Creating button that will take you to table of contents pages

I'm using CS4 and have created a 30 page document with a table of contents (TOC) on page 2. On my master page I have previous and next page buttons that have rollover states. These work.
I want a button in the middle that will take you to the TOC page.
I have tried creating a text anchor on page 2 and setting the action of my button to go to anchor but in the button window the text anchors area is grayed out and has 'none' in it.
I also tried to have a button with a rollover state just for show (no action assigned) and putting an invisible hyperlink on top of the button. The link goes to page 2. This only works on the areas where my hyperlink does not overlap the button.
Is there a way around this?

Hi Sparkgapper,
Is this a Pages question? YOu are in the Numbers for Mac forum.
From your profile, is this an iWork '09 question?
quinn

Similar Messages

Can I create a button that will take me to a random slide in a sequence?

Let's say I have three simulations setup and the simulations start on slide 5, 15, and 23. Can I make a button that will randomly jump to one of those slides?

You have to execute that script using an event, in this case you'll use the Success event of the button that you created to 'jump'. And it will probably be an advanced action, unless you execute the JS with the On Enter event of the slide. You have two commands: first to execute the script, second to jump to that slide, for which you'll have to use a system variable cpCmndGotoSlide and the value of the variable returned by the JS. Slide numbering starts with index 0.
http://blog.lilybiri.com/system-variables-in-captivate-6
http://blog.lilybiri.com/events-and-advanced-actions
Lilybiri

How do you add a button that will email the PDF its on?

I need to create a form but they want it to have a button that will open up an email to send that PDF as an attachment or something along those lines. Is that possible?

Just a bit more info. E-mail can be used, but has potential problems -- often related to the client machine that you have no control over. Use the data submissions (either FDF or XML) rather than the full PDF so you do not have to deal with Reader Rights and the related license issues. The FDF and XML data files are easily imported into the original form so that you see what the client sees. With those aspects in mind, just go ahead and try one. Be aware that you can add form fields using the form tools in the Advanced Editing tools, OR use the forms menu that will take you to Designer. You might want to try both to see the pros and cons. Be sure to keep such a test simple so you are not wasting time on your final form just for testing. I typically create a 1 page form that has all of the possible fields for such a test.

I need instructions on how to create a button that will email a pdf form to someone else on a websit

I NEED ASSISTANCE CREATING A BUTTON THAT WILL EMAIL A PDF FORM FROM A WEBSITE TO WHOEVER THE VIEWER WANTS TO

Just a bit more info. E-mail can be used, but has potential problems -- often related to the client machine that you have no control over. Use the data submissions (either FDF or XML) rather than the full PDF so you do not have to deal with Reader Rights and the related license issues. The FDF and XML data files are easily imported into the original form so that you see what the client sees. With those aspects in mind, just go ahead and try one. Be aware that you can add form fields using the form tools in the Advanced Editing tools, OR use the forms menu that will take you to Designer. You might want to try both to see the pros and cons. Be sure to keep such a test simple so you are not wasting time on your final form just for testing. I typically create a 1 page form that has all of the possible fields for such a test.

Create a clear button that will clear a jpanel

so i have two classes. One being a frame, and the other being a panel.
On the panel, i can draw various shapes with various colours etc. The frame contains the panel, and also a north panel containing various buttons to achieve this.
What i would i need to do is create a clear button that will clear the panel.
I know i can go and set it so it's draws a rectangle the same colour as the background but that would be cheating.
I will post a section of the paint just so you get an idea.
    public void paintComponent(Graphics gPanel) {
        if (this.buffer == null) {
            Dimension d = getSize();
            this.buffer = new BufferedImage(d.width, d.height,
                    BufferedImage.TYPE_INT_ARGB_PRE);
            myLineColour = new Color(0, 255, 0);     // initial colour for drawing
            this.g2Buffer = (Graphics2D) this.buffer.getGraphics();
            this.g2Buffer.setColor(Color.white);
            this.g2Buffer.fillRect(0, 0, d.width, d.height);
            // This time we'll draw with a broad pen
        g2Buffer.setStroke(new BasicStroke(myLineWidth));
        if (myShapeFlag == 1){{
            this.g2Buffer.setColor(Color.white);
            g2Buffer.setXORMode(myLineColour); //go into the overwrite mode
            g2Buffer.drawLine(xStart, yStart, xOld, yOld); // undraw last
            g2Buffer.drawLine(xStart, yStart, xEnd, yEnd);     // draw new
            g2Buffer.setPaintMode();          // out of XOR overwrite mode
            xOld = xEnd;                    // store last end point
            yOld = yEnd;
        if(mouseReleased) {          // final time through
            g2Buffer.setColor(myLineColour);
            g2Buffer.drawLine(xStart, yStart, xEnd, yEnd);     // draw final
            mouseReleased = false;
        gPanel.drawImage(this.buffer, 0, 0, this); }Any help on this would be much appreciated

no idea how to do this.. sorry...
for the jbutton action listenener i'm not sure.
I think i'm on the right tracks with a method
    public void clearPanel(Graphics gPanel){
            g2Buffer.fillRect(100,100,100,100);     // draw final
            gPanel.drawImage(this.buffer, 0, 0, this);
}but again i think i'm way off the mark..

Firstly hello to all. I'm looking to create a vi that will take a single logged output from a thermocouple and monitor the temperature and produce a Boolean when the temperature has stabilised for a pre determined time say 1minuet.

Firstly hello to all. I’m looking to create a vi that will
take a single logged output from a thermocouple and monitor the temperature and
produce a Boolean when the temperature has stabilised for a pre determined time
say 1minuet. I have managed to find a couple of examples on the forum but one
will only run on V8.2 and I have V8, the other is for more than one channel
witch is fine I can always reduce this, but it was the timing feature I was
having difficulty with. I looking to monitor the temperature of a motor until
it has stabilised prior to testing and then to use this temperature as a
reference. Pleas forgive my ignorance if this is a very simple thing but I’ am
learning and really enjoying it. Thank you in advance for your answers.

Hi
Graham, thank you for you reply.
What I’ am trying to achieve is a vi I can use in a motor
testing setup, a part of this would be to warm the motor up until the exhaust
air temperature has stabilised, this takes approximately 10 minuets. I was
thinking of just letting the motor run for this time and leave it at this, but
some motors warm up quicker that others and. I am basically looking for a vi with
an adjustable temperature window of say ±5 C° in 1° increments, timing wise 1minuet
to 10min the adjustment is so I a can use this for another application. I tried
to adjust the code I found at the link below but had a little difficulty with
the timing. Thank you so much for your help it’s much appreciated.
sine.ni.com/niforum/niforum?forumDU=http://forums.ni.com/ni/board/message?board.id=170&message.id=251017&requireLogin=False

I am new at Captivate 8 and I have created a learning project using an existing power point presentation. I have added a button that will allow my students to view a video on the subject. When I run the project in Preview the button works but when I pub

I am new at Captivate 8 and I have created a learning project using an existing power point presentation. I have added a button that will allow my students to view a video on the subject. When I run the project in Preview the button works but when I publish it, it stops working.

I added an Interactions button and in the Actions on Success I open an URL or file. I have placed the video on our web server. In the URL I point to our web server "http://www.wmabhs.org/Media/Add Client 3rd Party Coverage.mp4". If I run this from any browser it works. So what do you think I have done wrong?

Creating a button that will Copy my view from so I can paste it to MS Word

Is there a way I can create a button that will copy my view from so I can paste it MS Word?
I know I can select the entire form and copy and paste it, but is there a way to do it via a button similar to my "Print Form" button?
Thank you.

so there isn't a button that will copy the text my view form?
instead of highlighting the data I want to easily copy it so I can paste it on a word document
I came up with a script that when a item is highlighted I click the copy to clipboard and it copies the item.
<script type="text/javascript">
function CopyToClipboard()
CopiedTxt = document.selection.createRange();
CopiedTxt.execCommand("Copy");
</script>
but is there a way I can put in the script the area I want to start the copy from instead of highlighting the text first?

How can I creat a control button that will allow the vi to run?

Instead of pressing the run button, I want to creat my own run button that will allow my vi to run.
Any idea?
Thank you

First you need to set the VI to Run When Opened (VI Properties>Execution). Then you create a front panel Boolean. On the diagram what you need to do is have some sort of idle state where nothing is done until the Boolean is pressed. It could be a separate while loop that doesn't exit until the Boolean is pressed, an Event Structure, or as part of a state machine. Look at the shippings examples Queued Message Handler, New Event Handler, Using Buttons for Options to name just a few.

On iOS 5 for iPad, is there a home button key on the Apple Bluetooth Keyboard that will allow you to go to the home screen or multitask? Perhaps by pressing the escape key or something?

On iOS 5 for iPad, is there a home button key on the Apple Bluetooth Keyboard that will allow you to go to the home screen or multitask? Perhaps by pressing the escape key or something?

Sorry, but no one who would know can discuss unreleased software such as iOS 5 in these forums. We'll have to wait, probably for the official release, before such details will be known.
Regards.

Creating text that will scroll in a text frame

I have tried to create text that will scroll in a text frame by following this:
Create your text frame including any inline buttons or hyperlinks. Make note of its width and then draw the frame you wish to hold that content. Make it about 5-7 pixels wider than the text frame and align the two, top and left. Cut the text frame to the clipboard and choose the placeholder frame. Choose edit>past into.
With that frame select, from the overlay creator panel choose pan and zoom and check the pan only option.
When I get to the overlay creator panel and choose pan and zoom, it asks me to select a cropped image. I'm not sure what I'm doing wrong. Any help would be appreciated.
Also, I am not creating any of the content on the pasteboard.
Please help. thanks

is the parenting frame cropping the inline text frame?
—Johannes

Is there a script (or plugin) that will take a photo and break it up into parts?

Is there a script or plug-in out there that will take a picture and break it up into various parts (squares for example.) The idea would be that you could automate and rapidly create a photo collage of a single image. (See examples of what I mean in attached pics.)
Thanks!
This image has been resized to fit in the page. Click to enlarge.
You get the idea.

OK, I'm going to edit this post now that I'm at a computer with an actual step by step.
Create a new comp the size of you our final delivered project.
Add a photo to the timeline
Note the size of the photo and the scale to position the photo at it's final resting place
Calculate twice the height and width of the photo and create a new solid that is this size
Place the solid above the photo
Create a mask in the solid at the exact center that is the size shape you want for your photo frame
Either invert the mask or set the mask property to Subtract to reveal a small portion of the photo
Set the solid as a alpha inverted track matte for the photo (you should now see only a portion of the photo
Add a rectangular shape layer with only a stroke to act as the photo frame over the mask. You may have to use two shapes or create a mask on a shape if you want to simulate polaroids
Make the shape layer the parent of the solid you are using as a track matte so the matte will stay lined up with the frame
Here comes the fun, select all layers and duplicate them using Ctrl/Cmnd + D
Immediately hold down Shift + Ctrl/Cmnd + } to move all duplicates to the top
Select the top shape layer and move the shape layer frame into a new position
Pre-compose the top 3 layers
Press the y key to select the Pan Benind or Anchor Point tool and move the pre-comp's anchor point to the center of the top frame
Repeat step 11 through 15 until you have arranged your montage (it might be a good idea to have a template set up as a guide layer so you know where to put the frames
Select all pre-comps and press Alt/Option + P to set a position keyframe for each pre-comp
With all of the keyframe selected move them down the timeline about 3 seconds
Now, with the CTI at the first frame drag each pre-comp into a starting position for that frame
Preview and adjust the timing, then turn on motion blur
Your images will now assemble themselves into the final montage.
There is no script that I know of that will do all of this automatically, but it would not be too hard to write a script that would do the pre-composing if you have a ton of these to do. I'm guessing that with a little practice you could have a new picture frame created and moved into position in less than a minute. It takes me about 30 seconds. That means a 20 frame sequence should take you about a half hour. It might not be worth writing a script unless you have a ton of these to do. Select the bottom three layers and duplicate (Ctrl/Cmnt + D), group them at the top (Shift + Ctrl/Cmnd + } ), move the top frame layer into position, then Shift + Ctrl/Cmnd + C to pre-compose, then move the anchor point of the pre-comp, then do it again.... When you're done set a few keyframes.
As I said, you could write a script, but you'd need a different script to move each frame into position and the script would only work for one layout. If you made a template to put on the bottom so you knew where do place the frames and which order you wanted them you could do this by hand very quickly. The sample project that I'm including which was just quickly thrown together took me less than 10 minutes. Replace my photo with one of yours and you'll get the idea.
Dropbox - photoMontage1_CS6.aep (Note: Dropbox will probably add a .txt extension to the .aep file. Just delete it and you should be able to open the project.

Is a W5xx the only way to get a thinkpad that will take 4 sodimms?

Hi Guys,
From my research, it looks like the W series is the only way I can get a thinkpad that will take 32gb of RAM. Ideally I would love a T430 as I like the slightly smaller form factor.
I have seen a reference though to T530 with a quad core CPU offering 4 slots as well, but haven't found anything to back that up.
So am keen to hear what you guys have to say.
Thanks
Gordon
Solved!
Go to Solution.

harrisb wrote:
ibmthink wrote:
Yes, T530 has 4 Slots when you get one with a Quad-Core CPU.
And no, the T430 takes a maximum of 16 GB. You can´t get the T430 with 32 GB of RAM.
That is correct. From PSREF:
dual-core model:
16GB max7, two 204-pin SO-DIMM sockets
quad-core model:
32GB max, four 204-pin SO-DIMM sockets
All:
PC3-12800 1600MHz DDR3, non-parity, dual-channel capable
Are we talking about T or W here?
I'm getting confused. I don't see any 4-slot option in the PSREF/tabook for the T530.
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

TS1424 how do i cancel a download that will take 39 hours?

how do i cancel a download that will take 39 hours?

You just made me feel better. I'm ticked it will take 6 hours to download one episode of breaking bad. I can't decide who I'm more frustrated with...appletv or dish network.

How do I create buttons that once clicked and un clicked, alter an image? ...

How do I create buttons that once clicked and un clicked, alter an image?
So for example if I imported a psd file into Muse with 5 layers, could i create 5 buttons which, when clicked, each individually took off and added 1 layer?
Basically this should make what i'm trying to say clear (when it's loaded click the arrow and you'll see): http://lust.nl/lustArchive/noordzee/noordzee.html
Appreciate any help

Hi Joe,
Please use this option to hide the target on click - http://prntscr.com/3plqn0
- Abhishek Maurya

Creating button that will take you to table of contents pages

Similar Messages

Maybe you are looking for