Creating component model diagram

Dear SDN,
I am trying to create a component model using Borland 2008 . I am refering the SAP LIbrary link .
However I am not getting the PublicPart image as described in the SAP Library.
Anyone has the similar experience . Any suggestion are welcome
http://help.sap.com/saphelp_nw04/helpdata/en/1c/bca99c220c0e45a1cae3c4cccf4346/content.htm

Hi
Take the help from [this|Re: Public Parts; and [this|Re: How can I consume the Public Part of a DC from a local DynPro project?; and [this|Multi DC architecture;
I am mentioning some point which confused you in that figure.
1. A component behaves like a u201Cblack boxu201D, which implies that its inner parts are not visible from the outside.A component can define any number of public parts, each of which must have a unique name. A particular development object can be named in more than one public part. This allows you to organize public parts according to functional view points. (Simple taken from the source)
2. In the figure below, component X is on the same hierarchy level as component Y: consider it like DC X and DC Y(same hierarchy)
3. Keep this point in mind that cyclic dependency is not at all possible, now try to figure out any such cases where two component say A & B using each other (A<=====>B), in this way might u will identified
the use cases(ultimately which is the objective )
Hope it helpful for you.
Best Regards
Satish Kumar

Similar Messages

Trouble with opening/creating Server Model Diagrams

I created server model diagrams by drag-and-dropping specific tables from the Server Model Navigator. Is it supposed to take a LONG time
for this step (e.g., 3 whole minutes for one table) or should it be basically "immediate"? They eventually made it, but seemed unreasonably long!
I saved the diagrams, quit, and come back to the repository, see the diagram names, click on a diagram, verify the elements inside, everything
looks good -- until I try to open the diagram, it (Design Editor) locks up every time!!
Does anybody know why I'm having either one of the above problems? Is there any setting I need to configure?
(By the way, I'm using Designer 6i with an Oracle 8.1.7 database.)
Thanks in advance.
Brenda

Could be your memory. Designer takes alot to run, as you may know. Minimum should be 256mb. Close all apps and try to open
the diagram again. I have had lots of trouble with my designer locking up!

How to customize Category and Category items list while creating New Model

Hi,
what the most convenient way to customize the Category and Category items list while creating New Model?
This is standard:
Now, what we want to achieve, is to customize this menu, to:
1. Display in the Category window only f.e. two categories:
- EA Diagrams
- BPM Diagrams
2. In the EA Diagrams, we want to have f.e. four copies of City Planning diagram, each of them should have different elements available, f.e. in the first copy, only Architecture Areas shall be made available, in the second one Architecture Areas and Business Functions, in the third on f.e. only Business Functions shall be made available. Additionally, it should behave like a hierarchy ... meaning you can create the second diagram, only as child (related diagram) of the first diagram etc.
I know, excluding the particular diagrams/diagram elements can be configured using the right/profile settings, but how to:
1. Customize the standard New Model menu window
2. Create copies of City Planning Diagrams with different set-ups
3. Set the relationship between diagrams
Is such a configuration change possible?
Thanks a lot for your help!
Regards,
Rafal

Now, what we want to achieve, is to customize this menu, to:
Question #1. Display in the Category window only f.e. two categories:
- EA Diagrams
- BPM Diagrams
Click on Tools => General Options=> Model Creation
Click on Properties => at right of Default category set
Note : Model template does not work as Category. We can't set. An enchancement request has been open to SAP
In the following example I defined a new default (MyNewDefault.mcc). As you can see only BPMN models are available.
To create a new category set with BPMN choice
a) Copy default.mcc in MyNewDefault.mcc file.
    Go to Tools=>General Options=>Model Creation : Select your new category
    Go to Tools=>General Options=>Model Creation : Edit properties and remove all things you does not want keep
or
b) Go to Tools=>General options=>Model Creation : Edit properties and click on Save as button and specify the file name "MyNewDefault".
    Quit the window.
    Select you new category : Go to Tools=>General Options=>Model Creation : "MyNewDefault"
    Edit properties and remove all things you does not want keep.
    Save you new category
Question #2. How to define copies/replicas of existing diagrams
     Wrote an extension
Question #3. How to make sure, particular diagrams can be used (created) only on predefined "levels" and how to set the parent-child relationship, so that PD enforced it directly when creating a new diagram.
     Specify yours conditons in your extension attached to your model
     Example : When the user want create a child diagram : You can display a list of Parent Diagrams to select from.
     You can set in your extension by VBScript parent-child relationship
Question #4 In the EA Diagrams, we want to have f.e. four copies of City Planning diagram, each of them should have different elements available, f.e. in the first copy, only Architecture Areas shall be made available, in the second one Architecture Areas and Business Functions, in the third on f.e. only Business Functions shall be made available.
If I understand well your question. I suggest to take a look in
Repository=>Administration=>Objects Permission Profile
You can specify objects to show, mask, deactivate at model level.
You can specifiy your own metadata.
But I'm not sure you can mask, deactivate functions following diagram selection. It seem to specific.
Message was edited by: Benoit Le Nabec

How to create a Model based on an SQL Server?

Hello,
Can someone please guide me how can I create a Model which takes it's Data from a table in an SQL Server?
Can I make such a Model that will connect directly to a Datasource on the Application Server?

Well Roy,
I was also facing some similar problem, just now got my service displayed in portal. Thanks a lot that you could solve it urself. Anyway, now for using this service from another portal component do the following
1. Add SharingReference value in Deployment Descriptor of the portal app from where u want to access this service
example:
<application-config>
<property name="SharingReference"      value="com.customer.training.MyFirstPortalApp">
</property>
</application-config>
2. Add libraries of the Portal Service (xxxapi.jar)
in your par file u can see one jar file as <servicename>api.jar . extract this to some other location and in the client portal app project add this .jar to its build path.
3. Write code to access the Portal Service
    a. Import package of the Portal Service
    b. Get instance of the Portal Service
    c. Call methods of the Portal Service
example:IPortalRuntimeResources runtimeResources =      PortalRuntime.getRuntimeResources();
IService aService = runtimeResources.getService("com.customer.training.MyFirstPortalApp.MyService");
// OR
IService aService = runtimeResources.getService(IMyService.KEY);
// Cast the Service
IMyService myService = (IMyService)aService;
// call methods of the service
response.write(myService.getWelcomeString(aName));
thats how it should be...
regards,
Shubhadip

Error when creating data model - Internal Server Error

When trying to create a new Data Model in BI Publisher (11.1.1), we are getting a “Internal Server Error” message and the page to create data models wont display. We are able to login to BIP with any user, but we cant do anything else… (seems due to a null pointer exception, as shown in this message):
+[ServletContext@605092857[app:bipublisher module:xmlpserver path:/xmlpserver spec-version:2.5 version:11.1.1]] Servlet failed with Exception+
java.lang.NullPointerException
We’ve examined bipublisher.log and we get several warnings:
Component: AdminServer
Module: oracle.xdo
Message: SawUtil.setUserHome - Unable to lookup user home: weblogic
Component: AdminServer
Module: oracle.xdo
Message: java.rmi.RemoteException: access denied for user to path /users/weblogic.; nested exception
Then, we get this errors in sawlog0.log:
Component: OBIPS
Module: saw.soap.catalogservice
+Message: Invalid path () --+
File:webcatalogsoaphandler.cpp
Line:877
Location:
saw.soap.catalogservice
saw.SOAP
saw.httpserver.request.soaprequest
saw.rpc.server.responder
saw.rpc.server
saw.rpc.server.handleConnection
saw.rpc.server.dispatch
saw.threadpool
saw.threads
AuthProps: AuthSchema=Impersonate-soap|IMPERSONATE=weblogic|NQ_SESSION.AUTHINITBLOCKSONLY=******|PWD=******|UID=BISystemUser|User=weblogic
ecid: e7cc62fc411b9afe:30699382:1389a0e0d36:-8000-000000000000257b,0:4
ThreadID: 4180
This same error repeats for files webcatalogsoaphandler.cpp and localwebcatalog.cpp.
Access to SOAP is explicity granted to BISystemUser (via Manage Privileges ) and we haven’t changed any security policies…
Any ideas why this is happening and how to solve it?
Thanks in advance.
Regards
Edited by: user8021127 on 19-jul-2012 1:12

Did you find a solution to this?

Pi71,Error while creating processcompoent model in folder

Hi Friends,
we are creating folders under modelling.once the folder is created we are trying to create Process component models under this folder.Its throwing an Access error.
" write access needed to complete this operation".Do we need to edit any role for this to work.
Regards
chandra dasari

Hi
check the below
1) what application profile have you selected (or set as default) while you log-in to ESR - Builder?
Try to use 'unsrestricted' mode & see if it works.
if other option was already set as default then, you can change that within ESR menu. follow link to change.
http://help.sap.com/saphelp_nwpi71/helpdata/en/46/8b081f8a9c01dde10000000a1553f7/content.htm
2) is there any authorisation restriction set on these objects??
check this
http://help.sap.com/saphelp_nwpi71/helpdata/en/45/18edbad26321a1e10000000a1553f6/frameset.htm
3) does any other user can perform this?? if so compare the UIDs & set necessary access/ roles to yours.
Regards
Vishnu

Unable to generate Logical Model Diagrams through Reverse Engineering

Hi,
I am currently using SQL Developer Data Modeler Version-3.0.04.
I have generated Logical Model Diagrams from Relational Model Diagrams through Reverse Engineering (Done by pressing an" engineer to Logical Model button" on top panel of sql developer) .I saved the DMD file (source file) once i had done generating the logical diagrams.Now if i reopen the DMD and open the logical diagram again I found that most of the tables had lost their relationships.So i tried to regenerate the Logical Model Diagram again from the same Relational Diagram but it is not being generated unless i create a new Relational Diagram.Is there a way to generate multiple Logical Diagrams for the same Relational Diagram rather than creating a new one for each Logical Diagram to be created.
Regards .
Thanks in advance.

Any comments on this issue?. Please let us know.

Error when creating a database diagram

Hi, this is the error that I receive when I try to create a database diagram with aprox. 20 tables:
BME-99003: An error occurred, so processing could not continue.
Cause:
The application has tried to de-reference an invalid pointer. This exception should have been dealt with programmatically. The current activity may fail and the system may have been left in an unstable state. The following is a stack trace.
java.lang.NullPointerException
     at oracle.jdeveloper.dbmodeler.diagram.shape.DBBaseShape.notifyChange(DBBaseShape.java:226)
     at oracle.bm.diagrammer.shape.BaseDiagramShape.initShape(BaseDiagramShape.java:367)
     at oracle.bm.diagrammer.shape.BaseDiagramNode.initShape(BaseDiagramNode.java:291)
     at oracle.bm.diagrammer.BaseDiagram.addShape(BaseDiagram.java:6921)
     at oracle.bm.diagrammer.BaseDiagram.addShape(BaseDiagram.java:6846)
     at oracle.bm.diagrammer.BaseDiagram$1ShapeCreator$1.performAction(BaseDiagram.java:5494)
     at oracle.bm.diagrammer.DistributableLockMonitor.performLockedAction(DistributableLockMonitor.java:70)
     at oracle.bm.diagrammer.BaseDiagram.performDiagramResizeLockedAction(BaseDiagram.java:2521)
     at oracle.bm.diagrammer.BaseDiagram$1ShapeCreator.doIt(BaseDiagram.java:5471)
     at oracle.bm.diagrammer.BaseDiagram.createShapesFromInfo(BaseDiagram.java:5729)
     at oracle.bm.diagrammer.registry.RCompositeDiagram.dropList(RCompositeDiagram.java:1258)
     at oracle.bm.addinUtil.IDEAppContext$4$2$2.run(IDEAppContext.java:4643)
     at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:199)
     at oracle.ide.controls.progress.AbstractProgressDialog.dispatchThisEvent(AbstractProgressDialog.java:463)
     at oracle.ide.controls.progress.AbstractProgressDialog.showDialog(AbstractProgressDialog.java:318)
     at oracle.bm.addinUtil.IDEAppContext$4$1.performAction(IDEAppContext.java:4735)
     at oracle.bm.diagrammer.DistributableLockMonitor.performLockedAction(DistributableLockMonitor.java:70)
     at oracle.bm.diagrammer.BaseDiagram.performDiagramResizeLockedAction(BaseDiagram.java:2521)
     at oracle.bm.addinUtil.IDEAppContext$4.performAction(IDEAppContext.java:4730)
     at oracle.bm.diagrammer.LockMonitor.performLockedAction(LockMonitor.java:64)
     at oracle.bm.diagrammer.BaseDiagram.performDiagramLockedAction(BaseDiagram.java:2437)
     at oracle.bm.addinUtil.IDEAppContext.dropNavigatorNodeLater(IDEAppContext.java:4395)
     at oracle.bm.addinUtil.IDEAppContext$5.run(IDEAppContext.java:4374)
     at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:461)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
funny thing is that it worked with bigger diagrams but for some reason when I select these tables it crashes.

Don't know the cause, but my advice would be to try and create the diagram in small steps.
In similar situations I always found that a problem like this occurred when adding some specific table or other component and when investigating found out that there was a problem with that specific component. So it would be interesting to know when this error exactly occurs and review the corresponding component.
Jan Kettenis

Create a Model

Good Day All,
when I tried to create a model in SAP Netweaver Studio and I got the following error message:
An internal error has ocurred, see error log for more details.
Plugin name: Web Dynpro Model Editor
Plugin ID: com.sap.ide.webdynpro.modeleditor
class: com.sap.ide.webdynpro.modeleditor.ModelEditorCallback
Method: createModel
Message: An error ocurred, see error log for more details.
Exception: java.lang.NullPointerException: null
anyone have any idea what cause that error message?
thanks,

Hi Rami,
It looks like this NPE is coming from the Web Dynpro model plug-in code.
If 'Create Model' was working earlier, then this might be due to metadata corruption. Close the NWDS.
1) Either delete the contents of the metadata folder of your workspace & restart NWDS.
2) Or you can restart NWDS in a fresh workspace.
Please verify that you are providing all the required parameters in the model creation wizard.
If the NWDS installation has gone fine & still the problem persists, this seems to be a bug & you can raise a customer ticket (CSS message on Web Dynpro component)
Kind Regards,
Nitin
PS: If you are using quite old version of NWDS, I would advise you to upgrade to a later version as these very basic things should be working fine.
Edited by: Nitin Jain on Apr 5, 2009 6:55 PM

How to Create Data Model

I have a database of 1000 tables. How can I create ER-Model for that database. I mean figure showing fields and relationships. I am looking for a smart way.
Regards,
Amer

You could try using Oracle Designer to create your diagrams. Also, it may make sense if you group the tables by functional areas
The Techical Reference Manual for the Oracle 11i HRMS application is good example of this, since the table relationships are shown by functional area (i.e. Person data, Job data, etc.).

Integration Scenarios vs Process Component Modelling

Hi Experts,
Just wanted to know:
1) How theoritically and technically, is 7.0's Integration Scenarios different from 7.1's Process modelling?
2) For what kind of cases we go for Integartion Scenarios and for what kind of cases we model a PCM?
3) What is "Deployment Unit" in PCM?
Thanks
Shailesh

Hi,
>>>1) How theoritically and technically, is 7.0's Integration Scenarios different from 7.1's Process modelling?
Process Component modeling is ment for modeling SOA, where you create a Business Object, Service Interfaces, etc and this help to understand the business semantics of enterprise services in the business process platform. And you will not create Receiver Determination, Interfaces Determination out if that. Where as Integration Scenario is meant only for integration where you define Sender system, receiver system etc...
>>>2) For what kind of cases we go for Integartion Scenarios and for what kind of cases we model a PCM?For normal integration between 2 or more systems you use Integration Scenario. But Process Component Model is for Service Provisioning.
>>>3) What is "Deployment Unit" in PCM?
All the related/dependent Process Components are tied together in one unti and this is called Deployment unit. It also describes the logical boundary of the Process Component. Apart from this deployment units are the only installable units and this shows what types of interactions are needed between process components.
Thanks,
Prakash

Sever Model Diagram vs ER Diagram

Hi,
what is the difference between Sever Model Diagram and ER Diagram?
This is my problem: when I modify a given table in the design editor (or capture it using reverse engineering), neither the enity nor the ER diagram are updated. So, I have to delete the entity, and create it again. Then, the ER deletes automatically the entity, and I have to include the entity again, and reorganize it.
In order not to do this every time, I've thought about using the Sever Model Diagram (that updates automatically) instead of the ER diagrams. Is it possible, I mean, do I lose any functionality? what is the difference between them?
Thanks.

There are three possible approaches, one of which is the one you suggest - keep everything in SMD and don't bother to maintain the ERs, at least not until the next major redesign effort. This is easy, and for the most part works very well. A lot of the best Designer users I know do it that way. The only major downside that I see is that foreign keys are not quite the same things as relationships, and a good name for an FK is not necessarily a good name for a relationship. But I only use relationship names when I am reading an ER diagram to a user to validate my design. For a system in maintenance mode, we aren't going to make major design changes, so we aren't going to validate the design.
Approach two is to try to keep the SMD and ERD in sync by replicating changes in the SMD up to the ERD using the Table/Entity retrofit. As you already know, this is very tedious, and doesn't even work very well. Even the relationship naming problem isn't solved, because the Table/Entity retrofit uses the FK names to name the relationships. I definitely would NOT do it this way.
Finally, you could do all your database changes in the Entity level and percolate them down to the Table level with the Database Design Transformer (DDT). This actually works fairly well, and I've used this method for a few projects. The only problem is that DDT doesn't always change the table definitions the way you expect it to do it, so sometimes you have to clean up after it. Fortunately, you can preview what it proposes to do before it does it, and there are some preference settings you can use to control it.
Still - if you don't really NEED the Entity view of things, it is much simpler to leave everything in Table definitions and the Server Model diagram and not bother to keep Entities and Relationships up to date. When it is time for a major re-design THEN you delete all your logical models, run the retrofit, and start from there.

J2EE design patterns vs SAP component model

Hello,
does anyone have documentation or articles which makes a link between the J2EE design patterns and the SAP component model ?
Thanks

Hi Thierry,
> What do you mean by assembling DC's into another DC ? Do you mean by using child DC's? Also , the J2EE server DC will have to be in a SC.
If you create "Java" DC that DC will not have a deployable result on its own. Typically you create a public part with purpose "compilation" (API) and a public part with purpose "assembly". If you define a dependency from an EAR DC or a J2EE Library DC to that assembly public part then the Jar file contained in that public part will be assembled into your (deployable) .ear file or the J2EE library.
Child DCs are just a means of limiting visibility/scope, similar to ACLs.
As long as you are working with a "track" each and every DC will be part of an SC. You define a track, you add "developed" SCs, you get a "compartment" where you can create DCs. So each DC automatically belongs to an SC. (But not all DC types produce deployable results, EJB Module/Web Module also need to be assembled into an EAR).
> is it typical to have an SC dedicated to utility classes?
Depends on the size of the project/product. I'd start by putting utility classes into some utility package (pure Java). If that gets too large I'd put utility classes sorted by functionality into DCs (Java libraries = jars). If that gets too large its time to think about utility SCs. Otherwise the tradeoff between meta-information and real content might be too much. As the project/product grows the need for refactoring may arise...
Regards,
Marc

Create Wire Model in webdynpro FPM.

Hi Friends,
Please , Help Me How to create Wire Model by Webdynpro FPM. Please Give me Step by Step process.
i have done Form, list, search and Tree but i am not geting how to do Wire Model. So Please Give me Step by step Review to create Wire Model with FPM.
it's Urgent.
Thanks.
Pappu Mehta
Edited by: Pappu Kumar Mehta on Nov 18, 2011 3:38 AM

Wire Model
The wire model can be used to create running FPM application by pure configuration or at least with minimal coding effort. The runtime interdependencies between UIBBs are defined by configuration entities called “wires” which are based on reusable “connector” classes implementing the dependency semantics. The primary use cases for the wire model are object models with generic access interfaces (for example, ESF, BOPF, or BOL).
A wire controls the runtime interdependencies between two UIBBs; that is, they determine the data content of the target UIBB depending on user interaction changing the “outport” of the source UIBB. Outports can be of type lead selection, selection or collection. For example, the execution of a search on a Search GUIBB will change its collection outport and may therefore change the data content of a result list displayed in a separate List GUIBB. Similarly, changing the lead selection in a list of sales orders may change the data content of another list displaying the associated sales order items.
In order to be part of a wire model, a UIBB needs to implement a certain Web Dynpro interface which in turn provides a feeder model implementation. The FPM GUIBBs are automatically integrated if their feeder classes implement the feeder model interface.
Application areas or object models define their own namespaces for which their connector classes, feeder model classes can be reused. Moreover, they typically need to provide a transaction handler class which manages transaction events like save, modify or check and global message handling.
Wires are defined on the level of the floorplan configuration. For each model UIBB contained in the floorplan configuration, a source UIBB with specified outport can be defined. Furthermore, a connector class and, potentially, connector parameters must be maintained.
If the floorplan contains composite components (tabbed components), the model UIBBs contained in the tabbed components can also be wired. However, in order to provide better reusability of composite components, it is also possible to define intrinsic wiring for tabbed components. A tabbed component can define a model UIBB as a “wire plug” (this is usually a master UIBB), which serves as an entry point for the wiring of the tabbed component from the enveloping floorplan component. If a wire plug is configured for a tabbed UIBB, only the wire plug UIBB can be wired from outside.
Transaction Handler class
    The transaction interface provides methods for handling global and transactional events. In the FPM configuration editor, one transaction handler implementation can be assigned on the level of the wire model. However, it is not mandatory to specify. But it can be used for wring some specific logic for Application level events.
Interface “IF_FPM_WIRE_MODEL_TRANSACTION” is implemented for creating transaction handle class.
Method
Method description
START
It is called at the starting of FPM application. It provides 3 things “FPM Massage manger instance”, “Property bag of FPM Application”, and “Runtime information of FPM”. Here, we can also specify application commit capability.
AFTER_FLUSH
This method is called after FLUSH has been called for all current UIBBs. It can be used to flush buffers.
AFTER_PROCESS_EVENT
This method is called after PROCESS_EVENT has been called for all current UIBBs. It can be used for handling transactional events for example SAVE or CHECK. Moreover, it can be used to collect messages which here not handled inside UIBBs and to forward them to the FPM message handler.
AFTER_PROCESS_BEFORE_OUTPUT
This method is called after PBO has been called for all current UIBBs. It can be used to collect messages at the latest possible point in time before screen output.
AFTER_NEEDS_CONFIRMATION
This method is called after NEEDS_CONFIRMATION has been called for all UIBBs. It can be used to analyze and add confirmation requests.
IS_DIRTY
This method can be used to indicate a dirty state for the work protection mode.
Connector Class
    The “IF_FPM_CONNECTOR” connector interface comprises an interface, “IF_FPM_CONNECTOR_DEF”, defining the access by the FPM framework and an interface “IF_FPM_CONNECTOR_RUN” for runtime access by the application feeder model.
The definition interface possesses a static attribute, “SV_NAMESPACE”, which should be filled with the namespace (ex. ‘FPM_DEMO’ or ‘BOL’ or user specific) in the class constructor of a connector implementation (for example in a common superclass).
Method for “IF_FPM_CONNECTOR_DEF”
    Method
Method description
GET_PARAMETER_LIST
Connector classes can be parameterized to flexibly control their runtime behavior. The parameter values are maintained for the wires in the FPM configuration editor. A parameter is defined by a name, its data type and a descriptive text.
INITIALIZE
With this method the connector is initialized with the parameter values. This method is called by the FPM runtime upon UIBB instantiation.
GET_PARAMETER_VALUE_SET
With this method, a connector implementation can provide a value set for each parameter. For example, in an object model a parameter may carry the association name. For a wire between specified UIBBs, the method may provide a list of all associations between the source and target business object node.
SET_INPUT
Receives an object reference carrying the actual data of the connected outport. This method is called before the UIBB‟s PBO by the FPM runtime.
Method for “IF_FPM_CONNECTOR_RUN”
    Method
Method description
GET_OUTPUT
Returns an object reference carrying the actual data to be displayed by a UIBB. This method can be called by the UIBB at PBO for example in the GET_DATA method of a feeder class.
IS_CREATE_ALLOWED
Returns a Boolean indicator whether entity creation is allowed. This method can be called by the UIBB at PBO to dynamically control the activation of create buttons for example to maintain the action usage parameter in the GET_DATA method of a feeder class.
CREATE_ENTITY
Creates and returns a data entity which can be arbitrarily typed. This method can be called by an action handler of the UIBB for example in the PROCESS_EVENT method of a feeder class.
There are total seven methods in connector interface “IF_FPM_CONNECTOR” that should be implemented in connector class. We should also create class constructor for setting “Namespace”. “SET_OUTPUT” and “GET_OUTPUT” is bridge between FPM components, so these methods should be implemented properly.
Wire for Free UIBBs
    Wire model is implemented on Web Dynpro component by implementing “IF_FPM_UIBB_MODEL” Web Dynpro interface. It contains only one method “GET_MODEL_API” which is used to set “FPM Feeder Model” for Free GUIBBs. It contains only one parameter “RO_FEEDER_MODEL”. So, we have to create a FPM Feeder Model class and assign to that parameter.
    FPM Feeder Model Class – Interface “IF_FPM_FEEDER_MODEL” is implemented for creating Feeder Model Class.
    Method for “IF_FPM_ FEEDER_MODEL”
    Method
Method description
GET_NAMESPACE
Returns the namespace of the underlying application area. Method is called at design time.
SET_CONNECTOR
Called upon instantiation of a UIBB. It hands over the connector (reference to IF_FPM_CONNECTOR_RUN) which can be accessed for data retrieval at PBO.
GET_INPORT_KEY
Returns a reference to an object key which characterizes the meta data type expected at the import (for example the business object node). Method is called at design time.
GET_OUTPORTS
Provides a table of outports comprising the object key, the port type an identifier and a descriptive text. Method is called at design time.
GET_OUTPORT_DATA
Returns an object reference carrying the actual data identifier for a certain port. Method is called at runtime.
        Assistance class can also be used as Feeder Model Class and reference “WD_ASSIT” can used as Feeder model instance.
Ex:    METHOD get_model_api .
ro_feeder_model = wd_assist.
ENDMETHOD.
Wire for GUIBBs
    Nothing special we need to do that. Interface “IF_FPM_FEEDER_MODEL” is also implemented on feeder class for getting port support. We need to set port manually using structure “IF_FPM_FEEDER_MODEL=>CS_PORT_TYPE”. It contains three constants “COLLECTION”, “SELECTION” and “LEAD_SELECTION”. It should be properly configured.
Source Codes:
Code for Transaction handler class:
class ZCL_MY_TRAN_HANDLER definition
public
create public .
public section.
*"* public components of class ZCL_MY_TRAN_HANDLER
*"* do not include other source files here!!!
interfaces IF_FPM_WIRE_MODEL_TRANSACTION .
protected section.
*"* protected components of class ZCL_MY_TRAN_HANDLER
*"* do not include other source files here!!!
private section.
*"* private components of class ZCL_MY_TRAN_HANDLER
*"* do not include other source files here!!!
data MO_MSG_MAN type ref to IF_FPM_MESSAGE_MANAGER .
ENDCLASS.
CLASS ZCL_MY_TRAN_HANDLER IMPLEMENTATION.
* <SIGNATURE>---------------------------------------------------------------------------------------+
* | Instance Public Method ZCL_MY_TRAN_HANDLER->IF_FPM_WIRE_MODEL_TRANSACTION~AFTER_FLUSH
* +-------------------------------------------------------------------------------------------------+
* +--------------------------------------------------------------------------------------</SIGNATURE>
method IF_FPM_WIRE_MODEL_TRANSACTION~AFTER_FLUSH.
return.
endmethod.
* <SIGNATURE>---------------------------------------------------------------------------------------+
* | Instance Public Method ZCL_MY_TRAN_HANDLER->IF_FPM_WIRE_MODEL_TRANSACTION~AFTER_NEEDS_CONFIRMATION
* +-------------------------------------------------------------------------------------------------+
* | [--->] IO_EVENT                       TYPE REF TO CL_FPM_EVENT
* | [--->] IT_UIBBS                       TYPE        FPM_T_UIBB_COMPONENTS
* | [<-->] CT_CONFIRMATION_REQUESTS       TYPE        FPM_T_CONFIRMATION_REQUESTS
* +--------------------------------------------------------------------------------------</SIGNATURE>
METHOD if_fpm_wire_model_transaction~after_needs_confirmation.
*----- which event
CASE io_event->mv_event_id.
*----- start over
    WHEN if_fpm_constants=>gc_event-start_over.
*----- raise confirmation request if state is dirty
      CHECK if_fpm_wire_model_transaction~is_dirty( ) = abap_true.
      APPEND cl_fpm_confirmation_request=>go_data_loss TO ct_confirmation_requests.
ENDCASE.
ENDMETHOD.
* <SIGNATURE>---------------------------------------------------------------------------------------+
* | Instance Public Method ZCL_MY_TRAN_HANDLER->IF_FPM_WIRE_MODEL_TRANSACTION~AFTER_PROCESS_BEFORE_OUTPUT
* +-------------------------------------------------------------------------------------------------+
* +--------------------------------------------------------------------------------------</SIGNATURE>
method IF_FPM_WIRE_MODEL_TRANSACTION~AFTER_PROCESS_BEFORE_OUTPUT.
RETURN.
endmethod.
* <SIGNATURE>---------------------------------------------------------------------------------------+
* | Instance Public Method ZCL_MY_TRAN_HANDLER->IF_FPM_WIRE_MODEL_TRANSACTION~AFTER_PROCESS_EVENT
* +-------------------------------------------------------------------------------------------------+
* | [--->] IO_EVENT                       TYPE REF TO CL_FPM_EVENT
* | [<-()] RV_RESULT                      TYPE        FPM_EVENT_RESULT
* +--------------------------------------------------------------------------------------</SIGNATURE>
method IF_FPM_WIRE_MODEL_TRANSACTION~AFTER_PROCESS_EVENT.
CASE io_event->mv_event_id.
    WHEN ''.
    WHEN ''.
    WHEN OTHERS.
ENDCASE.
endmethod.
* <SIGNATURE>---------------------------------------------------------------------------------------+
* | Instance Public Method ZCL_MY_TRAN_HANDLER->IF_FPM_WIRE_MODEL_TRANSACTION~IS_DIRTY
* +-------------------------------------------------------------------------------------------------+
* | [<-()] RV_IS_DIRTY                    TYPE        BOOLE_D
* +--------------------------------------------------------------------------------------</SIGNATURE>
METHOD if_fpm_wire_model_transaction~is_dirty.
rv_is_dirty = cl_fpm_wire_model_col_factory=>work_protection_is_dirty( )

Issue while creating Data Model in BI Publisher and logging into xmlpserver

Hi All,
We are facing an issue in OBIEE 11.1.1.5.
If we are logging with Non Admin Id (other than weblogic) and select New Data Model, a blank screen is coming. Where as, if we use Admin Id, we are getting screen as usual for creating data model. There were some blogs mentioning to change Priviledges for SOAP access, but that approach is also not working.
Further, we are also not able to open xmlpserver with Non Admin Id.
Any help or pointers would be great.
Regards,

how about pasting the content of your data template here, so that forum members can see what could be the problem.

Creating component model diagram

Similar Messages

Maybe you are looking for