Creating a table of fields

Hi all, I'm new to Adobe Designer. I need help creating fillable fields in a table. At the moment I'm doing it manually field by field and its really time consuming. Can anyone offer me any help on this? Thanks!
Also I've noticed some bugs in the program. When you copy text (a paragraph with indents, bullets and tabs) from MS Word/Wordpad and paste it in Designer, some of the text will be garbled and other will be invisible. The Adobe tech support was able to replicate the same problem.
Another problem I noticed is when I copy 2 pages of text from notepad and paste it in Designer. The text remains uneditable until you expand the placeholder big enough for to show all the text. This is impossible when you are copying 10 pages of text and pasting into Designer. I don't want to break the text apart as I like it to flow from page to page if I make any changes to it.
I'm also looking for a feature call Autoflow found in PageMaker. Its when a 2 or more text boxes have their contents connected. Textbox1 on page 1, textbox2 on page 2. If I add more text in textbox1, the overflow will be flow down to the top part of textbox2. I hope someone can help me with this.
Any help will be greatly appreciated. Thanks in advance!

>I just found out after speaking to a tech support from Adobe that in order for my customers to email me back the forms they have completed, they will need a full version of acrobat.
I thought that was the one of the major selling features of Acrobat 7, the fact that users of the Reader v7 could submit forms...
I'm still using the trial of Designer 6 while I wait for my manager to give approval on the upgrade to 7 (still on acrobat 5), but back in December I started hearing about how the new version let reader users submit forms and make comments, etc.
tye
ah, I think I see the rub. You want customers to be able to save the form and email it back, not submit online....?

Similar Messages

How to create Check table for Field Maktx

Hi Experts,
I am create one ztable with fields Mandt, Matnr, Maktx, Type1 and Type2 etc.
I need a create a check table for field MAKTX.
If i give material number the its the material description also.
Thanks in Advance,
Purnaneelu.

Hi,
Actually i am create one ZTable with fields Mandt ,matnr, maktx, type1,type2 and type3
Now i am entry the data for matnr,type1,type2 and type3 .
Now i am going to TCode SE16n material is not appears, but the requirement is shows the description also
STOP USING I AM in each and every sentence...and try to correct your english...so that people can understand your problem easily.
Hope this suggestion will help you going forward at the time of posting your question at SDN.
Wram regards,
Abhishek

Creating User Table, User Field ... with Script SQL in C#

Hi every body,
I wonder if we could create a user table, user field ... with script SQL in C#.
Should I use the reference Microsoft.SqlServer.ScriptTask ??
Thank you for your Help

Haifa,
I am not sure where your question is directed. The forum that you have posted your question in is for questions related to the SAP Business One SDK. Are you looking to create new user tables/fields in SAP Business One? If so you can do this either through the SAP Business One SDK interface using Tools > User Defined Fields and/or Tools > User Defined tables.
You can also create metadata objects in Business One programatically using the UserTablesMD and/or UserFields objects.
SAP does not support direct SQL writes to the SAP Business One Db.
HTH,
Eddy

Create Internal table with fields coming as query result of multiple tables

Hi
I want to create internal table with the fileds which come as a result of a select query from multiple tables

My code is something like this. I need the data from various fields of diff tables depending on the excel file. This data is then to be put in a internal table
*& Report Z_EXTC
report z_extc.
type-pools : abap.
parameter: objname(25) type c.
data : idetails type abap_compdescr_tab,
 xdetails type abap_compdescr.
data : ref_table_des type ref to cl_abap_structdescr.
data: p_table type string.
data:l_string type string,
 l_filename(200) type c,
 dy_line type ref to data,
 xfc type lvc_s_fcat,
 ifc type lvc_t_fcat.
types:begin of itab,
 tabname type dd03l-tabname,
 fieldname type dd03l-fieldname,
 end of itab.
types:begin of atab,
 tabname type dd03l-tabname,
 cnt type string,
 end of atab.
field-symbols: <dyn_table> type table,
 <dyn_table1> type standard table,
 <dyn_wa>,
 <dyn_field>.
data: dy_table type ref to data,
 dy_table1 type ref to data.
data: itab1 type itab occurs 0 with header line.
data atab1 type atab occurs 0 with header line.
data frstrec type i value 0.
data lastrec type i value 0.
l_string = ''.
call function 'GUI_UPLOAD'
exporting
 filename = 'C:\excel_files\FIELDS_CC.TXT'
 filetype = 'TXT'
 has_field_separator = 'X' .
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
*Refresh itab1.
loop at itab1.
on change of: itab1-tabname.
 if lastrec = 1.
 move l_string to atab1-cnt.
 move itab1-tabname to atab1-tabname.
 append atab1.
 l_string = ''.
 endif.
 move itab1-tabname to atab1-tabname.
 frstrec = 1.
endon.
if frstrec = 1.
 concatenate l_string itab1-fieldname into l_string separated by
space.
 lastrec = 1.
endif.
*write:/ itab1-tabname,40 itab1-fieldname.
endloop.
move l_string to atab1-cnt.
append atab1.
loop at atab1.
write:/ atab1-tabname,5 atab1-cnt.
endloop.

How to create a unique group field in Qualifier table

Hi,
I am trying to use a qualified table in Product maintable like "Site items".
However I would like to have two non-qual field in that like 'Plant' and 'item#' which should be an unique combination.
I have tried to create a table(X) with the above two fields with display and another table (Y)that uses the table X for lookup (site-item) so as to make it dispaly and unique both. However when i am using this Y table as a lookup for the qualified table(site items) , not able to load data.
Error message:
"Import failed. Unable to find source column index for 'Site Item ID' field"
Another issue also not able to populate data for the qualified flds even if when able to load data without making a group unique field for this qualified table.
In MDM 5.5 sp4. Thanks in advance for any tips.
-reo

Hi Beena,
In the above post of mine I suggested you to use STRING data type.
As you are telling that when creating TABLE MAINTANENCE GENERATOR you are
getting an error saying that " Datatype STRING is not supported ". I tried this, what you said is right.
After your reply I did research on this and I also met my heads,
The conclusion is IT IS NOT POSSIBLE TO GENERATE TABLE MAINTANENCE for the table which is using STRING type. At last I can give you one suggestion, i.e., In the short text of that field write STANDARD TEXT name.So that whenever you want, go to this standard text, but the problem is you have to maintain it manually.
Reward all helpful answers.
Regards,
V.Raghavender.

How to delete a field from a Dynamically created internal table

Hi friends,
I have got a requirement in which, I will be entering the table name and Excel file from seletion-screen.
based on the Table I have entered in the selection-screen I need to create a dynamic internal table so that I can fill that Execel data into that internal table and later i using BDC i can I can fill the database table using SM30 transaction.
here. my problem is that, When I am creating internal table dynamically, MANDT filed is also getting created in the internal table.
please, help in deleteing the filed MANDT from the internal able.
following is the code which creates the dynamic internal table.
CREATE DATA dy_table TYPE TABLE OF (p_tabname).
assign dy_table->* to <dyn_table>.
please provide, if any sample code is available.
Regards,
Xavier.P

Hi,
You can use this logic,
While creating the Dynamic filed catalog try to avoid MANDT field.
Ex:
*Dynamic creation of a structure
CREATE DATA LP_STRUCT TYPE (V_TABLE).
ASSIGN LP_STRUCT->* TO <FS>.
*Fields Structure
OF_SDESCR ?= CL_ABAP_TYPEDESCR=>DESCRIBE_BY_DATA( <FS> ).
LOOP AT OF_SDESCR->COMPONENTS ASSIGNING <COMPONENTS>.
*Field MANDT not displayed
 IF SY-TABIX = 1 AND <COMPONENTS>-NAME = 'MANDT'.
 CONTINUE. " Next loop
 ENDIF.
*Build Fieldcatalog
 LS_LVC_CAT-FIELDNAME = <COMPONENTS>-NAME.
 LS_LVC_CAT-REF_TABLE = V_TABLE.
 APPEND LS_LVC_CAT TO LT_LVC_CAT.
 CLEAR LS_LVC_CAT.
ENDLOOP.

Field is missing in Create condition table screen

We are going through one minor issue.We are trying to configure output types for billing docs.I am trying to create a condition table with sold to party field.It is displaying in field catalog,but not displaying in create condition table screen.Any idea how to get it?
Thanks

Hi VCS
As you want to create a condition table at billing level and at billing level for sold to party it is KUNAG where as in sales order level it is KUNNR.
VBRK- KUNAG (SOLD TO PARTY AT BILLING LEVEL )
VBAK- KUNNR (SOLD TO PARTY AT SALES ORDER LEVEL )
so you need to select the sold to party KUNAG and if that sold to party is not available , create that sold to party feild (KUNAG) . and save it
Now when you cerate a condtion table check wheather that cerated feild is there are not . sometimes it will be there and sometimes it wont be there . if that feild is not there then , we need to take the help of ABAPer's and they will copy the standard table into Z table and in that they will write the ALV report or any program . so that it gets triggered in that feild catlog.
example :
KUNAG is availabe in VBRK table
so ABAP'ers will be copying hte standard VBRK table in ZVBRK table and in that ZVBRK table they will write the program where this feild KUNAG is also inserted.
so when you create a condtion table then you can see this KUNAG feild, in the list of feild catlog,if that feild is not there just maintain . the feild. automatically it gets triggered in the feild catlog
Reward if useful
Regards
Srinath

Properties of an answer field allowing form users to create a table

When using Acrobat XI, is it possible to set the properties of the answer field to allow users to put in a table as an answer?

Create the table in aanother program Such as word then save. Then fill in the table items.
Check this out: http://www.screencast.com/t/FxCNROO5AQj

How can we create a table with more than 64 fields in the default DB?

Dear sirs,
I am taking part in the process of migrating a J2ee application from JBoss to SAP Server. I have imported the ejb project.
I have an entity bean with 79 CMP fields. i have created the bean and created the table for the same also. but when i tried to build the dictionary, i am getting an error message as given below,
"Dictionary Generation: DB2:checkNumberOfColumns (primary key of table IMP_MANDANT): number of columns (79) greater than allowed maximum (64) IMP_MANDANT.dtdbtable MyAtlasDictionary/src/packages"
Is it mean that we can not create tables with fields more than 64?
How can i create tables with more than 64 fields?
Kindly help,
Thankyou,
Sudheesh...

Hi,
I found a link in the help site which says its 1024 (without key 1023).
http://help.sap.com/saphelp_nw04s/helpdata/en/f6/069940ccd42a54e10000000a1550b0/content.htm
Not sure about any limit of 64 columns.
Regards,
S.Divakar

Not able to create a table with more than 64 fields in dictionary

Hi,
I have created a java dictionary in Netweaver Developer studio. I have to create a table with more than 64 fields in it. I was able to create the table in dictionary, but when i tried to build it, I am getting an error message as "more than 64 fields are not allowed". If i create the table with 64 fields or below 64 fields, i can build the dictionary and deploy it.
That is, when i create a table with more than 64 fieds, I am not able to compile the dictionary, But if i reduce the fields to 64 or below, i can compile the dictionary.
Kindly help me to solve the problem.
Regards,
Sudheesh

Hi,
Sudheesh,as far as I am aware creating of fields in the table actually depends on the total width of table that can be used for various Vendors.
So I actually tried out creating a table with too many fields,and I am reproducing the errors which I have obtained -
Error Dictionary Generation: DB2:checkWidth TMP_1: total width of table (198198 bytes) greater than allowed maximum (32696 bytes) TMP_1.dtdbtable TestDictionary/src/packages
Error Dictionary Generation: DB4:Table TMP_1: fixed length: 198366 (32767). TMP_1.dtdbtable TestDictionary/src/packages
Error Dictionary Generation: DB6:checkWidth TMP_1: total width of table (297200) including row overhead is greater than the allowed maximum for 16K tablespaces . TMP_1.dtdbtable TestDictionary/src/packages
Error Dictionary Generation: MSSQL:checkWidth TMP_1: total width(198215) greater than allowed maximum (8060) TMP_1.dtdbtable TestDictionary/src/packages
Error Dictionary Generation: SAPDB:checkWidth TMP_1: total width(198297) greater than allowed maximum (8088) TMP_1.dtdbtable TestDictionary/src/packages
Error Dictionary Generation: Table TMP_1 is not generated TMP_1.dtdbtable TestDictionary/src/packages 
I hope you can understand what the errors state.I am trying to create a table whose total width(sum of width all columns) is greater than the maximum allowed for various Vendors,such as DB2,MSSQL,SAPDB etc.
I hope this answer helps you create your table suitably
Regards,
Harish
(Please award points if this answer has been usefull)

Can we create a table field with more than 1200 char length

Hi,
As per business requirement, need to create new table - and one of the field should contain 1200 char length. i found the sap data element but when i was activating it was throwing an error.. is there any alternative for this.
Thanks in advance.

hi jayasri,
Can you use datatype as LCHR for the character string.
before creating the string you need to decalre one INTEGER field.
you can refer to the table EDID4 where SDATA field declared.
check for the data type EDI_SDATA.
Hope this will solve your problem.
Regards,
Madhavi

Add fields in fieldctlg in Create condition table in SPRO

Hi Experts,
How can we add more fields in fieldCatlg table which appears in 'Create Condition Table' in Sales Distribution head in SPRO.
Please Suggest.
Rajiv Ranjan

Hi Rajiv
Please go through this extract from documentation:
Creating New Data Fields in a Communication Structure
Data fields are created in the Data Dictionary. You create data elements and fields in the Data Dictionary as well as integrate them in the relevant structures. Use following check list when you create new data fields:
1. Check whether an identical data field already exists in the standard system
If you want to use the order reason (AUGRU) for pricing, for example,
the data element already exists.
If you want to use parts of the product hierarchy, for example, you must create a new data element (e.g. ZZPRODH1).
Remember that new data fields must begin with the letter "ZZ" or "YY" because SAP has selected this name convention to protect modifications of the customer during a release changeover. Create a new domain for the new data element.
If you want to use a new partner function, such as a selling agent (Z1) you have to create a new partner function (Z1) and a new data element (ZZVRTZ1) in Customizing.
2. Using the source tables, check wether the field is used at header or at item level, which determines the structure in which the field is included. The source tables are listed in the section "Supplying Fields Within the Communication Structure and Using Them in Condition Tables" below.
The order reason, for example, is included in table VBAK, the product hierarchy in table VBAP.
3. Integrate the field in the appropriate communication structure by means of an INCLUDE.
For pricing, for example, you include header fields in KOMKAZ, item fields in KOMPAZ: For the field name enter the field description new fields and make sure that they begin with ZZ or YY. For example, enter ZZAUGRU, ZZPRODH, and ZZVRTZ1 and assign them to the SAP data element AUGRU, or the new data elements you have just created ZZPRODH1 and ZZVRTZ1.
The description of the individual functions will inform you about the structures into which the fields must be integrated.
4. Activate the structure.
5. Include a new field in table T681 and allocate it to the application in which is to be used.
Example
A new field for pricing, has the allocation A, V, 001.
When you have succesfully added the new fields in the communication structure, you will be able to find the same in FIELD CATALOG under the acess squences definition. Please check the same...
Regards
Eswar

Create search helps for fields of custom tables

Hi,
Could any one please provide me the step by step process to create search helps for fields in custom tables?
Thanks in advance,
Nobin.

Hello Nobin
There is basically no difference between a search help for standard vs. customer tables.
An important choise is the selection method for your search help:
Either you use your custom table, a view or a search help user-exit if you need to implement very specific requirements.
Assuming that you can use your DB table as selection method the further implementation of the search help is quite straightforward:
(1) Define the parameters you would like to have a selection criteria (SPos = SPos) and which should appear on the result list (= LPos).
(2) Define the parameters that can be used as input for the selection (flag IMP) and are returned by the search help (flag EXP)
Regards
Uwe

I am creating a request for proposal form and I need to add a commission structure field. I created a table using the ranking field and now I need to delete the "dots/buttons" and turn them into text fields, is this possible?

I created a table using the ranking field and now I need to delete the "dots/buttons" and turn them into text fields, is this possible?

It sounds like what you are trying to do is edit the choices in a likert field to something other than the default radio button. This is not something that you can do in Formscentral at this time.
Andrew

Creating an auto incrementing field with CREATE TABLE from Java

I'm using the "sun.jdbc.odbc.JdbcOdbcDriver" to get a connection towards an ODBC data source that's linked to a Access (.mdb) database.
I've tried various combinations in my CREATE TABLE statement execution in order to create a table with an auto incrementing integer but neither of them work, not even the most obvious one:
stmt.executeUpdate("CREATE TABLE mytable(uid integer AUTO_INCREMENT PRIMARY KEY);");
I always get this runtime exception: *java.sql.SQLException: [Microsoft][ODBC Microsoft Access Driver] Syntax error in field definition*; and AUTO_INCREMENT is the problem. I've tried all variations like AUTO, INCREMENT, AUTOINCREMENT and such, but nothing works.
I've looked everywhere but couldn't find an answer to this. Thanks for the help.

You used MySQL syntax. I think you agree with me that Access isn't a MySQL database. Either use MySQL with a real JDBC driver (recommended) or use Access syntax.
That said, creating databases and tables using Java is a bad idea. The database and table must be already there. With Java you just do the usual table operations like select, insert, update and delete. Nothing more is needed.

Creating a table of fields

Similar Messages

Maybe you are looking for