Creating Chapters for Widescreen QT exports

I'm filming in widescreen on a Sony HDR-HC1, using FCE HD 3.5, and exporting QT to burn in iDVD 5.
The Quicktime export settings, at least for the basic movie export, doesn't support widescreen, yet it allows for chapter creation.
How, in the custom QT settings, can I set up chapter markers for export to iDVD 5?
I had them all set up in the FCE timeline, but they didn't show up in my iDVD movie.
Powerbook G4 15in 1.67ghz Mac OS X (10.4.7)

Yes, they've got the <CHAPTER> markers, and I avoided the first chapter at the beginning.
Exporting by File/Export/Quicktime conversion doesn't seem to offer any method of keeping the chapter markers.
It could be that my original sequence was set up wrong, but I experimented endlessly (much to the demise of my free hard drive space).
I'll keep trying. Any input is greatly appreciated.
Powerbook G4 15in 1.67ghz Mac OS X (10.4.7) Lacie ext. 250GB triple interface; iMac 400 Indigo (very tired)

Similar Messages

Using GB'08 to create Chapters for iMovie'08 -- audio does not export

After fighting though learning Final Cut Express (oops I mean iMovie '08), I got a movie together. Then I wanted chapters, so I found a great article (http://imovie08.blogspot.com/2007/08/how-to-add-chapter-markers.html) showing that the only way to make them in a logical way was via GarageBand'08.
However, when I send the movie to iDVD, the audio does not make it (silent when I play the movie - either in preview mode or on the burned disc). Furthermore, I tried to "Export Movie to Disk" to see if GB was not outputting or if it was an iDVD issue of receiving. I found that the export also came over with no audio.
Please advise!

I am having the same exact problem. I have Final Cut Pro on my production computer at work, but I wanted to do some personal stuff at home on my MB Pro. I have like 15 old family 8mm home videos that I want to convert to DVD's for my parents for Christmas, so I used some of my hardware for A to D conversion to get these marathon 2 hour movies on my ext. Hard Drive. But of course you can't make chapter markers in the new iMovie '08, so I have to export to "media browser" and then switch to GarageBand to do this simple task. But unfortunately when I "share" from GarageBand to iDVD, disk, or even iTunes I get absolutely no audio. Ridiculous.
Not to mention the fact that these home videos are two hours long and it takes a freakin hour for it to compress/export just to find out there's an issue. And even before I realized there was no audio, I was having an amazingly awesome time in iDVD as it was lagging so badly that I considered putting my TV on to pass the time while I clicked and held on one of the folders waiting for it to highlight so I could move it. Then it was great to find out that all that time I spent in iDVD was in vain because there was no audio on the movies anyways!!!! yaaayyyy!!!
Obviously other people have presented this same GarageBand movie sharing audio issue and have received no good solutions as of yet, so I don't even know why I'm here posting this. It's 4:00 AM, and I've been fussing with this crap for over 8 hours now. I'm just going to do it all at work on more capable software (Final Cut, DVD Studio).
I just figured that I didn't have to do anything special to these home-videos editing-wise, why not just take advantage of my "cool" new iLife software? And do it on my spare time at home? Why not? Because they've made iLife so retard-proof that it's self destructing before my very tired eyes.
iLife? more like cryLife.

HT4168 epub: I'd like to create chapters for the TOC but don't want the new chapter to begin on a new page. I'd like it to begin on the same page as the prior chapter. How can I do that?

How can I do this? I currently have my TOC chapters listed as Apples, Oranges, and so on. But my text chapters begin something like this:
1
Apples
2
Oranges
I have "Apples" with header 1, "Oranges" with header 1, etc., so that very nicely in the TOC it is listing my topics as the chapters. However, within the body of the document, 1 appears on one page and "Apples" begins at the top of a new page, separated from "1"; 2 appears one one page and "Oranges" appears at the top of the next page (separated from the "2), and so on.
Because of the way the book is structured, I need to have the chapter numbers on a top line and the chapter topic beneath it. (The book is further subdivided, such as 1.3a, 1.3b, etc.)
What I would like is for the TOC to indicate my chapters as Apples, Oranges, etc., but for the chapter text to begin as indicated above.
How can I do this? Thanks.

Peter, I styled the wording of the chapter title (e.g. apples) with my heading1 styling and my sub-chapter titles were heading2. The text is a different font, different color, different size, different everything. It seems that the epub program has an automatic format to start a new page with each new header. That's what I'm trying to work around. (Originally I styled both the numeral and the chapter title as "heading 1" and it gave each a different page!)
I am in the process of removing all headers and styling everything manually (which is how it was originally) just to avoid this problem.
I'm having my e-book done through a publisher (this will be self-published), so I'll be giving them a .docx and they'll convert it to .html (filtered) then .epub. so I need something that creates my Table of Contents as I'd like it, without messing up the text of the book.
I can give them a list of what I want in the Table of Contents, and have them manually do it, but the TOC may or may not come out how I want it to come out. My preference is to have something automatic. I wanted the sub-units (heading 2) in the TOC but that will never work since I have over 200 of them and it's too much for them to do manually. It's a very slow process.

Best way to create chapters for IDVD

Ok, so I got ILife '08 and downloaded this for free so I could make chapters. Let's say I take a whole feed from my VCR to my computer using the Elgato Hybrid. What is the easiest way to make clips using iMovie? Should I split the clips into smaller clips, or use the part about chapters?

I use iDVD because it is easy to use.
My head is already crammed with HD, Avid, FCP, After Effects Photoshop, Pro Tools and Grass Valley information...not to mention all the knowledge on the art of the edit...so that I don't have much room left for DVDsp.
Shane

Creating chapters for iPad video

I understand that chapters can be added to videos using Quicktime Pro. If I do this, will I be able to see the chapters on an iPad? I don't want to pay the upgrade price and find out it doesn't work. Has anyone done this or willing to do a quick test for me?
Thanks!

I understand that chapters can be added to videos using Quicktime Pro. If I do this, will I be able to see the chapters on an iPad? I don't want to pay the upgrade price and find out it doesn't work. Has anyone done this or willing to do a quick test for me?
Thanks!

I can't get garageband to export! It keeps getting stuck at 'creating chapters' when I try to export my enhanced podcast. Please help!

I am trying to export my enhanced podcast through garageband. I have all the current updates. I am on my MacBookPro 10.6.8 2.3GHz with 8GB ram. My enhanced podcast (podcast with pictures) is about 80 mins long and I have tried exporting with everything from the lowest settings to the highest always with the same result. I have tried deleting GB preferences. I have tried repairing permissions to no avail.
I hit export to disk or send to itunes.
I select some AAC format I want (optimized for spoken podcast).
It slowly builds the mix, normalizes, and creates chapters (yeah, it goes through the creating chapters bar to completion)
Then it goes all candystripe on the creating chapters bar once it fills up and will hang forever (hung for 8 hours....pretty much sounds like 'forever' in my book).
Please help...I have my podcast sitting there waiting to be used....I have tried exporting smaller chunks (by moving the end of file bar) but that doesn't work either. Is there a way to just send the pictures and the picture start times over to imovie and work with it there? I'd much rather work with the tools that imovie has but man that program is just a PITA to use when you want to run through 100+ pictures for variable durations (whereas it's easy to just drag and drop with garageband as you do playback).
The file only has one stereo audio track!

Hi notmatthew, I have exactly the same problem as you. I am trying to export a podcast about iPod X Anniversary so I need to publish it next sunday.
It's midnight in Spain but tomorrow I will tray something I read in other post:
w4b3l said:
Problem solved.
I deleted the chapters one by one, exporting it each time, until it worked. i then replaced the image (which was a .jpg and i converted to .png) with that chapter and now it works.
Could you try it?

Cannot export video clips. Get message: "unable to create video for export"

Cannot export video clips from iPhoto to Finder folder. Export fails with message "unable to create video for export: "
The video clips play correctly within iPhoto.
Software: iPhoto version 9.5 on OSX 10.9
Hardware: Retina Macbook Pro 2.3 i7 8GB

Yes. I have 3,184 video clips in this library. I tested Reveal function by randomly selecting individual video clips and in every case the Reveal in Finder function worked correctly. I also tested this on random selections of groups of video clips and, again, the Reveal function worked correctly in every case.
Some more info that may be relevant:
I have multiple iPhoto libraries. My "main" library is very large (~30,000 files) and is located on an external hard drive (2TB WD) which is connected via USB.
The problem reported here is occuring on that "main" library. I have not opened any other iPhoto library since installing the new release.
While the File>Export function does not work, I have been able to simply copy and paste video clips from iPhoto library to a folder on Mac hard drive. It appears that meta data is copying correctly along with the video content.
I am able to import these copied video clips to iMovie. Meta data is imported along with the video content and I'm able to perform iMovie editing functions on those clips without any problems.
In summary, the File>Export function still fails with the message "unable to create video for export." Copying video clips and pasting them to interim folder seems to be a viable workaround enabling me to extract video clips from iPhoto for import to iMovie. I will run additional tests to see if I can find a pattern to the video files that are being rejected by iPhoto Export function.

How should we be going about creating and saving and/ or exporting our ODC files using Excel 2013 for use in Project Server 2013 Online?

Hi I need your guidance on how I should go about setting up my Excel 2013 reports so that others in our Project Online 2013 environment can access and updates these reports of mine.
My questions are as follows:
I presume I need to create and save my ODC files in a PWA > Data Connections folder. I have English and French users in our environment. Do I need save them twice? Once in the French and again in the English Data Connections folder?
Likewise for the Excel file?
How should I go about creating my ODC files within Excel? By default, the ODC files are being created on my PC's > My Documents > My Data Sources folder. I presume I need to get them saved or exported to the PWA > Data Connections
folder. So, How should I be going about creating and saving and/ or exporting the ODC files???
FYI...My oData Feeds that I wish to use and join in this particular Excel file are as follows:
https://cascades.sharepoint.com/sites/pwa/_api/projectdata/AssignmentTimephasedData01T00:00:00'
https://cascades.sharepoint.com/sites/pwa/_api/projectdata/Projects()?$select=ProjectId,ProjectName,CAS_Classification,CAS_PCO,CAS_IT_Department,CAS_Program,CAS_SubProgram
https://cascades.sharepoint.com/sites/pwa/_api/projectdata/TimeSet()?select=TimeByDay,TimeDayOfTheWeek$filter=TimeByDay ge datetime'2014-10-19T00:00:00'
https://cascades.sharepoint.com/sites/pwa/_api/projectdata/Resources()?$select=ResourceId,ResourceName,Programs,Supplier,Source,Role,CostType
Thanks in advance,
\Spiro Theopoulos PMP, MCITP. Montreal, QC (Canada)

Thank you Guilaume. May I ask you to help clarify a bit more for me? If I have to do it for both languages (the reports and ODC files), do I simply copy the same ODC files from e.g., the English to French folder in PWA (Odc files)? Or does
that defeat the purpose? Or, do I need to create a new set of oData Feed Connection files with a French version of Excel 2013 and save them to the French Data Connections folder in PWA? Do I need to have a French version of Excel 2013 to create
French ODC files and ultimately French based reports and/ or vice versa?
I did notice that the following oData metadata command from within a browser produces different results (ie., English versus French metadata returned) depending on who runs it (i.e., French or English user, etc). As you can see I am a bit confused.
Any help you can provide would be greatly appreciated.
https://XXXXX.sharepoint.com/sites/pwa/_api/projectdata/$metadata
\Spiro Theopoulos PMP, MCITP. Montreal, QC (Canada)

Alternative to GarageBand for creating chapters in podcasts?

Now that GarageBand no longer has podcast-creation-specific features, I'm wondering if there's another way to create chapters in podcasts. Anyone know? I know I can just keep using the old version, but I'd like to find a solution that hasn't been discontinued.

Hi Photosphere,
Apologies for the delayed response, my daughter was born on Sunday.
Thanks for taking the time to try our product.
Could you please explain what podcasting features you feel are missing?
Some of the podcasting features that many thousands of our professional and amateur podcasting customers appreciate are:
* Create chapters (which is what this thread started with)
* Auto-leveling of recording based on Loudness
* User-friendly interface
* Voice Profiler that analyses your speak and sets the EQ and compression for you so you sound the best every time
* 1-click podcast allows you to upload your podcast to multiple destinantions (SoundCloud account, Podcast server, FTP etc) with one click in the correct format, amnd updates your RSS feed at the same time
* Extremely fast support response
You might find more of the features you are looking for in our Video Tutorials: http://hindenburgsystems.com/training-videos
Addressing your comments:
- Regarding pricing - unfortunately the podcasting and radio markets are not that big. Selling it for "a decent price and getting more customers" assumes that there are a lot of people that actually would buy software to make a podcast. Our analysis is that this is not the case - if we lower our price we will not sell significantly more copies of our software. $95 for a highly advanced software tool is not much compared to the price of a microphone or whatever recording device you use for your podcast, is it?
- "Your website is out of date, the registered trademark of your company site is 2011" - Normally a trademark date is the date a trademark is registered - it doesn't really change. I'm not quite sure what you are refering to.
- "I find it hilarious that you chose the company name to be Hindenburg Systems... Hindenburg crashed and burned" - A little radio history, the event of the Hindenburg crashing is one of the most important daes in radio/recorded story history. It was the first ever mobile news report and the first ever report broadcast coast-to-coast. Besides that, Hindenburg is a surname, so there are other connotations than the limited history of one event in Lakehurst in 1937.
I hope that clarifies things a bit?

You cannot create ARE3 for duty paid Deemed exports excise invoice!

You cannot create ARE3 for duty paid Deemed exports excise invoice!
Message no. 4F326

Hi murali,
How can you create ARE document for duty paid excise invoice
ARE docs are for excise exption purpose only
regards
bvdv

Is there (or can I create) a keyboard shortcut for the command "export"?

is there (or can I create) a keyboard shortcut for the command "export"?

Keyboard Shortcuts are created in the System Preferences app, Hardware section, Keyboard, Keyboard Shortcuts tab.
Select Application Shortcuts on the left.
Click the "+" sign on the right and in the dialog box that pops up, enter: "Export..." and your preferred key combination. Here's an example:
Keep in mind that when you enter the name of the action in a layered menu, such as File > Export..., or Share > Export..., you are only going to enter the last menu choice, not the higher levels.
Regards,
Jerry

Create file for export data from Essbase

I wish to create dynamically CalcScript for an unloading of the data from Essbase.
For this purpose I have created variables for each measurement.
How to create procedure for generate a file with my variables?
Thanks.

Hi,
There are a number of ways of doing this, you could use the odiOutFile tool and write your script into the text, replacing parts of the text with your ODI variables.
Or you can hold the script in say a db table or file and then create an interface to write a file, it should replace the variable text with your ODI variables if you declare them in a package.
Cheers
John
http://john-goodwin.blogspot.com/

Dividing or creating tracks for one long Live Performance Wav file

Hello
I recorded a two hour show the other night, I would like to cut it up into sections or songs
for a CD, What would be the best approach in LOGIC.
Thanks so much
Troy

Hey, Troy:
I would not use Logic as it is akin to building a bonfire to light a cigarette. I would use Amadeus Pro, Audacity, or something like that. I think Audacity might be freeware, Amadeus is shareware. Loading 1 hour of raw audio into Logic (on my system), takes about 2.5 minutes. Loading it into Amadeus takes 15 seconds. Manipulating it (for this kind of relatively simple task), has Logic lumbering around, where Amadeus is quick and agile. I use Amadeus to "burst" the recording of old audio cassettes into individual mp3's. I assume your need is about the same.
For using Logic, if you must, begin by reading through the related chapters in the manual for audio: Import/export, "bounce" (how you will eventually get each "section or song" out of Logic on an individual basis), and on manipulating audio data. You'll need the latter to trim each portion you identify as a section/song.
First you'll drag the audio file you originally recorded to Logic in the dock. Once opened in Logic drag the item from the Audio Bin window into the arrange window. Then you'll select the beginnings and endings of the sections/songs you want to house it separately as its own track.
I might do it this way: Use "New Tracks" to create 12-15 open audio drag o tracks. Use the marquee tool to cut a section from the full track, go to an open track and paste the cut section in. Repeat until finished. But there may be boatloads of ways to do this. Some might do much of this in Audio Bin screen. (I'd like to hear other views, btw.)
Eventually you'll "bounce" the individual tracks to individual aiff files on your hard drive for eventual inclusion on a CD. Make sure you've identified the one track you want to output, muting all others, and that you have indicated and "end of song" marker in the bar rule. When you perform the bounce to hard-drive, Indicate PCM and AIFF.
For burning to a CD, I assume there are a few "native" ways to do this using, say, iTunes or some other program that comes with any Mac. Me, I use Toast to burn audio CD's.
Is this the kind of information you were looking for?
-- Gerry

GarageBand crashes whilst creating chapters!

Hi
I have been created over 100 podcasts, all working fine, but for some reason im having trouble exporting 1.
Its an hour music track with about 25 chapters, with titles and images. When i "export podcast to disk" it stops halfway though "creating chapters"
I have tried replacing the images because a couple were over 1000 pixels, and replaced any symbols like : but have had no joy.
I havnt done anything different from any of the 100+ i have done previously so i cant understand why its crashing.
Does any one have any suggestions?
Is there an error log so i can see what chapter its crashing?
thanks

Please pardon the intrusion…
Hi, Christoph!
Congratulations on advancing to Level 4!
At the Water Cooler in the Level 4 Lounge, we are throwing virtual confetti in celebration of your attainment of Level 4-dom. Would you care to join us at the Water Cooler?
On the Discussions Home Page, down at the bottom, you will, hopefully, soon find the Lounge link available to you. It should show up for you within the next 24 hours if all goes as it should.
Hope to see you there soon!

How 2 creat report for displaying the details of a Delivery Document using

how to create report for displaying the details of a Delivery Document using the tables LIKP, LIPS
thank you
regards,
jagrut bharatkumar shukla
points will be rewarded

HI
I AM GIVING YOU MY DELIVERY DOCUMENT CODE...MODIFY IT ACCORDING TO YOUR REQUIREMENT
*& Report ZDELIVERY                                *
report zdelivery message-id z9bhu          .
types: begin of t_likp,
           vbeln type likp-vbeln,      "Delivery
           erdat type likp-erdat,      "Date for rec creation
*           LFDAT TYPE LIKP-LFDAT,      "Delevery Date
*           WAERK TYPE LIKP-WAERK,      "Currency
           kunnr type likp-kunnr,      "Ship-To Party
           kunag type likp-kunag,      "Sold-to party
           traty type likp-traty,      "Means-of-Transport
       end of t_likp.
types: begin of t_lips,
           vbeln type lips-vbeln,      "Delivery
           posnr type lips-posnr,      "Delivery item
           matnr type lips-matnr,      "Material Number
           arktx type lips-arktx,      "Short Text for Sales Order Item
           lfimg type lips-lfimg,      "Actual quantity delivered
           netpr type lips-netpr,
*           MEINS TYPE LIPS-MEINS,      "Base Unit of Measure
           vgbel type lips-vgbel,      "Doc no of the reference document
        end of t_lips.
types: begin of t_vbpa,
           vbeln type vbpa-vbeln,      "SD DocumenT Number
           posnr type vbpa-posnr,      "Item number
           parvw type vbpa-parvw,      "Partner function
           kunnrb type vbpa-kunnr,      "Customer Number 1
       end of t_vbpa.
types: begin of t_kna1,
           kunnr type kna1-kunnr,      "Customer Number 1
           name1 type kna1-name1,      "Name 1
           ort01 type kna1-ort01,      "City
           adrnr type kna1-adrnr,      "Address
       end of t_kna1.
types: begin of t_li_vbpa,
           vbeln type likp-vbeln,      "Delivery
           erdat type likp-erdat,      "Date for rec creation
*           LFDAT TYPE LIKP-LFDAT,      "Delevery Date
*           WAERK TYPE LIKP-WAERK,      "Currency
           kunnr type likp-kunnr,      "Ship-To Party
           kunag type likp-kunag,      "Sold-to party
           traty type likp-traty,      "Means-of-Transport
           vbeln1 type lips-vbeln,      "Delivery
           posnr type lips-posnr,      "Delivery item
           matnr type lips-matnr,      "Material Number
           arktx type lips-arktx,      "Short Text for Sales Order Item
           lfimg type lips-lfimg,      "Actual quantity delivered
           netpr type lips-netpr,      "Net Price
*           MEINS TYPE LIPS-MEINS,      "Base Unit of Measure
           vgbel type lips-vgbel,      "Doc no of the reference document
           vbeln3 type vbpa-vbeln,     "SD DocumenT Number
           parvw type vbpa-parvw,      "Partner function
           kunnrb type vbpa-kunnr,      "Customer Number 1
       end of t_li_vbpa.
types: begin of t_final,
           vbeln type likp-vbeln,      "Delivery
           erdat type likp-erdat,      "Date for rec creation
           kunnr type likp-kunnr,      "Ship-To Party
           kunag type likp-kunag,      "Sold-to party
           traty type likp-traty,      "Means-of-Transport
           vbeln1 type lips-vbeln,      "Delivery
           posnr type lips-posnr,      "Delivery item
           matnr type lips-matnr,      "Material Number
           arktx type lips-arktx,      "Short Text for Sales Order Item
           lfimg type lips-lfimg,      "Actual quantity delivered
           netpr type lips-netpr,      "Net Price
           vgbel type lips-vgbel,      "Doc no of the reference document
           vbeln3 type vbpa-vbeln,     "SD DocumenT Number
           parvw type vbpa-parvw,      "Partner function
           kunnrb type vbpa-kunnr,     "Customer Number 1
           name1 type kna1-name1,      "Name 1
           ort01 type kna1-ort01,      "City
           adrnr1 type kna1-adrnr,     "Address
           name2 type kna1-name1,      "Name 1
           ort02 type kna1-ort01,      "City
           adrnr2 type kna1-adrnr,     "Address
           name3 type kna1-name1,      "Name 1
           ort03 type kna1-ort01,      "City
           adrnr3 type kna1-adrnr,     "Address
       end of t_final.
*            D A T A D E C L A R A T I O N
*&*********Internal Table Declaration****************&*
data: it_likp type standard table of t_likp.
data: it_lips type standard table of t_lips.
data: it_vbpa type standard table of t_vbpa.
data: it_kna1 type standard table of t_kna1.
data: it_li_vbpa type standard table of t_li_vbpa.
data: it_li_vbpa_temp type standard table of t_li_vbpa.
data: it_final type standard table of t_final.
*&*********Work Area Declaration********************&*
data: wa_likp type t_likp.
data: wa_lips type t_lips.
data: wa_vbpa type t_vbpa.
data: wa_kna1 type t_kna1.
data: wa_li_vbpa type t_li_vbpa.
data: wa_li_vbpa_temp type t_li_vbpa.
data: wa_final type t_final.
*&*********Data Declaration************************&*
data: d_vbeln type likp-vbeln.
data: flag type i value 0.
*           S E L E C T I O N S C R E E N   D E C L A R A T I O N
selection-screen begin of block block2 with frame title text-001.
select-options: s_vbeln for d_vbeln obligatory.    "Delivery no
selection-screen end of block block2.
*            A T S E L E C T I O N - S C R E E N   E V E N T S
*AT SELECTION-SCREEN.
*PERFORM VALIDATE_DATA.
*            S T A R T   O F S E L E C T I O N     E V E N T S
start-of-selection.
perform fetch_data.
perform merge_data_kna1.
*INCLUDE Z9BT_SH_***4_FORMS.
call function 'OPEN_FORM'
exporting
*   APPLICATION                       = 'TX'
*   ARCHIVE_INDEX                     =
*   ARCHIVE_PARAMS                    =
    device                            = 'PRINTER'
*   DIALOG                            = 'X'
*   FORM                              = ' '
   language                          = sy-langu
*   OPTIONS                           =
*   MAIL_SENDER                       =
*   MAIL_RECIPIENT                    =
*   MAIL_APPL_OBJECT                  =
*   RAW_DATA_INTERFACE                = '*'
*   SPONUMIV                          =
* IMPORTING
*   LANGUAGE                          =
*   NEW_ARCHIVE_PARAMS                =
*   RESULT                            =
exceptions
   canceled                          = 1
   device                            = 2
   form                              = 3
   options                           = 4
   unclosed                          = 5
   mail_options                      = 6
   archive_error                     = 7
   invalid_fax_number                = 8
   more_params_needed_in_batch       = 9
   spool_error                       = 10
   codepage                          = 11
   others                            = 12
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
sort it_final by vbeln.
loop at it_final into wa_final.
call function 'START_FORM'
exporting
*   ARCHIVE_INDEX          =
   form                   = 'Z9BT_DELIVERY'
   language               = sy-langu
*   STARTPAGE              = ' '
*   PROGRAM                = ' '
*   MAIL_APPL_OBJECT       =
* IMPORTING
*   LANGUAGE               =
exceptions
   form                   = 1
   format                 = 2
   unended                = 3
   unopened               = 4
   unused                 = 5
   spool_error            = 6
   codepage               = 7
   others                 = 8
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function 'WRITE_FORM'
exporting
   element                        = 'ITEM_LIST'
   function                       = 'SET'
   type                           = 'BODY'
   window                         = 'MAIN'
* IMPORTING
*   PENDING_LINES                  =
* EXCEPTIONS
*   ELEMENT                        = 1
*   FUNCTION                       = 2
*   TYPE                           = 3
*   UNOPENED                       = 4
*   UNSTARTED                      = 5
*   WINDOW                         = 6
*   BAD_PAGEFORMAT_FOR_PRINT       = 7
*   SPOOL_ERROR                    = 8
*   CODEPAGE                       = 9
*   OTHERS                         = 10
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function 'END_FORM'
* IMPORTING
*   RESULT                         =
exceptions
   unopened                       = 1
   bad_pageformat_for_print       = 2
   spool_error                    = 3
   codepage                       = 4
   others                         = 5
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endloop.
call function 'CLOSE_FORM'
* IMPORTING
*   RESULT                         =
*   RDI_RESULT                     =
* TABLES
*   OTFDATA                        =
exceptions
   unopened                       = 1
   bad_pageformat_for_print       = 2
   send_error                     = 3
   spool_error                    = 4
   codepage                       = 5
   others                         = 6
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
*&      Form VALIDATE_DATA
*       text
* --> p1        text
* <-- p2        text
form validate_data .
select single vbeln into wa_likp-vbeln
                    from likp where vbeln in s_vbeln.
append wa_likp to it_likp.
if sy-subrc <> 0.
flag = 1.
endif.
endform.                    " VALIDATE_DATA
*&      Form FETCH_DATA
*       text
* --> p1        text
* <-- p2        text
form fetch_data .
select a~vbeln
       a~erdat
       a~kunnr
       a~kunag
       a~traty
       b~vbeln
       b~posnr
       b~matnr
       b~arktx
       b~lfimg
       b~netpr
       b~vgbel
       c~vbeln
       c~parvw
       c~kunnr
         into table it_li_vbpa
                from likp as a
                left outer join lips as b on a~vbeln = b~vbeln
                inner join vbpa as c on b~vgbel = c~vbeln
                where a~vbeln in s_vbeln and
                c~parvw = 'RE'.
endform.                    " FETCH_DATA
*&      Form MERGE_DATA_KNA1
*       text
* --> p1        text
* <-- p2        text
form merge_data_kna1 .
if it_li_vbpa[] is not initial.
it_li_vbpa_temp[] = it_li_vbpa[].
sort it_li_vbpa_temp by kunnr.
delete adjacent duplicates from it_li_vbpa_temp comparing kunnr.
loop at it_li_vbpa into wa_li_vbpa.
read table it_li_vbpa_temp into wa_li_vbpa_temp with key kunnr =
wa_li_vbpa-kunag.
if sy-subrc <> 0.
wa_li_vbpa_temp = wa_li_vbpa.
append wa_li_vbpa_temp to it_li_vbpa_temp.
endif.
read table it_li_vbpa_temp into wa_li_vbpa_temp with key kunnr =
wa_li_vbpa-kunnrb.
if sy-subrc <> 0.
wa_li_vbpa_temp = wa_li_vbpa.
append wa_li_vbpa_temp to it_li_vbpa_temp.
endif.
endloop.
endif.
if it_li_vbpa_temp[] is not initial.
select kunnr
        name1
        ort01
        adrnr into table it_kna1 from kna1
                    for all entries in it_li_vbpa_temp
                    where kunnr = it_li_vbpa_temp-kunnr.
endif.
loop at it_li_vbpa into wa_li_vbpa .
wa_final-vbeln = wa_li_vbpa-vbeln.
wa_final-erdat = wa_li_vbpa-erdat.
*it_final-LFART = it_li_vbpa-LFART.
wa_final-kunnr = wa_li_vbpa-kunnr.
wa_final-kunag = wa_li_vbpa-kunag.
*it_final-VSTEL = it_li_vbpa-VSTEL.
wa_final-traty = wa_li_vbpa-traty.
wa_final-vbeln1 = wa_li_vbpa-vbeln.
wa_final-posnr = wa_li_vbpa-posnr.
wa_final-matnr = wa_li_vbpa-matnr.
wa_final-arktx = wa_li_vbpa-arktx.
wa_final-lfimg = wa_li_vbpa-lfimg.
wa_final-netpr = wa_li_vbpa-netpr.
*wa_final-GEWEI = it_li_vbpa-GEWEI.
*it_final-VOLUM = it_li_vbpa-VOLUM.
*it_final-VOLEH = it_li_vbpa-VOLEH.
wa_final-vgbel = wa_li_vbpa-vgbel.
wa_final-vbeln3 = wa_li_vbpa-vbeln.
*wa_final-PARVW = wa_li_vbpa-PARVW.
wa_final-kunnrb = wa_li_vbpa-kunnrb.
read table it_kna1 into wa_kna1 with key kunnr = wa_li_vbpa-kunnr.
if sy-subrc = 0.
wa_final-name1 = wa_kna1-name1.
wa_final-ort01 = wa_kna1-ort01.
wa_final-adrnr1 = wa_kna1-adrnr.
endif.
read table it_kna1 into wa_kna1 with key kunnr = wa_li_vbpa-kunag.
if sy-subrc = 0.
wa_final-name2 = wa_kna1-name1.
wa_final-ort02 = wa_kna1-ort01.
wa_final-adrnr2 = wa_kna1-adrnr.
endif.
read table it_kna1 into wa_kna1 with key kunnr = wa_li_vbpa-kunnrb.
if sy-subrc = 0.
wa_final-name3 = wa_kna1-name1.
wa_final-ort03 = wa_kna1-ort01.
wa_final-adrnr3 = wa_kna1-adrnr.
endif.
append wa_final to it_final.
clear wa_final.
endloop.
endform.

Creating Chapters for Widescreen QT exports

Similar Messages

Maybe you are looking for