting through a 'real server', not MobileMe (which I plan to get later
when I can afford it).
Any help or suggestions would be appreciated.
MarkWebsite forms require some code in a snippet and a formmail.php script on the server to process the form and send the info to the required email address. You can do all this when you switch to a "real" server.
In the meantime you can use a form or marketing service or, better still, an application like MailShoot which generates the form, handles the database and sends out the bulk emails.
"I may receive some form of compensation, financial or otherwise, from my recommendation or link." -
How do you create a mailing list on an ipod?
I will sometimes send an email on my ipod touch 4g to multiple people at the same time. But every time I do it I have to manuelly add in everybody one contact at a time. How can I create a mailing list that I can just select whenever I want to send an email to the same group of people?
By using an app to make a group. The iPod does not support making groups.
https://itunes.apple.com/us/app/id358960275?mt=8
https://itunes.apple.com/us/app/id454171229?mt=8 -
In SharePoint 2010 I created workflows that used the 'Create list Item' Action, which then set the Content Type ID (so I could create documents of various types in a document library).
We just switched to the SharePoint 2013 platform, and now the drop down for Content Type ID is blank in all of the workflows that are still using the SharePoint 2010 platform. Is there any way to create a list item with specific content
type? Even if I could just input a string into that field instead of using this blank drop-down. Please help!Hi Sarah,
According to your description, my understanding is that you cannot create a new list item with a specific content type using SharePoint 2010 Platform Workflow.
I tested the same scenario in my environment, and the Create List Item worked fine with the specific content type.
How did you create the content type?
Please check if the content type is added to the list/library the workflow associated with.
Best regards.
Thanks
Victoria Xia
TechNet Community Support
Maybe you are looking for
-
My husband and I share a new PC. We have different music tastes and each have an iphone. How can we both use our one computer and one itunes program with separate music libraries and separate iphones?
-
Problem in putting the classpath
HI! I have a serious problem! I'm trying to create a connection using the antinav jdbc driver type 3 for WindowsXP and Access 2000. I also have installed JDK1.4.2 version and I use JCreatorLE environment. I followed the instructions of README.text bu
-
How to use external libraries in EP
Hi! I am with dificulties in utilizing an external ".jar" file in a Portal application (JSPDynPage). The ".jar" file is the JSTL 1.0 version. It compiles and is exported correctly (SNDS to Portal), but give me an error at runtime (NullPointerExceptio
-
How is Default Char encoding for WebLogic determined ?
How is the defualt char encoding for a Weblogic server determined? We have two environments each running Weblogic 5.1 sp8 on Solaris 7. One is production,other is for testing. For testing german characters I use a TestGlobal.jsp to read parameters us
-
I have had 8 5th gen Nano's since April. Each time a new one arrives under the warranty I use it once and then it dies. Nothing I do will will revive it and I have tried resetting, draining the battery etc. It syncs fine with Itunes and all software