Creating a WSDL from a perfectly working Logical DS in ALDSP 3.2

i am just running to a small issue, i have a created a group of logical Data services. each having its own functionality. it is tested several times and is in fine working condition.
i have to create a WSDL from this. these were the steps i followed.
1. Went to new, clicked on web Service Map.
2. Named it ABC. I then dragged and dropped my logical DS.
3. when i say "test web service" , the following error throws up.
http://localhost:7051/BSOM/WebService/BSOM_R3.ws?WSDL
failed due to weblogic.testclient.WsdlParseFailedException: Not Found
4. When the link is copied and pasted in Internet Explorer, it shows :
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found

The original problem occurs when there is an <annotation> preceding an <import> or <include>. Moving the <annotations> after the <import> and <include> solves the problem.

Similar Messages

How to Create Abstract WSDL from Concrete WSD

Hello Everyone,
I want to create abstract wsdl from concrete wsdl and place that abstract wsdl in the MDS Location. Now, In the composite i would be configuring the reference section where for ui:wsdlLocation value, i need to give the path of abstract wsdl in mds location. binding.ws location would be the actual concrete wsdl...So basically, all iwant to achieve is lets say CompositeA is calling CompositeB. I want to create abstract WSDL for CompositeB and keep that Abstract WSDL in MDS location, and use that ABstract WSDL which is in MDS location while configuring the Web Service Adapter in Composite A.
can anyone help me on this ,
Thanks in advance

Here is my concrete WSDL...
<wsdl:definitions name="BPELProcess3" targetNamespace="http://xmlns.oracle.com/Test_jws/simpleResponse/BPELProcess3">
<wsdl:documentation>
<abstractWSDL>http://192.168.1.106:8001/soa-infra/services/Enterprise/simpleResponse!1.0/BPELProcess3.wsdl</abstractWSDL>
</wsdl:documentation>
<plnk:partnerLinkType name="BPELProcess3">
<plnk:role name="BPELProcess3Provider">
<plnk:portType name="client:BPELProcess3"/>
</plnk:role>
</plnk:partnerLinkType>
<wsdl:types>
<schema>
<import namespace="http://xmlns.oracle.com/Test_jws/simpleResponse/BPELProcess3" schemaLocation="http://192.168.1.106:8001/soa-infra/services/Enterprise/simpleResponse/bpelprocess3_client_ep?XSD=xsd/BPELProcess3.xsd"/>
</schema>
</wsdl:types>
<wsdl:message name="BPELProcess3RequestMessage">
<wsdl:part name="payload" element="client:process"/>
</wsdl:message>
<wsdl:message name="BPELProcess3ResponseMessage">
<wsdl:part name="payload" element="client:processResponse"/>
</wsdl:message>
<wsdl:portType name="BPELProcess3">
<wsdl:operation name="process">
<wsdl:input message="client:BPELProcess3RequestMessage"/>
<wsdl:output message="client:BPELProcess3ResponseMessage"/>
</wsdl:operation>
</wsdl:portType>
<wsdl:binding name="BPELProcess3Binding" type="client:BPELProcess3">
<soap:binding transport="http://schemas.xmlsoap.org/soap/http"/>
<wsdl:operation name="process">
<soap:operation style="document" soapAction="process"/>
<wsdl:input>
<soap:body use="literal" namespace="http://xmlns.oracle.com/Test_jws/simpleResponse/BPELProcess3"/>
</wsdl:input>
<wsdl:output>
<soap:body use="literal" namespace="http://xmlns.oracle.com/Test_jws/simpleResponse/BPELProcess3"/>
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
<wsdl:service name="bpelprocess3_client_ep">
<wsdl:port name="BPELProcess3_pt" binding="client:BPELProcess3Binding">
<soap:address location="http://192.168.1.106:8001/soa-infra/services/Enterprise/simpleResponse/bpelprocess3_client_ep"/>
</wsdl:port>
</wsdl:service>
</wsdl:definitions>
So in order to create the abstract wsdl, i just need to remove the bindings tab from this one ? please let me on this,
Thanks.

Creating wsdl from a bapi

I need to create a wsdl from a bapi. I would appreciate any reference materials on this topic. As an example, I need to create a wsdl for business object sales order and my wsdl should include create, change, and display. We are on ECC 6.0. When I go to a bapi, under tools, I don't see the option to create wsdl. Suitable points will surely be awarded.

hi bob,
see this url http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=2759462&SiteID=1
http://www.ibm.com/developerworks/websphere/techjournal/0306_minocha/minocha.html
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=2701942&SiteID=1
http://209.85.175.104/search?q=cache:PHil-5GGI88J:www.oracle.com/technology/products/integration/adapters/pdf/adapter-Tutorial3-InvokingSAPBAPI.pdfcreateawsdlfromabapi&hl=en&ct=clnk&cd=5
thanks
karthik
reward me if useful

Problem with generating WSDL from ABAP

Hi all
I have encountered a problem.I created a WSDL from a ABAP program,but in the ABAP function module what it does is it inserts value onto a transparent table from a table which let me specify as a virtual table.So after generating the wsdl i am surprised to see the virtual table has come in the output part .I am unable to make out why this happened.
i am mentioning below the ABAP code which inserts value on to a transparent table from a virtual table
Code-Function module-smlg_modify
<u>virtual table Definition</u>
"table with items for insertion
DATA INS_TAB LIKE RZLLITAB OCCURS 0 WITH HEADER LINE.
DESCRIBE TABLE MODIFICATIONS LINES ITEMS.
LOOP AT MODIFICATIONS.
    MODIFICATIONS-GROUPTYPE = GROUPTYPE.
    CASE MODIFICATIONS-MODIFICATN.
      WHEN 'I'. "insertion of an item
        INS_TAB = MODIFICATIONS.
        APPEND INS_TAB.
END LOOP
DESCRIBE TABLE INS_TAB LINES ITEMS.
IF ITEMS > 0.
    INSERT RZLLITAB FROM TABLE INS_TAB-->(one i mentioned as virtual.)
ENDIF.
In such a case how comes the virtual comes as the output in wsdl
I am mentioning below the the wsdl
<----
>
<?xml version="1.0" encoding="ASCII"?>
<wsdl:definitions xmlns:ctc="http://sap.com/ctc" xmlns:ctc-bapi="http://www.sap.com/ctc/abapprovider" xmlns:ctc_ref="urn:example/encoded" xmlns:ctclib="http://sap.com/ctc/schema/lib" xmlns:plnk="http://schema.xmlsoap.org/ws/2003/05/partner-link" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:tns="http://sap.com/ctc/services" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" name="SMLG_MODIFYServiceDefinition" targetNamespace="http://sap.com/ctc/services">
<wsdl:types>
<xsd:schema xmlns:tns="http://sap.com/ctc/services" xmlns:xsd="http://www.w3.org/2001/XMLSchema" targetNamespace="http://sap.com/ctc/services">
<xsd:element name="GROUPTYPE" type="xsd:string"/>
<xsd:element name="SET_LOCK" type="xsd:string"/>
<xsd:complexType name="ERFC_MODIFICATIONS">
<xsd:sequence>
<xsd:element name="CLASSNUM" type="xsd:int"/>
<xsd:element name="CLASSNAME" type="xsd:string"/>
<xsd:element name="GROUPTYPE" type="xsd:string"/>
<xsd:element name="TIMERERD" type="xsd:int"/>
<xsd:element name="LOGRERD" type="xsd:int"/>
<xsd:element name="FAVTYPE" type="xsd:string"/>
<xsd:element name="MODIFICATN" type="xsd:string"/>
</xsd:sequence>
</xsd:complexType>
<xsd:element name="ERFC_MODIFICATIONS" type="tns:ERFC_MODIFICATIONS"/>
<xsd:element name="CLASSNUM" type="xsd:int"/>
<xsd:element name="CLASSNAME" type="xsd:string"/>
<xsd:element name="GROUPTYPE" type="xsd:string"/>
<xsd:element name="TIMERERD" type="xsd:int"/>
<xsd:element name="LOGRERD" type="xsd:int"/>
<xsd:element name="FAVTYPE" type="xsd:string"/>
<xsd:element name="MODIFICATN" type="xsd:string"/>
</xsd:schema>
</wsdl:types>
<wsdl:message name="SMLG_MODIFYInput">
    <wsdl:part name="GROUPTYPE" type="xsd:string"/>
    <wsdl:part name="SET_LOCK" type="xsd:string"/>
</wsdl:message>
<wsdl:message name="SMLG_MODIFYOutput">
    <wsdl:part name="ERFC_MODIFICATIONS" type="tns:ERFC_MODIFICATIONS"/>
    <wsdl:part name="CLASSNUM" type="xsd:int"/>
    <wsdl:part name="CLASSNAME" type="xsd:string"/>
    <wsdl:part name="GROUPTYPE" type="xsd:string"/>
    <wsdl:part name="TIMERERD" type="xsd:int"/>
    <wsdl:part name="LOGRERD" type="xsd:int"/>
    <wsdl:part name="FAVTYPE" type="xsd:string"/>
    <wsdl:part name="MODIFICATN" type="xsd:string"/>
</wsdl:message>
<wsdl:portType name="SMLG_MODIFYPT">
    <wsdl:operation name="SMLG_MODIFYOperation">
      <wsdl:input message="SMLG_MODIFYInput"/>
      <wsdl:output message="SMLG_MODIFYOutput"/>
      <wsdl:fault message="ctclib:BAPIException" name="BAPIException"/>
    </wsdl:operation>
</wsdl:portType>
<wsdl:binding name="SMLG_MODIFYBinding" type="SMLG_MODIFYPT">
    <ctc:binding transport="com.sap.mw.jco"/>
    <wsdl:operation name="SMLG_MODIFYOperation">
      <ctc-bapi:function name="SMLG_MODIFY"/>
      <wsdl:input>
        <ctc:body encodingStyle="ctc:SCHEMA2ABAP">
          <ctc-bapi:partbinding name="GROUPTYPE">
            <field elementname="GROUPTYPE">
              <name>GROUPTYPE</name>
              <type>CHAR</type>
            </field>
          </ctc-bapi:partbinding>
          <ctc-bapi:partbinding name="SET_LOCK">
            <field elementname="SET_LOCK">
              <name>SET_LOCK</name>
              <type>CHAR</type>
            </field>
          </ctc-bapi:partbinding>
        </ctc:body>
      </wsdl:input>
      <wsdl:output>
        <ctc:body encodingStyle="ctc:SCHEMA2ABAP">
          <ctc-bapi:partbinding name="ERFC_MODIFICATIONS">
            <table elementname="ERFC_MODIFICATIONS" jcoName="ERFC_MODIFICATIONS">
              <structure elementname="RZLLIMODGP" jcotype="RZLLIMODGP">
                <field elementname="CLASSNUM">
                  <name>CLASSNUM</name>
                  <type>NUMC</type>
                </field>
                <field elementname="CLASSNAME">
                  <name>CLASSNAME</name>
                  <type>CHAR</type>
                </field>
                <field elementname="GROUPTYPE">
                  <name>GROUPTYPE</name>
                  <type>CHAR</type>
                </field>
                <field elementname="TIMERERD">
                  <name>TIMERERD</name>
                  <type>NUMC</type>
                </field>
                <field elementname="LOGRERD">
                  <name>LOGRERD</name>
                  <type>NUMC</type>
                </field>
                <field elementname="FAVTYPE">
                  <name>FAVTYPE</name>
                  <type>CHAR</type>
                </field>
                <field elementname="MODIFICATN">
                  <name>MODIFICATN</name>
                  <type>CHAR</type>
                </field>
              </structure>
            </table>
          </ctc-bapi:partbinding>
          <ctc-bapi:partbinding name="CLASSNUM">
            <field elementname="CLASSNUM">
              <name>CLASSNUM</name>
              <type>NUMC</type>
            </field>
          </ctc-bapi:partbinding>
          <ctc-bapi:partbinding name="CLASSNAME">
            <field elementname="CLASSNAME">
              <name>CLASSNAME</name>
              <type>CHAR</type>
            </field>
          </ctc-bapi:partbinding>
          <ctc-bapi:partbinding name="GROUPTYPE">
            <field elementname="GROUPTYPE">
              <name>GROUPTYPE</name>
              <type>CHAR</type>
            </field>
          </ctc-bapi:partbinding>
          <ctc-bapi:partbinding name="TIMERERD">
            <field elementname="TIMERERD">
              <name>TIMERERD</name>
              <type>NUMC</type>
            </field>
          </ctc-bapi:partbinding>
          <ctc-bapi:partbinding name="LOGRERD">
            <field elementname="LOGRERD">
              <name>LOGRERD</name>
              <type>NUMC</type>
            </field>
          </ctc-bapi:partbinding>
          <ctc-bapi:partbinding name="FAVTYPE">
            <field elementname="FAVTYPE">
              <name>FAVTYPE</name>
              <type>CHAR</type>
            </field>
          </ctc-bapi:partbinding>
          <ctc-bapi:partbinding name="MODIFICATN">
            <field elementname="MODIFICATN">
              <name>MODIFICATN</name>
              <type>CHAR</type>
            </field>
          </ctc-bapi:partbinding>
        </ctc:body>
      </wsdl:output>
    </wsdl:operation>
</wsdl:binding>
<wsdl:service name="SMLG_MODIFYService">
    <wsdl:port binding="SMLG_MODIFYBinding" name="SMLG_MODIFYServicePort"/>
</wsdl:service>
</wsdl:definitions>
>
My purpose is to create a .cproc file which will pass values to this wsdl file.I dont know how to pass as the table which the function module accepts as input is output in wsdl.so i am not aware how to pass value.Kindly help me out how to create a .cproc file for it
Thanks
Neeta

Hello Anton,
where on the abap-server I can find the generated wsdl?
I have downloaded the wsdl to eclipse 3.3 and can call the webserrvice successfull.
But when I try o call the webservice with <netweaver-server>/wsnavigator, I can input the data-fields, but the request answer is that the web-service is not found on the given domain.
So I want manipulate the domain in the wsdl.
Best regards
Oliver Prodinger

Problem while genearting WSDL from ABAP

Hi all
I have encountered a problem.I created a WSDL from a ABAP program,but in the ABAP function module what it does is it inserts value onto a transparent table from a table which let me specify as a virtual table.So after generating the wsdl i am surprised to see the virtual table has come in the output part .I am unable to make out why this happened.
i am mentioning below the ABAP code which inserts value on to a transparent table from a virtual table
Code-Function module-smlg_modify
<u>virtual table Definition</u>
"table with items for insertion
DATA INS_TAB LIKE RZLLITAB OCCURS 0 WITH HEADER LINE.
DESCRIBE TABLE MODIFICATIONS LINES ITEMS.
LOOP AT MODIFICATIONS.
    MODIFICATIONS-GROUPTYPE = GROUPTYPE.
    CASE MODIFICATIONS-MODIFICATN.
      WHEN 'I'. "insertion of an item
        INS_TAB = MODIFICATIONS.
        APPEND INS_TAB.
END LOOP
DESCRIBE TABLE INS_TAB LINES ITEMS.
IF ITEMS > 0.
    INSERT RZLLITAB FROM TABLE INS_TAB-->(one i mentioned as virtual.)
ENDIF.
In such a case how comes the virtual comes as the output in wsdl
I am mentioning below the the wsdl
<----
>
<?xml version="1.0" encoding="ASCII"?>
<wsdl:definitions xmlns:ctc="http://sap.com/ctc" xmlns:ctc-bapi="http://www.sap.com/ctc/abapprovider" xmlns:ctc_ref="urn:example/encoded" xmlns:ctclib="http://sap.com/ctc/schema/lib" xmlns:plnk="http://schema.xmlsoap.org/ws/2003/05/partner-link" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:tns="http://sap.com/ctc/services" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" name="SMLG_MODIFYServiceDefinition" targetNamespace="http://sap.com/ctc/services">
<wsdl:types>
<xsd:schema xmlns:tns="http://sap.com/ctc/services" xmlns:xsd="http://www.w3.org/2001/XMLSchema" targetNamespace="http://sap.com/ctc/services">
<xsd:element name="GROUPTYPE" type="xsd:string"/>
<xsd:element name="SET_LOCK" type="xsd:string"/>
<xsd:complexType name="ERFC_MODIFICATIONS">
<xsd:sequence>
<xsd:element name="CLASSNUM" type="xsd:int"/>
<xsd:element name="CLASSNAME" type="xsd:string"/>
<xsd:element name="GROUPTYPE" type="xsd:string"/>
<xsd:element name="TIMERERD" type="xsd:int"/>
<xsd:element name="LOGRERD" type="xsd:int"/>
<xsd:element name="FAVTYPE" type="xsd:string"/>
<xsd:element name="MODIFICATN" type="xsd:string"/>
</xsd:sequence>
</xsd:complexType>
<xsd:element name="ERFC_MODIFICATIONS" type="tns:ERFC_MODIFICATIONS"/>
<xsd:element name="CLASSNUM" type="xsd:int"/>
<xsd:element name="CLASSNAME" type="xsd:string"/>
<xsd:element name="GROUPTYPE" type="xsd:string"/>
<xsd:element name="TIMERERD" type="xsd:int"/>
<xsd:element name="LOGRERD" type="xsd:int"/>
<xsd:element name="FAVTYPE" type="xsd:string"/>
<xsd:element name="MODIFICATN" type="xsd:string"/>
</xsd:schema>
</wsdl:types>
<wsdl:message name="SMLG_MODIFYInput">
    <wsdl:part name="GROUPTYPE" type="xsd:string"/>
    <wsdl:part name="SET_LOCK" type="xsd:string"/>
</wsdl:message>
<wsdl:message name="SMLG_MODIFYOutput">
    <wsdl:part name="ERFC_MODIFICATIONS" type="tns:ERFC_MODIFICATIONS"/>
    <wsdl:part name="CLASSNUM" type="xsd:int"/>
    <wsdl:part name="CLASSNAME" type="xsd:string"/>
    <wsdl:part name="GROUPTYPE" type="xsd:string"/>
    <wsdl:part name="TIMERERD" type="xsd:int"/>
    <wsdl:part name="LOGRERD" type="xsd:int"/>
    <wsdl:part name="FAVTYPE" type="xsd:string"/>
    <wsdl:part name="MODIFICATN" type="xsd:string"/>
</wsdl:message>
<wsdl:portType name="SMLG_MODIFYPT">
    <wsdl:operation name="SMLG_MODIFYOperation">
      <wsdl:input message="SMLG_MODIFYInput"/>
      <wsdl:output message="SMLG_MODIFYOutput"/>
      <wsdl:fault message="ctclib:BAPIException" name="BAPIException"/>
    </wsdl:operation>
</wsdl:portType>
<wsdl:binding name="SMLG_MODIFYBinding" type="SMLG_MODIFYPT">
    <ctc:binding transport="com.sap.mw.jco"/>
    <wsdl:operation name="SMLG_MODIFYOperation">
      <ctc-bapi:function name="SMLG_MODIFY"/>
      <wsdl:input>
        <ctc:body encodingStyle="ctc:SCHEMA2ABAP">
          <ctc-bapi:partbinding name="GROUPTYPE">
            <field elementname="GROUPTYPE">
              <name>GROUPTYPE</name>
              <type>CHAR</type>
            </field>
          </ctc-bapi:partbinding>
          <ctc-bapi:partbinding name="SET_LOCK">
            <field elementname="SET_LOCK">
              <name>SET_LOCK</name>
              <type>CHAR</type>
            </field>
          </ctc-bapi:partbinding>
        </ctc:body>
      </wsdl:input>
      <wsdl:output>
        <ctc:body encodingStyle="ctc:SCHEMA2ABAP">
          <ctc-bapi:partbinding name="ERFC_MODIFICATIONS">
            <table elementname="ERFC_MODIFICATIONS" jcoName="ERFC_MODIFICATIONS">
              <structure elementname="RZLLIMODGP" jcotype="RZLLIMODGP">
                <field elementname="CLASSNUM">
                  <name>CLASSNUM</name>
                  <type>NUMC</type>
                </field>
                <field elementname="CLASSNAME">
                  <name>CLASSNAME</name>
                  <type>CHAR</type>
                </field>
                <field elementname="GROUPTYPE">
                  <name>GROUPTYPE</name>
                  <type>CHAR</type>
                </field>
                <field elementname="TIMERERD">
                  <name>TIMERERD</name>
                  <type>NUMC</type>
                </field>
                <field elementname="LOGRERD">
                  <name>LOGRERD</name>
                  <type>NUMC</type>
                </field>
                <field elementname="FAVTYPE">
                  <name>FAVTYPE</name>
                  <type>CHAR</type>
                </field>
                <field elementname="MODIFICATN">
                  <name>MODIFICATN</name>
                  <type>CHAR</type>
                </field>
              </structure>
            </table>
          </ctc-bapi:partbinding>
          <ctc-bapi:partbinding name="CLASSNUM">
            <field elementname="CLASSNUM">
              <name>CLASSNUM</name>
              <type>NUMC</type>
            </field>
          </ctc-bapi:partbinding>
          <ctc-bapi:partbinding name="CLASSNAME">
            <field elementname="CLASSNAME">
              <name>CLASSNAME</name>
              <type>CHAR</type>
            </field>
          </ctc-bapi:partbinding>
          <ctc-bapi:partbinding name="GROUPTYPE">
            <field elementname="GROUPTYPE">
              <name>GROUPTYPE</name>
              <type>CHAR</type>
            </field>
          </ctc-bapi:partbinding>
          <ctc-bapi:partbinding name="TIMERERD">
            <field elementname="TIMERERD">
              <name>TIMERERD</name>
              <type>NUMC</type>
            </field>
          </ctc-bapi:partbinding>
          <ctc-bapi:partbinding name="LOGRERD">
            <field elementname="LOGRERD">
              <name>LOGRERD</name>
              <type>NUMC</type>
            </field>
          </ctc-bapi:partbinding>
          <ctc-bapi:partbinding name="FAVTYPE">
            <field elementname="FAVTYPE">
              <name>FAVTYPE</name>
              <type>CHAR</type>
            </field>
          </ctc-bapi:partbinding>
          <ctc-bapi:partbinding name="MODIFICATN">
            <field elementname="MODIFICATN">
              <name>MODIFICATN</name>
              <type>CHAR</type>
            </field>
          </ctc-bapi:partbinding>
        </ctc:body>
      </wsdl:output>
    </wsdl:operation>
</wsdl:binding>
<wsdl:service name="SMLG_MODIFYService">
    <wsdl:port binding="SMLG_MODIFYBinding" name="SMLG_MODIFYServicePort"/>
</wsdl:service>
</wsdl:definitions>
>
My purpose is to create a .cproc file which will pass values to this wsdl file.I dont know how to pass as the table which the function module accepts as input is output in wsdl.so i am not aware how to pass value.Kindly help me out how to create a .cproc file for it
Thanks
Neeta

It is not finding the correct URL - hence the 404 - page not found error.
Correct the URL and try again.

Problem while craeting WSDL from ABAP

Hi all
I have encountered a problem.I created a WSDL from a ABAP program,but in the ABAP function module what it does is it inserts value onto a transparent table from a table which let me specify as a virtual table.So after generating the wsdl i am surprised to see the virtual table has come in the output part .I am unable to make out why this happened.
i am mentioning below the ABAP code which inserts value on to a transparent table from a virtual table
Code-Function module-smlg_modify
<u>virtual table Definition</u>
"table with items for insertion
DATA INS_TAB LIKE RZLLITAB OCCURS 0 WITH HEADER LINE.
DESCRIBE TABLE MODIFICATIONS LINES ITEMS.
LOOP AT MODIFICATIONS.
    MODIFICATIONS-GROUPTYPE = GROUPTYPE.
    CASE MODIFICATIONS-MODIFICATN.
      WHEN 'I'. "insertion of an item
        INS_TAB = MODIFICATIONS.
        APPEND INS_TAB.
END LOOP
DESCRIBE TABLE INS_TAB LINES ITEMS.
IF ITEMS > 0.
    INSERT RZLLITAB FROM TABLE INS_TAB-->(one i mentioned as virtual.)
ENDIF.
In such a case how comes the virtual comes as the output in wsdl
I am mentioning below the the wsdl
<----
>
<?xml version="1.0" encoding="ASCII"?>
<wsdl:definitions xmlns:ctc="http://sap.com/ctc" xmlns:ctc-bapi="http://www.sap.com/ctc/abapprovider" xmlns:ctc_ref="urn:example/encoded" xmlns:ctclib="http://sap.com/ctc/schema/lib" xmlns:plnk="http://schema.xmlsoap.org/ws/2003/05/partner-link" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:tns="http://sap.com/ctc/services" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" name="SMLG_MODIFYServiceDefinition" targetNamespace="http://sap.com/ctc/services">
<wsdl:types>
<xsd:schema xmlns:tns="http://sap.com/ctc/services" xmlns:xsd="http://www.w3.org/2001/XMLSchema" targetNamespace="http://sap.com/ctc/services">
<xsd:element name="GROUPTYPE" type="xsd:string"/>
<xsd:element name="SET_LOCK" type="xsd:string"/>
<xsd:complexType name="ERFC_MODIFICATIONS">
<xsd:sequence>
<xsd:element name="CLASSNUM" type="xsd:int"/>
<xsd:element name="CLASSNAME" type="xsd:string"/>
<xsd:element name="GROUPTYPE" type="xsd:string"/>
<xsd:element name="TIMERERD" type="xsd:int"/>
<xsd:element name="LOGRERD" type="xsd:int"/>
<xsd:element name="FAVTYPE" type="xsd:string"/>
<xsd:element name="MODIFICATN" type="xsd:string"/>
</xsd:sequence>
</xsd:complexType>
<xsd:element name="ERFC_MODIFICATIONS" type="tns:ERFC_MODIFICATIONS"/>
<xsd:element name="CLASSNUM" type="xsd:int"/>
<xsd:element name="CLASSNAME" type="xsd:string"/>
<xsd:element name="GROUPTYPE" type="xsd:string"/>
<xsd:element name="TIMERERD" type="xsd:int"/>
<xsd:element name="LOGRERD" type="xsd:int"/>
<xsd:element name="FAVTYPE" type="xsd:string"/>
<xsd:element name="MODIFICATN" type="xsd:string"/>
</xsd:schema>
</wsdl:types>
<wsdl:message name="SMLG_MODIFYInput">
    <wsdl:part name="GROUPTYPE" type="xsd:string"/>
    <wsdl:part name="SET_LOCK" type="xsd:string"/>
</wsdl:message>
<wsdl:message name="SMLG_MODIFYOutput">
    <wsdl:part name="ERFC_MODIFICATIONS" type="tns:ERFC_MODIFICATIONS"/>
    <wsdl:part name="CLASSNUM" type="xsd:int"/>
    <wsdl:part name="CLASSNAME" type="xsd:string"/>
    <wsdl:part name="GROUPTYPE" type="xsd:string"/>
    <wsdl:part name="TIMERERD" type="xsd:int"/>
    <wsdl:part name="LOGRERD" type="xsd:int"/>
    <wsdl:part name="FAVTYPE" type="xsd:string"/>
    <wsdl:part name="MODIFICATN" type="xsd:string"/>
</wsdl:message>
<wsdl:portType name="SMLG_MODIFYPT">
    <wsdl:operation name="SMLG_MODIFYOperation">
      <wsdl:input message="SMLG_MODIFYInput"/>
      <wsdl:output message="SMLG_MODIFYOutput"/>
      <wsdl:fault message="ctclib:BAPIException" name="BAPIException"/>
    </wsdl:operation>
</wsdl:portType>
<wsdl:binding name="SMLG_MODIFYBinding" type="SMLG_MODIFYPT">
    <ctc:binding transport="com.sap.mw.jco"/>
    <wsdl:operation name="SMLG_MODIFYOperation">
      <ctc-bapi:function name="SMLG_MODIFY"/>
      <wsdl:input>
        <ctc:body encodingStyle="ctc:SCHEMA2ABAP">
          <ctc-bapi:partbinding name="GROUPTYPE">
            <field elementname="GROUPTYPE">
              <name>GROUPTYPE</name>
              <type>CHAR</type>
            </field>
          </ctc-bapi:partbinding>
          <ctc-bapi:partbinding name="SET_LOCK">
            <field elementname="SET_LOCK">
              <name>SET_LOCK</name>
              <type>CHAR</type>
            </field>
          </ctc-bapi:partbinding>
        </ctc:body>
      </wsdl:input>
      <wsdl:output>
        <ctc:body encodingStyle="ctc:SCHEMA2ABAP">
          <ctc-bapi:partbinding name="ERFC_MODIFICATIONS">
            <table elementname="ERFC_MODIFICATIONS" jcoName="ERFC_MODIFICATIONS">
              <structure elementname="RZLLIMODGP" jcotype="RZLLIMODGP">
                <field elementname="CLASSNUM">
                  <name>CLASSNUM</name>
                  <type>NUMC</type>
                </field>
                <field elementname="CLASSNAME">
                  <name>CLASSNAME</name>
                  <type>CHAR</type>
                </field>
                <field elementname="GROUPTYPE">
                  <name>GROUPTYPE</name>
                  <type>CHAR</type>
                </field>
                <field elementname="TIMERERD">
                  <name>TIMERERD</name>
                  <type>NUMC</type>
                </field>
                <field elementname="LOGRERD">
                  <name>LOGRERD</name>
                  <type>NUMC</type>
                </field>
                <field elementname="FAVTYPE">
                  <name>FAVTYPE</name>
                  <type>CHAR</type>
                </field>
                <field elementname="MODIFICATN">
                  <name>MODIFICATN</name>
                  <type>CHAR</type>
                </field>
              </structure>
            </table>
          </ctc-bapi:partbinding>
          <ctc-bapi:partbinding name="CLASSNUM">
            <field elementname="CLASSNUM">
              <name>CLASSNUM</name>
              <type>NUMC</type>
            </field>
          </ctc-bapi:partbinding>
          <ctc-bapi:partbinding name="CLASSNAME">
            <field elementname="CLASSNAME">
              <name>CLASSNAME</name>
              <type>CHAR</type>
            </field>
          </ctc-bapi:partbinding>
          <ctc-bapi:partbinding name="GROUPTYPE">
            <field elementname="GROUPTYPE">
              <name>GROUPTYPE</name>
              <type>CHAR</type>
            </field>
          </ctc-bapi:partbinding>
          <ctc-bapi:partbinding name="TIMERERD">
            <field elementname="TIMERERD">
              <name>TIMERERD</name>
              <type>NUMC</type>
            </field>
          </ctc-bapi:partbinding>
          <ctc-bapi:partbinding name="LOGRERD">
            <field elementname="LOGRERD">
              <name>LOGRERD</name>
              <type>NUMC</type>
            </field>
          </ctc-bapi:partbinding>
          <ctc-bapi:partbinding name="FAVTYPE">
            <field elementname="FAVTYPE">
              <name>FAVTYPE</name>
              <type>CHAR</type>
            </field>
          </ctc-bapi:partbinding>
          <ctc-bapi:partbinding name="MODIFICATN">
            <field elementname="MODIFICATN">
              <name>MODIFICATN</name>
              <type>CHAR</type>
            </field>
          </ctc-bapi:partbinding>
        </ctc:body>
      </wsdl:output>
    </wsdl:operation>
</wsdl:binding>
<wsdl:service name="SMLG_MODIFYService">
    <wsdl:port binding="SMLG_MODIFYBinding" name="SMLG_MODIFYServicePort"/>
</wsdl:service>
</wsdl:definitions>
>
My purpose is to create a .cproc file which will pass values to this wsdl file.I dont know how to pass as the table which the function module accepts as input is output in wsdl.so i am not aware how to pass value.Kindly help me out how to create a .cproc file for it
Thanks
Neeta

It is not finding the correct URL - hence the 404 - page not found error.
Correct the URL and try again.

JDeveloper 10.1.3.2 - how to create a stub from WSDL?

Hello to all..
I have installet the last version of Jdeveloper.. since this I used JDev 10.1.2...
Can anybody help me how can i make classes (stub) from WSDL?
I have a WSDL file located on remote HTTPS server.. In JDev 10.1.2 i get error when i like to connect on https to retrive data...
But in JDev 10.1.3.2 I can't find a function to create a stub from wsdl..
There is only a option to create a java webservice from wsdl.. (but this will create a new webservice (right?)..
so.. how can I create a stub from remote wsdl..
best regards

Another question...
For retriving information i must install a certificate...
I installed it for mozilla and explorer.. so if i acess to the url i get the wsdl definition
picture 1: http://freeweb.siol.net/peterv6i/picc2.jpg
In JDeveloper i get error DCA-40002
here is the picture: http://freeweb.siol.net/peterv6i/picc1.jpg
how to acess to wsdl if it requires a certificate?

Why can I not create a PDF from a web page on my Adobe Acrobat 8 Pro on my new Windows 8 computer? It worked fine on my windows XP system?

Why can I not create a PDF from a web page on my Adobe Acrobat 8 Pro on my new Windows 8 computer? It worked fine on my windows XP system?

Acrobat 8 is not compatible with Windows 8, for the simple reason it was
created much before it and Adobe could not participate the changes to the
OS that Microsoft implemented many years later on. You need to buy the
current version for compatibility.

Create a PDF from webpage using entire site option doesn't works

OK, guys, this is the problem...
After YEARS of testing from Acrpbat 4 thru 9 on Create a PDF from webpage using entire site option... it doesn't works properly and doesn't got the entire site. ALWAYS get an error of memory or any other error but FINALLY you NEVER got the entire site. I'm talking for a big website... not like amazon.com, but a big one.
I make a walkarround to try to capture the website in parts but Acrobat is not "intelligent" to make a resume capture of the site, because ALWAYS start from the begining instead from the resume position of the site...
My question is, HOW can get the ENTIRE SITE in a PDF document... without getting errors or stopping the capture process...
Don't have problem of low RAM memory because I'm in a MONSTER MACINTOSH.... 3.2 GHZ with 8 Core and 32 GB of RAM under Mac OS X Leopard 10.5.6 in Acrobat 9 Pro.
If I'm not wrong, the GET ENTIRE SITE option in Web Capture (Create a PDF from webpage using entire site option) doesn't works from Acrobat 4 thru 9 in Pro version... tested, you'll never got the entire site... I'm talking in capture a huge entire site and not a little one...
Can someone help me?
Thanks.

Ok so I go to a web page and select something to print. Once I've clicked print I switch over from printer/micosoft xps docu writer/fax and select Adobe PDF. All goes through with a 'Create Adobe PDF' coming up progressing through to eventually save and store. Once I open the file it end up as the picture above. I have the same version on another computer and that works fine but this particular Sony laptop it doesn't seem to work properly.

Created a pdf from a word-file and inserted formfields. The fields works in other pdf-readers(nitro,reader etc), but not in adobe reader and acrobat. Please help.

Hi,
I have created a pdf from a word-file and inserted formfields for a work related file. I've used nitro pro to create the formfield. They works in nitro, reader, foxit etc. but not adobe reader. From page 3 and out, the font wont show when writing in a formfield. Some formfield doesnt even show.
Please help me fix this (hopefully before the presentation at work friday) :-)
File in question: Dropbox - Byggeplassperm_bico_prosjektledelse_2.pdf
Kind regards
Tobias

Agreed. Adobe makes no claims that their Reader will work properly with forms made from third party software.

Create a project from list item not working if EPT has Project Plan Template

HI,
i am trying to leverage the new feature in 2013 to create a project from an idea list.
This works fine if the EPT does not have Project Plan template assigned to it. Even through workflow action "Create Project from current list item".
However if i assign a project plan template and the user creating the project  is not Administrators Group member, i get an error. While doing this trough a workflow the worfklow gets suspended and i have the below message:
RequestorId: 654a6744-eb11-3d9c-0000-000000000000. Details: RequestorId: 654a6744-eb11-3d9c-0000-000000000000. Details: An unhandled exception occurred during the execution of the workflow instance. Exception details: System.ApplicationException: HTTP 403
{"error":{"code":"20010, Microsoft.ProjectServer.PJClientCallableException","message":{"lang":"en-US","value":"PJClientCallableException: GeneralSecurityAccessDenied\u000d\u000aGeneralSecurityAccessDenied"}}}
{"Transfer-Encoding":["chunked"],"X-SharePointHealthScore":["0"],"SPClientServiceRequestDuration":["290"],"SPRequestGuid":["654a6744-eb11-3d9c-9d1e-ff8135e50f19"],"request-id":["654a6744-eb11-3d9c-9d1e-ff8135e50f19"],"X-FRAME-OPTIONS":["SAMEORIGIN"],"MicrosoftSharePointTeamServices":["15.0.0.4535"],"X-Content-Type-Options":["nosniff"],"X-MS-InvokeApp":["1;
RequireReadOnly"],"Cache-Control":["max-age=0, private"],"Date":["Wed, 23 Apr 2014 14:40:46 GMT"],"Server":["Microsoft-IIS\/7.5"],"X-AspNet-Version":["4.0.30319"],"X-Powered-By":["ASP.NET"]}
at Microsoft.Activities.Hosting.Runtime.Subroutine.SubroutineChild.Execute(CodeActivityContext context)   at System.Activities.CodeActivity.InternalExecute(ActivityInstance instance, ActivityExecutor executor, BookmarkManager bookmarkManager)
at System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody(ActivityExecutor executor, BookmarkManager bookmarkManager, Location resultLocation)
Any one has experienced this ?
Thx

Hi, RonyZ.
I think it could help.
I have experienced the same problem as you are, except "Create project" option, my managers could do it.
So, for me a solution was to set definite permissions for Workflow Initiators (I have created new group, but you can edit, including
Global permissions
New project
Open project template
Server configuration management
For category “My organization”
Open Project
Publish Project
Save Project on Project Server
Excuse me my translation, some names can be written not properly, cause I have localized SP.
In you case, I think, you should check, if you PM group has all these permissions.
And Workflow Initiator should be in group which has.
In LOGS error notifications starts with “Permission denied”, then goes account
name and then the name of permission which is left.

Create new document from current state not working

Hey, everyone. I'm using Photoshop CS6 (ccloud) on Windows 7 and I just noticed something weird. Often when I'm working on an image that I want to duplicate, I'll click on the create new document from current state icon at the bottom of the history panel and a new image identical to it will open up as expected.
Lately, though, every once in a while, when I click it, I'll get a new image that's not identical. It'll be a few states behind and I don't know why. It's never happened before and I'm not doing anything differently when it happens. I recently ran the CS6 update via ccloud, but I can't recall now if this started happening right before that or exclusively afterward.
In case my issue's not clear, let's say I create a blank image, add a background color, add a layer of text, add a drop shadow to the text, then mask it. When I click the create new document from current state icon, instead of creating a new image that's a duplicate of that one, it will create new one where all that's there is the background color and text and all the other steps of adding a drop shadow and mask aren't there as if I hadn't done it yet.
I make sure that I'm not clicking anywhere else in the history panel and like I said, this just happens at what seems like random times with random images. I've even tried saving an image, closing it, opening it again and immediately clicking that icon and it'll still create a new document that has missing states.
Any idea what's going on?

Yep, that existed in CS5 as well.
We'll log a bug on it.

How can i create proxy service from wsdl on different domain

i have a demo webservice. it has many operations on proxy service's message flow. How can i create proxy service from demo's wsdl on different domain

Hi fresh man
This is the Oracle Forms forum, and your query has nothing to do with Forms.
Please post on {forum:id=75}.
Please search first. It usually helps to search before you post.
Regards,

How do you create a wsdl file from a FM?

Hello friends,
Could some one please let me know how to create a wsdl file from a function module?
I have gone up to the stage of creating webservice and also released it for SOAP runtime using tranasaction code wsconfig.
But I don't know how to proceed from there and create a wsdl file.
Your help will be greatly appreciated.
Tks
Ram
Edited by: Ram Prasad on Nov 18, 2008 4:44 PM

I was able to solve the issue with a friends help. Here are the steps
STEPS in CREATING WSDL file from a FM:
1.Goto SE80 Create a package or select a package in which you want to create a web service.
2.Right click and select Create -> Enterprise Serve/Web Service -> Web Service
3.Follow the wizard steps answering all the questions until complete. This creates the service definition.
4.Goto transaction code <WSCONFIG> and enter the service definition name you have created in previous step. Enter the same name in both u2018service definitionu2019 and u2018variantu2019 fields.
5.Then click on Create button and save. This releases the webservice you created in to soap Runtime.
6.Goto transaction <WSADMIN>
7.Open the tree structure to see the webservice that you just released and click on the right most button (Globe shape).
8.Select u2018Document Styleu2019
9.You have now created the wsdl file for the FM.

How to create chord charts from midi using logic pro x

How to create chord charts from midi using logic pro x

Depending on what you mean by Chord charts (Tabs?)
Use the Score.......
http://help.apple.com/logicpro/mac/10/#lgcpf755d649

Creating a WSDL from a perfectly working Logical DS in ALDSP 3.2

Similar Messages

Maybe you are looking for