Creating an ISO file from FCP

I have been asked something for the first time ever...to provide a TOS format DVD. I have received this befire..but never created. What export steps do I take to make the DVD?
Thanks

You make an regular dvd using dvdstudiopro. Once you do the build you need to create an iso image.
Here's a link I found with a simple google for "creating an iso file on a mac"
http://club.myce.com/f59/create-iso-image-mac-os-x-using-built-disk-utility-app- 200501/

Similar Messages

Creating an ISO file from a bunch of BUP, IFO, VOB files

Hi
First, i want to apologize to all of you if my question is already answered somewhere, i did a search before.
I have a bunch of BUP, IFO, VOB files (from an entire DVD) that i would like to burn into a single .ISO file.
I am looking for the best software to do this. I would have used ImgBurn on my PC i guess... But with my iMac?
Thanks a lot for your much appreciated help!
Mopito

Mopito wrote:
if my question is already answered somewhere, i did a search before.
Yes, the question has been answered before, several times.
The only difference is that you want to create an ISO image, which usually means a raw disk image from another OS (eg, Win or Linux), although Mac OS X can attach or burn such an image.
If you want to create a DVD-Video disc image, then you must use a tool specifically designed for it, if you want to use the image to create DVDs which will play in stand-alone DVD players. That's because such DVDs require a rigid disc layout.
If you want to go commercial, you can use Toast or NTI DragonBurn. Otherwise, Burn, suggested by Alberto Ravasiomay also be a good solution (I'm not sure if it can save disc images, rather than burn them). Other solutions are
DVD Image Utility
<http://geek.thinkunique.org/2007/07/17/dvd-image-utility/>
or, if you can handle the command line,
mkisofs
<http://cdrecord.berlios.de/private/cdrecord.html>
(part of the cdrtools kit)
You can also have a look at
Disco
<http://discoapp.com/>
LiquidCD
<http://www.maconnect.ch/>
Both can burn DVD-Video; I'm not sure if they can save as a disc image.
J D McIninch wrote:
Start Disk Utility
DU (or hdiutil) can create an ISO image, and, if it's used to burn to DVD, the disc can be played on computer DVD drives. But it will not play on most stand-alone DVD players, because of the layout issue I mentioned above. Hence, it's not a good idea to use it to create a DVD-Video disc image.

How to create bootable iso file from usb flash drive to install windows 7 on macbook early 2008

how to create bootable usb flash drive from iso file to install windows 7 on macbook early 2008

I would like to install windows on my mac because I am in engineering school and there a lot of programs I'd like to have on my computer that only run on windows. And yes I'd like to use bootcamp and I know there must be a way to install off a flash drive. Do you know of a way?

How do you create an .iso file from a bdmv folder?

It's all in the subject line.
Thanks.

smplayer2-git doesn't want to build
-- Configuring done
-- Generating done
-- Build files have been written to: /tmp/yaourt-tmp-a/aur-smplayer2-git/src/SMPlayer2
Scanning dependencies of target translations
[ 1%] [ 2%] [ 1%] [ 2%] Generating smplayer2_uk_UA.qm
Generating smplayer2_zh_CN.qm
Generating smplayer2_zh_TW.qm
Generating smplayer2_vi_VN.qm
lrelease: could not exec '/usr/lib/qt/bin/lrelease': No such file or directory
lrelease: could not exec '/usr/lib/qt/bin/lrelease': No such file or directory
lrelease: could not exec '/usr/lib/qt/bin/lrelease': No such file or directory
src/CMakeFiles/translations.dir/build.make:92: recipe for target 'src/smplayer2_zh_CN.qm' failed
make[2]: *** [src/smplayer2_zh_CN.qm] Error 1
make[2]: *** Waiting for unfinished jobs....
src/CMakeFiles/translations.dir/build.make:97: recipe for target 'src/smplayer2_vi_VN.qm' failed
make[2]: *** [src/smplayer2_vi_VN.qm] Error 1
src/CMakeFiles/translations.dir/build.make:87: recipe for target 'src/smplayer2_zh_TW.qm' failed
make[2]: *** [src/smplayer2_zh_TW.qm] Error 1
lrelease: could not exec '/usr/lib/qt/bin/lrelease': No such file or directory
src/CMakeFiles/translations.dir/build.make:102: recipe for target 'src/smplayer2_uk_UA.qm' failed
make[2]: *** [src/smplayer2_uk_UA.qm] Error 1
CMakeFiles/Makefile2:142: recipe for target 'src/CMakeFiles/translations.dir/all' failed
make[1]: *** [src/CMakeFiles/translations.dir/all] Error 2
Makefile:117: recipe for target 'all' failed
make: *** [all] Error 2
==> ERROR: A failure occurred in build().
Aborting...
==> ERROR: Makepkg was unable to build smplayer2-git.
==> Restart building smplayer2-git ? [y/N]
I'm not exactly a master at building things from source code so I don't understand what's gone wrong here.

Creating an image file from cd

Good day,
I was wondering how if anyone knows a way to create an ISO image from a cd to run on virtual box. I tried creating one using disk utility, but it did not work. Can this be done through Snow Leopard default programs, or would I need to purchase a new prog?
Tried searching google, but the article I followed was the failed attempt. Did this fail due to copy protection? Before I got rid of my windows pc, I was able to make a copy of the cd, but that would not work either.
The end result would be to mount the iso file on virtual box so I can install age of mythology (Titans expansion) on my XP host. (I know that there is an age of mythology for mac, but its not the latest version, and Virtual box has beta direct X and 3d support).
Any help would be great!
Thanks.

Okay. Thanks for trying Perhaps I can pay for the Mac version when I have the cash, then perhaps in a few months/years when enough people have bought the original, they will make the expansion ready on mac as well. And I suppose there is always boot camp.

How to create a pdf file from multiple images ?

Dear All,
I want to create a SINGLE page pdf file from two or more page size images that are combined to make a single page pdf. Again, this question is on pdfs that are made out of several, atleast two color images and a black-and-white mask for one of them.
I have such pdf files from an unknown source (the producer is edited out) whereby there are three tiff images, obtained using the well known pdfimages extractor.
When I want to make a pdf out of tiff or png or other image formats, I right click and tell Adobe Acrobat to make a pdf.
However, I dont know how I can give a command to select say, three tif images and specify which is the mask for which and then join them in a way that I get the pdf from the composite of the two color images and a mask for one of them.
Please help me out.
I am a little familiar with the pdf structure skeleton and when necessary, fixed xref tables in one of my favorite editors. A few years ago, I also wrote a bunch of javascripts to make some annotations and needed some automation and used some itext type libraries. However, I need your help in this problem as I am now rusty and forgot some of what I studied to solve my earlier problems. This is a new problem for me. Gentle hints from you would be very nice to help me in this problem. Please specify if necessary what manual and pages to read. in the pdfspec.
Best Regards
Disabled Veteran [physically handicapped]

Hello Again.
On Fri, May 11, 2012 at 12:20 PM, lrosenth <[email protected]> wrote:
>
> Re: How to create a pdf file from multiple images ?
>
> created by lrosenth in PDF Language and Specifications - View the full
> discussion
> ________________________________
>
> No clue who Irving is…
>
I was hoping to have your first name so its easy for me to address you.
> I have no clue what OS platform, programming language, etc. you use so
> can’t really narrow things down.
I would gladly mention that I am working on windows platform, preferably XP.
I can also work on linux for free products that come with it.
> Also, as this is an Adobe forum, we only
> recommend Adobe products – so there may be other options that even my list
> wouldn’t include.
But adding other products, for the help of an adobe products user,
even if it outside adobe, shall add greater prestige to your company
and give impression of user-centeredness.
> If you read ISO 32000-1:2008 (aka the PDF standard), you will find the
> information about Images and Image Masks well described. I didn’t think I
> needed to repeat any of that information.
Well, just add the few pdf stanzas since you are proficient on it and
I am presently a little rusty as I mentioned. Just asking a little
extra yard, not even to go an extra mile.
> And, if you read that same document, you will see that there is NO SUCH
> THING as a “text only PDF”. All PDF documents are structured binary files.
Well, ascii format or uncompressed format that is human readable. I
know its a binary file, but human readable ascii version of it.
I hope you can give me some stanza and various other approaches
possible so I can select or combine things for myself. I see only a
miniscule number of posts claiming to have written masks in this forum
and then with no details.
Regards
Roger
Message was edited by: dying veteran
because the adobe posting system went crazy and truncated all except the first line ... dunno why

Export DPX files from FCP with Timecode

Hi,
Have anyone found a way to export DPX files from FCP, and also get the timecode in the DPX header...
Thanks for answers!!
//P

Your workflow is not correct.
In FCP I bring the clip to the timeline, trim, color correct it then File> Export> Using Compressor. Compressor opens up and places the clip into the Batch Window. This works fine, but when I go back to FCP, delete the clip from the timeline and place an other clip there and when I Export>Using Compressor, Compressor places the clip in a new Window title "Untitle 1" and so it goes on. As far as I understood, whenever you add a clip from the FCP it places it below the first clip so when I want to add my settings, I can add all 3 settings to all the clips. Did I missunderstand something?
You're misunderstanding a couple of different things. When you send a clip or sequence from FCP to Compressor, you cannot then apply the settings you want in Compressor then go back to FCP and delete that clip from your sequence ... Compressor is trying to reference that sequence. If you keep removing clips, then Compressor won't follow those clips ... you're essentially breaking the link between Compressor and FCP by doing this.
Try this:
1. Load Clip A into the Viewer, Set your In & Out points and add your Color Correction.
2. Press Command U to Make a Subclip. This will create a separate "clip" in your bin. Rename as necessary.
3. Repeat this process for your other 19 clips.
4. Then Select all of your new subclips in your Browser, then File > Export > Using Compressor. This will open Compressor and add all of those subclips into the Job window.
5. Add your appropriate Target settings and set your Destinations and revise any filenames if necessary.
6. Click Submit.
For a good, quick overview on the basics of how and when to use Compressor, check out this video from MacBreak Weekly: http://www.pixelcorps.tv/macbreak153

Generally when creating a Word file from either a Mac or Win7 pc and opening it on two different machines (either one first) it always prompts that the file is open and will be opened as read only. However opening a CSS file does not prompt that it is alr

Generally when creating a Word file from either a Mac or Win7 pc and opening it on two different machines (either one first) it always prompts that the file is open and will be opened as read only.
However opening a CSS file does not prompt that it is already open on or from any machine which is causing code edits to be lost.
What we found from out testing:
- The file can be saved from one user to the server and WILL NOT PROMPT on other machines until the saving machine has the Dreamweaver program closed completely
- The file can be closed and Dreamweaver minimised to the launch bar but it still will not register on other machines that it has been changed.
- Also, until the Dreamweaver program is closed on the machines, it will continue to open it's saved version of the file.
Example Scenario:
- User 1 opens test.css (which is 2000 lines) and adds some code to the end of the file to bring it up to 2500 lines
- Meanwhile User 2 opens test.css as well (opens as 2000 lines as User 1’s edits have not yet been saved) and adds in code to bring it to 2300 lines
- User 1 saves his file and closes it - but Dreamweaver is still open.
- User 2 also saves his file and leaves Dreamweaver open.
- The server will report the size and last edit of the file the same as User 2 as he was the last person to save it (and if you open from the Win7 Machine it will show as User 2’s 2300 line version)
- If User 1 then open's the file again (from either the 'recent' in Dreamweaver OR clicking on the file directly in Finder...which version opens.... The version that User 1 saved! Not the true version on the server, but the version that User 1 edited and saved with 2500 lines in it.
- Same for User 2, he will open 'his' version with 2300 lines in.
Other information:
- Files are opened directly from the server
- Sometimes the users will save incrementally and re-open
- Most of the time users will save incrementally and keep the files open
- The users will never not save incrementally and just save when closing the file once finished
- The users are usually working on the files all day
- It is always the bottom lines of code that are lost. It could be a case of the two versions being mixed up and cutting off the newly added lines based on the line count (possibly).
It is as if Dreamweaver is holding a cache of the version locally and then only properly looking back to the server when it has been completely closed. It is very difficult to see how the server is causing such an impact on these files, there are very few logs which are giving any indication to the root cause of the problems.
Anyone know if this is a known issue?
Is there a way that there can be a featured implemented on the server that doesn't allow another user to open a file if it is already open on another machine?
Thanks

Your server file handling has nothing, and really nothing to do with Adobe software. If files don't get locked for (over-)writing and/or lose connection to the program opening them, then your server is misconfigured. It's as plain and simple and that. Anything from "known file types"/ file associations not being set correctly, MIME types being botched, crooked user privileges and file permissions, missing Mac server extensions, delayed file writing on the server, generic network timeout issues and what have you. Either way, you have written a longwinded post with no real value since you haven't bothered to provide any proper technical info, most notably about the alleged server. Either way, the only way you can "fix" it is by straightening out your server and network configuration, not some magic switch in Adobe's software.
Mylenium

Creating an xml file from abap code

Hello All,
Please let me know which FM do I need to execute in order to create an XML file from my ABAP code ?
Thanks in advance,
Paul.

This has been discussed before
XML files from ABAP programs

Is there a way to run a script to create an RPD file from MDS XML files

We would be interested in using the MDS XML format for the RPD file in saving it in our Subversion source code control system, and I have seen how to do this in the User documentation.
Our question is whether or not there is a way to use a command line tool to recreate the rpd file without having to use the Admin tool, so that we can automate the deployment of the RPD file from source code control to QA and Production environments.
If we check in the RPD file directly, then there is a way to automate the process, but we would prefer to use the MDS XML format since this allows us to save changes in text format, not binary, but we still need to be able to automate the process.
In the Oracle Fusion Middleware XML Schema Reference for Oracle Business Intelligence Enterprise Edition document, I have found that there is a way to automate the creation of the MDS XML files from an RPD file using this command:
biserverxmlgen -M -R repository_pathname [-P password] -D output_directory [-8] [-N] [-Q|-S]
So my question is basically is there a way to reverse this process, to use some command line tool (or Weblogic Scripting or some other mechanism) to create the RPD file from the MDS XML files? Are there options on the biserverxmlexec command that will do what I am asking?

Hey dmfairley,
Thanks for the question. You can absolutely export the project as .mp3, as outlined in this resource:
GarageBand Help: Export songs to disk
http://help.apple.com/garageband/mac/10.0/#gbnd7cbf5ed9
Export songs to disk
You can export a project to your computer as a stereo audio file.
Exported files can be reused in GarageBand to save processing resources by replacing or bypassing multiple regions, instruments, and effects. They can also be used with other music applications and devices, posted on the Internet (on a webpage, or in the iTunes Store, for example), added to an iTunes playlist, or uploaded to a mobile device such as iPhone or iPad.
1. Choose Share > Export Song to Disk.
2. To rename the exported file, select the name in the Save As field, then enter a new name.
3. Choose a location to save the exported file from the Where pop-up menu.
4. Select the format for the exported file (AAC, MP3, or AIFF).
5. Choose the quality setting for the exported file from the Quality pop-up menu.
6. Click Export.
Thanks,
Matt M.

How to create one ISO file large than 2G

hi,
here when I create one ISO with 3G(larger than 2G) on solaris 10 machine, I met below error:
mkisofs: File too large. cannot fwrite 32768*1
Anyone has suggestion for this problem? How to create one ISO files larger than 2G?
See the detail logs information:
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
mkisofs -o my.iso -A "Software DVD" -D -L -P "Study "-p CBC/XLE -r -T -V R50 -v iso
mkisofs: The option '-L' is reserved by POSIX.1-2001.
mkisofs: The option '-L' means 'follow all symbolic links'.
mkisofs: Mkisofs-2.02 will introduce POSIX semantics for '-L'.
mkisofs: Use -allow-leading-dots in future to get old mkisofs behavior.
mkisofs: The option '-P' is reserved by POSIX.1-2001.
mkisofs: The option '-P' means 'do not follow symbolic links'.
mkisofs: Mkisofs-2.02 will introduce POSIX semantics for '-P'.
mkisofs: Use -publisher in future to get old mkisofs behavior.
Warning: creating filesystem that does not conform to ISO-9660.
mkisofs 2.01 (sparc-sun-solaris2.10)
Scanning iso
Scanning iso/rac_stage3
Using RAC_S000 for /rac_stage2 (rac_stage1)
Using RAC_S001 for /rac_stage1 (rac_stage3)
Using INSTA000.1;1 for ..
Writing: The File(s) Start Block 48
0.42% done, estimate finish Thu Feb 1 16:12:35 2007
0.84% done, estimate finish Thu Feb 1 16:12:36 2007
1.26% done, estimate finish Thu Feb 1 16:12:36 2007
1.69% done, estimate finish Thu Feb 1 16:12:36 2007
2.11% done, estimate finish Thu Feb 1 16:12:36 2007
�
87.65% done, estimate finish Thu Feb 1 16:14:54 2007
88.07% done, estimate finish Thu Feb 1 16:14:54 2007
mkisofs: File too large. cannot fwrite 32768*1
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Thanks!

does it matter "copy protection" ? for the problem that i have?
my computer is alwyes get stuck while i trying to made a dvd or image
i made few disks wite menu in the past & i had not problems at all

How to create a PAR file from EAR file

Hi,
I have created an Web Dynpro Application . When i deploy it in Remote J2EE Engine, it will deploy as EAR file. It then runs as normal Web Application in Web browser. My requirement is to create an iView for my Web dynpro appn in EP. That is possible only by creating a PAR file. so How to create an PAR file from EAR in NWDS(NetWeaver Developer Studio).
How to access the EAR file in NWDS or J2EE ?
Thanks in Advance ,
By
Saravanan

Hi,
To create a iview,
log on to portal, New iView and select SAP webdynpro iview.
It will ask for namespace which is usually , local/Project Name
and application name is the name of the application.
We dont have to create par file for this requirement

Creating an xml file from recordset

Hi...
XML newbie here - so.
Is it possible to create and xml file from a recordset?
I need to create a datafeed of our e-commerce products.
Also, some of the db data contains HTML Code (product
description field),
how will this effect the xml file?
Another problem is that my xml file needs to contain url's
for the products
and product images. My ASP pages contain these URL in hard
code and then
pull the actual file names from the db
Hope that makes some sense
Thanks for any help
Andy

Hi David
Thanks for your help.
I think it will have to be option 1 as i am using Access DB.
I don't know how to go about it but will serach good old
Google.
Here is my recordset below, that pulls the required data from
Access.
The product and product image URL's need to be in the xml
file but only the
product image name and product id are in the database, e.g
image name
(imagename.jpg) productid (21)
The actual URL's are hardcoded in my ASP pages, e.g <img
src="products/medium/<%=(RSDetails.Fields.Item("Image").Value)%>"
Not sure if this makes things any clearer :-|
Thanks Again
Andy
<%
Dim RSdatafeed
Dim RSdatafeed_numRows
Set RSdatafeed = Server.CreateObject("ADODB.Recordset")
RSdatafeed.ActiveConnection = MM_shoppingcart_STRING
RSdatafeed.Source = "SELECT Products.Product,
Products.Description,
Products.Image, Products.image2, Products.ListPrice,
Products.Price,
Products.xml_feed, Manufacturers.Manufacturer,
Shipping.ShippingCost FROM
Shipping, Products INNER JOIN Manufacturers ON
Products.ManufacturerID =
Manufacturers.ManufacturerID WHERE
(((Products.xml_feed)=No));"
RSdatafeed.CursorType = 0
RSdatafeed.CursorLocation = 2
RSdatafeed.LockType = 1
RSdatafeed.Open()
RSdatafeed_numRows = 0
%>
"DEPearson" <[email protected]> wrote in
message
news:[email protected]...
> Andy,
>
> There are two ways you can create a xml file from a
recordset
>
> 1. Is to code it using Server.CreateObject(XMLDOM)
> 2. If you are using SQL server 2005, just request the RS
returns as XML
> data. using FOR XML AUTO after the where cause ( the
best way with 2005
> and
> higher sql server)
>
> The db data containing HTML code should not effect your
xml file, unless
> it
> is bad markup. You could wrap the data with
<![CDATA[the data or html
> markup, or javascript]]>
>
> If the url is a recordset field, then it will return
with the xml data.
> If
> not you can create a storage procedure that will build
your URL from the
> data
> in the database.
>
> It is best to use storage procedure (SP )for security
reason when pulling
> data
> from a MS Sql server, make all calls to the database in
a SP. Also be sure
> to
> validate the values in the querystrings before accepting
them, check for
> hack
> code.
>
> David
>

Create a xml file from an internal table: CALL TRANSFORMATION

Hello gurus,
I want to create a xml file using data from scustom table. I will create an internal table and will select some records to it.
I searched the forum and i discovered the call transformation, but when i execute the example program at the CALL TRANSFORMATION shows a dump screen.
How we create a xml file from internal table??
Please help me. I will mark the useful answers.

I'm using if_ixml class to create xml documents
TYPES: BEGIN OF xml_line,
         data(256) TYPE x,
       END OF xml_line.
DATA: o_ixml          TYPE REF TO if_ixml,
      o_document      TYPE REF TO if_ixml_document,
      o_element       TYPE REF TO if_ixml_element,
      o_streamfactory TYPE REF TO if_ixml_stream_factory,
      o_ostream       TYPE REF TO if_ixml_ostream,
      o_renderer      TYPE REF TO if_ixml_renderer.
DATA: t_xml_table     TYPE TABLE OF xml_line,
      v_xml_size      TYPE i.
o_ixml = cl_ixml=>create( ).
o_document = o_ixml->create_document( ).
* The o_document have a set of methods to add elements, attributes, etc.
o_element = o_document->create_simple_element(
                  name = 'RootNode'
                  value = 'some text'
                  parent = o_document ).
o_streamfactory = o_ixml->create_stream_factory( ).
o_ostream = o_streamfactory->create_ostream_itable( table = t_xml_table ).
o_renderer = o_ixml->create_renderer( ostream = o_ostream document = o_document ).
o_renderer->render( ).
v_xml_size = o_ostream->get_num_written_raw( ).
CALL METHOD cl_gui_frontend_services=>gui_download
EXPORTING
    bin_filesize = v_xml_size
    filename     = 'C:a.xml'
    filetype     = 'BIN'
CHANGING
    data_tab     = t_xml_table.

How I can create a XML file from java Aplication

How I can create a XML file from java Aplication
whith have a the following structure
<users>
<user>
<login>anyName</login>
<password>xxxx</password>
</user>
</users>
the password label must be encripted
accept any suggestion

Let us assume you have all the data from the jsp form in an java bean object..
Now you want a xml file. This can be acheived in 2 ways
1. Write it into a file using java.io classes. Say you have a class with name
write("<name>"+obj.getName+</name>);
bingo you have a flat file with the xml
2. Use data binding to do the trick
will recommend JiBx and Castor for the 2nd option
Regards,
Rajagopal

Creating an ISO file from FCP

Similar Messages

Maybe you are looking for