Creating ALV view system-level assignment

Hi!
When I press "Save as.." in the settings window of an ALV, I can only save the view with assignment "User".
But I want to create system view available to all users. Like views with "/view_name" in usual ALV.
Is it possible to create such view and make it default to all users?

Just run the application in Administrative Mode (Assuming you have the correct authorizations to do so). From SE80 you can do this if you double click on the Web Dynpro Application to bring up the Application Edit. Then choose Web Dynpro Application->Test->Execute in Administrative Mode From the top level menu bar. You can also use the URL parameter sap-config-mode=X.
When you save the variant you will be saving a global one and will have the option to place your variant in a transport.

Similar Messages

Error in creating a view for an assignment block

Hello All,
I am trying to create an assignment block in web UI using links below.
http://weblogs.sdn.sap.com/cs/mobile/view/wlg/21034?x-topic=89 -- to create a table and corresponding BOL entity.
http://wiki.sdn.sap.com/wiki/display/CRM/CRMWebUITechnical-CreatingTableViewInWebUI u2013 to create an assignment block
When I try to create an assignment block in CPG_MAIN, I am unable to find my zorder_so BOL entity. Any pointers would be of great help.
Edited by: chandrakantklk on Jul 21, 2011 10:20 AM

Unfortunately I did not see anything in this note that would help it appeared to be talking about IM and QM.
I do agree there is some inconsistencies and I am just not sure where....None of this makes any sense as I said one day it will work and then the next time you try it, it gives the error message....I am so at a lost at this point...

Creating Materialized View in Toad

As with every new endeavor - come new questions.
I am trying to create a materialized view via toad (first time doing this). Now - toad is great, since it provides a kind-of wizard interface. Hence, one doesn't have to completely code in the create statement, with all of the options, etc.
Instead, in toad, one can (via the schema browser), go into the Materialized Views tab and click on create new. This opens a window with 6 tabs: Basic Info, Refresh Info, Physical Attributes, Query, Partitions & Subpartition Template.
In the Basic Info, one can put a check mark next to some of the following options:
-Build Deffered
-Parallel
-Cache
-Logging
-Using index
-Allow updates
etc.
I have read that build deferred refers to whether or not you would like the view to be created automatically or to be deferred.
Anyways, I tried to find Toad documentation to explain each of the options in-detail. No success. Hence, am researching each part piece by piece.
But - here is my question:
In the Query tab, we are asked to specify a query. I am assuming that the query does not have to be a full query, beginning with CREATE MATERIALIZED VIEW mv_table1 REFRESH FAST etc...
Since in this 'wizard', we are providing the MV name at the top of the dialog box, we are checking the 'options' in the other tabs, etc.
And so, I assumed that the query should merely be a select query in the window mentioned above.
So I entered the following:
select * from table1@remote_db;
When I go to verify the syntax, I get the error message: ORA_00911: invalid character. It seems to be pointing to my db_link (remote_db). I have been using this link throughout many places, w/o any problems.
Has anyone created a MV in toad before? Any links to good toad documentation would be helpful as well.
Thanks.

(This is fun... ;))
For anyone endeavoring this in the future, below I have attached the prerequisites required in order to create a materialized view (can also be found @ http://download-uk.oracle.com/docs/cd/B14117_01/server.101/b10759/statements_6002.htm):
Prerequisites
The privileges required to create a materialized view should be granted directly rather than through a role.
To create a materialized view in your own schema:
You must have been granted the CREATE MATERIALIZED VIEW system privilege and either the CREATE TABLE or CREATE ANY TABLE system privilege.
You must also have access to any master tables of the materialized view that you do not own, either through a SELECT object privilege on each of the tables or through the SELECT ANY TABLE system privilege.
To create a materialized view in another user's schema:
You must have the CREATE ANY MATERIALIZED VIEW system privilege.
The owner of the materialized view must have the CREATE TABLE system privilege. The owner must also have access to any master tables of the materialized view that the schema owner does not own (for example, if the master tables are on a remote database) and to any materialized view logs defined on those master tables, either through a SELECT object privilege on each of the tables or through the SELECT ANY TABLE system privilege.
To create a refresh-on-commit materialized view (ON COMMIT REFRESH clause), in addition to the preceding privileges, you must have the ON COMMIT REFRESH object privilege on any master tables that you do not own or you must have the ON COMMIT REFRESH system privilege.
To create the materialized view with query rewrite enabled, in addition to the preceding privileges:
If the schema owner does not own the master tables, then the schema owner must have the GLOBAL QUERY REWRITE privilege or the QUERY REWRITE object privilege on each table outside the schema.
If you are defining the materialized view on a prebuilt container (ON PREBUILT TABLE clause), then you must have the SELECT privilege WITH GRANT OPTION on the container table.
The user whose schema contains the materialized view must have sufficient quota in the target tablespace to store the master table and index of the materialized view or must have the UNLIMITED TABLESPACE system privilege.
When you create a materialized view, Oracle Database creates one internal table and at least one index, and may create one view, all in the schema of the materialized view. Oracle Database uses these objects to maintain the materialized view data. You must have the privileges necessary to create these objects.

Unable to create New Business System

Hi
I Installed XI 3.0 and configuring as per the configuration guide.
When I try to create Business System (SLD) I get the following error message.
"Integration Server already defined There is already an integration server defined for the selected technical system. Please select role Application System."
Steps:
Logon on to SLD
Click on New Business System
Name: XID and click on Next
Technical System Type: Web AS for ABAP
Select System: XID on Hostname   and select Client
Installed products: Choose all and click Nextt
Integration Server:
Business System Role: Integration Server
Pipeline url: http://HOST:PORT/sap/xi/engine/entry?action=execute
Initially I created Business System with wrong Name (P01) . I deleted it and try to recreate with new name (XID) I get the above error.
How to create a Business system and assign the role of Integration Server?
Thanks for the Help
Raghu

Hi RG,
      Once we had   same error ,due to some reason business system with role integration server deleted.
       It has been resolved by deleting XI technical system and recreating same after that it allows to define new bussiness system with role as integration server .
It might help you.
Regards
Santosh

System Error in creating a view.

Hello Friends,
I am getting the following error, when I create a view in a component.
Service cannot be reached
What has happened?
URL http://sapdev01:8001/sap/bc/wdvd call was terminated because the corresponding service is not available.
Note
The termination occurred in system DEV with error code 403 and for the reason Forbidden.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:sapdev01_DEV_01-v:0-s:403-r:Forbidden
HTTP 403 - Forbidden
Your SAP Internet Communication Framework Team
Thank you for your time.
Cheers,
Sam

Sam,
This is because the HTTP Service for the parcitular service you are trying to use is not actived.
1. Go to Transaction SICF
2. Click Execute
Then you need to navigate to the correct service... based on the error url that you provided http://sapdev01:8001/sap/bc/wdvd, you would
3. Navigate to default_host/sap/bc/wdvd. Highlight wdvd then go to Service/Host --> Activate (Shift + F11)
4. Try again!
Best.
Ryan

When i try to create Filter on aggregation level the system gives me error

Hi BI Guru's,
I am facing a problem BI - IP .
When i try to create Filter on aggregation level the system gives me follwoing error.
"Authorization check of component failed"
"You do not have authorisation for Add or Create".
"Could not create Filter "
Please let me know if have any solution for this
Thanks & Regards,
Nilesh Labde

Here are list of auth objects for BI IP
S_RS_ALVL --> aggregation levels
S_RS_PLSE -->planning functions
S_RS_PLSQ-->planning sequences
S_RS_PLST-->planning function types
S_RS_PLENQ-->maintain and display lock settings
Authorization templates for Integrated planning are
S_RS_PL_ADMIN
S_RS_PL_PLANNER
S_RS_PL_PLANMOD_D----
> Planning modeler(Dev System)
A portal role is required to use the planning modeler.

How to Create a View of a Query and assign it into my web template?

Hi All,
I need to create 3 views for my query and show that on my web template. I have never done this before. Can you please let me know step-by step procedure to create views for a query and how to show it on my WAD report?
Thanks,
Satyam

Hi Satyam,
Include the Dropdown Box web item in your web template. In the Web Item Parameters tab, select the Data Binding type as Query View Selection. Assign the Dataprovider from Selection of Query Views button below the Data Binding Type. You also have the option to Display Specific list of Query Views or all views based on that Query. For this you have to choose Selection of Query Views button. Here you can turn on Specific List of Query Views checkbox and select the Views depending on your requirement.
Regards,
Hari.
Edited by: Hari Krishnan K on Aug 18, 2010 2:33 PM

Insufficient Privileges when create materialized view as user system

If I login as system (connect sys/****@DevDB) and try to create a materialized view for another schema (e.g. XDCONTROLDB), I get the insufficient privileges error. If I login as sys as sysdba then I can create successfully.
I have searched some ariticles in Google and grant create any snapshot, create any table, create any view, global query rewrite, select any table system privileges to system but still get the same error.
Any other privileges I need to grant to system?
Cheers
below is a sample script to create the view which get the error:
CREATE MATERIALIZED VIEW XDControlDB."XDTest1" PCTFREE 10
PCTUSED 0 MAXTRANS 255
STORAGE ( INITIAL 64K NEXT 0K MINEXTENTS 1 MAXEXTENTS
2147483645 PCTINCREASE 0)
TABLESPACE "USERS"
BUILD IMMEDIATE
REFRESH COMPLETE START WITH sysdate NEXT sysdate + 1/24
ENABLE QUERY REWRITE AS
SELECT * From XDControlDB.RiskInstance;
Message was edited by:
user500168
Message was edited by:
user500168

Thanks for your reply. After I grant privileges to system, I login as system and try to create the view as below which I get the insufficient privileges error:
CREATE MATERIALIZED VIEW XDControlDB."XDTest1" PCTFREE 10
PCTUSED 0 MAXTRANS 255
STORAGE ( INITIAL 64K NEXT 0K MINEXTENTS 1 MAXEXTENTS
2147483645 PCTINCREASE 0)
TABLESPACE "USERS"
BUILD IMMEDIATE
REFRESH COMPLETE START WITH sysdate NEXT sysdate + 1/24
ENABLE QUERY REWRITE AS
SELECT 1 From XDControlDB.RiskInstance;
As you can see, I try to create the view under a schema called 'XDCONTROLDB'. If I login as sys as sysdba, then it create successfully.
After I create UserA, and grant the privileges I mentioned in the ealier post, I login as UserA, and run the statement above I get the same privileges error. But if I change the stament to below which will create the view under UserA's schema, then it create successfully:
CREATE MATERIALIZED VIEW UserA."XDTest1" PCTFREE 10
PCTUSED 0 MAXTRANS 255
STORAGE ( INITIAL 64K NEXT 0K MINEXTENTS 1 MAXEXTENTS
2147483645 PCTINCREASE 0)
TABLESPACE "USERS"
BUILD IMMEDIATE
REFRESH COMPLETE START WITH sysdate NEXT sysdate + 1/24
ENABLE QUERY REWRITE AS
SELECT 1 From XDControlDB.RiskInstance;
Looking for your suggestions,
Cheers

Admin Level Personalization to create seeded views failing

Hi,
I have a custom page, let me call it customPG.xml.
When I log in and access that page, there is a button that enables me to create user-level views for a table, and it works.
To create table view that is visible to all users, I go to functional admin and create seeded user views for the same table. For some reason, when I create a blank view from admin level personalization, it appears in the user screen views dropdown, but when the view is selected, no data shows up in the table.
When I duplicate this view at the user level, I can see the data in the table.
any reason why this is happening?
how can i overcome this?
thanks

Anand,
Thank you for the response.
I tried both Functional Admin and SYSADMIN and neither worked. What worked was - when on the personalizae page - select option 'Complete View' instead of the 'Simple View', then all 'Create Item' icons becone enabled!
Well - wonders never stop!
Regards
Anatoliy

Creating a View at Database level to be used in an another application

Posted - 01/20/2012 : 11:43:27
I have a table Named Customer_Distribution in which we store all the recepient information based on a request submitted by the customer.
Maximum number of recepients for a request is 3.So if a customer submits a request with 3 recepients the Customer_Distribution table will have 3 records inserted for the request as below
ReqNo recepientdesc recepientname recepientemail
1 R Abc [email protected]
1 U xyz [email protected]
1 S sap [email protected]
I'm trying to create a view and need help to create the view such that the entire Request Information is in a single row rather than multiple rows as we are trying to use this view in another application where it will be easy to retreive if the entire information is in a single row
The View should have the data in the below format
ReqNo desc1 name1 email1 desc2 name2 email2 desc3 name2 email2
1 R Abc [email protected] U Xyz [email protected] S sap [email protected]
Thanks

user12946819 wrote:
Hi
Would you be able to elaborate more on your response as i am new to oracle and have hard time using your response
Thanks
ME_XE?with
2     data as
3 (
4     select 1 as ReqNo, 'R' as recepientdesc, 'Abc' as recepientname, '[email protected]' as recepientemail      from dual union all
5     select 1 , 'U', 'xyz', '[email protected]'         from dual union all
6     select 1 , 'S', 'sap', '[email protected]'       from dual union all
7     select 2 , 'Q', 'me',   '[email protected]'        from dual
8 )
9 select
10     ReqNo,
11     max( decode( rn, 1, recepientdesc))     as desc1,
12     max( decode( rn, 2, recepientdesc))     as desc2,
13     max( decode( rn, 3, recepientdesc))     as desc3,
14     max( decode( rn, 1, recepientname))     as name1,
15     max( decode( rn, 2, recepientname))     as name2,
16     max( decode( rn, 3, recepientname))     as name3,
17     max( decode( rn, 1, recepientemail))    as email1,
18     max( decode( rn, 2, recepientemail))    as email2,
19     max( decode( rn, 3, recepientemail))    as email3
20 from
21 (
22     select
23             ReqNo, recepientdesc, recepientname, recepientemail,
24             row_number() over (partition by ReqNo order by recepientdesc asc) as rn
25     from data
26 )
27 group by ReqNo;
             REQNO DES DES DES NAME1     NAME2     NAME3     EMAIL1                                        EMAIL2                                        EMAIL3
                 1 R   S   U   Abc       sap       xyz       [email protected]                                 [email protected]                               [email protected]
                 2 Q           me                            [email protected]
2 rows selected.
Elapsed: 00:00:00.01
ME_XE?In the future, posting sample data in a format that someone can easily use (like i did above) will get you answers a lot quicker. I'm in a decently good mood this morning so i did it myself. 7 times out of 10 i'll skip over questions that don't make it easy for me to help. Just an FYI to help you in future posting.

Problem in creating a JDBC System on VC7.1 portal ( CE7.1 SP3)

I have a problem in creating a JDBC System on VC7.1 portal (CE7.1 SP3)
I get the following error:
Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the back-end application using the connector defined in this system object
Results
Default alias retrieved successfully
Connection failed. Make sure user mapping is set correctly and all connection properties are correct.
Could you please let me know if there are any guides on SAP Library; I was not able to find any documentation nor any threads discussing this on VC7.1
Although, I saw this thread Can Visual Composer talk to/connect to any Database?..
which says that VC7.1 can connect to SAP backend
and web services only, and there is no direct connection to the db.
Help needed please.

Hi Dharmi
Here is a quote of Dafna's post in [another thread in this forum|Re: Copy VC controls]
CE7.1.1 will be released at September 2008 for ramp-up customers.
There are many improvements and new capabilities in the new release of Visual Composer for CE7.1.1. Among the new features you can find:
The missing features from Visual Composer 7.0 (Html view, portal Eventing support (EPCM), JDBC, Undo/Redo, and more..)
Many layout & modeling improvements
Additional ALV table functionality - export to Excel, switch to chart, configure ALV behavior at design time
Integration of Visual Composer in Eclipse - additional entry point to the Visual Composer models from the NWDS. This integration provides the option to add a WD component (in case of missing functionality in Visual Composer), as a black box component to the Visual Composer model. Right-clicking the component will open the Web Dynpro perspective for creating/modifying the component.
Regards,
Shai

Creating a view on KONA & KONH - Failed with 'Field name DATAB not unique'

Hi all,
    I am creating a view on KONA (Rebate Agreement) & KONH (Conditions Header) tables. The link is KONA-KNUMA = KONH-KNUMA_AG.
   The field 'DATAB' exists in both tables and I have included those two fields under 'View Fields' . When I tried to activate the View, it fails with 'Field name DATAB not unique'.
   The following is the complete error message:
Message no. MC060
Diagnosis
When you define aggregates (views, lock objects or matchcode objects), you can assign the aggregate fields your own names (the system assigns names to the basic fields automatically). These names must be unique.
System response
The system has established that the names assigned to the aggregate fields in an aggregate definition are not unique and issues an error message.
Procedure
Assign unique names to the aggregate fields in question.
   Why I am not able to create the view after including a field that EXISTS in two tables, PLEASE ?
Thanks,
Venkat.

Hi,
you can include both fields (but what for??); most likely KNUMH will also complain after fixing DATAB (just a guess...).
You can include both fields if you name them differently (different aliases):
In the view fields tab, enter two different names in the column "view field".
this will work.
hope this helps...
Olivier.
Message was edited by:
        Olivier Cora

How to create second or third level of menu bar in se41 ?

Hi All
How to create second or third level of menu bar in se41 ?
I created it once but forgotten , do anybody remember ?
Regards
Jaman
Message was edited by:
ABAP Techie

Hi..,
Once you have created a menu bar, you enter the individual menu entries. Each menu can contain up to 15 entries.
A menu can contain any of the following:
Function names (with function code and text)
Submenus (pull-down menus)
Separators
You may include submenus up to three levels deep.
Menu functions that logically belong together are grouped together using separators. This makes the menu easier to use. Separators also make long menus easier to read by dividing them into smaller parts.
Defining Menu Functions
To add functions to a menu that is already open in the Menu Painter:
Open a menu list in the menu bar by double-clicking the menu title.
The system opens the menu. The menu entries list contains the two columns Code and Text.
In the Code column, enter a function code (this may be up to 20 characters long).
If you want to enter a function code that is longer than the input field, you must first change the displayed length of the field in the user settings. (Choose Utilities ® Settings ® User-specific.)
Enter the function text in the Text column.
The name you enter here appears in the menu at runtime. You can also determine the contents of function texts at runtime (see Defining Dynamic Function Texts).
Repeat steps 2 and 3 for each item in the menu.
Creating Cascading Menus
To add a cascading menu (sub-menu) to a menu:
Leave the Code column blank.
Enter a menu name in the Text column.
Double-click the cascading menu to open it.
The system opens the menu entry list for the cascading menu.
Complete the menu as you would any other.
Inserting Separators
Place the cursor on a line.
Choose Edit ® Insert ® Separator.
If you want to insert a separator between two existing menu entries, place the cursor on the line before which you want to insert the separator.
Editing Menu Entries
You can cut, copy, paste, and delete menu entries.
Place the cursor on a line.
Choose Edit ® Entry ® Cut (or Copy, or Paste, or Delete).
If you double-click a function code, the Function Attributes dialog box appears. Here you can, for example, change the icon assigned to a function.
regards,
sai ramesh

Creating Customized Views in bpm/workspace

Hi All,
I'm going to create a customized view in http://<host>:<port>/bpm/workspace ..
I was able to create one view for the first user and that Human task user are defined in the 'Organization' Lane Users.
Then next user comes based on the output of the first user.
Human task is created and and opened the <secondUser>.task file in bpm jdeveloper project and went to the 'Assignment' section and Edit the user as below,
Type - Single
Build a list of participants using - Names and Expressions
Add the user variable using Expression ..
Once I assigned to a task for a user(2nd Level) , I can see instance in his Inbox.
But not in his view. (Customized view.. )
Once I remove above configurations and assign the Lane Users it populates.
What will be the Problem ???
Where to assign the user and how can I populate tha customized view with this scenario??
Thanks,
nir
Any suggestions PLEASE ....
Edited by: Nir on May 14, 2013 9:38 PM

Hi 814056
Thanks for your reply..
Yes. The problem is all these users are belongs to same group but they should not see each others tasks.
i.e. Managing Directors of different subsidiaries in one organization.
They should not see each others tasks, but they are having same interface. Having separate groups for each SBU is impossible since we are having more than 50 subsidiaries.
Thanks,
Nir

While Creating PO its saying account assignment mandatory for the material.

Dear All
I have created a material with Mechanical Engineering as Industry sector and ROH as Material Type.
For this material i created PR and PO both the time it said account assignment is mandatory.
Why this happens?
I don't want to enter any account assignment category.
Pls help.
Regards
Depin

Hi,
Normally purchasing ROH with PO needn't to assign the account assignment category, but if don't create accounting view for the ROH material or create the accounting view without valuation class assigned, system can't find the relevant stock account automatically, so will issue the message just like "Account assignment is mandatory".
So you should check the material master data, if it's fine, then you will not see the message any more!
Good luck
Tao

Creating ALV view system-level assignment

Similar Messages

Maybe you are looking for