Creating an alert on CA Health Report - Bug

We are trying to configure email alerts on the Central Admin Health Report list in SharePoint 2013. We get the confirmation email when the alert is first created, but nothing when a new error or warning arrives in the list.
Sure enough, no 'job-immediate-alert' existed on the CA webapp, as determined by viewing the CA UI Job definition page and the following powershell: Get-SPTimerJob
| ? {$_.name -like "*alert*"}
To create the job on the CA webapp I followed the advice here.
Now I can see in the Job Definition page the ‘Immediate Alerts’ job. However, when I click to see
details about the job the Last run time is N/A.
I see the Immediate Alerts job scheduled in the Scheduled Jobs page, but the Job History page is empty. I have tried to start the job manually with Powershell with the following:
Add-PSSnapin "Microsoft.SharePoint.PowerShell" -ErrorAction SilentlyContinue
$th = Get-SPTimerJob -WebApplication http://spsite:2013 | ? {$_.name -like "*alert*"}
Start-SPTimerJob $th
No errors, but still the Last run time is N/A
Some users have said running the updatealerttemplates may help, so ran stsadm
-o updatealerttemplates -url http://spsite:2013 but the job still will not run. I restarted the Timer Service via Windows Services as well, but still no luck.
No errors in Event Viewer or ULS. The job just seems to refuse to run on the CA Webapp. Anyone have any suggestions? (Would rather not have to create a workflow just
for this – this should be simple, right?)
UPDATE: The servers restarted today, and the job-immediate-alerts timer job ran successfully TWICE on the SharePoint Central Administration v4 WebApp. After running twice,
something seems to prevent it from processing the job. Very strange.
Any thoughts? I would like to see if this is a bug that other users have experienced. Unfortunately there is no public listing of Sharepoint bugs, and to report a bug I need to pay for it by opening a support ticket... sweet...

As you said after reboot its works...
I would enable the verbose logging and check the ULS logs why its work and why it fail / not starting? Did anything change which trigger alerts or no change after 2 alerts?
By posting a question you already report this, as MSFT monitor this forum and someone from MSFT will respond on this.
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Similar Messages

Ora-20001 when creating a form on table with report (bug?)

Having some trouble creating a "Form on table with report".
1) I pick my table
2) take most of the defaults on the page where you pick the report type (interactive) and the page number (I changed it to 950). next->
3) Do not use tabs. Next->
4) Select all columns for the report. THEN (here's the problem) set an optional where clause of system_role_name like 'ODPSPOPUP%'. Next->
5) choose standard edit link. next->
6) Specify a page of 951 for the form (leave others defaults). next->
7) Set the form primary key (defined in table). next->
8) use existing trigger. next->
9) choose all columns for the form. next->
10) Leave actions to insert, update, delete. next->
11) Get to the summary page and click Finish
Then I get an error page saying:
ORA-20001: Unable to create query and update page. ORA-20001: Unable to create query and update page. ORA-00933: SQL command not properly ended
If I go back to step 4 and erase my where clause the wizard completes successfully.
Also if I change the report type in step 2 from the default of "Interactive" to "Classic" the wizard completes successfully. However upon running the report I get a query parse error. Looks like the where clause in the report sql is: system_role_name like ''ODPSPOPUP%'' (two single quotes on each side).
It looks as if you cannot specify a where clause with a quoted string. The wizard is expecting a bind variable.
Workaround(s):
1) Don't specify a where clause when report type = Interactive in "create form on table with report" wizard.
or
2) Specify a bogus where clause using bind variable syntax such as "system_role_name like :BOGUSVARIABLE". Then edit the report query once the wizard finishes and change the where clause to the constant string you wanted to use in the wizard (e.g. "system_role_name like 'MYSYSTEM%'")
Apex: 3.2.0.00.27
Database: Oracle Database 11g Enterprise Edition 11.1.0.7.0 64bit Production (Oracle EL5)

Andy,
It's a bug, all right. Thanks for the detailed problem description. We'll fix it when we can.
Scott

SP2013 Bug Report: Health Reports - You can only specify the READPAST lock in the READ COMMITTED or REPEATABLE READ isolation levels.

There appears to be an error when trying to view Health Reports from Central Administration. A simple fix within a SharePoint Stored Procedure fixes the problem. I get the error message "You can only specify the READPAST lock in the READ COMMITTED or
REPEATABLE READ isolation levels." when just trying to click "View Health Reports" --> Go in CA.
I have found the same problem in some blog posts which leads me to believe this is a bug:
Problems Viewing Health Reports in SharePoint 2013
From the blog post "I managed to work around it by altering the
proc_GetSlowestPages stored procedure and commenting out the
WITH (READPAST) line. "
This also worked for me. It would be great if a fix could be released for this problem as it seems to cause other problems as well (site analytics freezes).

Hi Dennis
Hope you had found the hotfix and installed it.
For the benefit of others who visit this thread SharePoint Server 2013 Client Components SDK hotfix package addresses this issue.http://support.microsoft.com/kb/2849962
Regards
Sriram.V

Auto-start services not running :Shell Hardware Detection in my Health Reports

Recently I've setup up Windows Server 2012 Essentials on my Custom-made Box. All is going well so far except that i have a warning in my generated Health Report such as
Auto-start Services Not Running Shell
Hardware Detection.
I had checked My Services and found out that this particular service is scheduled to start Automatically and it is always started...
Any Advice what might be the problem?

Susan, can you still see the Connect bug? What Product/Program is it under in Connect? I can't see it but I might not be a member of the correct group.
From http://technet.microsoft.com/en-us/library/hh831394.aspx:
"After a server has been added to the Server Manager server pool, service alerts about the Shell Hardware Detection service can be displayed if there are no users logged on to the managed server. This occurs because the Shell Hardware Detection service runs
only when users are logged on to the managed server, or connected to a Remote Desktop session on the managed server. To avoid seeing Shell Hardware Detection service alerts for this case, click
Services in the thumbnails for server groups, including the
All Servers group. In the Services Detail View dialog box, on the
Services drop-down list, clear the check box for Shell Hardware Detection, and then click
OK."
That confirms that it's okay for Shell Hardware Detection not to be running. However the suggested fix--removing it from 2012 alerting--does not keep it off my 2012E Health Report.
Mark Berry
MCB Systems

Calendar is creating unwanted Alerts

I use Calendar on iCloud across four devices: iMac, MacBookAir, iPad and iPhone. All running current (10.8.3; 6.1.3) OS.
Recently, Alerts are being added to my Calendar events on the iOS devices, and I don't know how this is occuring.
Example: Suppose I create a recurring event in Calendar on my iMac... to Get Up at 6 a.m. every day, and I make sure I don't create an alert. That event appears on my iMac with no alert.
However, when I open it on my iPad and iPhone, it has an alert: At time of event. Where did this come from?
I have checked that all default alerts are set to off in Calendar preferences on the computers, and also on the iOS devices in Settings -> Mail, Contacts, Calendars -> Calendars / Default, and also accessing iCloud preferences via Safari.
I have tried logging out of my iCloud account on both iOS devices, deleting everything, and signing on, and it does the same thing with every single event. It adds the alerts that I don't want.
Also intriguing, if I DO set an alert in a new event on the iMac, the event shows up on the iOS devices with TWO alerts.
This began out of the blue about two weeks ago, and I can't find a solution. I am getting a lot of alerts that I do not want.
Does anyone else have the same problem? ...And hopefully a solution?
Thanks in advance.

I'm having a similar problem. The Calendar app in iOS (iPhone 4S) is automatically setting for me a second alert for events that is nine hours after the event itself. I have not set any second alert as a default, and even if I did I wouldn't set the alert for nine hours later. Still, I changed my default alerts on Calendar in both iOS and OSX (Mountain Lion) to "none"; I have switched off iCloud sync for Calendar; and I have made sure my reminders in Google are also set to "none". I am still having the problem. I have visited my local Apple store. Unfortunately, the associate didn't understand why I was having the problem either and thus could offer no solution. The only thing that works is going into the Calendar app and manually deleting the second alert for each event, which isn't really a solution to the problem. I have sent a report into Apple about this, but I too welcome any advice.

How do I create an alert for a collection?

Hi,
I created a collection that queries computers with Endpoint definition files of 7 days and older. Now, I want an email alert daily what computers are in that collection. How do I do that?
Please give me some steps if possible because I am not familiar creating an alert.
If you have an alternate/easier way, my goal is to receive email alerts of computers with old Endpoint definiton files 7 days or older.
Thanks!

Hi Jeremy,
So I created a report and it shows under Subscriptions (just like how it was instructed). I also check Administration \ Site configuration \ Sites \ Configure Components \ Email notifications and tested, all is good.
I noticed that under "Report Delivered By: I only have "Windows File Share". No Deliver by Email option.
I see that the report ran as how I wanted it. The result was there but where is my email? Am I missing any more steps?
Thanks for your help in advance!

Need to create form on a table with report with a table has NO primary key

Hi, I tried to created some insert/update/delete form+report in an application, it works fine only if the table has primary key. Does anyone know how to create the same functionality with a table with no primary key? I saw an application is built on older version of htmldb that is using tables with no primary keys at all.
Here are the specific issues that I am facing:
- I am building some Form on a table with Report, it requires the table with primary key for form to update. Is there a workaround that I can use tables that has no primary keys at all?
- Say if primary key is necessary in the previous report+form, but the maximum number of columns that I can use to composed a primary is only 2 for that Form-Report, I cannot find anything handling > 2 primary key. Do you know if there are some ways to composite a primary key from many columns together?
Your help is really appreciated.
Thanks,
Angela

Sorry to ask response so late. I had no time to get back to that issue before.
Regarding the triggers, I can make it work for the update, but not the insert.
Here is my trigger:
create or replace trigger STATUS_T1
instead of insert on STATUS
begin
insert into STATUS ("LABEL", "AREA", "OWNER", "TEST_NAME", "STATUS", "REMARKS", "BUGS", "DEV_MGR", "TEST_BY_DATE")
values(:new.LABEL, :new.AREA, :new.OWNER, :new.TEST_NAME, :new.STATUS, :new.REMARKS, :new.BUGS, :new.DEV_MGR, :new.TEST_BY_DATE);
end;
by any chance, you can notify what is wrong?
I already skip the ROWID when inserting to the view STATUS, but I cannot figure out what is wrong when inserting a new record to that view.
It gave me the following errors:
ORA-06550: line 1, column 38: PL/SQL: ORA-00904: "ID": invalid identifier ORA-06550: line 1, column 7: PL/SQL: SQL Statement ignored
Error Unable to process row of table STATUS
Then, I turned to debug mode, I am thinking that maybe because I use a HIDDEN item to hold the value of ROW_ID as I use the rowid (called ID in the view) to retrieve the record as a column link from previous page. What do you think?
Thanks again,
Angela

Xcode ERROR: Failed to create an alert for ID "enabled" based on defaults: 1

I installed OX 10.8 and xcode 4.4 and when I run any simple application for simulator it generated error in console:
Xcode[7808]: ERROR: Failed to create an alert for ID "enabled" based on defaults: 1
I reinstalled with clean xcode, but it did not help. I see the building freeze when "coping 2 of 2 resources to product
Also, xcode freezes when I jusy click on Mainstoryboard.storyboard file.
I found a few posts with the same ERROR but no clear fix. Any help will be appriciated.

Hi, i had the same problem yesterday and after searching I found no solution to this error.
Today i just burned the original Mountain Lion.dmg to a portable hard driver then reinstall the OS. And it seemed that the os had been restored and the error had been fixed.
And, i guess there's some app that changes some documents of the system. So when you rewrite the os, u get the bug fixed.
Good luck to you guys.

Where do we report bugs?

We're all excited about the development of Flash Catalyst. It would be great if we could report bugs to help Adobe improve the quality and stability of the product.
Here are some ideas:
Create one thread for reporting all bugs, keep it at the top of the list.
Create a template for bug reporting, e.g.
Summary -- what happened
Steps to Reproduce -- what do you think caused the issue
Workaround -- tips for getting around this problem until it's fixed
Description -- error messages, etc., perhaps screenshots
Version/Build -- version number in which the issue was found
Adobe Forum Admins, please give us a bit more structure so we can provide you with more valuable feedback.Thanks.

Try here:
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

Create an Alert w/ Email?

Hi- newbie here.
I have a SQL query that identifies issue POs that need to be emailed to people to be fixed.
A report has been created using the query. However, we have determined that it would be best if the report could be scheduled to run nightly and the results emailed only when there is output.
How do I make this report run nightly, and then email people if it has results? I know how to create an alert now...but how do I make it so it only emails when I have a result in the SQL statement? Thanks!
Edited by: Jason ORCL on Feb 18, 2010 8:46 AM

Database version ? OS ? Do you have an smtp gateway ?
"PO" Is this Oracle EBusiness Suite, or another application ?
In Ebus you could use the Alert product. In another application you could use UTL_MAIL or UTL_SMTP called from a scheduled plsql package.

Create an alert using the currentime

Hi All,
How do i create an alert in CR9 using the current system/PC time. Thanks.

I don't have CR 9 installed any more since it's been out of support for a long time now but in CR 2008 click on Report Menu, Alert and use the wizard to create the formula. CR 2008 has a CurrentTime function which you then test against a value you enter.
I don't recall what CR 9 had for this functionality now, sorry...
Thank you
Don

How create mail alert without triggering the event.

1. SR 3-4924626351: How create mail alert without triggering the event.
We wanted to send alert mail every 10 days or 15 days or 1 month to a reporting manager of Opportunity Owner with details of that Opportunity. I don’t want to use any triggering of event like the Following. When new opportunity is created When modified Opportunity is saved etc.

Raju,
If you don't want to use the triggering event, you will have to do this manually.
Manually:
- Create a Web Link on the SR with and embed the mailto: function with the receivers email and subject and body embedded in the url (you can find this link on Google)
- When this link is clicked, an email window will open with all the details you provide, and you can click the send button to send the email.
- You will have to do this manually every 10-15 days or whatever is the duration
Auto:
- Create a time based workflow on a new Opportunity Created event
- create a action to send an email notification to the concerned person (details in the workflow properties)
- This workflow will auto send an email every 10-15 days to the opportunity Manager.
The time based workflow is the best option I see. Do you see any issue/ concerns with auto generated emails?
Hope this helps!
Royston

Authorization to Create the Alert Rules?

Hello All,
I created the Alert category in ALRTCATDEF transaction, now when i want to create the Alert rules in RWB.
Add Rule and Change Rule is in disable mode. my user have SAP_XI_ADMINISTRATOR authorization,
please tell me any other authorization role required to create the alert rules in RWB.
Thanks and Regards,
chinna

Hi,
Steps of alert configuration :
Prerequisites
The following prerequisites have to be met in order to use the Alert Management (ALM):
u2022 For using the Alert Inbox (BSP based display program of ALM), the corresponding service has to be activated in the service maintenance transaction SICF. Choose Default_host ® sap ® bc ® bsp ® sap ® alert inbox, and Activate in the context menu.
u2022 For customizing or administration of the Alert Management the corresponding authorization role has to be assigned. The end users do not need any additional authorization.
u2022 The central alert server must be maintained as an RFC destination in transaction SM59 in the local system. If there is no suitable user, you have to create a user for the RFC connection in the central alert system in transaction SU01. To make this RFC destination known as the RFC destination of the Alert Management System in the local system, the central alert server must also be selected as the RFC destination in transaction SALRT1 of the local system or in Settings ® RFC-Destination of Alert Server.
If the central alert server is running on the local system in the same client, you do not have to maintain an RFC destination. In this case, you can simply enter NONE in transaction SALRT1.
u2022 If external communication types, such as e-mail, SMS, and fax are used, these communication types must be correctly configured in SAPconnect, because the alerts are then sent from the central alert system via SAPconnect.
Process Flow
The following describes the process flow from alert configuration (transaction ALRTCATDEF) to alert display and confirmation (for example in the alert inbox transaction ALRTINBOX):
1. Optional: You can define alert classifications. These are useful to group alert categories. For example, you can create an alert classification CRM that contains alert categories referring to CRM. Alert classifications can now have subclassifications. This enables you to build up your own classification hierarchy. Especially, if you use the Alert Mangement (ALM) extensively, classification and subclassification help you to organize your ALM alert landscape and to have a clear overview.
2. For different types of alerts you have to define different categories. The category contains various properties and other specifications that define the alerts within that category, for example expiry date, or the escalation recipient. You can define an alert category to suit your business requirements and assign the category to the corresponding classification. For example, for the alert classification CRM you can create the alert categories Contract Cancelled and Decrease in Sales. When the critical situation defined in the alert category arises, the system recognizes this and sends an alert instance of this category to the recipients determined. The alerts can always be found in the display programs configured for the recipient (UWL, application-specific program, or alert inbox). Additionally, the alerts are sent via eventual external communication channels, such as e-mail, sms, or fax.
3. You have to determine recipients so that the Alert Management knows who the recipients of alerts of a particular category are and that the correct parties are informed.
4. You can configure the way how alerts are processed. For the general use of the Alert Management you do not have to change the default settings. However, if for example you want to send alerts to third-party systems, or to be able to confirm alerts by SMS/Internet mail, or to have logs written, then you have to configure alert processing.
5. There is a number of Alert Management administration reports that you must schedule according to your requirements. For example, report RSALERTPROC must be executed in order to enable escalation.
6. Alerts of a particular category must be triggered by an application at runtime. Triggering alerts can be done in various ways. You can call a function module directly or use middleware components that trigger alerts, such as the Business Object Repository (BOR), Post Processing Framework (PPF), SAP Workflow, or CCMS.
7. Recipients can view the alerts assigned to them in the UWL of Enteprise Portal, in application-specific display programs, or in the alert inbox. In addition, alerts can be received as e-mail, SMS, or fax, if these external communication channels are configured in SAPconnect.
8. If the problem causing the alert is solved by a recipient, the recipient can confirm the alert, this means its status is changed and it will not be delivered, escalated, or displayed anymore. Alerts are generally confirmed by the recipient in the display program, such as the UWL or Alert Inbox. However, if an alert is sent by Internet mail or SMS message, it is also possible to confirm it by sending an Internet mail or SMS message back to the SAP system. Alert Management uses inbound processing for this.
Refer these links :
Check these Usefull BLOGs also
/people/bhavesh.kantilal/blog/2006/07/25/triggering-xi-alerts-from-a-user-defined-function
/people/michal.krawczyk2/blog/2007/04/26/xipi-throwing-generic-exceptions-from-any-type-of-mapping
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step - Alert Configuration
I tried to format it..But Dunno why it's appearing this way...**
Edited by: Sainath Chutke on Aug 12, 2010 8:43 AM

Database Health report

Hi,
I am working on Oracle 10.2.0.4 and HP-UX .
i need to prepare one report showing database health on weekly basis for management .
This report can contain performance overview ..bottleneck ..high and low peeks etc..
This will be good if all data showing here will be in GUI , Graph format ..so easy to understand..
we have this type of templates available to create report..?
How to get data in report..?
Any idea..

Hi,
Database Health report can be obtain from my below link:
http://rafioracledba.blogspot.com/search/label/DBA%20Daily%20activities
It is a detailed one.Make use of point 20 in the above link to get the report you want.Hope it helps.
Best regards,
Rafi.
http://rafioracledba.blogspot.com

Error - Creating Data Alert SSRS SharePoint

I am getting the below error when I try to create a new data alert on a SSRS report which is integrated with SharePoint 2013. The database is SQL Server 2012.
When I go to the link given in the error window, I see the below statement.
"The definition of the resource ID could not be found.
This webpage provides developers with Silverlight exception message text, which can be useful in diagnosing failures and problems with Silverlight applications. Some exception strings contain tokens for additional information produced by your application.
To see these descriptive error messages on your local machine and obtain other debugging resources, please install the latest version of Silverlight for Developers on your
Windows or
Mac computer".

Hi John,
Appreciate for sharing the experience.
Regards,
Rebecca Tu
TechNet Community Support

Creating an alert on CA Health Report - Bug

Similar Messages

Maybe you are looking for