Creating Active directory

Hi Geeks,
i need to develope an interface which is run every day and will send SAP HR data to Microsoft Active directory. It will handle 3 scenarios
1. create new accounts in Active directory for all new hires on the current date ( ie the date on which the interface is run).
2.De-activate the accounts for terminated employees on tht day
3. Update the LDAP account with any change in the PA data of the employee
using the Fm module
SPLDAP_RECEIVE_ATTRIBUTES
Regards,
Sudhakar Yadav

Hello,
For general services I use a service specific account within AD. This was before SSO and I use the same after SSO. SSO is used by only two services that I know about at the moment (Inventory Service and perhaps vCloud). However, there are many other service accounts that should be created. You want one account per service and I use AD for this, this way I can create a service account group and give it the appropriate roles and privileges. FOr example I have service accounts for:
VMware View
XenDesktop
vCops
HPSIM
Solarwinds
VMTurbo
NetApp
etc.
One service, one service account, each with either a general role or custom role depending on access requirements to vCenter.
For SSO, I to am waiting on general information, but I set mine up fairly basically to cover only those resources that make use of SSO. Since the vast majority of items do not use SSO, the rule still applies. Once SSO is supported by more than one or two tools, you still need to maintain that separation.
So I say yes, tie SSO to AD and do everything in one place, unfortunately, that is not very clear, or at least was not to me and these SSO issues are either beng fixed, documented, or both.
Best regards,
Edward L. Haletky aka Texiwill

Similar Messages

Creating active directory users with dscl

Our mac workstations (OSX 10.8) are bound to a 2008 Active Directory server. We are attempting to use some existing dscl scripts on the mac client computer to create Active directory users. We can successfully read and change AD attributes of an existing user with dscl, but creating new users or new attributes for an existing user gives us an error. Here are some examples.
SUCCESSFUL READ OF AD USER ATTRIBUTE:
root# dscl -u administrator "/Active Directory/CXAD/All Domains" -read /Users/jholmes SMBHomeDrive
Password:
SMBHomeDrive: H:
root#
SUCCESSFUL DELETE OF ABOVE USER ATTRIBUTE
root# dscl -u administrator "/Active Directory/CXAD/All Domains" -delete /Users/jholmes SMBHomeDrive
Password:
root#
FAILED ATTEMPT AT RE-CREATING THE DELETED ATTRIBUTE
root# dscl -u administrator "/Active Directory/CXAD/All Domains" -create /Users/jholmes SMBHomeDrive
Password:
<main> attribute status: eDSInvalidRecordType
<dscl_cmd> DS Error: -14130 (eDSInvalidRecordType)
root#
The same error occurs when attempting to create a new user. Any ideas? Thanks in advance for any suggestions.

In the end I could not find them; account info is ONLY stored locally in Open Directory when they have mobile accounts.
However, I found I could migrate their user directories in Terminal via ditto ( I connected the old macs via Firewire Target mode) , and when they log in all their stuff and settings are there.
the command is: ditto /Volumes/<old mac hard drive>/Users/<username> /Users/<username>

How to avoid duplicate DN exception when creating Active Directory Account

I am using OIM 9.1.0.2 to provision Active Directory accounts.
I run into issues when the DN of the user to be created already exists and I would like to know if anyone has some logic I can use to generate a different DN for new user by adding a number or something like that to the DN
Here is an example.
User 1 exists already and their DN: cn=john smith, cn=users, dc=company,dc=org
New user joins the company and his name is also john smith and he has no middle name: so system attempts to create his account as cn=john smith, cn=users, dc=company,dc=org
how can I accomplish this by making the account say cn=john smith_1, cn=users, dc=company,dc=org

855640 wrote:
I run into issues when the DN of the user to be created already exists and I would like to know if anyone has some logic I can use to generate a different DN for new user by adding a number or something like that to the DN
There are two different questions:
1. How to generate a sequence of candidates for the name attribute
2. How to check if a record with the given name candidate already exists in the Active Directory, and hence try the next candidate from the sequence.
The answer for the first part is usually defined by the policy existing in your organization, in the simplest case you can append sequential integer numbers to the end of the original name.
The answer for the second question is not so simple if you use are provisioning with MSAD connector.
There are two places you can put the check:
-- in the pre-populate adapter for the UD_ADUSER_COMMONNAME field
-- in the adpADCSCREATEUSER event handler, which is responsible for new AD user record creation.
Both cases need some coding, since you have to obtain the AD connection and search AD for matching records.
Pros & cons
Placing check code in the pre-populate adapter:
Pros:
the result is visible in the form, administrator can change the pre-calculated value if he wishes
Cons:
you need to have all access to connection parameters, and establish one extra connection
this is not the way OIM is supposed to work :-(
Placing check code in the AD user creation task:
Pros:
you have all access to connection parameters, and open a connection here anyway
Cons:
the result is not present in the form, so no way for manual interaction by administrator here
BTW: this problem is not only related to DN generation, some other AD attributes (e.g. sAMAccountName, mailNickName, userPrincipalName, mail) should be unique in the AD domain scope.
Edited by: madhatter on Sep 7, 2012 12:02 AM

Bulk create Active Directory Users and Groups in PowerShell using Excel XLSX source file instead of CSV

Hi Scripting Guy. I am a Server Administrator who is very familiar with Active Directory, but new to PowerShell. Like many SysAdmins, I often need to create multiple accounts (ranging from 3-200) and add them multiple groups (ranging
from 1 - 100). Previously I used VBS scripts in conjunction with an Excel .XLS file (not CSV file). Since VBS is essentially out the door and PowerShell is in - I am having to re-create everthing.
I have written a PowerShell script that bulk creates my users and adds them to their corresponding groups - however, this can only use a CSV file (NOT an XLS file). I understand that "CSV is much easier to use than Excel worksheets", but
most times I have three sets of nearly identical groups (for Dev, QA and Prod). Performing Search and Replace on the Excel template across all four Worksheets ensures the names used are consistent throughout the three environments.
I know each Excel Worksheet can be exported as a separate CSV file and then use the PowerShell scripts as is, but since I am not the only SysAdmin who will be using these it leads to "unnecessary time lost", not to mention the reality that even
though you clearly state "These tabs need to be exported using this naming standard" (to work with the PowerShell scripts) that is not the result.
I've been tasked to find a way to modify my existing PowerShell/CSV scripts to work with Excel spreadsheets/workbooks instead - with no success. I have run across many articles/forums/scirpts that let you update Excel or export AD data into an Excel
spreadsheet (even specifying the worksheet, column and row) - but nothing for what I am trying to do.
I can't imagine that I am the ONLY person who is in this situation/has this need. So, I am hoping you can help. How do I modify my existing scripts to reference "use this Excel spreadsheet, and this specific worksheet in the spreadsheet
prior to performing the New-ADUser/Add-ADGroupMember commands".
For reference, I am including Worksheet/Column names of my Excel Spreadsheet Template as well as the first part of my PowerShell script. M-A-N-Y T-H-A-N-K-S in advance.
   Worksheet: Accounts
     Columns: samAccountName, CN_DisplayName_Name, sn_LastName, givenName_FirstName, Password, Description, TargetOU
   Worksheets: DevGroups / QAGroups / ProdGroups
    Columns: GroupName, Members, MemberOf, Description, TargetOU
# Load PowerShell Active Directory module
Write-Host "Loading Active Directory PowerShell module." -foregroundcolor DarkCyan # -backgroundcolor Black
Import-Module ActiveDirectory
Write-Host " "
# Set parameter for location of CSV file (so source file only needs to be listed once).
$path = ".\CreateNewUsers-CSV.csv"
# Import CSV file as data source for remaining script.
$csv = Import-Csv -path $path | ForEach-Object {
# Add '@saccounty.net' suffix to samAccountName for UserPrincipalName
$userPrincinpal = $_."samAccountName" + "@saccounty.net"
# Create and configure new AD User Account based on information from the CSV source file.
Write-Host " "
Write-Host " "
Write-Host "Creating and configuring new user account from the CSV source file." -foregroundcolor Cyan # -backgroundcolor Black
New-ADUser -Name $_."cn_DisplayName_Name" `
-Path $_."TargetOU" `
-DisplayName $_."cn_DisplayName_Name" `
-GivenName $_."givenName_FirstName" `
-SurName $_."sn_LastName" `
-SamAccountName $_."samAccountName" `
-UserPrincipalName $userPrincinpal `

Here is the same script as a function:
Function Get-ExcelSheet{
Param(
$fileName = 'C:\scripts\test.xls',
$sheetName = 'csv2'
$conn = New-Object System.Data.OleDb.OleDbConnection("Provider=Microsoft.Jet.OLEDB.4.0;Data Source = $fileName;Extended Properties=Excel 8.0")
$cmd=$conn.CreateCommand()
$cmd.CommandText="Select * from [$sheetName$]"
$conn.open()
$cmd.ExecuteReader()
It is called like this:
Get-ExcelSheet -filename c:\temp\myfilename.xslx -sheetName mysheet
Do NOT change anything in the function and post the exact error. If you don't have Office installed correctly or are running 64 bits with a 32 bit session you will have to adjust your system.
¯\_(ツ)_/¯
HI JRV,
My apologies for not responding sooner - I was pulled off onto another project this week. I have included and called your Get-ExcelSheet function as best as I could...
# Load PowerShell Active Directory module
Write-Host "Loading Active Directory PowerShell module." -foregroundcolor DarkCyan # -backgroundcolor Black
Import-Module ActiveDirectory
Write-Host " "
# JRV This Function Loads the Excel Reader
Function Get-ExcelSheet{
Param(
$fileName = 'C:\scripts\test.xls',
$sheetName = 'csv2'
$conn = New-Object System.Data.OleDb.OleDbConnection("Provider=Microsoft.Jet.OLEDB.4.0;Data Source = $fileName;Extended Properties=Excel 8.0")
$cmd=$conn.CreateCommand()
$cmd.CommandText="Select * from [$sheetName$]"
$conn.open()
$cmd.ExecuteReader()
# Set parameter for location of CSV file (so source file only needs to be listed once) as well as Worksheet Names.
$sourceFile = ".\NewDocClass-XLS-Test.xlsx"
# Add '@saccounty.net' suffix to samAccountName for UserPrincipalName
$userPrincinpal = $_."samAccountName" + "@saccounty.net"
# Combine GivenName & SurName for DisplayName
$displayName = $_."sn_LastName" + ". " + $_."givenName_FirstName"
# JRV Call the Get-ExcelSheet function, providing FileName and SheetName values
# Pipe the data from source for remaining script.
Get-ExcelSheet -filename "E:\AD_Bulk_Update\NewDocClass-XLS-Test.xlsx" -sheetName "Create DocClass Accts" | ForEach-Object {
# Create and configure new AD User Account based on information from the CSV source file.
Write-Host " "
Write-Host " "
Write-Host "Creating and configuring new user account from the CSV source file." -foregroundcolor Cyan # -backgroundcolor Black
New-ADUser -Name ($_."sn_LastName" + ". " + $_."givenName_FirstName") `
-SamAccountName $_."samAccountName" `
-UserPrincipalName $userPrincinpal `
-Path $_."TargetOU" `
Below is the errors I get:
Exception calling "Open" with "0" argument(s): "The 'Microsoft.Jet.OLEDB.4.0'
provider is not registered on the local machine."
At E:\AD_Bulk_Update\Create-BulkADUsers-XLS.ps1:39 char:6
+ $conn.open()
+ ~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [], MethodInvocationException
+ FullyQualifiedErrorId : InvalidOperationException
Exception calling "ExecuteReader" with "0" argument(s): "ExecuteReader
requires an open and available Connection. The connection's current state is
closed."
At E:\AD_Bulk_Update\Create-BulkADUsers-XLS.ps1:40 char:6
+ $cmd.ExecuteReader()
+ ~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [], MethodInvocationException
+ FullyQualifiedErrorId : InvalidOperationException

Creating Active Directory Accounts for vSphere 5.1 Services

To set up the management pieces of vSphere, I need to have an account or accounts created in Active Directory. I need to determine how many to create and what permissions they need.
In Single Sign on Server, I need to choose an account that vCenter server will use when it connects to SSO. I can use the default admin@system-domain. Or I can add an account that is configured in Active Directory. Or, I can also use an active directory group instead of an individual user. What is the best way to do this and if I use an AD account, what permissions does it need at the domain level and at the local level on the Single Sign on Server? (I'm using multisite mode, so I can't use local accounts)
In SQL Server, I need to choose an account to use for the SQL server service. Should this account be an active directory account or a local user account? If so, what permissions should be assigned to the account in Active Directory and what permissions should be assigned to it on the local machine? What AD group, if any should it be a part of? What local permissions does it need?
In vCenter Server, I need to choose an account to run the "vCenter Server Service" in. Is it best to use the default "system" account or to use an account from Active Directory, or a local account?
I'm trying to get a big picture of an AD account/group strategy to use that covers the main management pieces of vSphere - vCenter Server, Single Sign on, Inventory Service, Web Client Services.
For example, create one group called "vSphere Services", then create separate accounts for each management piece, and assign them specific permissions on specific systems. Or create separate groups for each management piece and assign permissions to the groups. Is it better to consolidate some of these user names or split them out? Any experiences / suggestions welcome. Thanks.

Hello,
For general services I use a service specific account within AD. This was before SSO and I use the same after SSO. SSO is used by only two services that I know about at the moment (Inventory Service and perhaps vCloud). However, there are many other service accounts that should be created. You want one account per service and I use AD for this, this way I can create a service account group and give it the appropriate roles and privileges. FOr example I have service accounts for:
VMware View
XenDesktop
vCops
HPSIM
Solarwinds
VMTurbo
NetApp
etc.
One service, one service account, each with either a general role or custom role depending on access requirements to vCenter.
For SSO, I to am waiting on general information, but I set mine up fairly basically to cover only those resources that make use of SSO. Since the vast majority of items do not use SSO, the rule still applies. Once SSO is supported by more than one or two tools, you still need to maintain that separation.
So I say yes, tie SSO to AD and do everything in one place, unfortunately, that is not very clear, or at least was not to me and these SSO issues are either beng fixed, documented, or both.
Best regards,
Edward L. Haletky aka Texiwill

Adobe Form that Creates Active Directory User Account

Hello all! Hopefully someone can help me with this. I am using Adobe LiveCycle Designer ES 8.2 to create a user account request form. I have the form created and now am working on a submit button that will email the form to the approving officials. Once its emailed to the approving officials I would like to have a button available in which the approval person can select resulting in the creation of an Active Directory user account. I need the fields in the form to populate cooresponding fields inside of Active Directory. Current AD structure is on Server 2003. Are there any ideas for how to accomplish this?

I don't know. However, you might get a better or faster answer in the LiveCycle forum that deals with Designer.

Need to automatically add newly created user account in an existing active directory group.

Hi All ,
In my environment we are having window server 2012 active directory environment.We need to have the newly created active directory user account to get added automatically to the existing active directory group after that new user account creation.
Please tell us the possible ways to achieve this scenario.
Regards
S.Nithyanandham
Thanks S.Nithyanandham

Hi,
Can you please confirm your requirement,
When you create a new user account in AD, based on the user's property like Department, Job or Location, the user need to be added to your specific AD groups?
Regards,
Gopi
JiJi
Technologies

Powershell Active Directory Account Expiration Script

I am putting together a script that creates a user account in AD, sets the password, adds groups, etc. The part I am having problems with is when the user selects the Contractor employee option and is prompted for the expiration date of the AD account.
The script will create the account, but the expiration date is not set in AD. Any suggestions?
Here's the code:
#Script to create Active Directory account
#Add the Active Directory Module if not already present
if (-not (Get-Module ActiveDirectory))
Import-Module ActiveDirectory -Force
Write-Host ""
Write-Host "======================================================" -ForegroundColor DarkYellow
Write-Host ""
Write-Host "Computer Access"
Write-Host "Create Active Directory User Script"
Write-Host "PowerShell 3.0"
Write-Host "Version: 1.2"
Write-Host "Date: 4/14/2014"
Write-Host "Author: "
Write-Host ""
Write-Host "Please review the created Active Directory Account" -ForegroundColor Red -BackgroundColor Yellow
Write-Host ""
Write-Host "Base Business Unit Group Memberships are added only" -ForegroundColor Red -BackgroundColor Yellow
Write-Host ""
Write-Host "======================================================" -ForegroundColor DarkYellow
Write-Host ""
Write-Host ""
Write-Host "======================================================" -ForegroundColor DarkYellow
Write-Host "Creating Active Directory Account" -ForegroundColor Yellow
Write-Host "======================================================" -ForegroundColor DarkYellow
Write-Host ""
#Specify the target OU for new users
$targetOU = "OU=Personnel,OU=ETA,DC=eta,DC=state,DC=tx"
#Find the current domain info
$domdns = (Get-ADDomain).dnsroot # for UPN generation
#Set Account Variables
#Set Username with Dialogue Box
[void] [System.Reflection.Assembly]::LoadWithPartialName("System.Drawing")
[void] [System.Reflection.Assembly]::LoadWithPartialName("System.Windows.Forms")
$objForm = New-Object System.Windows.Forms.Form
$objForm.Font = New-Object System.Drawing.Font("Arial",10)
$objForm.Text = "Username"
$objForm.Size = New-Object System.Drawing.Size(300,200)
$objForm.StartPosition = "CenterScreen"
$objForm.KeyPreview = $True
$objForm.Add_KeyDown({if ($_.KeyCode -eq "Enter")
    {$global:setusername=$objTextBox.Text;$objForm.Close()}})
$objForm.Add_KeyDown({if ($_.KeyCode -eq "Escape")
    {$objForm.Close()}})
$OKButton = New-Object System.Windows.Forms.Button
$OKButton.Location = New-Object System.Drawing.Size(75,120)
$OKButton.Size = New-Object System.Drawing.Size(75,23)
$OKButton.Text = "OK"
$OKButton.Add_Click({$global:setusername=$objTextBox.Text;$objForm.Close()})
$objForm.Controls.Add($OKButton)
$CancelButton = New-Object System.Windows.Forms.Button
$CancelButton.Location = New-Object System.Drawing.Size(150,120)
$CancelButton.Size = New-Object System.Drawing.Size(75,23)
$CancelButton.Text = "Cancel"
$CancelButton.Add_Click(
{$Looping=$False
$objForm.Close()
[environment]::Exit(0)
$objForm.Controls.Add($CancelButton)
$objLabel = New-Object System.Windows.Forms.Label
$objLabel.Location = New-Object System.Drawing.Size(10,20)
$objLabel.Size = New-Object System.Drawing.Size(280,20)
$objLabel.Text = "Please enter the username for the account:"
$objForm.Controls.Add($objLabel)
$objTextBox = New-Object System.Windows.Forms.TextBox
$objTextBox.Location = New-Object System.Drawing.Size(10,40)
$objTextBox.Size = New-Object System.Drawing.Size(260,20)
$objForm.Controls.Add($objTextBox)
$objForm.Topmost = $True
$objForm.Add_Shown({$objForm.Activate(); $objTextBox.focus()})
[void] $objForm.ShowDialog()
#If OK then set variable and continue
$samname = ($setusername | Out-String)
$samname = ($setusername) + ("")
function validateUser
    param(
    [string]$username
    #if the username is passed without domain\
    if(($username.StartsWith("domain\")) -eq $false)
        $user = Get-ADUser -Filter { SamAccountName -eq $username }
        if (!$user)
            return $false
        else
            return $true
    elseif(($username.StartsWith("domain\")) -eq $true)
        $username = ($username.Split("\")[1])
        $user = Get-ADUser -Filter { SamAccountName -eq $username }
        if (!$user)
            return $false
        else
            return $true
$usercheck = validateUser -username $samname
if($userCheck -eq $true) {
[System.Reflection.Assembly]::LoadWithPartialName("System.Windows.Forms")
[Windows.Forms.MessageBox]::Show("Username already exists in AD please check and retry",`
"Username Check", [Windows.Forms.MessageBoxButtons]::OK, [Windows.Forms.MessageBoxIcon]::Stop)
[environment]::Exit(0)
else {} #Continue
Write-Host ""
Write-Host "USERNAME has been set to" $samname -ForegroundColor Yellow
#Set User Accounts First Name
[void] [System.Reflection.Assembly]::LoadWithPartialName("System.Drawing")
[void] [System.Reflection.Assembly]::LoadWithPartialName("System.Windows.Forms")
$objForm = New-Object System.Windows.Forms.Form
$objForm.Font = New-Object System.Drawing.Font("Arial",10)
$objForm.Text = "First Name"
$objForm.Size = New-Object System.Drawing.Size(300,200)
$objForm.StartPosition = "CenterScreen"
$objForm.KeyPreview = $True
$objForm.Add_KeyDown({if ($_.KeyCode -eq "Enter")
    {$global:setfirstname=$objTextBox.Text;$objForm.Close()}})
$objForm.Add_KeyDown({if ($_.KeyCode -eq "Escape")
    {$objForm.Close()}})
$OKButton = New-Object System.Windows.Forms.Button
$OKButton.Location = New-Object System.Drawing.Size(75,120)
$OKButton.Size = New-Object System.Drawing.Size(75,23)
$OKButton.Text = "OK"
$OKButton.Add_Click({$global:setfirstname=$objTextBox.Text;$objForm.Close()})
$objForm.Controls.Add($OKButton)
$CancelButton = New-Object System.Windows.Forms.Button
$CancelButton.Location = New-Object System.Drawing.Size(150,120)
$CancelButton.Size = New-Object System.Drawing.Size(75,23)
$CancelButton.Text = "Cancel"
$CancelButton.Add_Click(
{$Looping=$False
$objForm.Close()
[environment]::Exit(0)
$objForm.Controls.Add($CancelButton)
$objLabel = New-Object System.Windows.Forms.Label
$objLabel.Location = New-Object System.Drawing.Size(10,20)
$objLabel.Size = New-Object System.Drawing.Size(280,20)
$objLabel.Text = "Please enter the users first name:"
$objForm.Controls.Add($objLabel)
$objTextBox = New-Object System.Windows.Forms.TextBox
$objTextBox.Location = New-Object System.Drawing.Size(10,40)
$objTextBox.Size = New-Object System.Drawing.Size(260,20)
$objForm.Controls.Add($objTextBox)
$objForm.Topmost = $True
$objForm.Add_Shown({$objForm.Activate(); $objTextBox.focus()})
[void] $objForm.ShowDialog()
#If OK then set variable and continue
$givname = ($setfirstname | Out-String)
$givname = ("$setfirstname") + ("")
Write-Host ""
Write-Host "FIRST NAME has been set to" $givname -ForegroundColor Yellow
#Set User Accounts Last Name
[void] [System.Reflection.Assembly]::LoadWithPartialName("System.Drawing")
[void] [System.Reflection.Assembly]::LoadWithPartialName("System.Windows.Forms")
$objForm = New-Object System.Windows.Forms.Form
$objForm.Font = New-Object System.Drawing.Font("Arial",10)
$objForm.Text = "Last Name"
$objForm.Size = New-Object System.Drawing.Size(300,200)
$objForm.StartPosition = "CenterScreen"
$objForm.KeyPreview = $True
$objForm.Add_KeyDown({if ($_.KeyCode -eq "Enter")
    {$global:setlastname=$objTextBox.Text;$objForm.Close()}})
$objForm.Add_KeyDown({if ($_.KeyCode -eq "Escape")
    {$objForm.Close()}})
$OKButton = New-Object System.Windows.Forms.Button
$OKButton.Location = New-Object System.Drawing.Size(75,120)
$OKButton.Size = New-Object System.Drawing.Size(75,23)
$OKButton.Text = "OK"
$OKButton.Add_Click({$global:setlastname=$objTextBox.Text;$objForm.Close()})
$objForm.Controls.Add($OKButton)
$CancelButton = New-Object System.Windows.Forms.Button
$CancelButton.Location = New-Object System.Drawing.Size(150,120)
$CancelButton.Size = New-Object System.Drawing.Size(75,23)
$CancelButton.Text = "Cancel"
$CancelButton.Add_Click(
{$Looping=$False
$objForm.Close()
[environment]::Exit(0)
$objForm.Controls.Add($CancelButton)
$objLabel = New-Object System.Windows.Forms.Label
$objLabel.Location = New-Object System.Drawing.Size(10,20)
$objLabel.Size = New-Object System.Drawing.Size(280,20)
$objLabel.Text = "Please enter the users last name:"
$objForm.Controls.Add($objLabel)
$objTextBox = New-Object System.Windows.Forms.TextBox
$objTextBox.Location = New-Object System.Drawing.Size(10,40)
$objTextBox.Size = New-Object System.Drawing.Size(260,20)
$objForm.Controls.Add($objTextBox)
$objForm.Topmost = $True
$objForm.Add_Shown({$objForm.Activate(); $objTextBox.focus()})
[void] $objForm.ShowDialog()
#If OK then set variable and continue
$surname = ($setlastname | Out-String)
$surname = ("$setlastname") + ("")
Write-Host ""
Write-Host "LAST NAME has been set to" $surname -ForegroundColor Yellow
#Set the Department Number for the Active Directory Account
[void] [System.Reflection.Assembly]::LoadWithPartialName("System.Drawing")
[void] [System.Reflection.Assembly]::LoadWithPartialName("System.Windows.Forms")
$objForm = New-Object System.Windows.Forms.Form
$objForm.Font = New-Object System.Drawing.Font("Arial",10)
$objForm.Text = "Cost Center"
$objForm.Size = New-Object System.Drawing.Size(300,200)
$objForm.StartPosition = "CenterScreen"
$objForm.KeyPreview = $True
$objForm.Add_KeyDown({if ($_.KeyCode -eq "Enter")
    {$global:setcostcode=$objTextBox.Text;$objForm.Close()}})
$objForm.Add_KeyDown({if ($_.KeyCode -eq "Escape")
    {$objForm.Close()}})
$OKButton = New-Object System.Windows.Forms.Button
$OKButton.Location = New-Object System.Drawing.Size(75,120)
$OKButton.Size = New-Object System.Drawing.Size(75,23)
$OKButton.Text = "OK"
$OKButton.Add_Click({$global:setcostcode=$objTextBox.Text;$objForm.Close()})
$objForm.Controls.Add($OKButton)
$CancelButton = New-Object System.Windows.Forms.Button
$CancelButton.Location = New-Object System.Drawing.Size(150,120)
$CancelButton.Size = New-Object System.Drawing.Size(75,23)
$CancelButton.Text = "Cancel"
$CancelButton.Add_Click(
{$Looping=$False
$objForm.Close()
[environment]::Exit(0)
$objForm.Controls.Add($CancelButton)
$objLabel = New-Object System.Windows.Forms.Label
$objLabel.Location = New-Object System.Drawing.Size(10,20)
$objLabel.Size = New-Object System.Drawing.Size(280,20)
$objLabel.Text = "Please enter the cost center for the account:"
$objForm.Controls.Add($objLabel)
$objTextBox = New-Object System.Windows.Forms.TextBox
$objTextBox.Location = New-Object System.Drawing.Size(10,40)
$objTextBox.Size = New-Object System.Drawing.Size(260,20)
$objForm.Controls.Add($objTextBox)
$objForm.Topmost = $True
$objForm.Add_Shown({$objForm.Activate(); $objTextBox.focus()})
[void] $objForm.ShowDialog()
#If OK then set variable and continue
$costcode = ($setcostcode | Out-String)
$costcode = ("$setcostcode") + ("")
Write-Host ""
Write-Host "COSTCODE has been set to" $costcode -ForegroundColor Yellow
#This creates a checkbox called Employee
$objTypeCheckbox = New-Object System.Windows.Forms.Checkbox
$objTypeCheckbox.Location = New-Object System.Drawing.Size(10,220)
$objTypeCheckbox.Size = New-Object System.Drawing.Size(500,20)
$objTypeCheckbox.Text = "Employee"
$objTypeCheckbox.TabIndex = 4
$objForm.Controls.Add($objTypeCheckbox)
#This creates a checkbox called Citrix User
$objCitrixUserCheckbox = New-Object System.Windows.Forms.Checkbox
$objCitrixUserCheckbox.Location = New-Object System.Drawing.Size(10,240)
$objCitrixUserCheckbox.Size = New-Object System.Drawing.Size(500,20)
$objCitrixUserCheckbox.Text = "Citrix User"
$objCitrixUserCheckbox.TabIndex = 5
$objForm.Controls.Add($objCitrixUserCheckbox)
#Set Permanent or Contractor (Expiration Date)
[void][reflection.assembly]::Load("System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089")
[void][reflection.assembly]::Load("System.Drawing, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a")
[System.Windows.Forms.Application]::EnableVisualStyles()
$form1 = New-Object 'System.Windows.Forms.Form'
$datetimepicker1 = New-Object 'System.Windows.Forms.DateTimePicker'
$radiobuttonPermanent = New-Object 'System.Windows.Forms.RadioButton'
$radiobuttonContractor = New-Object 'System.Windows.Forms.RadioButton'
$buttonOK = New-Object 'System.Windows.Forms.Button'
$InitialFormWindowState = New-Object 'System.Windows.Forms.FormWindowState'
$radiobuttonContractor_CheckedChanged={
    if($radiobuttonContractor.Checked){
        $datetimepicker1.Visible=$true
   }else{
        $datetimepicker1.Visible=$false
$Form_StateCorrection_Load=
   #Correct the initial state of the form to prevent the .Net maximized form issue
   $form1.WindowState = $InitialFormWindowState
$Form_Cleanup_FormClosed=
   #Remove all event handlers from the controls
   try
       $radiobuttonContractor.remove_CheckedChanged($radiobuttonContractor_CheckedChanged)
       $form1.remove_Load($FormEvent_Load)
       $form1.remove_Load($Form_StateCorrection_Load)
       $form1.remove_FormClosed($Form_Cleanup_FormClosed)
   catch [Exception]
$form1.Controls.Add($datetimepicker1)
$form1.Controls.Add($radiobuttonPermanent)
$form1.Controls.Add($radiobuttonContractor)
$form1.Controls.Add($buttonOK)
$form1.AcceptButton = $buttonOK
$form1.ClientSize = '508, 262'
$form1.FormBorderStyle = 'FixedDialog'
$form1.MaximizeBox = $False
$form1.MinimizeBox = $False
$form1.Name = "form1"
$form1.StartPosition = 'CenterScreen'
$form1.Text = "Form"
$form1.add_Load($FormEvent_Load)
# datetimepicker1
$datetimepicker1.Location = '160, 91'
$datetimepicker1.Name = "datetimepicker1"
$datetimepicker1.Size = '200, 20'
$datetimepicker1.TabIndex = 3
$datetimepicker1.Visible = $False
# radiobuttonPermanent
$radiobuttonPermanent.Location = '33, 57'
$radiobuttonPermanent.Name = "radiobuttonPermanent"
$radiobuttonPermanent.Size = '104, 24'
$radiobuttonPermanent.TabIndex = 2
$radiobuttonPermanent.TabStop = $True
$radiobuttonPermanent.Text = "Permanent"
$radiobuttonPermanent.UseVisualStyleBackColor = $True
# radiobuttonContractor
$radiobuttonContractor.Location = '33, 87'
$radiobuttonContractor.Name = "radiobuttonContractor"
$radiobuttonContractor.Size = '104, 24'
$radiobuttonContractor.TabIndex = 1
$radiobuttonContractor.TabStop = $True
$radiobuttonContractor.Text = "Contractor"
$radiobuttonContractor.UseVisualStyleBackColor = $True
$radiobuttonContractor.add_CheckedChanged($radiobuttonContractor_CheckedChanged)
# buttonOK
$buttonOK.Anchor = 'Bottom, Right'
$buttonOK.DialogResult = 'OK'
$buttonOK.Location = '421, 227'
$buttonOK.Name = "buttonOK"
$buttonOK.Size = '75, 23'
$buttonOK.TabIndex = 0
$buttonOK.Text = "OK"
$buttonOK.UseVisualStyleBackColor = $True
#endregion Generated Form Code
#Save the initial state of the form
$InitialFormWindowState = $form1.WindowState
#Init the OnLoad event to correct the initial state of the form
$form1.add_Load($Form_StateCorrection_Load)
#Clean up the control events
$form1.add_FormClosed($Form_Cleanup_FormClosed)
#Show the Form
$form1.ShowDialog()
#Set the password for the new user account
#Change P@$$w0rd to whatever you want the account password to be
[void] [System.Reflection.Assembly]::LoadWithPartialName("System.Drawing")
[void] [System.Reflection.Assembly]::LoadWithPartialName("System.Windows.Forms")
$objForm = New-Object System.Windows.Forms.Form
$objForm.Font = New-Object System.Drawing.Font("Arial",10)
$objForm.Text = "Password"
$objForm.Size = New-Object System.Drawing.Size(300,200)
$objForm.StartPosition = "CenterScreen"
$objForm.KeyPreview = $True
$objForm.Add_KeyDown({if ($_.KeyCode -eq "Enter")
    {$global:setpassword=$objTextBox.Text;$objForm.Close()}})
$objForm.Add_KeyDown({if ($_.KeyCode -eq "Escape")
    {$objForm.Close()}})
$OKButton = New-Object System.Windows.Forms.Button
$OKButton.Location = New-Object System.Drawing.Size(75,120)
$OKButton.Size = New-Object System.Drawing.Size(75,23)
$OKButton.Text = "OK"
$OKButton.Add_Click({$global:setpassword=$objTextBox.Text;$objForm.Close()})
$objForm.Controls.Add($OKButton)
$CancelButton = New-Object System.Windows.Forms.Button
$CancelButton.Location = New-Object System.Drawing.Size(150,120)
$CancelButton.Size = New-Object System.Drawing.Size(75,23)
$CancelButton.Text = "Cancel"
$CancelButton.Add_Click(
{$Looping=$False
$objForm.Close()
[environment]::Exit(0)
$objForm.Controls.Add($CancelButton)
$objLabel = New-Object System.Windows.Forms.Label
$objLabel.Location = New-Object System.Drawing.Size(10,20)
$objLabel.Size = New-Object System.Drawing.Size(280,40)
$objLabel.Text = "Please enter the password you wish to set. Press Enter for P@SSw0rd:"
$objForm.Controls.Add($objLabel)
$objTextBox = New-Object System.Windows.Forms.TextBox
$objTextBox.Location = New-Object System.Drawing.Size(10,60)
$objTextBox.Size = New-Object System.Drawing.Size(260,20)
$objForm.Controls.Add($objTextBox)
$objForm.Topmost = $True
$objForm.Add_Shown({$objForm.Activate(); $objTextBox.focus()})
[void] $objForm.ShowDialog()
#If OK then set password and continue
$userpassword = ($setpassword | Out-String)
$userpassword = ("$setpassword") + ("")
if ($userpassword -eq "") {$userpassword = 'P@SSw0rd'}
$password = (ConvertTo-SecureString $userpassword -AsPlainText -Force)
#Set Variables for New-ADUser cmdlet
$dplname = "$surname, $givname"
$upname = "$givname.$surname" + "@" + "$domdns"
$email = "$givname" + "." + "$surname" + "@eta.state.tx.us"
$office = "WBT"
$description = "$costcode"
$description2 = "611IS - Permanent"
$description3 = "611PM - Permanent"
$description4 = "501 - Permanent"
##$loginscript = "yourloginscriptname"
$servername = "teafs2"
$homedir = "\\$($servername)\User\$($samname)"
$homedirpath = "\\$($servername)\User\$($samname)"
$Company= "ETA"
$department = "yourdepartment"
$department4 = "School Finance"
$departmentnumber = "" + "-" + "$costcode"
Write-Host ""
Write-Host "HOME SERVER is" $servername -ForegroundColor Yellow
Write-Host ""
Write-Host "HOME DIRECTORY has been set to" $homedir -ForegroundColor Yellow
Write-Host ""
Write-Host "DEPARTMENT has been set to" $department -ForegroundColor Yellow
Write-Host ""
Write-Host "DESCRIPTION has been set to" $departmentnumber -ForegroundColor Yellow
Write-Host ""
#Create Active Directory Account
New-ADUser -Name $dplname -SamAccountName $samname -DisplayName $dplname `
-givenname $givname -surname $surname -userprincipalname $upname -emailaddress $email `
-Path $targetou -Enabled $true -ChangePasswordAtLogon $true -Department $department `
-OtherAttributes @{'departmentNumber'="$departmentnumber"} -Company $Company -HomeDrive "H" -HomeDirectory $homedir `
-Description $description -Office $office -ScriptPath $loginscript -AccountPassword $password `
#Add User to Active Directory Groups Based on Description Field
If ((Get-ADUser $samname -Properties description).description -eq $description2) {
Add-ADGroupMember -Identity "CN=InformationSystemsPrintGroup,CN=Groups,OU=ETA,DC=tea,DC=state,DC=tx" -Member $samname
Add-ADGroupMember -Identity "CN=InformationSystemsOUDataGroup,CN=Groups,OU=ETA,DC=tea,DC=state,DC=tx" -Member $samname
Add-ADGroupMember -Identity "CN=InformationSystemsNetworkAccess,CN=Groups,OU=ETA,DC=tea,DC=state,DC=tx" -Member $samname
Add-ADGroupMember -Identity "CN=Mail users,OU=Groups,DC=tea,DC=state,DC=tx" -Member $samname
If ((Get-ADUser $samname -Properties description).description -eq $description3) {
Add-ADGroupMember -Identity "CN=ProjectMgmtNetworkAccess,CN=Groups,OU=ETA,DC=tea,DC=state,DC=tx" -Member $samname
Add-ADGroupMember -Identity "CN=ProjectMgmtOUDataGroup,CN=Groups,OU=ETA,DC=tea,DC=state,DC=tx" -Member $samname
Add-ADGroupMember -Identity "CN=ProjectMgmtPrintGroup,CN=Groups,OU=ETA,DC=tea,DC=state,DC=tx" -Member $samname
Add-ADGroupMember -Identity "CN=Cognos ETASE Dev-Test-Prod,OU=Groups,DC=tea,DC=state,DC=tx" -Member $samname
Add-ADGroupMember -Identity "CN=PMO ALL,OU=Distribution Groups,OU=Mailbox accounts,DC=tea,DC=state,DC=tx" -Member $samname
Add-ADGroupMember -Identity "CN=PMO Permanent,OU=Distribution Groups,OU=Mailbox accounts,DC=tea,DC=state,DC=tx" -Member $samname
Add-ADGroupMember -Identity "CN=Mail users,OU=Groups,DC=tea,DC=state,DC=tx" -Member $samname
If ((Get-ADUser $samname -Properties description).description -eq $description4) {
Add-ADGroupMember -Identity "CN=SchoolFinancePrintGroup,CN=Groups,OU=ETA,DC=tea,DC=state,DC=tx" -Member $samname
Add-ADGroupMember -Identity "CN=SchoolFinanceOUDataGroup,CN=Groups,OU=ETA,DC=tea,DC=state,DC=tx" -Member $samname
Add-ADGroupMember -Identity "CN=SchoolFinanceNetworkAccess,CN=Groups,OU=ETA,DC=tea,DC=state,DC=tx" -Member $samname
Add-ADGroupMember -Identity "CN=Mail users,OU=Groups,DC=tea,DC=state,DC=tx" -Member $samname
#Does the user require a mailbox?
$mailbox = New-Object -ComObject wscript.shell
$intAnswer = $mailbox.popup("Does this user require a mailbox?", `
0,"Create Mailbox",32+4)
If ($intAnswer -eq 6) {
    Add-ADGroupMember -Identity "YourADGroupName5" -Member $samname
    $mailbox.popup("User added to EMail Provisioning Group", `
    0,"Created",64+0)
} else {
    $mailbox.popup("User has not been added to the EMail Provisioning Group", `
    0,"Not Created",64+0)
#Does the user require a LYNC Account?
$lyncaccount = New-Object -ComObject wscript.shell
$intAnswer = $lyncaccount.popup("Does this user require a LYNC Account?", `
0,"Create LYNC Account",32+4)
If ($intAnswer -eq 6) {
    Add-ADGroupMember -Identity "YourADGroupName6" -Member $samname
    $lyncaccount.popup("User added to LYNC Provisioning Group", `
    0,"Created",64+0)
} else {
    $lyncaccount.popup("User has not been added to the LYNC Provisioning Group", `
    0,"Not Created",64+0)
#Create Home Directory and Set Permissions on Home Directory
New-Item -path $homedirpath -type directory
$acl = Get-ACL -path $homedirpath
$permission = "yourdomainname\$($samname)","Modify","ContainerInherit,ObjectInherit","None","Allow"
$accessrule = new-object System.Security.AccessControl.FileSystemAccessRule $permission
$acl.SetAccessRule($accessrule)
$acl | Set-ACL -path $homedirpath
##Set Share Permissions on Home Directory
$Computer = $servername
$Class = "Win32_Share"
$Method = "Create"
$name = $sharename
$path = $sharedirpath
$description = ""
$sd = ([WMIClass] "\\$Computer\root\cimv2:Win32_SecurityDescriptor").CreateInstance()
$ACE = ([WMIClass] "\\$Computer\root\cimv2:Win32_ACE").CreateInstance()
$Trustee = ([WMIClass] "\\$Computer\root\cimv2:Win32_Trustee").CreateInstance()
$Trustee.Name = "EVERYONE"
$Trustee.Domain = $Null
$Trustee.SID = @(1, 1, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0)
$ace.AccessMask = 2032127
$ace.AceFlags = 3
$ace.AceType = 0
$ACE.Trustee = $Trustee
$sd.DACL += $ACE.psObject.baseobject
$mc = [WmiClass]"\\$Computer\ROOT\CIMV2:$Class"
$InParams = $mc.psbase.GetMethodParameters($Method)
$InParams.Access = $sd
$InParams.Description = $description
$InParams.MaximumAllowed = $Null
$InParams.Name = $name
$InParams.Password = $Null
$InParams.Path = $path
$InParams.Type = [uint32]0
$R = $mc.PSBase.InvokeMethod($Method, $InParams, $Null)
switch ($($R.ReturnValue))
0 {Write-Host "Share:$name Path:$path Result:Success"; break}
2 {Write-Host "Share:$name Path:$path Result:Access Denied" -foregroundcolor red -backgroundcolor yellow;break}
8 {Write-Host "Share:$name Path:$path Result:Unknown Failure" -foregroundcolor red -backgroundcolor yellow;break}
9 {Write-Host "Share:$name Path:$path Result:Invalid Name" -foregroundcolor red -backgroundcolor yellow;break}
10 {Write-Host "Share:$name Path:$path Result:Invalid Level" -foregroundcolor red -backgroundcolor yellow;break}
21 {Write-Host "Share:$name Path:$path Result:Invalid Parameter" -foregroundcolor red -backgroundcolor yellow;break}
22 {Write-Host "Share:$name Path:$path Result:Duplicate Share" -foregroundcolor red -backgroundcolor yellow;break}
23 {Write-Host "Share:$name Path:$path Result:Reedirected Path" -foregroundcolor red -backgroundcolor yellow;break}
24 {Write-Host "Share:$name Path:$path Result:Unknown Device or Directory" -foregroundcolor red -backgroundcolor yellow;break}
25 {Write-Host "Share:$name Path:$path Result:Network Name Not Found" -foregroundcolor red -backgroundcolor yellow;break}
default {Write-Host "Share:$name Path:$path Result:*** Unknown Error ***" -foregroundcolor red -backgroundcolor yellow;break}

Would you be able to show me how it's done?
Here's an example:
$date = Read-Host 'Enter a date (e.g. 4/23/14)'
Write-Host "Original string: $date"
$dateTime = [datetime]$date
Write-Host "DateTime object: $dateTime"
Don't retire TechNet! -
(Don't give up yet - 12,830+ strong and growing)

[SCCM 2012 R2] Cross forest Active Directory Boundaries

Hi All,
What process/component update information (subnets) for already imported AD Site Boundary?
How can I be sure that automatically created Active Directory boundaries from native and cross domains really import/use all subnets from AD Sites? What Log shows verbose information? PowerShell?
Note to Product Group and MVPs who have influence to Product Group:
please add column in Boundaries view to show actual Domain for Active Directory Boundaries (not using Description Column)
please allow to manually create Active Directory Boundaries from not native domains
Regards,

As mentioned, simply type in the site name instead of using the Browse button.
Site lookups are a simple string comparison that occurs when the client submits the content location or site assignment request to the MP.
If you don't have multiple primary sites, site assignment is not anything to worry about because all the clients will belong to the same site.
If you do have multiple primary sites, it gets a bit more complicated depending upon how those multiple sites are broken down client-wise but would most likely come down to not relying on auto-site assignment so this would be N/A anyway.
For content location, the assumption is that the like-named sites are for the same area of connectivity and thus content-location, i.e., DP "assignment", should be the same regardless of domain/forest. If this is not a valid assumption for your
environment, then I would submit that your site naming convention is irrational.
Jason | http://blog.configmgrftw.com | @jasonsandys

Error while creating a user in Active Directory.

Hi Guys,
I am creating a custom connector for AD and Exchnage , I am able to create user in AD using my Java Code... but i am also getting below error, I want to finish the operation smoothly.... Please find below error logs.
13:51:15,635 ERROR [STDERR] Data AccessException:
13:51:15,636 ERROR [STDERR] com.thortech.xl.orb.dataaccess.tcDataAccessException: DB_READ_FAILEDDetail: SQL: select UD_AD_CHILD_GRP_NAME from UD_AD_CHILD where UD_AD_CHILD_KEY = Description: ORA-00936: missing expression
SQL State: 42000Vendor Code: 936Additional Debug Info:com.thortech.xl.orb.dataaccess.tcDataAccessException
at com.thortech.xl.dataaccess.tcDataAccessExceptionUtil.createException(Unknown Source)
at com.thortech.xl.dataaccess.tcDataBase.createException(Unknown Source)
at com.thortech.xl.dataaccess.tcDataBase.readPartialStatement(Unknown Source)
at com.thortech.xl.dataobj.tcDataBase.readPartialStatement(Unknown Source)
at com.thortech.xl.dataaccess.tcDataSet.executeQuery(Unknown Source)
at com.thortech.xl.dataobj.tcDataSet.executeQuery(Unknown Source)
at com.thortech.xl.dataaccess.tcDataSet.executeQuery(Unknown Source)
at com.thortech.xl.dataobj.tcDataSet.executeQuery(Unknown Source)
at com.thortech.xl.adapterfactory.events.tcAdpEvent.getChildTableFieldValue(Unknown Source)
at com.thortech.xl.adapterfactory.events.tcAdpEvent.getRunTimeValue(Unknown Source)
at com.thortech.xl.adapterfactory.events.tcAdpEvent.getRunTimeValue(Unknown Source)
at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpADDUSERTOADGROUP.implementation(adpADDUSERTOADGROUP.java:49)
at com.thortech.xl.client.events.tcBaseEvent.run(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.runEvent(Unknown Source)
at com.thortech.xl.dataobj.tcScheduleItem.runMilestoneEvent(Unknown Source)
at com.thortech.xl.dataobj.tcScheduleItem.eventPostInsert(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
at com.thortech.xl.dataobj.tcScheduleItem.insertResponseMilestones(Unknown Source)
at com.thortech.xl.dataobj.tcScheduleItem.eventPostUpdate(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.update(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
at com.thortech.xl.adapterfactory.events.tcAdpEvent.updateSchItem(Unknown Source)
at com.thortech.xl.adapterfactory.events.tcAdpEvent.finalizeProcessAdapter(Unknown Source)
at com.thortech.xl.adapterfactory.events.tcAdpEvent.finalizeAdapter(Unknown Source)
at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpCREATEADUSER.implementation(adpCREATEADUSER.java:85)
at com.thortech.xl.client.events.tcBaseEvent.run(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.runEvent(Unknown Source)
at com.thortech.xl.dataobj.tcScheduleItem.runMilestoneEvent(Unknown Source)
at com.thortech.xl.dataobj.tcScheduleItem.eventPostInsert(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
at com.thortech.xl.dataobj.tcORC.insertNonConditionalMilestones(Unknown Source)
at com.thortech.xl.dataobj.tcORC.completeSystemValidationMilestone(Unknown Source)
at com.thortech.xl.dataobj.tcOrderItemInfo.completeCarrierBaseMilestone(Unknown Source)
at com.thortech.xl.dataobj.tcOrderItemInfo.eventPostInsert(Unknown Source)
at com.thortech.xl.dataobj.tcUDProcess.eventPostInsert(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
at com.thortech.xl.dataobj.tcTableDataObj.save(Unknown Source)
at com.thortech.xl.ejb.beansimpl.tcFormInstanceOperationsBean.setProcessFormData(Unknown Source)
at com.thortech.xl.ejb.beansimpl.tcFormInstanceOperationsBean.setProcessFormData(Unknown Source)
at com.thortech.xl.ejb.beans.tcFormInstanceOperationsSession.setProcessFormData(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.jboss.invocation.Invocation.performCall(Invocation.java:359)
at org.jboss.ejb.StatelessSessionContainer$ContainerInterceptor.invoke(StatelessSessionContainer.java:237)
at org.jboss.resource.connectionmanager.CachedConnectionInterceptor.invoke(CachedConnectionInterceptor.java:158)
at org.jboss.ejb.plugins.StatelessSessionInstanceInterceptor.invoke(StatelessSessionInstanceInterceptor.java:169)
at org.jboss.ejb.plugins.CallValidationInterceptor.invoke(CallValidationInterceptor.java:63)
at org.jboss.ejb.plugins.AbstractTxInterceptor.invokeNext(AbstractTxInterceptor.java:121)
at org.jboss.ejb.plugins.TxInterceptorCMT.runWithTransactions(TxInterceptorCMT.java:350)
at org.jboss.ejb.plugins.TxInterceptorCMT.invoke(TxInterceptorCMT.java:181)
at org.jboss.ejb.plugins.SecurityInterceptor.invoke(SecurityInterceptor.java:168)
at org.jboss.ejb.plugins.LogInterceptor.invoke(LogInterceptor.java:205)
at org.jboss.ejb.plugins.ProxyFactoryFinderInterceptor.invoke(ProxyFactoryFinderInterceptor.java:138)
at org.jboss.ejb.SessionContainer.internalInvoke(SessionContainer.java:648)
at org.jboss.ejb.Container.invoke(Container.java:960)
at sun.reflect.GeneratedMethodAccessor135.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.jboss.mx.interceptor.ReflectedDispatcher.invoke(ReflectedDispatcher.java:155)
at org.jboss.mx.server.Invocation.dispatch(Invocation.java:94)
at org.jboss.mx.server.Invocation.invoke(Invocation.java:86)
at org.jboss.mx.server.AbstractMBeanInvoker.invoke(AbstractMBeanInvoker.java:264)
at org.jboss.mx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:659)
at org.jboss.invocation.local.LocalInvoker$MBeanServerAction.invoke(LocalInvoker.java:169)
at org.jboss.invocation.local.LocalInvoker.invoke(LocalInvoker.java:118)
at org.jboss.invocation.InvokerInterceptor.invokeLocal(InvokerInterceptor.java:209)
at org.jboss.invocation.InvokerInterceptor.invoke(InvokerInterceptor.java:195)
at org.jboss.proxy.TransactionInterceptor.invoke(TransactionInterceptor.java:61)
at org.jboss.proxy.SecurityInterceptor.invoke(SecurityInterceptor.java:70)
at org.jboss.proxy.ejb.StatelessSessionInterceptor.invoke(StatelessSessionInterceptor.java:112)
at org.jboss.proxy.ClientContainer.invoke(ClientContainer.java:100)
at $Proxy758.setProcessFormData(Unknown Source)
at Thor.API.Operations.tcFormInstanceOperationsClient.setProcessFormData(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at Thor.API.Base.SecurityInvocationHandler$1.run(Unknown Source)
at Thor.API.Security.LoginHandler.jbossLoginSession.runAs(Unknown Source)
at Thor.API.Base.SecurityInvocationHandler.invoke(Unknown Source)
at $Proxy803.setProcessFormData(Unknown Source)
at com.thortech.xl.webclient.actions.DirectProvisionUserAction.handleVerifyProcessData(Unknown Source)
at com.thortech.xl.webclient.actions.DirectProvisionUserAction.goNext(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.struts.actions.DispatchAction.dispatchMethod(DispatchAction.java:280)
at com.thortech.xl.webclient.actions.tcLookupDispatchAction.execute(Unknown Source)
at com.thortech.xl.webclient.actions.tcActionBase.execute(Unknown Source)
at com.thortech.xl.webclient.actions.tcAction.execute(Unknown Source)
at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:710)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at com.thortech.xl.webclient.security.SecurityFilter.doFilter(Unknown Source)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:96)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:230)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:175)
at org.jboss.web.tomcat.security.SecurityAssociationValve.invoke(SecurityAssociationValve.java:182)
at org.jboss.web.tomcat.security.JaccContextValve.invoke(JaccContextValve.java:84)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
at org.jboss.web.tomcat.service.jca.CachedConnectionValve.invoke(CachedConnectionValve.java:157)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:262)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:844)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:583)
at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:446)
at java.lang.Thread.run(Thread.java:619)
Thanks,
Hemant

at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpADDUSERTOADGROUP.implementation(adpADDUSERTOADGROUP.java:49)
This is definitely a Custom Adapter because OOTB Adapter name is adpADCSADDUSERTOGROUP and NOT adpADDUSERTOADGROUP
So, it is your custom code and in the code you are passing incorrect value of the Active Directory Child process form...
The correct name is UD_ADUSRC and the Group Name column name is UD_ADUSRC_GROUPNAME.
While you are passing UD_AD_CHILD as the child process form and UD_AD_CHILD_GRP_NAME as Group Name column name..
Use OOTB Adapter... Correct these discrepancies... Your addition of group will work
And since you are creating custom adapter, you need to be more careful and remain consistent throughout..
Then if you want to use UD_AD_CHILD_GRP_NAME, use it everywhere consistently... Pass only this value in the adapter...
And even in lookups, if any... Search everywhere... Keep things consistent... They will work... Because good news is that you are able to create user in AD via Java Code...
And if any post is even slightly helpful, it is a good habit to mark it with helpful or correct ... And also mark the entire question as answered so that other people also are benefited.

How do I create Local Network Home Folders for Users from an Active Directory binding?

My situation is this... I run an iMac lab at my school. I have a server set up to manage the network user accounts in the lab. Currently, I can sucessfully create Local Network Users and log in to them from any of the iMacs. My school has an Active Directory set up for all the students on campus. What I'd like to be able to do is configure the server to allow the students to use their user names and passwords from their school accounts to log in to the iMacs and have it automatically build a network user folder on the server for them to use during the lab.
So far, I have been able to configure access for the Active Directory accounts to use the services on the server, mainly File Sharing, but I cannot figure out how to allow them to log into a user account on the client's machines using their same Active Directory credentials. I have even attempted to allow the user accounts to create mobile accounts, but that's not working out either. Entering indivual network user accounts into the server for every student every semester will be a nightmare. I'm sure there's a way to do it automatically using the exisitng Active Directory structure.
The live server is running 10.8.5 Server still, but I've also got a clone running OS X Server in case it matters. Please help!

ok reinstalled everything dns seems to be working have done sudo changeip -checkhostname and it says that both names match but then i started open directory and can't seem to get Kerberos started, i've tried changing it to stand alone then back again but it does nothing. I'm wondering why this would happen? i've tried adding a kerberos record but it doesn't do it just does nothing so i don't know what i'm doing wrong. I wondered if it might be a problem with the two network cards and dns as on ethernet one it is getting the dns name xserve.xxxx.ac.uk (which matches what the college server wants to call us) but on ethernet 2 gets xserve-2.local because it tells me that it already exists on ethernet one and renames it to this. I need to set up NAT so have ethernet coming in on port one and out again on port two. I wonder if my dns is backwards as its got the 192. address the NAT uses but its linked to the ethernet port one dns maybe this is the problem. would this cause open directory not to start kerberos?

Create a new group in Active Directory ?

Hello,
I'd like to create a new group in Active Directory. Can somebody show me a sample code please ?
Thanks.

Someone should show you how to perform a search. There's a sample in this forum.
http://forums.sun.com/thread.jspa?threadID=623860

How to create a disabled account in Active Directory?

Hi all,
I got the assignment to create AD accounts as soon as a new employee is entered into the hr system, which might be several weeks before their contract actually starts. Therefore the account should be disabled until the start of their contract and be enabled then.
Now, I tried a very simple approach and set accounts[Active Directory].disable=true during active sync when creating the account. According to the audit-entries, the value is set correctly, but my AD just doesn't bother. The account is created but not disabled. :-(
What can I do? The workflow so far was just "start -> provision -> end" and I tried to change it to "start -> provision -> disable ->end" with a new action like this:
<Activity id='4' name='Disable AD'>
<Action id='0' application='com.waveset.session.WorkflowServices'>
<Argument name='op' value='checkoutView'/>
<Argument name='type' value='Disable'/>
<Argument name='id' value='$(user.waveset.accountId)'/>
<Argument name='authorized' value='true'/>
</Action>
<Action id='1'>
<setvar name='view.resourceAccounts.currentResourceAccounts[AD].selected'>
<Boolean>true</Boolean>
</setvar>
<setvar name='view.resourceAccounts.currentResourceAccounts[AD].disabled'>
<Boolean>true</Boolean>
</setvar>
</Action>
<Action id='0' application='com.waveset.session.WorkflowServices'>
<Argument name='op' value='commitView'/>
<Argument name='view' value='$(view)'/>
</Action>
<Action id='2' process='Provision'>
<Argument name='op' value='provision'/>
</Action>
<Transition to='end'/>
<WorkflowEditor x='736' y='192'/>
</Activity>
However, there is no success. Probably I got some basic misunderstanding, since provision does not seem to complete when the workflow changes from provision to disable?
Any help woud be greatly appreciated.
CU,
Patrick.

You need to use DisableViewer view.
Check following code.
<Action id='0' application='com.waveset.session.WorkflowServices'>
<Argument name='op' value='checkoutView'/>
<Argument name='type' value='DisableViewer'/>
<Argument name='id' value='$(userId)'/>
<Argument name='Form' value='Empty Form'/>
<Return from='view' to='disableView'/>
</Action>
Regards,
MK

Creating a windows user in Active Directory

I am trying to create a user in Active Directory that can log on as any other Windows user, but when I try to log into Windows, I get the following error message:
"The local policy of this system does not allow you to logon interactively".
Are there any attributes or objectclass settings that must be set for the user to allow interactive logons?
Thanks in advance!

This has nothing to do with JNDI, the object class or attributes.
I assume that you are trying to logon locally to the domain controller with the new user that you have just created.
By default, the domain controller's policy only allows specific users or members of a group to logon locally at the domain domain controller's console.
Either edit the domain controller'sgroup policy and add your newly created user to the list of users permitted to logon locally, or add the user to a group which has already been granted permission to logon locally.

Need Help creating new user in Active Directory

I am trying to create a new user in active directory via a java application. I have included the code that I am using. I am able to successfully bind to Active Directory. I have been able to change passwords, and delete users, but I have not been able to create a user.
ldapHost : "mta101.DOM101.CEL.ACC.AF.MIL"
domainName: "dc=dom101,dc=cel,dc=acc,dc=af,dc=mil"
existing account: CN=Brett K. Humpherys,OU=Users,OU=CEL
I get the following error on the createSubcontext statement:
javax.naming.directory.InvalidAttributeValueException: [LDAP: error code 21 - 00000057: LdapErr: DSID-0C09098B, comment: Error in attribute conversion operation, data 0, v893 ; remaining name 'CN=test1,OU=Users,OU=CEL'
I have commented out the password portion and change the ObjectCategory to a 32 and get the same error.
    public GblStatus createAccount7(DbaDb dbConn,
                                    String jsrcName,
                                    String personName,
                                    String username,
                                    String password)
      Hashtable ldapEnv = new Hashtable(11);
      ldapEnv.put(Context.INITIAL_CONTEXT_FACTORY, "com.sun.jndi.ldap.LdapCtxFactory");
      ldapEnv.put(Context.PROVIDER_URL, "ldap://" + this.ldapHost + ":636");
      ldapEnv.put(Context.SECURITY_AUTHENTICATION, "simple");
      ldapEnv.put(Context.SECURITY_PROTOCOL, "ssl");
      ldapEnv.put(Context.REFERRAL, "ignore");
      ldapEnv.put(Context.SECURITY_PRINCIPAL,"cn=" + this.adminAcct + ",cn=users," + this.domainName);
      ldapEnv.put(Context.SECURITY_CREDENTIALS, this.adminPwd);
       try
        // Create the initial context
        DirContext ctx = new InitialDirContext(ldapEnv);
        BasicAttributes attrs = new BasicAttributes();
        BasicAttribute ocs = new BasicAttribute("objectclass");
        ocs.add("top");
        ocs.add("person");
        ocs.add("organizationalPerson");
        ocs.add("user");
        attrs.put(ocs);
        BasicAttribute gn = new BasicAttribute("givenName", "test1");
        attrs.put(gn);
        BasicAttribute sn = new BasicAttribute("sn", "");
        attrs.put(sn);
        BasicAttribute cn = new BasicAttribute("cn", "test1");
        attrs.put(cn);
        BasicAttribute uac = new BasicAttribute("userAccountControl", "66048");
        attrs.put(uac);
        BasicAttribute sam = new BasicAttribute("sAMAccountName", "test1");
        attrs.put(sam);
        BasicAttribute disName = new BasicAttribute("displayName", "test1");
        attrs.put(disName);
        BasicAttribute userPrincipalName = new BasicAttribute
                                      ("userPrincipalName", "[email protected]");
        attrs.put(userPrincipalName);
        BasicAttribute instanceType = new BasicAttribute("instanceType", "4");
        attrs.put(instanceType);
        BasicAttribute objectCategory = new BasicAttribute
                  ("objectCategory","CN=User,CN=Schema,CN=Configuration," + domainName);
        attrs.put(objectCategory);
        String newVal = new String("\"password\"");
        byte _bytes[] = newVal.getBytes("Unicode");
byte bytes[] = new byte[_bytes.length - 2];
System.arraycopy(_bytes, 2, bytes, 0, _bytes.length - 2);
BasicAttribute attribute = new BasicAttribute("unicodePwd");
attribute.add((byte[]) bytes);
attrs.put(attribute);
ctx.createSubcontext("CN=test1,OU=Users,OU=CEL", attrs);
ctx.close();
catch (NameAlreadyBoundException nex)
System.out.println("User ID is already in use, please select a different user ID ...");
catch (Exception ex)
System.out.println("Failed to create user account... Please verify the user information...");
ex.printStackTrace();
return new GblStatus();
Any help would be much appreciated.

Hi .,
me too got up with same problem., can anyone help me.??
Someone help me to create attributes in AD using LDAP
package LDAPpack;
import javax.naming.*;
import javax.naming.directory.*;
import javax.naming.ldap.InitialLdapContext;
import javax.naming.ldap.LdapContext;
import java.util.Hashtable;
class CreateAttrs {
public static void main(String[] args) {
     Hashtable env = new Hashtable();
          env.put(Context.INITIAL_CONTEXT_FACTORY,"com.sun.jndi.ldap.LdapCtxFactory");
          env.put(Context.PROVIDER_URL, "ldap://10.242.6.166:389/");
          env.put(Context.SECURITY_AUTHENTICATION,"simple");
          env.put(Context.SECURITY_PRINCIPAL, "CN=cname,OU=Users,OU=Dealer,OU=Community,DC=test2,DC=org");
                    env.put(Context.SECURITY_CREDENTIALS, "password-1");
          LdapContext ctx =null;
          try {
               //ctx = new InitialLdapContext(env,null);
               try {
ctx = new InitialLdapContext(env,null);
               catch(NamingException e) {
System.out.println("Login failed");
System.exit(0);
if(ctx!=null){
System.out.println("Login Successful");
byte[] buf = new byte[] {0, 1, 2, 3, 4, 5, 6, 7}; // same data
     // Create a multivalued attribute with 4 String values
     BasicAttribute oc = new BasicAttribute("objectClassNew", "topNew");
     oc.add("personNew");
     oc.add("organizationalPersonNew");
     // Create an attribute with a byte array
     BasicAttribute photo = new BasicAttribute("jpegPhotoNew", buf);
     // Create attribute set
     BasicAttributes attrs = new BasicAttributes(true);
     attrs.put(oc);
     attrs.put(photo);
     Attributes attrs1 = ctx.getAttributes("CN=cname,OU=Users,OU=Dealer,OU=Community,DC=test2,DC=org");
System.out.println(attrs1);
Context result = ctx.createSubcontext("CN=cname,OU=Users,OU=Dealer,OU=Community,DC=test2,DC=org", attrs);
//i got error here; i attach the error below.
     ctx.close();
System.out.println("close");
     catch(NamingException e){
          e.printStackTrace();
ERROR:
Login Successful
javax.naming.directory.NoSuchAttributeException: [LDAP: error code 16 - 00000057: LdapErr: DSID-0C090B38, comment: Error in attribute conversion operation, data 0, vece
ANYONE HELP ME PLS.
Edited by: vencer on Jun 19, 2008 12:38 AM

Creating Active directory

Similar Messages

Maybe you are looking for