How to create chord charts from midi using logic pro x

Depending on what you mean by Chord charts (Tabs?)
Use the Score.......
http://help.apple.com/logicpro/mac/10/#lgcpf755d649

Similar Messages

How to create polar chart in cewolf using jfreechart

in one of my jsp files i need to display polar chat ,I am trying to do this by using cewolf with the use of a bean which uses jfreechart ,*can any body tell me how to create a polar chat using jfreechart in cewolf*

in one of my jsp files i need to display polar chat ,I am trying to do this by using cewolf with the use of a bean which uses jfreechart ,*can any body tell me how to create a polar chat using jfreechart in cewolf*

How to create/delete files from filesystem using PL/SQL ? UTL_FILE?

Greetings,
I will start by explaining what i intend to do.
I have an application made in APEX. This application will have among other purposes the managment of pdf files which will reside in the filesystem.
I have questioned the person in charge to keep the pdf files in the database and not in the filesystem but without success.
So the pdf files reside in the filesystem and there is a record in a database table about them. A table keeps all info about the pdf, their location , size and name, creation date etc.
The APEX application will have a mecanism to allow the deletion of the pdf files if an administrator decides.
So it should be possible for an administrator to schedule the deletion of all pdf files whoe creation date is older than 2008 for example
So, how can i achieve that?
After some research i foudn about the UTL_FILE package which seems to have it takes to perform the task in issue.
My idea was to have a script in the operating system which runs nightly and reads a file containing all file names of the pdf to be erased.
The file which contains the names of the pdfs to be erased will be generated by the database a few minutes before.
If there are no pds files to be erased than the file containing the names will simply be empty
Are there any other viable solutions out there?
And as for opening/creating the file withn the pdf names, i use:
UTL_FILE.FOPEN (
location IN VARCHAR2,
filename IN VARCHAR2,
open_mode IN VARCHAR2,
max_linesize IN BINARY_INTEGER)
RETURN file_type;
And as for writing lines (a pdf name per line ), i use;
UTL_FILE.PUT_LINE (
file IN FILE_TYPE,
buffer IN VARCHAR2,
autoflush IN BOOLEAN DEFAULT FALSE);
is there a better solution?
thanks all.
-> My Homepage <-
Edited by: Igor Carrasco on Apr 14, 2009 3:11 PM
Edited by: Igor Carrasco on Apr 14, 2009 3:12 PM

Greetings,
I have read that link above, some questions still though.
I will provide some more information.
-First the database is in a windows server.
The windows server has a virtual drive mounted as z:\ <-- this points to a directory in virtual machine, i can manually access/create/delete files manually,i tested.
-Second utl_file_dir is defined as * , in t that enough to cover mounted drives? ( i can't change the init.ora and reboot the db right now :( gotta wait.. )
Do i explicitly have to define utfl_file_dir = z: ?
-Third haven't had the chance to test it on linux or any other operating system, assuming a virtual unit is mounted successfully and that the issues above are solved i should be able to operate on any mounted drive whatever the os, right?
Best regards

How to Create AP Invoice from PO using SDK

Hi,
I want to create an A/P Invoice thru SDK for which already the Purchase Order has been entered thru the front-end. How to do it? Using SBO objects I am loading the particular PO. But after that how to transfer everything in the PO to AP Invoice.
Thanx in advance.
with regards,
Ram.

Hi Ram,
Herewith an example:
        oInvoice = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oPurchaseInvoices)
        oPOrder.GetByKey(sOrder)
        oInvoice.CardCode = oPOrder.CardCode
        oInvoice.CardName = oPOrder.CardName
        oInvoice.Address = oPOrder.Address
        oInvoice.Address2 = oPOrder.Address2
        oInvoice.AgentCode = oPOrder.AgentCode
        oInvoice.Comments = oPOrder.Comments
        oInvoice.ContactPersonCode = oPOrder.ContactPersonCode
        oInvoice.DocDate = oPOrder.DocDate
        oInvoice.DocDueDate = oPOrder.DocDate
        oInvoice.FederalTaxID = oPOrder.FederalTaxID
        oInvoice.JournalMemo = "Based on Sales Order " & sOrder
        oInvoice.NumAtCard = oPOrder.NumAtCard
        oInvoice.Project = oPOrder.Project
        oInvoice.Reference1 = oPOrder.Reference1
        oInvoice.Reference2 = oPOrder.Reference2
        oInvoice.SalesPersonCode = oPOrder.SalesPersonCode
        oInvoice.SummeryType = oPOrder.SummeryType
        For i = 0 To oPOrder.Lines.Count - 1
            oPOrder.Lines.SetCurrentLine(i)
            If i > 0 Then
                oInvoice.Lines.Add()
            End If
            oInvoice.Lines.BaseEntry = oPOrder.DocEntry
            oInvoice.Lines.BaseLine = oPOrder.Lines.LineNum
            oInvoice.Lines.BaseType = 22
        Next
        If oInvoice.Add() <> 0 Then
            oApplication.MessageBox("Error: " & oCompany.GetLastErrorDescription)
        End If
        System.Runtime.InteropServices.Marshal.ReleaseComObject(oInvoice)
Hope it helps,
Adele

How to create a list from checkboxes using Numbers on iPad?

I am creating a guest list using Numbers foriPad. First sheet is a list of invited people with checkboxes (Yes/No/still to reply) in next column. In the next sheet i want create a list of everyone that has replied yes.
I have tried using the if statement, but I dont want any blank cells.
-IF(A2;TRUE;A1) gives name in A1 if box is checked, but gives 0 or something else if i specify. But i want to automatically start on next row to avoid blank or 0-
Example:
David   V
Lisa.     V
Derek
Brad.   V
Paul.
John
The separate list in another sheet should then be:
David
Lisa
Brad
Any help will be appreciated.

Can you use the the reorganize panel to sort the list?
Idon't have Numbers on the iOS so I am not sure. You are posting in the forum for Numbers on Mac OS X.
you can also add a new column (let's say C)
where
C1=if(A1, A1, "")
this will include the name from column A when the checkbox in B is checked. You can then copy column C and paste values using the menu item (Edit > Paste Values, or equivalent in iOS... not sure what it is)

How to create Bar chart from existing XML file

Hi all,
i'm new to flex, i need your help to develop a flex for
dashboard app. we have sample.xml file. by using this i need to
create a bar diagram or piechart.
Please help me out
The XMl looks like this.....
<?xml version="1.0" encoding="utf-8"?>
<user id="123412343">
<fullName>
<lastName>Telles</lastName>
<firstName>vijay</firstName>
</fullName>
<preferences>
<modWidth>235</modWidth>
<modHeight>250</modHeight>
<totalWidth>1650</totalWidth>
<totalHeight>1650</totalHeight>
<modsX>4</modsX>
<modsY>2</modsY>
</preferences>
<module id="Status2">
<windowOpen>true</windowOpen>
<pointsToShow>
<p label="Proposed"/>
<p label="Draft"/>
<p label="DEP Adpt"/>
<p label="EPA Adpt"/>
</pointsToShow>
<dataSetsToShow>
<label>2006</label>
<label>2007</label>
</dataSetsToShow>
</module>
</user>

convert this xml to ArrayCollection called chartData
var charOption:String = "totalHeight"; /Use this to set the
yField property...
<mx:ColumnChart showDataTips="true" id="barChart"
width="100%" height="100%" dataProvider="{chartData}"
color="0xffffff">
<mx:horizontalAxis>
<mx:CategoryAxis
dataProvider="{chartData}"
categoryField="hour" />
</mx:horizontalAxis>
<mx:verticalAxis>
<mx:LinearAxis labelFunction="addDollarSign"/>
</mx:verticalAxis>
<mx:series>
<mx:ColumnSeries yField="{chartOption}"
showDataEffect="interpolate"
creationCompleteEffect="interpolate"/>
</mx:series>
</mx:ColumnChart>

How can I export slideshows created in Aperture v3.3.2 from Mid-2009 MacBook Pro-17 to blank DVDs?

(Fifth futile attempt in two hours, before I learned there was a Post webpage – I’m new to ApSuppCom - and after I learned that I am not allowed to update previous content, so I had to back out, make a few changes, and start over.) How can I export slideshows created in Aperture v3.3.2 (complete with superimposed captions and music tracks) from Mid-2009 MacBook Pro-17 to blank DVDs ? (Some other specs: Mac OS Lion 10.7.5; Capacity 499.5 GB; Processor 2.8 GHz Intel Core 2 Duo; Memory 4GB 1067 MHz DDR3; Graphics NVIDIA GeForce 9400M 256MB)
I cannot do a copy (export) without various error messages appearing and the inevitable stoppage occurring. Always with the DVD Video Player final message reading, “Supported disc not available.” Advisors and Mac Geniuses at local Apple Stores have told me to try Roxio Toast. When I visited the Roxio website, and found numerous other company products, the descriptions all seemed to suggest that most of the apps shown can easily export videos to DVDs, but nothing was said about finished digital slide shows being exported. At future events soon, I hope to be handing out these finished DVDs (free) to the people in them. Any help will be greatly appreciated. A.Z.

How can I export slideshows created in Aperture v3.3.2 (complete with superimposed captions and music tracks) from Mid-2009 MacBook Pro-17 to blank DVDs ?
Aperture cannot burn slideshows to a DVD. It only can export a video of your slideshow.
In Aperture 3 you use the "Export" button in Aperture's slideshow project to render a video to a folder on your disk.
Then you use iDVD or another program to burn a video DVD.
I cannot do a copy (export) without various error messages appearing and the inevitable stoppage occurring. Always with the DVD Video Player final message reading, “Supported disc not available.”
Could you please describe the exact steps that are causing these error messages?
How are you exporting your slideshow from Aperture? Which settings are you using? And how are you importing the video to iDVD or Toast to burn a video DVD?
For more suggestions see Karsten Schlüter's user tip: How to create a video-DVD? (Macs without iDVD)

How to create dll file from c code to use in compactrio 9004 RT controller

Hi.
I am using Compactrio 9004 Real time controller and i am new to this. I have a C code and i want to use this with the RT controller.I red that that can be done by creating a dll file and can be called in labview.Can any body expalin how to create a DLL from the c code and be used with this RT controlelr?
Regards,
Vishnu

vishnu123 wrote:
Hi,
Earlier in this forum itself in cRIO 900x controllers will run Pharlap and run C/C++ code compiled into .dll files.Can you please tell how to transfer the created DLL to RT controller memory throght FTP?
Thanks and regards,
Vishnu
There is another KB article about this for Pharlap based controllers. And you are right the earlier CompactRIO controllers were Pharlap based. Basically for a deployed application to work, you need to put the DLL through FTP in "/ni-rt/system". If you deploy it directly from the project everything will be loaded into memory through the project environment itself including directly dependable DLLs, (but of course won't survive a power cycle).
I hope you are aware that while Windows DLLs can work on Pharlap OS they by no means will do so always. The Pharlap OS has not a fully featured Windows API. Also you need to be careful which version of Visual C you are going to use depending on the Pharlap OS version, since the VC runtime DLLs already present on the controller will need to be the same as the ones your Visual C environment likes to link in. Recent Pharlap OS versions use the msvcr71.dll. It's very possible that those runtime libraries can't just simply be copied from a normal Windows installation but might have been recompiled by NI specifically for their controller targets.
So to avoid problems it's a good idea to make sure your DLL uses the same runtime library DLL or make your DLL to include the static MS runtime.
Rolf Kalbermatter
Message Edited by rolfk on 02-05-2008 09:51 AM
Message Edited by rolfk on 02-05-2008 09:53 AM
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

How to create a chart with dates?

I've created a table with projects I have to deliver and the date they were delivered. I would like to create a chart from this data - however I can't figure out how to use date in the chart.
Ideally the chart would work with the date (lets say from jan 01 to april 5) on the x-axis and the project on the y-axis. And a line that goes from time A (which marks the initial part of the project) to the time B (which marks the delivery date) defined on the table.
Is it possible?
heres a pic of what i mean:
/Users/judavies/Desktop/Screen shot 2011-01-14 at 11.36.12 AM.png
Message was edited by: jujudavies

Hi Jerry,
I'm ALMOST there! If you could help me with one last thing it would be amazing. I've uploaded my number project and you can downloaded it on the link bellow, if you prefer.
I managed to do the same idea chart as you have. However I would like to have two bars for every JOB (y-axis). On my table i've inputed for every job 4 values = START DATE that was scheduled / Duration period scheduled (this happens prior to the job itself // START DATE Delivered / Duration Period Delivered (this is the actual time the JOB took place). This way I can see at the end of a JOB if I worked during the period I planned.
using your example on the chart above (your reply) Could Proposal have a bar 1.0 / 4.0 - and bellow this bar have another one (with different colours) that went from 2.0 / 5.0 - for example? - the first one representing the "scheduled dates"and the second one representing what actually happened.
I managed to do the four bars but couldnt manage to have them bellow each other.
Tks again for your help
files.me.com/jujudavies/wgugl1.numbers.zip
x'jul.

How to fetch published data from portal using ABAP

Hello,
I have a file published in the portal (with broadcaster). Now I want to use this file in an ABAP program. I can't call the web address directly because my program can't handle the Portal authentication. So I have two questions:
- is there any way to call Portal-websites which require authentication from ABAP?
or
- how can I directly get access to the file without detour over the Portal (where is the place in file system).
Thank you very much!
Martin

Hello Adrian,
Thank you very much for your reply.
> You can publish the report in MHTML format using the
> BEx Broadcaster to a mapped drive (completely
> independent of the portal) then you could pick this
> up from your ABAP program if you have access to that
> share.
What do you mean with "mapped drive" - <a href="http://http://help.sap.com/saphelp_erp2005vp/helpdata/en/42/e915d951f23ee0e10000000a1553f6/frameset.htm">this</a>? I guess I could choose this drive in broadcaster at "export document in any folder" (don't know exactly English label because my system is in German language...)?
> I dont really see the value of publishing the report
> to KM if all you are wanting to do is read this back
> into your ABAP program. Why are you wanting to
> publish the report to the portal in the first place?
I need to get the image of a BW-chart in ABAP because I want to use it in SAP Interactive Forms by Adobe (I have an ABAP program to fetch my data and create the form). I could create my own chart of the data with the Internet Graphics Service but this would be a lot of work. You can create this charts very easily using the Chart Designer which i.e. is included in the Web Application Designer. If you create a Web Site containing a chart you can access this via browser and you have the chart as an image (created from current data). I tried simply to call this website with ABAP but I can not "log in" and so I have no access to this page. Because of this I had the idea to use the broadcaster to automatically publish this Web Application when my data were updated. If I use MHTML my chart-image is saved separately. This just would work for me. And now I want to get this image as a binary with ABAP.
I hope you understand my problem.
Martin

How to create line chart

Hii Experts,
How to create line chart?
I want to prepaire a line chart in a report. i have 1 table. In a table have 2 fields. chart is created in these 2 field refrence how It's possible?
Thanx in Advance
Regards
Vshal

I found it very easy to produce a line chart in a window container using FM GFW_PRES_SHOW. In my case this produces a basic line graph with three lines across 15 time periods.
See transaction GRAL for various chart types...they're relatively easy to produce... I picked DEMO_GFW_PRES_SHOW report program from GRAL as my example for how to produce a simple line chart very quickly.

Need help in creating a chart from 3 datasets

Need help in creating a chart in SSRS from 3 datasets
Can someone help me in creating a chart from 3 datasets, however datasource is same.

Thank you Olaf...
could anyone help me in using union all with the below
WITH a AS (
SELECT
clientid,
DATEPART(year, row_date) AS 'Year',
DATEPART(month, row_date) AS 'Month',
value ,
CASE metricid WHEN 16 THEN 'FCR' ELSE 'Cases' END AS metric
FROM XXXXXX AS V
WHERE metricid IN (16, 11)
AND row_date BETWEEN '2012-01-01' AND '2014-10-01'
AND value IS NOT NULL)
, b AS (
SELECT clientid ,
Year ,
Month ,
value AS 'Cases',
metric
FROM a
WHERE metric = 'cases')
, c AS (
SELECT clientid ,
Year ,
Month ,
value AS 'FCR',
metric
FROM a
WHERE metric = 'FCR')
, d AS (
SELECT b.YEAR, b.MONTH, c.FCR, b.Cases
FROM b INNER JOIN c
ON c.clientid = b.clientid
AND c.[YEAR] = b.[year]
AND c.[month] = b.[month]
WHERE c.fcr <> 0 AND b.cases <> 0
,E AS (
SELECT [Year], [Month], SUM(FCR) AS FCR, SUM(Cases) AS Cases
FROM d
GROUP BY [Year], [Month])
select YEAR, MONTH,
CASE MONTH
WHEN 1 THEN 'Jan'
WHEN 2 THEN 'Feb'
WHEN 3 THEN 'Mar'
WHEN 4 THEN 'Apr'
WHEN 5 THEN 'May'
WHEN 6 THEN 'Jun'
WHEN 7 THEN 'Jul'
WHEN 8 THEN 'Aug'
WHEN 9 THEN 'Sep'
WHEN 10 THEN 'Oct'
WHEN 11 THEN 'Nov'
WHEN 12 THEN 'Dec'
END AS MonthName
,e.FCR AS FCRCases
,e.Cases AS TotalCases
,CASE
WHEN [month] IN (11, 12, 1) THEN 1
WHEN [month] IN (2, 3, 4) THEN 2
WHEN [month] IN (5, 6, 7) THEN 3
WHEN [month] IN (8, 9, 10) THEN 4
END AS 'Quarter'
--,CONVERT(DECIMAL(18, 2),(e.FCR/e.Cases)*100) AS FCRRaw
from e
order by YEAR, MONTH
**************2nd query*************
WITH a AS (
SELECT
clientid,
DATEPART(year, row_date) AS 'Year',
DATEPART(month, row_date) AS 'Month',
value,
CASE metricid WHEN 56 THEN 'numerator' ELSE 'denominator' END AS metric
FROM XXXXXXX.[Values] AS V
WHERE metricid IN (56, 10)
--WHERE metricid IN (11,16)
AND row_date BETWEEN '2013-10-01' AND '2014-02-01'
AND value IS NOT NULL)
, b AS (
SELECT clientid ,
Year ,
Month ,
value AS 'numerator',
metric
FROM a
WHERE metric = 'numerator')
, c AS (
SELECT clientid ,
Year ,
Month ,
value AS 'denominator',
metric
FROM a
WHERE metric = 'denominator')
, d AS (
SELECT b.YEAR, b.MONTH, c.denominator, b.numerator
FROM b INNER JOIN c
ON c.clientid = b.clientid
AND c.[YEAR] = b.[year]
AND c.[month] = b.[month]
WHERE c.denominator <> 0 AND b.numerator <> 0
, e AS (
SELECT [Year], [Month], SUM(numerator) AS numerator, SUM(denominator) AS denominator
FROM d
GROUP BY [Year], [Month]
SELECT *,
CASE
WHEN [month] IN (11, 12, 1) THEN 1
WHEN [month] IN (2, 3, 4) THEN 2
WHEN [month] IN (5, 6, 7) THEN 3
WHEN [month] IN (8, 9, 10) THEN 4
END AS 'Quarter'
FROM e
ORDER BY 1,2
******************3rd query**************
WITH a AS (
SELECT --L.[LocationGroupId],
-- T.locationid,
-- T.AccountId,
TR.datestamp,
/*Convert(NVARCHAR, DatePArt(year, TR.datestamp)) + '-' + Convert(NVARCHAR, DatePArt(month, TR.datestamp)) + '-01'*/
TR.Period AS ValueDate,
CASE WHEN TR.TargetResultState = 0 THEN 0 WHEN TR.TargetResultState = 1 THEN 1 WHEN TR.TargetResultState = 2 THEN 1 ELSE 0 END AS Met,
CASE WHEN CONVERT(DATE, Convert(NVARCHAR, DatePArt(year, TR.datestamp)) + '-' + Convert(NVARCHAR, DatePArt(month, TR.datestamp)) + '-01') > T.Startdate AND CONVERT(DATE, Convert(NVARCHAR, DatePArt(year, TR.datestamp))
+ '-' + Convert(NVARCHAR, DatePArt(month, TR.datestamp)) + '-01') < T.Enddate THEN 1 ELSE 0 END AS ActiveTarget
FROM XXXXXX AS TR
INNER JOIN dbo.Target T ON TR.TargetID = T.ID
--INNER JOIN dbo.Location L ON T.Locationid = L.Id
WHERE --locationid <> - 1 AND
TR.Period IN ('201306', '201307', '201308', '201309', '201310', '201311', '201312', '201401'))
select ValueDate, SUM(Met) AS Met, Count(ActiveTarget) AS ActiveTargets,
right(ValueDate,2) as Month
,left(ValueDate,4) as Year
,CASE
WHEN right(ValueDate,2) IN (11, 12, 1) THEN 1
WHEN right(ValueDate,2) IN (2, 3, 4) THEN 2
WHEN right(ValueDate,2) IN (5, 6, 7) THEN 3
WHEN right(ValueDate,2) IN (8, 9, 10) THEN 4
END AS 'Quarter'
from a
group by ValueDate
order by ValueDate

Create a PDF from webpage using entire site option doesn't works

OK, guys, this is the problem...
After YEARS of testing from Acrpbat 4 thru 9 on Create a PDF from webpage using entire site option... it doesn't works properly and doesn't got the entire site. ALWAYS get an error of memory or any other error but FINALLY you NEVER got the entire site. I'm talking for a big website... not like amazon.com, but a big one.
I make a walkarround to try to capture the website in parts but Acrobat is not "intelligent" to make a resume capture of the site, because ALWAYS start from the begining instead from the resume position of the site...
My question is, HOW can get the ENTIRE SITE in a PDF document... without getting errors or stopping the capture process...
Don't have problem of low RAM memory because I'm in a MONSTER MACINTOSH.... 3.2 GHZ with 8 Core and 32 GB of RAM under Mac OS X Leopard 10.5.6 in Acrobat 9 Pro.
If I'm not wrong, the GET ENTIRE SITE option in Web Capture (Create a PDF from webpage using entire site option) doesn't works from Acrobat 4 thru 9 in Pro version... tested, you'll never got the entire site... I'm talking in capture a huge entire site and not a little one...
Can someone help me?
Thanks.

Ok so I go to a web page and select something to print. Once I've clicked print I switch over from printer/micosoft xps docu writer/fax and select Adobe PDF. All goes through with a 'Create Adobe PDF' coming up progressing through to eventually save and store. Once I open the file it end up as the picture above. I have the same version on another computer and that works fine but this particular Sony laptop it doesn't seem to work properly.

How to create a stored procedure and use it in Crystal reports

Hi All,
Can anyone explain me how to create a stored procedure and use that stored procedure in Crystal reports. As I have few doubts in this process, It would be great if you can explain me with a small stored proc example.
Thanks in advance.

If you are using MSSQL SERVER then try creating a stored procedure like this
create proc Name
select * from Table
by executing this in sql query analyzer will create a stored procedure that returns all the data from Table
here is the syntax to create SP
Syntax
CREATE PROC [ EDURE ] procedure_name [ ; number ]
    [ { @parameter data_type }
        [ VARYING ] [ = default ] [ OUTPUT ]
    ] [ ,...n ]
[ WITH
    { RECOMPILE | ENCRYPTION | RECOMPILE , ENCRYPTION } ]
[ FOR REPLICATION ]
AS sql_statement [ ...n ]
Now Create new report and create new connection to your database and select stored procedure and add it to the report that shows all the columns and you can place the required fields in the report and refresh the report.
Regards,
Raghavendra
Edited by: Raghavendra Gadhamsetty on Jun 11, 2009 1:45 AM

How to create Inbound Idoc from XML file-Need help urgently

Hi,
can any one tell how to create inbound Idoc from XML file.
we have xml file in application server Ex. /usr/INT/SMS/PAYTEXT.xml' we want to generate inbound idoc from this file.we are successfully able to generate outbound XML file from outbound Idoc by using the XML port. But not able to generate idoc from XML file by using we19 or we16.
Please let me know the process to trigger inbound Idoc with out using XI and any other components.
Thanks in advance
Dora Reddy

Hi .. Did either of you get a result on this?
My question is the same really .. I am testing with WE19 and it seems SAP cannot accept an XML inbound file as standard.
I see lots of mention of using a Function Module.
Am I correct in saying therefore that ABAP development is required to create a program to run the FM and process the idoc?
Or is there something tht can be done with Standard SAP?
Thanks
Lee

How to create chord charts from midi using logic pro x

Similar Messages

Maybe you are looking for