Creating an Envelope Mesh to a Symbol

I have created an envelope mesh to an object within a clipping mask and have made it into a symbol. The idea of this was to create a template where I can edit the symbol and have it automate the wrapping of the design using the envelope mesh. The problem that i am running into is when I edit the symbol and change out the pattern that is within a clipping mask... it will not render correctly on the envelope mesh due to the pattern size difference that is currently within a clipping mask.
Is there a way to have the envelope mesh render the size/shape of the actual clipping mask instead of pattern within the clipping mask? I am currently using CS6 Adobe Illustrator.

Create your symbol with a rectangle set to fill & stroke of none, and make the rectangle larger than your largest symbol. The will acts as a bounding box in your symbol so you can update and it will not resize.

Similar Messages

Envelope Mesh on a Symbol.

I have created an envelope mesh to an object within a clipping mask and have made it into a symbol. The idea of this was to create a template where I can edit the symbol and have it automate the wrapping of the design using the envelope mesh. The problem that I am running into is when I edit eh symbol and change out the pattern that is within a clipping mask... it will not render correctly on the envelope mesh due to the pattern size difference that is currently within the clipping mask. Is this a bug? Is there a way to have the envelope mesh render the size/shape of the actual clipping mask instead of the reading the dimensions of the pattern within the clipping mask?

Create your symbol with a rectangle set to fill & stroke of none, and make the rectangle larger than your largest symbol. The will acts as a bounding box in your symbol so you can update and it will not resize.

Way to return Released Envelope Mesh back to a normal Path?

If you use the Create Envelope from Top Shape feature, and then later Release the Envelope you at first appear to get your original shape back.
But it's actually an object called a Mesh. While you can apply Fills and Strokes to this released Mesh, there are some things you can't do with it.
Like setting the Stroke to Inside or Outside. You also can't use this Mesh with the Pathfinder Operations.
Is there a way to return a released Envelope Mesh back a normal path?

Somewhat hidden and not self-evident:
Go to Object > Path > Offset Path and take an offset value of zero.

How to create soap envelope structure

Hello Friends,
I am working on a RFC to webservice sync scenario.Here I am getting response from webservice in soap envelope form which is not matching with my wsdl response structure. I have tried to create the envelope structure manually but i dint get success. Can any body guide me how to over come with it.
(I have already checked 'Do not create soap envelop' in receiver soap addapter).
Regards,
jayesh.

Thanks Anupam and Jenny for your kind response.
I am wrking on PI 7.0. I dnt want soap envelope in payload so I have already checked the 'Do not create response' button still in response message I am getting the soap envelope.
I can use java or xslt but the the structure is not able to read the soap envelope. To read it I need to create same data structure which matches with the soap envelope.
this is the response I am getting through webservice.
<?xml version="1.0" encoding="UTF-8" ?>
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns="urn:enterprise.soap.sforce.com" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<soapenv:Body>
<createResponse>
<result>
<errors>
<message>Config Master Record Type Name value is missing</message>
<statusCode>FIELD_CUSTOM_VALIDATION_EXCEPTION</statusCode>
</errors>
<id xsi:nil="true" />
<success>false</success>
</result>
</createResponse>
</soapenv:Body>
</soapenv:Envelope>
And this is the wsdl structure
<?xml version="1.0" encoding="UTF-8"?>
<ns0:createResponse xmlns:ns0="urn:enterprise.soap.sforce.com">
   <ns0:result>
      <ns0:errors>
         <ns0:fields/>
         <ns0:message/>
         <ns0:statusCode/>
      </ns0:errors>
      <ns0:id/>
      <ns0:success/>
   </ns0:result>
</ns0:createResponse>
Because of the soap envelope it is not able to read it. I have to create new structure.
Experts please help me to solve this problem.
Regards,
Jayesh.

How To Create SOAP Envelop For WSDL

Hi Friends,
I have created one webservice WSDL and i want to create SOAP Envelop for this.
Can any one help me out how to create SOAP Envelop based on WSDL.
***************My WSDL***********************************
<?xml version="1.0" encoding="UTF-8" ?>
- 
- 
- <definitions xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:tns="http://annotation/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns="http://schemas.xmlsoap.org/wsdl/" targetNamespace="http://annotation/" name="MyCompanyWS">
- <types>
- <xsd:schema>
<xsd:import namespace="http://annotation/" schemaLocation="http://localhost:7101/WebService-Annotation-context-root/MyCompanyPort?xsd=1" />
</xsd:schema>
</types>
- <message name="setMyDepts">
<part name="parameters" element="tns:setMyDepts" />
</message>
- <message name="setMyDeptsResponse">
<part name="parameters" element="tns:setMyDeptsResponse" />
</message>
- <message name="getMyDepts">
<part name="parameters" element="tns:getMyDepts" />
</message>
- <message name="getMyDeptsResponse">
<part name="parameters" element="tns:getMyDeptsResponse" />
</message>
- <message name="addEmployeeToDept">
<part name="parameters" element="tns:addEmployeeToDept" />
</message>
- <message name="addEmployeeToDeptResponse">
<part name="parameters" element="tns:addEmployeeToDeptResponse" />
</message>
- <message name="getDeptInfo">
<part name="parameters" element="tns:getDeptInfo" />
</message>
- <message name="getDeptInfoResponse">
<part name="parameters" element="tns:getDeptInfoResponse" />
</message>
- <portType name="MyCompany">
- <operation name="setMyDepts">
<input message="tns:setMyDepts" />
<output message="tns:setMyDeptsResponse" />
</operation>
- <operation name="getMyDepts">
<input message="tns:getMyDepts" />
<output message="tns:getMyDeptsResponse" />
</operation>
- <operation name="addEmployeeToDept">
<input message="tns:addEmployeeToDept" />
<output message="tns:addEmployeeToDeptResponse" />
</operation>
- <operation name="getDeptInfo">
<input message="tns:getDeptInfo" />
<output message="tns:getDeptInfoResponse" />
</operation>
</portType>
- <binding name="MyCompanyPortBinding" type="tns:MyCompany">
<soap:binding transport="http://schemas.xmlsoap.org/soap/http" style="" />
- <operation name="setMyDepts">
<soap:operation soapAction="" />
- <input>
<soap:body use="literal" />
</input>
- <output>
<soap:body use="literal" />
</output>
</operation>
- <operation name="getMyDepts">
<soap:operation soapAction="" />
- <input>
<soap:body use="literal" />
</input>
- <output>
<soap:body use="literal" />
</output>
</operation>
- <operation name="addEmployeeToDept">
<soap:operation soapAction="" />
- <input>
<soap:body use="literal" />
</input>
- <output>
<soap:body use="literal" />
</output>
</operation>
- <operation name="getDeptInfo">
<soap:operation soapAction="" />
- <input>
<soap:body use="literal" />
</input>
- <output>
<soap:body use="literal" />
</output>
</operation>
</binding>
- <service name="MyCompanyWS">
- <port name="MyCompanyPort" binding="tns:MyCompanyPortBinding">
<soap:address location="http://localhost:7101/WebService-Annotation-context-root/MyCompanyPort" />
</port>
</service>
</definitions>
Thanks in Advance.
Bachan
Edited by: Bachan on Sep 1, 2010 9:04 PM

Thanks Sam,
SOAP UI saved my life but that want last long.
But still my issue is not resolved.
I am using a plsql program to take the Values from SOAP envelop and pass it to web-service and get the responce.
I am sure my approach is perfectly fine. because it is working fine with other examples, but mean while i have a WSDL link this is really big and my program is not working for this WSDL link.
infact i am getting the output as the same XML of URL.
Let me know if u can help me out.
Thanks
Bachan.

Creating dynamic internal table(Not field symbol table)

Hi Experts,
I am facing problem creating Intarnal table
I have fieldcatalog, I want create dynamic internal table(Not field symbol table).
I have written----
CALL METHOD cl_alv_table_create=>create_dynamic_table
    EXPORTING
   i_style_table             =
     it_fieldcatalog           = it_fldcat
      it_fieldcatalog           = me->gt_fieldcat
   i_length_in_byte          =
    IMPORTING
      ep_table                  = lt_new_table
   e_style_fname             =
    EXCEPTIONS
     generate_subpool_dir_full = 1
     OTHERS                    = 2.
    ASSIGN lt_new_table->* TO <gt_dyn_repdata>.
    CREATE DATA ls_new_line LIKE LINE OF <gt_dyn_repdata>.
    ASSIGN ls_new_line->* TO <gs_dyn_repdata>.
above logic creating dynamic field symbol table.... But I want create normal internal table.
Thanks,
Rajasekhar

Hi
What do you mean?
It needs to use the field-symbol, this is the price to pay if it wants a dynamic object
Max

I created an envelope template and want to print envelopes inserting addresses from a contact group in address book

I created an envelope template in Pages and want to print envelopes inserting addresses from a contact group in address book. How do I do that?

On what word processor will that be?

(CS5) Aligning, distributing envelope mesh points

Is it possible to align and distribute envelope mesh points? The alignment panel doesn't seem to react when selecting anchor points in an envelope mesh. Hypothetically, this could be solved by manually entering coordinates for mesh points - however, any coordinate value changes affect the entire object rather than the individual points. So... how do you edit an envelope mesh with precision?
Any help is greatly appreciated.

True in CS4 as well. I have resorted to guides and smart guides for precision placement but like you, would much prefer that mesh points were responsive to the align panel as path points are. Not sure why they're not. But then again, I'm not an engineer.

Create Dynamic Structure based on Field-Symbol

Hi Experts!!
I need to create a structure with dynamic structure included within.
I have a parameter on sel. screen in which we provide table name.
PARAMETERS: p_table TYPE tabname.
FIELD-SYMBOLS: <gt_data> TYPE ANY TABLE.
CREATE DATA gr_data TYPE TABLE OF (p_table).
ASSIGN gr_data-* TO <gt_data>.
Now I need a structure like below:
TYPES: BEGIN OF type_test,
struct TYPE <gt_data>, " dynamic structure based on table name entered on sel. screen
fld1 TYPE c,
fld2 TYPE n,
END OF type_test.
Can somebody suggest how to achieve this?
Your help is highly appreciated. Thanks a lot

You can view this thread where our friend Marcin rocks .. Dynamically create a type
FIELD-SYMBOLS: <gt_data> TYPE ANY TABLE.
FIELD-SYMBOLS: <gs_wa> TYPE ANY.
data:wf_ref type ref to data.
DATA:i_comp TYPE cl_abap_structdescr=>component_table,
i_tot_comp TYPE cl_abap_structdescr=>component_table.
CREATE DATA gr_data TYPE TABLE OF (p_table).
ASSIGN gr_data-* TO <gt_data>.
create data wf_ref like line of <gt_data>.
assign wf_ref->* to <gs_wa>.
*--Getting Compoents from existing type
lf_struct ?= cl_abap_typedescr=>describe_by_name( '<GS_WA>' ).
i_comp = lf_struct->get_components( ).
APPEND LINES OF i_comp TO i_tot_comp.
The idea is Get all the field details available it to i_tot_comp, then append individual fields manually to
i_tot_comp as explained in the link and create a dynamic structure and table.

Essential items to create a wireless mesh network

I want to create two independent wireless networks (2 different SSIDs)
with 3 APs each one of the cisco 1552 series (outdoor Accesss Points) in a mesh topology.
The one network will have 3 1552s APs and the other 3 1552e APs
My question is which cisco items I need plus to the APs (except the antennas)
1. Wireless LAN Controller (which type? one or two?)
2. Wireless Control System Software (Is it essential?)
3. Other...

You would get two wlc to provide redundancy. You can look at the WLC2504 for smaller environments or else look at the WLC 5508 if think you will be growing. The WCS is end of sale and you would need to look at Prime Infrastructure 1.3. This is optional and is not required to have a wireless system up and functional. It does help in larger environments and for troubleshooting purposes.
http://www.cisco.com/en/US/products/ps12239/index.html
Thanks,
Scott
Help out other by using the rating system and marking answered questions as "Answered"

Creating Security Envelopes

When creating a security envelope to be mailed from an organization's dedicated email address, must one enter the real password for that address?

Accessing the client's microphone is considered a violation of the applet security design. Sun doesn't want people able to write applets that can eavesdrop on others. Therefore, you need either a change in the java.policy file allowing the proper security (see Sun's "JavaSoundDemo" readme.txt for further details) or you need to sign the .jar containing the applet.

Code for creating secure envelope

Hi,
We have a pdf document, but we need to create a secure envelope around it, programatically.
Can we create a secure envelope through a java program?
If yes, can you pls share the code to do it?
Thanks.

What kind of "secure envelope" are you looking for?
You can send me a PM or email to discuss it further.

Is it possible to create a gradient mesh object with 2 spot colors which separates & prints as a 2 color print job?

I have a gradient mesh object which uses 2 spot color values (including some tints of those 2 colours) which I'd like to print as a 2 color print job. Is this possible? If not, any suggestions as to how I should proceed? The print job MUST be 2 color. Ideally I don't want to use raster objects but if I have to would appreciate any advice on the easiest way to transform my 2 color mesh object into a matching duotone raster object.

I'd really say it's that PPD with the new n-space features of CS3 and CS4. If I use your PPD I get the same shoddy results you do with the postscript file. In fact, Acrobat Distiller errors with a log...
<PDFX ISO="15930-1:2001" COMPLIANT="false">
PDF/X Compliance Report
1. Color
   The following pages are separated plates:
      Page 1, Occurrences: 1
      Page 2, Occurrences: 1
      Page 3, Occurrences: 1
      Page 4, Occurrences: 1
   Violation. The use of %%PlateColor is not permitted and was found in the document. Occurrences: 7
   Violations: The total found in this section was 11.
2. Summary
   Warnings: The total found in this document was 0.
   Violations: The total found in this document was 11.
   This document does not pass PDF/X-1a:2001 compliance checks.
</PDFX>
%%[ Warning: Did not pass PDF/X compliance tests. No PDF file produced. ] %%
If I use your PPD, print your AI file to a postscript file, then simply open the resulting Postscript file with AICS4, I see the same bad results that I showed in the movie. I think the PPD can't handle the new method of breaking out spots in gradients. Just to test this theory... try a different PPD and see if that works, at least to show the seps properly.

How to create christmas scenery nature with using symbol tool in Adobe Illustrator cs6

created by me...
Link >>>> http://www.youtube.com/watch?v=G1WUFoMw_Lk

Er, your point being?
Seems you have a lot to learn.
Perspective, aerial perspective, reflections and so on.

Disk Image only creates a folder with "no access" symbol

For some reason, when I 2x click a disk image of an application, it creates a folder on the desktop with the name of the application but with a red circle with a "-" in it in the lower right hand corner of the folder. I have restarted and repaired permissions. I did have a few other drives attached when this began, but have since disconnected them.

leonel junior wrote:
I boot from the Lion DVD,
There are no Apple supplied Lion boot DVD's , you use command r to boot into Recovery HD partition, if that doesn't work good chance the drive is dead, it likely will have to pulled to test any data recovery efforts made.
I turned off the computer and next morning I turned on agian and this time with no problems, I use it for a few days with no problems but yesterday it happens again...
Hold Shift key upon boot to fix the drive, reboot holding option and select OS X to boot and head to System Prefs, change the startup drive to OS X.
If you can't do this, your looking at data recovery efforts or repalcing the drive, total erase & restore.
PS: when the iMac started up with no problems I run disk utility and made a repair disk to the mac HD...
The option key, set startup disk in system prefs should resove the issue.
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents

Creating an Envelope Mesh to a Symbol

Similar Messages

Maybe you are looking for