Creating an Intranet and using IIS 6 and recieiving a 403.14 error when trying to access remote servers share.

I can access the remote shares contents in my browser if I use file:////<server name>/share/filename.file but when I set up a link in the html code, I receive the 403.14 error in the log files. I also have directory listing set on the IIS 6 webpage
on our intranet server.
I am stuck and at a loss... I'm not terribly familiar with IIS...
Thanks in advance,
Eric

Hi,
Base on my experience, the UNC must use the
\\+PATH format, in some case if your code is not standard it will cause unknow error, more about the IIS question please post to the IIS forum.
More information:
IIS support forum
http://forums.iis.net/
Naming Files, Paths, and Namespaces
http://msdn.microsoft.com/en-us/library/windows/desktop/aa365247(v=vs.85).aspx
Thanks for your understanding and support
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

I am getting a 404 error when trying to access any search link using google, I can get to a website if I enter the url directly. I have cleared my history, emptied the cache and reset safari.

I keep getting a 404 error when trying to access any search link using google, I can get to a website by directly using the URL. I have cleared history, empited the cache and reset safari. Any suggestions.

Right. If you are using delegated privs and sudo, make sure that sudo is configured to pass on the PERL5LIB and ORACLE_HOME environment variables at least.

Error when trying to access the RBAC User editor and Message tracking

Hi,
I am getting an error when trying to access the RBAC User editor and Message tracking on the Web Mgmt interface. I verified that the admin account trying to access is in the Organization Management group and has the correct Role Assignment Policy applied.
I searched through this thread below and saw that matching the msExchRoleLink and msExchUserLink attributes fixed the issue.
https://social.technet.microsoft.com/Forums/exchange/en-US/fc568cc6-8691-4127-b70b-bcc82f9b1f7f/first-2010-cas-server-no-administrator-rights-emc-permissions-gone?forum=exchange2010
However I have another environment where this is not the case and works just fine; the msExchUserLink attribute has a value of CN=Organization Management,OU=Microsoft Exchange Security Groups,DC=Domain,DC=Local which is different as per the issue outlined in
the above thread so I am not convinced that this will work and also don’t want to blindly edit something in adsiedit without being sure.
I then checked the event logs on the server and saw the below error logged;
Current user: 'Domain/Server Services Accounts/administrator'
Request for URL 'https://server.domain.com/ecp/default.aspx?p=AdminDeliveryReports&exsvurl=1' failed with the following error:
System.Web.HttpUnhandledException: Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> Microsoft.Exchange.Management.ControlPanel.UrlNotFoundOrNoAccessException: The page may not be available or you might not have permission to open the
page. Please contact your administrator for the required credentials. For new credentials to take effect, you have to close this window and log on again.
at Microsoft.Exchange.Management.ControlPanel._Default.CreateNavTree()
at Microsoft.Exchange.Management.ControlPanel._Default.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
--- End of inner exception stack trace ---
at System.Web.UI.Page.HandleError(Exception e)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequest(HttpContext context)
at ASP.default_aspx.ProcessRequest(HttpContext context)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
Microsoft.Exchange.Management.ControlPanel.UrlNotFoundOrNoAccessException: The page may not be available or you might not have permission to open the page. Please contact your administrator for the required credentials. For new credentials to take effect, you
have to close this window and log on again.
at Microsoft.Exchange.Management.ControlPanel._Default.CreateNavTree()
at Microsoft.Exchange.Management.ControlPanel._Default.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
I then had a look at the IIS permissions for ecp and owa. The account did not have permissions so I added them there but still got the same error. I’ve also tried all of the above with a newly-created account but still got the same issue.
Any ideas as to what the above event log is specifically referring to?

Hi,
From your description, I would like to clarify the following thing:
If you want to search message tracking logs, the account you use should be a member of the role groups below:
Organization Management role group, Records Management role group, Recipient Management role group.
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support

Gettign this error when trying to access webpage using JRE V 1.4.2_06

Gettign this error when trying to access webpage using JRE V 1.4.2_06
Any suggestions?
java.io.IOException
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.getInputStream(Unknown Source)
at java.net.HttpURLConnection.getResponseCode(Unknown Source)
at sun.net.www.protocol.https.HttpsURLConnectionImpl.getResponseCode(Unknown Source)
at sun.plugin.cache.CachedFileLoader.load(Unknown Source)
at sun.plugin.cache.FileCache.get(Unknown Source)
at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.connectWithCache(Unknown Source)
at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.connect(Unknown Source)
at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.getInputStream(Unknown Source)
at java.net.HttpURLConnection.getResponseCode(Unknown Source)
at sun.net.www.protocol.https.HttpsURLConnectionImpl.getResponseCode(Unknown Source)
at sun.applet.AppletClassLoader.getBytes(Unknown Source)
at sun.applet.AppletClassLoader.access$100(Unknown Source)
at sun.applet.AppletClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.applet.AppletClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadCode(Unknown Source)
at sun.applet.AppletPanel.createApplet(Unknown Source)
at sun.plugin.AppletViewer.createApplet(Unknown Source)
at sun.applet.AppletPanel.runLoader(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Caused by: java.net.SocketException: Connection reset
at java.net.SocketInputStream.read(Unknown Source)
at com.sun.net.ssl.internal.ssl.InputRecord.a(Unknown Source)
at com.sun.net.ssl.internal.ssl.InputRecord.read(Unknown Source)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(Unknown Source)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(Unknown Source)
at com.sun.net.ssl.internal.ssl.AppInputStream.read(Unknown Source)
at java.io.BufferedInputStream.fill(Unknown Source)
at java.io.BufferedInputStream.read1(Unknown Source)
at java.io.BufferedInputStream.read(Unknown Source)
at sun.net.www.http.HttpClient.parseHTTPHeader(Unknown Source)
at sun.net.www.http.HttpClient.parseHTTP(Unknown Source)
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.getInputStream(Unknown Source)
at sun.net.www.protocol.https.HttpsURLConnectionImpl.getInputStream(Unknown Source)
at sun.plugin.net.protocol.http.HttpUtils.followRedirects(Unknown Source)
at sun.plugin.cache.CachedFileLoader.download(Unknown Source)
... 21 more
java.io.IOException
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.getInputStream(Unknown Source)
at java.net.HttpURLConnection.getResponseCode(Unknown Source)
at sun.net.www.protocol.https.HttpsURLConnectionImpl.getResponseCode(Unknown Source)
at sun.plugin.cache.CachedFileLoader.load(Unknown Source)
at sun.plugin.cache.FileCache.get(Unknown Source)
at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.connectWithCache(Unknown Source)
at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.connect(Unknown Source)
at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.getInputStream(Unknown Source)
at java.net.HttpURLConnection.getResponseCode(Unknown Source)
at sun.net.www.protocol.https.HttpsURLConnectionImpl.getResponseCode(Unknown Source)
at sun.applet.AppletClassLoader.getBytes(Unknown Source)
at sun.applet.AppletClassLoader.access$100(Unknown Source)
at sun.applet.AppletClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.applet.AppletClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadCode(Unknown Source)
at sun.applet.AppletPanel.createApplet(Unknown Source)
at sun.plugin.AppletViewer.createApplet(Unknown Source)
at sun.applet.AppletPanel.runLoader(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Caused by: java.net.SocketException: Connection reset
at java.net.SocketInputStream.read(Unknown Source)
at com.sun.net.ssl.internal.ssl.InputRecord.a(Unknown Source)
at com.sun.net.ssl.internal.ssl.InputRecord.read(Unknown Source)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(Unknown Source)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(Unknown Source)
at com.sun.net.ssl.internal.ssl.AppInputStream.read(Unknown Source)
at java.io.BufferedInputStream.fill(Unknown Source)
at java.io.BufferedInputStream.read1(Unknown Source)
at java.io.BufferedInputStream.read(Unknown Source)
at sun.net.www.http.HttpClient.parseHTTPHeader(Unknown Source)
at sun.net.www.http.HttpClient.parseHTTP(Unknown Source)
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.getInputStream(Unknown Source)
at sun.net.www.protocol.https.HttpsURLConnectionImpl.getInputStream(Unknown Source)
at sun.plugin.net.protocol.http.HttpUtils.followRedirects(Unknown Source)
at sun.plugin.cache.CachedFileLoader.download(Unknown Source)
... 21 more
load: class com.adp.e.hrclient.Client.class not found.
java.lang.ClassNotFoundException: com.adp.e.hrclient.Client.class
at sun.applet.AppletClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadCode(Unknown Source)
at sun.applet.AppletPanel.createApplet(Unknown Source)
at sun.plugin.AppletViewer.createApplet(Unknown Source)
at sun.applet.AppletPanel.runLoader(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Caused by: java.net.SocketException: Connection reset
at java.net.SocketInputStream.read(Unknown Source)
at com.sun.net.ssl.internal.ssl.InputRecord.a(Unknown Source)
at com.sun.net.ssl.internal.ssl.InputRecord.read(Unknown Source)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(Unknown Source)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(Unknown Source)
at com.sun.net.ssl.internal.ssl.AppInputStream.read(Unknown Source)
at java.io.BufferedInputStream.fill(Unknown Source)
at java.io.BufferedInputStream.read1(Unknown Source)
at java.io.BufferedInputStream.read(Unknown Source)
at sun.net.www.http.HttpClient.parseHTTPHeader(Unknown Source)
at sun.net.www.http.HttpClient.parseHTTP(Unknown Source)
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.getInputStream(Unknown Source)
at java.net.HttpURLConnection.getResponseCode(Unknown Source)
at sun.net.www.protocol.https.HttpsURLConnectionImpl.getResponseCode(Unknown Source)
at sun.applet.AppletClassLoader.getBytes(Unknown Source)
at sun.applet.AppletClassLoader.access$100(Unknown Source)
at sun.applet.AppletClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)

I got it, i only had to check the option 'Use SSL 2.0 compatible ClientHello format' from the java's control panel advanced tab.
Metalink's note: 787739.1
:)

Window pops up stating"browser error" when trying to access documents using google doc's. Holding shift key and refresh does not clear window. What's next?

Shut down and restarted computer, "browser error" still pops up when trying to access documents using Google doc's.
Holding shift key and clicking refresh does not clear window.
What else can be done to clear the window and gain access to my documents?

Hi,
Found a note explaining the significance of these errors.
It says:
"NZE-28862: SSL connection failed
Cause: This error occurred because the peer closed the connection.
Action: Enable Oracle Net tracing on both sides and examine the trace output. Contact Oracle Customer support with the trace output."
For further details you may refer the Note: 244527.1 - Explanation of "SSL call to NZ function nzos_Handshake failed" error codes
Thanks & Regards,
Sindhiya V.

Ive got data on my phone and its keep saying network error when trying to connect

Im trying to connect to internet when im out and about ive got data on my phone but it keeps saying network error when trying to connect

Hi there,
You may want to take a look at some of the troubleshooting steps found in the article below.
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/ts3780
-Griff W.

"The file is damaged and could not be repaired" error when trying to open a PDF in Reader

A few of our employess (only 3 out of over 100 so far) have been getting the error, "The file is damaged and could not be repaired" when trying to open some PDFs. Other people are able to open the same PDF files with no error. It's happening on about 10% of the time. I've read a bunch of threads here with this isue and tried some suggested fixes and nothing has resolved the issue. Here is what I have found works and does not work and the info on their computers:
Computers:
1 Dell Vostro desktop running WIndows 7
1 Toshiba Satellite C55 runnign Windows 8
1 Samsung ATIV Book 4 running Windows 8
All using Adobe Reader XI but we did uninstall that version and tried previous versions and still got the error.
Did Not Work:
As suggested by the company that we use online for claims adjustments where this error is occuring, we tried using a different PDF creator since the files were created using a free PDF creator by the employees. PDF995 and PDFcreator (pdfforge) did not resolve the issue. I then created the PDFs with my Adobe Acrobat, uploaded from my computer to the online program, and that did not resolve the issue.
Saving the file to hard drive and then opening in Adobe did not work.
Turning off Protected Mode and Enhanced Security did not work.
Compatibility View settings enabled in Internet Explorer 10 did not resolve the issue. The previously mentioned claims adjustment software company we use online was code for IE so is not fully compatible with other browsers.
That being said I did try to open the PDF files in Chrome and it also did not work. Same error message.
Does work:
I download the file they cannot open onto my hard drive, open in Adobe Acrobat, Save as a pdf, then email it to them and they can open it via email attachment.
If they close the error and continue trying to open the file over and over sometimes it will eventually open.
Is there a setting in Windows that is preventing them from opening a small % of files some of the time? Thanks in advance for any help!
James

If anyone is reading this still looking for what caused the issue and how to fix it here is what I discovered.
The antivirus program our company uses, Bitdefender Antivirus Plus, was causing some of the PDF files not to open. After troubleshooting the different modules and settings the culprit was..
Scan SSL in Privacy Control Settings. Turning it OFF solved the problem and all the PDF files that previously would not open now open just fine. This issue has been sent to Bitdefender for them to review. If you use a different antivirus program and are having this issue try locating the Scan SSL setting and see if turning it off solves the problem.

Migrated to a new mac pro and keep getting an install error when trying to update the creative cloud app

I get an error when I try to start creative cloud that asks me to update. I download the updated installer and run it. I then get an error that says:
Adobe Creative Cloud is needed to resolve this problem. However, it is missing or damaged. Please download and install a new copy of Creative Cloud from 'http://www.adobe.com/go/adobecreativecloudapp'.
Following the message is two buttons. Quit and Get Creative Cloud. If I follow these directions I will sit here all day just downloading and trying to install Creative Cloud only to find out that I have a problem for which I need to download and install Creative Cloud. This would be like the person who uses a whole bottle of shampoo every time they get in the shower just because is says lather rinse repeat. Can you break this endless loop for me?

Ado Bee in the future please only migrate documents and settings. Adobe applications are not designed to be copied from one computer to another.
You may still be able to recover by completing the following steps:
Run all available uninstallers in the Applications/Utilities/Adobe Installers folder
Run the CC Cleaner Tool - Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 - http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
Reinstall the Adobe Creative applications included with your membership - Install and update apps - https://helpx.adobe.com/creative-cloud/help/install-apps.html

Deployment of upgraded site from staging to production - error when trying to access "Content and Structure"

Hi,
We recently upgraded a site from SP 2010 to SP 2013. For moving to production, I copied over the content database to production and used the following command to to make the content database accessible in production:
Mount-SPContentDatabase -Name 'WSS_Content_SSBC' -WebApplication 'https://biprod.bljc.com'
I then change the host name of the site from staging to production host name using
$site = Get-SPSite https://stagingsite.companyname.com
$site.Rename("https://prodsite.companyname.com")
The site loads and I can see my content. But when I try to use the "Content And structure" link under "Site Settings" --> "Site administration"
I receive the following errror:
Sorry, something went wrong An unexpected error has occurred.
Technical Details
Troubleshoot issues with Microsoft SharePoint Foundation.
Correlation ID: 3fbfcd9c-7185-10a2-6d19-8570d7f15319
Date and Time: 11/19/2014 3:38:31 PM
IN THE ULS LOG, THIS IS ONE OF THE ERRORS:
Application error when access /_layouts/15/sitemanager.aspx, Error=Object reference not set to an instance of an object.
at Microsoft.SharePoint.Publishing.Internal.WebControls.ObjectSerializer.DeleteAllowed(Boolean checkPermissions)
at Microsoft.SharePoint.Publishing.Internal.WebControls.SmtButtonField.FormatDataValue(Object dataTextValue, Boolean encode)
at System.Web.UI.WebControls.BoundField.OnDataBindField(Object sender, EventArgs e)
at System.Web.UI.Control.DataBind(Boolean raiseOnDataBinding)
at System.Web.UI.Control.DataBindChildren()
at System.Web.UI.Control.DataBind(Boolean raiseOnDataBinding)
at System.Web.UI.WebControls.GridView.CreateRow(Int32 rowIndex, Int32 dataSourceIndex, DataControlRowType rowType, DataControlRowState rowState, Boolean dataBind, Object dataItem, DataControlField[] fields, TableRowCollection rows, PagedDataSource pagedDataSource)
at System.Web.UI.WebControls.GridView.CreateChildControls(IEnumerable dataSource, Boolean dataBinding)
at Microsoft.SharePoint.WebControls.SPGridView.CreateChildControls(IEnumerable dataSource, Boolean dataBinding)
at System.Web.UI.WebControls.CompositeDataBoundControl.PerformDataBinding(IEnumerable data)
at System.Web.UI.WebControls.GridView.PerformDataBinding(IEnumerable data)
at System.Web.UI.WebControls.DataBoundControl.OnDataSourceViewSelectCallback(IEnumerable data)
at System.Web.UI.WebControls.DataBoundControl.PerformSelect()
at System.Web.UI.WebControls.BaseDataBoundControl.EnsureDataBound()
at System.Web.UI.WebControls.GridView.OnPreRender(EventArgs e)
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
BTW, don't know if this applies but production is load balanced and staging is not.
Thansk,
Sherazad
Sherazad

Hi Sherazad,
As the Content and Structure is enabled by the SharePoint Publishing feature, I recommend to deactivate and re-activate the publishing feature with the command below to see if the issue still occurs:
Disable-SPFeature –identity Publishing -URL <sitecollection url>
Enable-SPFeature -Identity Publishing -url <sitecollection url> -Force
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

Error when trying to connect to deployment share MDT 2013 - Using Virutal Machine as Refernce image

Hello all
I cant seem to move forward on this build and capture. I am using Hyper-V on windows 8.1 to perform the B&C on VM but keep getting this error when I boot the VM
H
Phil Balderos

IT's common practice to add the credentials (domain\username+Password) directly into the bootstrap.ini and/or customsettings.ini file to allow for totally hands off building of corporate images. Check to see if have the right credentials added in.
Additionally, you may have network connectivity problems. Best thing to do while in WinPE is to press F8, that will bring up a cmd.exe window, allowing you to do some manual debugging.
ipconfig /all
ping opsit12226
net use * \\opsit12226\deploymentshare$ /u:opsit1226\administrator *
Keith Garner - Principal Consultant [owner] -
http://DeploymentLive.com

My iPod is stuck on apple logo and I get a 1434 Error when trying to restore it.

Hello, I hope somebody can help me. I have a 120 gb ipod classic (6th generation). I purchased it a long time ago. It was working fine for a few years and then suddenly it's been stuck on the apple logo ever since.
I tried to restore it by putting in on disk mode and connecting it to my Mac. My iTunes recognizes the device (But my Mac doesn't!). On iTunes, I tried to restore it, but I get an error message 1434, stating that the restoration could not be completed.
I read that I should try to erase the drive with Disk Utility, but when I get there, the button to erase the drive is unclickable. I tried to partition as well, but it also did not work (maybe I am doing it wrong? Could somebody direct me with better instructions?)
I'm wondering if the hard drive is dying, or if I have a bad ribbon, or if the logic board itself is broken. Not sure what method of action I should take. I can't even get into the diagnostic screen.
PLEASE HELP!

Hello E1777,
You can try this link to download iTunes from the Apple website. It should resolve the issue for you.
iTunes 11.0.4
http://support.apple.com/kb/dl1614
Thanks for using Apple Support Communities.
Regards,
-Norm G.

DFS and Windows 7 x64 strange behavior when trying to access a DFS link through mapped drive

I've manually mapped a network drive (Q Drive) to a DFS location. Whenever I go into "My Computer" and open the Q Drive it shows the DFS links but when I double click one of the links it randomly takes me back to the "My Computer" starting point showing my standard drive letters. If I click through the Q drive and the DFS several time it all of the sudden works. Sometimes this circle of clicking can go on for 5-10 times before it works properly.
I'm running the x64 edition of Windows 7. Any suggestions on how to make this work properly? Its very annoying.

GPO mapped namespace where you can't connect through the mapped drive letter but can connect through the DFS UNC namespace? Do you use access based enumeration?
I personally think it has something to do with network bandwidth, the security token and offline files. =)
You can access the namespace itself but not any of the linked shares (try checking the ACL:s on the shares and you get permission denied, but you still see them, ie they are listed).
I found a post sometime ago about corrupted/trunkated security tokens. If the member was part of too many AD groups the token was trunkated and corrupted. That was going to be my next move. Sniff the traffic and see what actually happens when the issue occur
if theres something to be learnt there. Since it works correctly through the UNC adress but not through the drive letter you ough to be able to see what is different between the two requests.
http://blogs.technet.com/b/askds/archive/2008/05/14/troubleshooting-kerberos-authentication-problems-name-resolution-issues.aspx
One thing I noted was that it only happened to remotely connected computers on slow 3G connections (we use Direct Access). Never on LAN-connected computers with GB access or remote computers with fast (>15Mbps) access. We also use folder redirection,
which I think could be part of the problem, ie the share never goes online, atleast for us the issue was itermittent, it never happend all of the time, just from time to time. And if I disconnected and reconnected it could fix the issue for that particular
sessions, usually it didn't but occasionally it did (just pulling the network cable and put it back). Check the offline/online status the folders show up as offline even though they are online.
Enough of my ramblings. Sorry to hear you still have the problem and I hope you find a way to solve it.

Just installed LMS 3.2 and get "Page Cannot Be Displayed" when trying to access it.

I installed CiscoWorks LMS 3.2 on a Server 2008 SP1 machine. Installation went fine. I am using IE 7.0 on the server to access LMS 3.2. I get the web interface for the unsecure site but when I provide my login credentials, I get redirected to the 443 site and the generic IE Page Cannot Be Displayed is returned.

Could be CSCtb17186:
http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtb17186
https://supportforums.cisco.com/message/1328649#1328649
Also, LMS 3.2 calls for manually setting the amount of swap on Win2k8:
https://supportforums.cisco.com/message/680507#680507

I just agreed to a update of iTunes and now I get a "language" error when trying to open it.

I just agreed to an update of iTunes on my imac (running OS-X 10.8.4) and now I get an error when trying to open iTunes. The error is: "This version of iTunes has not been correctly localized for this language. Please run the English version." What?
I'm not a tecchie and could really use some step-by-step instructions on how to get my Itunes working again! I've never changed the language on my Mac...have no idea where this language error came from.
Thanks!

Hello E1777,
You can try this link to download iTunes from the Apple website. It should resolve the issue for you.
iTunes 11.0.4
http://support.apple.com/kb/dl1614
Thanks for using Apple Support Communities.
Regards,
-Norm G.

Keep getting VncViewer.class not found error when trying to use Windows 7

Greetings,
I have no issue accessing the OVM Manager 2.2 with OEL 5.4 x86_64 with the latest Java release from ULN. But when I use a Windows 7 client ( x86) with the Sun Java 6 Update 18 I get the following error when trying to access the Console of a VM Guest:
Java Plug-in 1.6.0_18
Using JRE version 1.6.0_18-b07 Java HotSpot(TM) Client VM
User home directory = C:\Users\deverej
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
o: trigger logging
q: hide console
r: reload policy configuration
s: dump system and deployment properties
t: dump thread list
v: dump thread stack
x: clear classloader cache
0-5: set trace level to <n>
load: class VncViewer.class not found.
java.lang.ClassNotFoundException: VncViewer.class
     at sun.plugin2.applet.Applet2ClassLoader.findClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.plugin2.applet.Plugin2ClassLoader.loadCode(Unknown Source)
     at sun.plugin2.applet.Plugin2Manager.createApplet(Unknown Source)
     at sun.plugin2.applet.Plugin2Manager$AppletExecutionRunnable.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Caused by: java.io.IOException: open HTTP connection failed:http://141.144.112.202:8888/OVS/faces/app/VncViewer/class.class
     at sun.plugin2.applet.Applet2ClassLoader.getBytes(Unknown Source)
     at sun.plugin2.applet.Applet2ClassLoader.access$000(Unknown Source)
     at sun.plugin2.applet.Applet2ClassLoader$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     ... 7 more
Exception: java.lang.ClassNotFoundException: VncViewer.class
I am curious fi I should use only a specifc Java Engine with IE 7 or the latest Firefox browers.

Same issue to with Windows XP SP3 x86 with Java Runtime Enviornment 1.5.0_15
J2SE Enviornment 5.0 Update 15
Java 6 Update 17

Creating an Intranet and using IIS 6 and recieiving a 403.14 error when trying to access remote servers share.

Similar Messages

Maybe you are looking for