Creating Crawler impact rule through Powershell

Hi All,
I want to create a "Crawler Impact rule" for one web application, I found below script but its not working or it may be not the full script. As i am new in Powershell script writing, please help me writing the full PS script or please suggest any
other script which can create a "Crawler Impact Rule". Thank Yoyu
New-SPEnterpriseSearchSiteHitRule -Name $DefaultWebApplicationName -Behavior 'SimultaneousRequests' -HitRate 64

Hi Aditya,
According to your description, my understanding is that you want to create a crawler impact rule via PowerShell.
For the New-SPEnterpriseSearchSiteHitRule, there is not the Name parameter. So, please make sure the cmdlet is correct.
More information about the New-SPEnterpriseSearchSiteHitRule, you can refer to the link:
http://technet.microsoft.com/en-us/library/ff608048(v=office.14).aspx
Best Regards,
Wendy
Wendy Li
TechNet Community Support

Similar Messages

Creating new CRM ORG through powershell fails

Hello,
I am able to create a new org through deployment manager without any problem.
But I am run the following power command on the very same box
New-CrmOrganization -DisplayName TestAutomated -SqlServerName DEVCRM2013SQL.dev.compnay.ca\CRM2013DEV -SrsUrl URL_SPECIFIED
I get the following message and it looks like there are 3 errors
==DeploymentServiceFault Info==========================================================================================
Error    : The Deployment Service cannot process the request because one or more validation checks failed.
Time    : 1/30/2015 8:11:56 PM
ErrorCode    : -2147167645
Date    : 3:11:56 PM
Time    : 1/30/2015
Error Items:
    ActiveDirectoryRightsCheck raising error : The current user does not have required permissions (read/write) for
the following Active Directory group: CN=ReportingGroup
{93af2193-b321-426d-b51c-7b68014f092c},OU=CRM,DC=dev,DC=compnay,DC=ca
    SqlServerAgentCheck raising error : SqlAgent$CRM2013DEV (SqlAgent$CRM2013DEV) service is not running on the server
DEVCRM2013SQL.dev.compnay.ca.
    ExistingRSCheck raising error : Setup failed to validate specified Reporting Services Report Server URL_SPECIFIED. Error: Error occurred while finding an item on the report server.
The permissions granted to user 'DEV\crmdevsvc' are insufficient for performing this operation. --->
Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException: The permissions granted to user
'DEV\crmdevsvc' are insufficient for performing this operation.
The same input is being used in Deployment manager. And I have confirmed that the SQL Agent service is running.
Could someone kindly help.
Thanks,
Hasib

Hello Zack,
The problem may be due to following causes:
1. The structure of the organization is missing in the CRM system.
2. The CRM organizational unit is not assigned to the R/3 organizational unit.
3. The division is not active in the CRM system, however, the R/3 substitute division is not maintained.
4. The program buffer in the CRM system is outdated.
So what you could do was the following -
1. You can use Transaction PPOMA_CRM to check the structure of your organization.To create the structure, read the documentation in the IMG ('Customer Relationship Management -> Master Data -> Organizational Management -> Organizational plan'). As of CRM Release 2.0C, you can generate the data from the R/3 system automatically. For this, use Transaction CRMC_R3_ORG_GENERATE.
2.In Transaction PPOM_CRM, each R/3 organizational unit has to be assigned to a CRM organizational unit.This assignment occurs in Transaction PPOMA_CRM.You find the corresponding fields in the 'Type' tab. You can maintain distribution channel and division on the 'Attributes' tab.
3. If you do not want to use a division in the CRM system, you have to make the corresponding Customizing in the IMG ('Customer Relationship Management -> Master Data -> Organizational Management').
4. The organizational structure is buffered to increase the performance.Up to CRM Release 2.0B, this buffer is only updated once every day.
If you change the organizational structure and transfer the master data based on the changes from the R/3 system on the same day, error messages may occur. Run the attached report ZCRM_ORGMAN_VTAREA_GET to resetup the buffer.
Hope this helps.
Thanks
Sumit

Multiple "FromAddressContainsWords" Conditions in One Rule via PowerShell?

My organization recently moved to Exchange Online and I am looking at trying to convert the old mail rules from our old system (Sieve rules from Zimbra) to something that will work in Exchange Online. My plan is to massage the Sieve output into New-InboxRule
statements. The massaging part is the easy part. What I'm having difficult with is using PowerShell to recreate a rule that should have multiple -FromAddressContainsWords parameters. Here's what I started off with:
New-InboxRule -Name "Annoyances" -FromAddressContainsWords roxioemail.com -FromAddressContainsWords "Covalent Technologies" -FromAddressContainsWords process.con -FromAddressContainsWords [email protected] -DeleteMessage $true -StopProcessingRules -Mailbox George.Lenzer
This didn't work as the -FromAddressContainsWords option can only be used once. The error also suggested trying to do an array if the parameter would accept one. I don't know, because that isn't documented anywhere. The only thing mentioned
in the help is that it will take a "MultivaluedProperty" which I assume means some sort of string or array that has multiple values in it.
I then tried this:
New-InboxRule -Name "Junk Mail" -FromAddressContainsWords {roxioemail.com; Covalent Technologies; process.com; [email protected]} -DeleteMessage $true -StopProcessingRules $true -Mailbox George.Lenzer
While this worked, when I went into OWA to look at the rule and check the list of words, instead of each word on it's own line, had a single entry containing everything between { and }. This doesn't look right, and I don't expect it would do what I
want. So how does one go about creating an Inbox rule from PowerShell that needs to check multiple conditions, some of the identical type? It can be done from the GUI, so there must be a way to do it from PowerShell. Any suggestions?

Hi George. Thanks for posting in the forums. Looking at both of your code snippets, I can see where the problem is. MultivaluedProperties in PowerShell are exactly as you describe: a set of properties presented as a single argument to a
parameter. The mistake you made was attempting to use the semicolon to separate the items in your multivalued property and then trying to present them as a single string. This is why you get the whole blob of text between the squiggly braces.
Before I give you the solution, let me say that what you want is to pass an array to -FromAddressContainsWords. In PowerShell. the comma along with multiple quoted strings is what defines an array. See here for a better explanation than I can
give:
http://theessentialexchange.com/blogs/michael/archive/2008/02/08/Multivalued-Parameters-.aspx
With that said, here's the solution to your issue:
New-InboxRule -Name "Junk Mail" -FromAddressContainsWords ("roxioemail.com", "Covalent Technologies", "process.com", "[email protected]") -DeleteMessage $true -StopProcessingRules
$true -Mailbox George.Lenzer
Hope this helps!

Creating an Advertisement Through Powershell SCCM 2012

Currently I'm trying to find the most efficient way to automate the package deployment process using powershell. The script I'm using at the moment is returning Message ID 100035(waiting for content) under the deployment status, and the CAS logs say
<![LOG[Requesting content SKG00054.1, size(KB) 1344, under context System with priority Low]LOG]!><time="11:18:46.382+240"
date="07-06-2012" component="ContentAccess" context="" type="1" thread="2780" file="contentaccessservice.cpp:855">
<![LOG[Submitted CTM job {1CA3F8E4-13DA-1483-9F8E-12FUL5C4E3FE}
to download Content SKG00054.1 under context System]LOG]!><time="11:18:46.413+240" date="07-06-2012" component="ContentAccess"
context="" type="1" thread="2780" file="downloadmanager.cpp:554">
<![LOG[Successfully created download request {2CEK4BA5-FD7D-4529-A04D-95DXE98237566}
for content SKG00054.1]LOG]!><time="11:18:46.413+240" date="07-06-2012" component="ContentAccess" context=""
type="1" thread="2780" file="downloadcontentrequest.cpp:824">
<![LOG[Location update from CTM for content SSKG00054.1 and request {2CEK4BA5-FD7D-4529-A04D-95DXE98237566}]LOG]!><time="11:18:47.069+240"
date="07-06-2012" component="ContentAccess" context="" type="1" thread="2676" file="downloadcontentrequest.cpp:991">
<![LOG[Download request only, ignoring location update]LOG]!><time="11:18:47.069+240"
date="07-06-2012" component="ContentAccess" context="" type="1" thread="2676" file="downloadcontentrequest.cpp:1010">
Execmgr logs:
<![LOG[Execution Request for advert SKG200BB package SKG00054 program * state change from WaitingDependency to WaitingContent]LOG]!><time="11:18:46.601+240"
date="07-06-2012" component="execmgr" context="" type="1" thread="2676" file="executionrequest.cpp:503">
<![LOG[Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="SKG00054",ProgramID="*",
actionType 1l, value , user NULL, session 4294967295l, level 0l, verbosity 30l]LOG]!><time="11:18:46.601+240"
date="07-06-2012" component="execmgr" context="" type="1" thread="2676" file="event.cpp:410">
<![LOG[Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="SKG00054",ProgramID="*",
actionType 1l, value NULL, user NULL, session 4294967295l, level 0l, verbosity 30l]LOG]!><time="11:18:46.741+240"
date="07-06-2012" component="execmgr" context="" type="1" thread="3452" file="event.cpp:410">
I'm unsure why the advertisement isn't deploying properly, because the properties look identical to previous packages I've sent manually. One thing I may think be the issue is that I'm
adding the package to a Distribution Point Group which I know may disrupt deployments if a package has already previously been assigned to it I believe.
$sitename = "SKG"
Function create-PKGDeployment
$targetcoll = gwmi -ns "root\SMS\Site_$sitename" -class SMS_Collection | WHERE {$_.Name -eq 'Lab'}
$collID = $targetcoll.CollectionID
$collName = $targetcoll.Name
$PKG = gwmi -ns "root\SMS\Site_$sitename" -class SMS_Package | WHERE {$_.name -eq 'Firefox'}
$PKGID = $PKG.PackageID
$PKGName = $PKG.Name
$AdvName = $PKGName+"_"+$PKGID+"_"+$collName
[ARRAY]$PackageID = $PKGID;
Invoke-WmiMethod -Namespace "Root\SMS\Site_SKG" -Name AddPackages -Path "SMS_DistributionPointGroup.GroupID='{1PKU8557-9153-4C39-8DHK-DB0C53H801BA}'" `
-ArgumentList ( ,$PackageID)
$Format = get-date -format yyyyMMddHHmmss
$Date = $Format + ".000000+***"
$AdvArgs = @{
AdvertisementName = "$AdvName";
CollectionID = $collID;
PackageID = $PKGID;
SourceSite = $sitename;
ActionInProgress = 2
PresentTime = $Date
ExpirationTime = $Date
PresentTimeEnabled = $true
ProgramName = "*";
AdvertFlags = 33751072;
RemoteClientFlags = 2128;
TimeFLags = 8193
Set-WmiInstance -Class SMS_Advertisement -arguments $AdvArgs -namespace "root\SMS\Site_$sitename" | Out-Null
Create-PkgDeployment

I created advertisement. I am trying to use powershell script o change advertisement start time and mandatory time and expiry time. I am using sccm2012 r2 cu2. I can able to change advertisement start time and expiry but not mandatory through powershell
or vbscript. In our environment we have more than 50+ advertisement schedule by daily bases. Can you help me how to change mandatory assignemnent time using script or powershell
Example: Advert start time:08/08/2014 11:00AM
Expiry Time 08/09/2014 6:00AM
Mandatory time: 08/08/2014 09:00PM. If you need any more info let me know

How to Create Windows Firewall Predefined rules using Powershell

Windows Firewall Predefined rules using Powershell
Following commands are working some time however sometimes it's giving errors. Any help would be appreciated
WORKING ==> Set-NetFirewallRule -DisplayGroup "File and Printer Sharing" -Enabled True
Set-NetFirewallRule -DisplayGroup "File and Printer Sharing" -Enabled True -Direction Inbound
NOT WORKING
PS C:\Windows\system32> Set-NetFirewallRule -DisplayGroup "File and Printer Sharing" -Enabled True -Direction Outbound
Set-NetFirewallRule : One of the port keywords is invalid.
At line:1 char:1
+ Set-NetFirewallRule -DisplayGroup "File and Printer Sharing" -Enabled True -Dire ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidArgument: (MSFT_NetFirewal...ystemName = ""):root/standardcimv2/MSFT_NetFirewallRule) [Se
t-NetFirewallRule], CimException
+ FullyQualifiedErrorId : HRESULT 0x80070057,Set-NetFirewallRule
PS C:\Windows\system32> Set-NetFirewallRule -DisplayGroup "File and Printer Sharing" -Enabled True -Direction Outbound
Set-NetFirewallRule : One of the port keywords is invalid.
At line:1 char:1
+ Set-NetFirewallRule -DisplayGroup "File and Printer Sharing" -Enabled True -Dire ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidArgument: (MSFT_NetFirewal...ystemName = ""):root/standardcimv2/MSFT_NetFirewallRule) [Se
t-NetFirewallRule], CimException
+ FullyQualifiedErrorId : HRESULT 0x80070057,Set-NetFirewallRule
Anoop C Nair (My Blog www.AnoopCNair.com)
- Twitter @anoopmannur -
FaceBook Forum For SCCM

The command:
Get-NetFirewallRule -DisplayGroup "File and Printer Sharing" -Direction Outbound
produces the output:
Name : FPS-NB_Session-In-TCP
DisplayName : File and Printer Sharing (NB-Session-In)
Description : Inbound rule for File and Printer Sharing to allow NetBIOS Session Service connections. [TCP 139]
DisplayGroup : File and Printer Sharing
Group : @FirewallAPI.dll,-28502
Enabled : True
Profile : Any
Platform : {}
Direction : Outbound
Action : Allow
EdgeTraversalPolicy : Block
LooseSourceMapping : False
LocalOnlyMapping : False
Owner :
PrimaryStatus : OK
Status : The rule was parsed successfully from the store. (65536)
EnforcementStatus : NotApplicable
PolicyStoreSource : PersistentStore
PolicyStoreSourceType : Local
Name : FPS-NB_Session-Out-TCP
DisplayName : File and Printer Sharing (NB-Session-Out)
Description : Outbound rule for File and Printer Sharing to allow NetBIOS Session Service connections. [TCP 139]
DisplayGroup : File and Printer Sharing
Group : @FirewallAPI.dll,-28502
Enabled : True
Profile : Any
Platform : {}
Direction : Outbound
Action : Allow
EdgeTraversalPolicy : Block
LooseSourceMapping : False
LocalOnlyMapping : False
Owner :
PrimaryStatus : OK
Status : The rule was parsed successfully from the store. (65536)
EnforcementStatus : NotApplicable
PolicyStoreSource : PersistentStore
PolicyStoreSourceType : Local
Name : FPS-SMB-In-TCP
DisplayName : File and Printer Sharing (SMB-In)
Description : Inbound rule for File and Printer Sharing to allow Server Message Block transmission and reception via Named Pipes. [TCP 445]
DisplayGroup : File and Printer Sharing
Group : @FirewallAPI.dll,-28502
Enabled : True
Profile : Any
Platform : {}
Direction : Outbound
Action : Allow
EdgeTraversalPolicy : Block
LooseSourceMapping : False
LocalOnlyMapping : False
Owner :
PrimaryStatus : OK
Status : The rule was parsed successfully from the store. (65536)
EnforcementStatus : NotApplicable
PolicyStoreSource : PersistentStore
PolicyStoreSourceType : Local
Name : FPS-SMB-Out-TCP
DisplayName : File and Printer Sharing (SMB-Out)
Description : Outbound rule for File and Printer Sharing to allow Server Message Block transmission and reception via Named Pipes. [TCP 445]
DisplayGroup : File and Printer Sharing
Group : @FirewallAPI.dll,-28502
Enabled : True
Profile : Any
Platform : {}
Direction : Outbound
Action : Allow
EdgeTraversalPolicy : Block
LooseSourceMapping : False
LocalOnlyMapping : False
Owner :
PrimaryStatus : OK
Status : The rule was parsed successfully from the store. (65536)
EnforcementStatus : NotApplicable
PolicyStoreSource : PersistentStore
PolicyStoreSourceType : Local
Name : FPS-NB_Name-In-UDP
DisplayName : File and Printer Sharing (NB-Name-In)
Description : Inbound rule for File and Printer Sharing to allow NetBIOS Name Resolution. [UDP 137]
DisplayGroup : File and Printer Sharing
Group : @FirewallAPI.dll,-28502
Enabled : True
Profile : Any
Platform : {}
Direction : Outbound
Action : Allow
EdgeTraversalPolicy : Block
LooseSourceMapping : False
LocalOnlyMapping : False
Owner :
PrimaryStatus : OK
Status : The rule was parsed successfully from the store. (65536)
EnforcementStatus : NotApplicable
PolicyStoreSource : PersistentStore
PolicyStoreSourceType : Local
Name : FPS-NB_Name-Out-UDP
DisplayName : File and Printer Sharing (NB-Name-Out)
Description : Outbound rule for File and Printer Sharing to allow NetBIOS Name Resolution. [UDP 137]
DisplayGroup : File and Printer Sharing
Group : @FirewallAPI.dll,-28502
Enabled : True
Profile : Any
Platform : {}
Direction : Outbound
Action : Allow
EdgeTraversalPolicy : Block
LooseSourceMapping : False
LocalOnlyMapping : False
Owner :
PrimaryStatus : OK
Status : The rule was parsed successfully from the store. (65536)
EnforcementStatus : NotApplicable
PolicyStoreSource : PersistentStore
PolicyStoreSourceType : Local
Name : FPS-NB_Datagram-In-UDP
DisplayName : File and Printer Sharing (NB-Datagram-In)
Description : Inbound rule for File and Printer Sharing to allow NetBIOS Datagram transmission and reception. [UDP 138]
DisplayGroup : File and Printer Sharing
Group : @FirewallAPI.dll,-28502
Enabled : True
Profile : Any
Platform : {}
Direction : Outbound
Action : Allow
EdgeTraversalPolicy : Block
LooseSourceMapping : False
LocalOnlyMapping : False
Owner :
PrimaryStatus : OK
Status : The rule was parsed successfully from the store. (65536)
EnforcementStatus : NotApplicable
PolicyStoreSource : PersistentStore
PolicyStoreSourceType : Local
Name : FPS-NB_Datagram-Out-UDP
DisplayName : File and Printer Sharing (NB-Datagram-Out)
Description : Outbound rule for File and Printer Sharing to allow NetBIOS Datagram transmission and reception. [UDP 138]
DisplayGroup : File and Printer Sharing
Group : @FirewallAPI.dll,-28502
Enabled : True
Profile : Any
Platform : {}
Direction : Outbound
Action : Allow
EdgeTraversalPolicy : Block
LooseSourceMapping : False
LocalOnlyMapping : False
Owner :
PrimaryStatus : OK
Status : The rule was parsed successfully from the store. (65536)
EnforcementStatus : NotApplicable
PolicyStoreSource : PersistentStore
PolicyStoreSourceType : Local
Name : FPS-ICMP4-ERQ-In
DisplayName : File and Printer Sharing (Echo Request - ICMPv4-In)
Description : Echo Request messages are sent as ping requests to other nodes.
DisplayGroup : File and Printer Sharing
Group : @FirewallAPI.dll,-28502
Enabled : True
Profile : Any
Platform : {}
Direction : Outbound
Action : Allow
EdgeTraversalPolicy : Block
LooseSourceMapping : False
LocalOnlyMapping : False
Owner :
PrimaryStatus : OK
Status : The rule was parsed successfully from the store. (65536)
EnforcementStatus : NotApplicable
PolicyStoreSource : PersistentStore
PolicyStoreSourceType : Local
Name : FPS-ICMP4-ERQ-Out
DisplayName : File and Printer Sharing (Echo Request - ICMPv4-Out)
Description : Echo Request messages are sent as ping requests to other nodes.
DisplayGroup : File and Printer Sharing
Group : @FirewallAPI.dll,-28502
Enabled : True
Profile : Any
Platform : {}
Direction : Outbound
Action : Allow
EdgeTraversalPolicy : Block
LooseSourceMapping : False
LocalOnlyMapping : False
Owner :
PrimaryStatus : OK
Status : The rule was parsed successfully from the store. (65536)
EnforcementStatus : NotApplicable
PolicyStoreSource : PersistentStore
PolicyStoreSourceType : Local
Name : FPS-ICMP6-ERQ-In
DisplayName : File and Printer Sharing (Echo Request - ICMPv6-In)
Description : Echo Request messages are sent as ping requests to other nodes.
DisplayGroup : File and Printer Sharing
Group : @FirewallAPI.dll,-28502
Enabled : True
Profile : Any
Platform : {}
Direction : Outbound
Action : Allow
EdgeTraversalPolicy : Block
LooseSourceMapping : False
LocalOnlyMapping : False
Owner :
PrimaryStatus : OK
Status : The rule was parsed successfully from the store. (65536)
EnforcementStatus : NotApplicable
PolicyStoreSource : PersistentStore
PolicyStoreSourceType : Local
Name : FPS-ICMP6-ERQ-Out
DisplayName : File and Printer Sharing (Echo Request - ICMPv6-Out)
Description : Echo Request messages are sent as ping requests to other nodes.
DisplayGroup : File and Printer Sharing
Group : @FirewallAPI.dll,-28502
Enabled : True
Profile : Any
Platform : {}
Direction : Outbound
Action : Allow
EdgeTraversalPolicy : Block
LooseSourceMapping : False
LocalOnlyMapping : False
Owner :
PrimaryStatus : OK
Status : The rule was parsed successfully from the store. (65536)
EnforcementStatus : NotApplicable
PolicyStoreSource : PersistentStore
PolicyStoreSourceType : Local
Name : FPS-LLMNR-In-UDP
DisplayName : File and Printer Sharing (LLMNR-UDP-In)
Description : Inbound rule for File and Printer Sharing to allow Link Local Multicast Name Resolution. [UDP 5355]
DisplayGroup : File and Printer Sharing
Group : @FirewallAPI.dll,-28502
Enabled : True
Profile : Any
Platform : {}
Direction : Outbound
Action : Allow
EdgeTraversalPolicy : Block
LooseSourceMapping : False
LocalOnlyMapping : False
Owner :
PrimaryStatus : OK
Status : The rule was parsed successfully from the store. (65536)
EnforcementStatus : NotApplicable
PolicyStoreSource : PersistentStore
PolicyStoreSourceType : Local
Name : FPS-LLMNR-Out-UDP
DisplayName : File and Printer Sharing (LLMNR-UDP-Out)
Description : Outbound rule for File and Printer Sharing to allow Link Local Multicast Name Resolution. [UDP 5355]
DisplayGroup : File and Printer Sharing
Group : @FirewallAPI.dll,-28502
Enabled : True
Profile : Any
Platform : {}
Direction : Outbound
Action : Allow
EdgeTraversalPolicy : Block
LooseSourceMapping : False
LocalOnlyMapping : False
Owner :
PrimaryStatus : OK
Status : The rule was parsed successfully from the store. (65536)
EnforcementStatus : NotApplicable
PolicyStoreSource : PersistentStore
PolicyStoreSourceType : Local
The command:
(Get-NetFirewallRule -DisplayGroup "File and Printer Sharing" -Direction Outbound).DisplayName
shows the display names of the 14 outbound rules in the FPS group:
File and Printer Sharing (NB-Session-In)
File and Printer Sharing (NB-Session-Out)
File and Printer Sharing (SMB-In)
File and Printer Sharing (SMB-Out)
File and Printer Sharing (NB-Name-In)
File and Printer Sharing (NB-Name-Out)
File and Printer Sharing (NB-Datagram-In)
File and Printer Sharing (NB-Datagram-Out)
File and Printer Sharing (Echo Request - ICMPv4-In)
File and Printer Sharing (Echo Request - ICMPv4-Out)
File and Printer Sharing (Echo Request - ICMPv6-In)
File and Printer Sharing (Echo Request - ICMPv6-Out)
File and Printer Sharing (LLMNR-UDP-In)
File and Printer Sharing (LLMNR-UDP-Out)
If your output is different than this, it means rules have been removed (or added) to the File and Print Sharing group.
For example, if you run the command:
New-NetFirewallRule -DisplayName "My test rule 2" -group "File and Printer Sharing" -Enabled True -Protocol tcp -LocalPort 12346 -Direction Inbound
This adds a new inbound firewall rule to the FPS group. Output looks like:
Name : {06449724-944b-4048-834f-8870b9dce4f6}
DisplayName : My test rule 2
Description :
DisplayGroup : File and Printer Sharing
Group : File and Printer Sharing
Enabled : True
Profile : Any
Platform : {}
Direction : Inbound
Action : Allow
EdgeTraversalPolicy : Block
LooseSourceMapping : False
LocalOnlyMapping : False
Owner :
PrimaryStatus : OK
Status : The rule was parsed successfully from the store. (65536)
EnforcementStatus : NotApplicable
PolicyStoreSource : PersistentStore
PolicyStoreSourceType : Local
This test rule is of course useless because there's no listener on TCP port 12346 on this particular machine..
The new rule can also be viewed in Windows Firewall with Advanced Security:
Now if you run the command:
(Get-NetFirewallRule -DisplayGroup "File and Printer Sharing" -Direction Inbound).DisplayName
the output will look like:
File and Printer Sharing (Spooler Service - RPC)
File and Printer Sharing (Spooler Service - RPC-EPMAP)
My test rule 2
Sam Boutros, Senior Consultant, Software Logic, KOP, PA http://superwidgets.wordpress.com (Please take a moment to Vote as Helpful and/or Mark as Answer, where applicable)

How to create a new rule in Windows Firewall to permit some specific IPs and block all other computers

Hello,
I have a Win7 PC. I want to block all incoming connections except 3 or 4 IPs. How can i do this?
I created a new rule to block all connections using this steps:
Inbound rules > New Rule > Custom > All Programs > All Protocols / Ports > All Local/Remote IPs > Block the connectiion > All profiles > Then i gave a name
This rule works fine and blocks all incoming connections.
Then i want to create a new rule to allow specific IPs using this steps:
Inbound rules > New Rule > Custom > All Programs > All Protocols / Ports > Remote IPs: 192.168.10.5, 192.168.10.10 > Allow the connection > All profiles > Then i gave a name
But 192.168.10.5 and 192.168.10.10 couldn't reach W7 machine.
(If rules are disabled or FW is off; both IPs could reach W7 machine)
Thanks

Hi,
How did you check these two IP address? Through remote access? According to your description, it should only allow remote IP could access this computer. Please also allow local IP for test.
Roger Lu
TechNet Community Support

Creating a settlement Rule for an Asset: message error AA311

Hi All,
I have to create e Settlement Rule by KO02. But SAP gives me the message AA311 and doesn't allow me to go on...
Could anyone help me?
Thanks

hello Gandalf ,
Create an IO Through KO01 with extra Create AUC........
Then post the exp to AUC........
Then assign the settlement rule as Fixed assed and enter the Asset number and give % or amount....
Settle the IO through K088
Hope this will resolve your issue............
Regards
Kumar

Unable to Change Withholding Tax Base Amount while creating Service AP Invoice through DI API?

Dear All,
I am trying to create Service AP Invoice through DI API.
If I post the document without changing SAPPurchaseInvoice.WithholdingTaxData.TaxableAmount the dount ocument is created in SAP without any problem.
But if I change amount in above field then DI API throws error Unbalanced Transaction.
If I post same document in SAP with changed base amount it got posted in SAP without any Issue.
Where I am doing wrong?
please guide.
Using:
SAP B1 version 9 Patch Level 11
Location : India.
Thanks.

Hi ,
maybe you can find solution to these note 1812344
1846344 - Overview Note for SAP Business One 8.82 PL12
Symptom
This SAP Note contains collective information related to upgrades to SAP Business One 8.82 Patch Level 12 (B1 8.82 PL12) from previous SAP Business One releases.
In order to receive information about delivered patches via email or RSS, please use the upper right subscription options on http://service.sap.com/~sapidp/011000358700001458732008E
Solution
Patch installation options:
SAP Business One 8.82 PL12 can be installed directly on previous patches of SAP Business One 8.82
You can upgrade your SAP Business One to 8.82PL12 from all patches of the following versions:8.81; 8.8; 2007 A SP01; 2007 A SP00; 2007 B SP00; 2005 A SP01; 2005 B
Patch content:
SAP Business One 8.82 PL12 includes all corrections from previous patches for releases 8.82, 8.81, 8.8, 2007, and 2005.
For details about the contained corrections, please see the SAP Notes listed in the References section.
Notes: SAP Business One 8.82 PL12 contains B1if version 1.17.5
Patch download:
Open http://service.sap.com/sbo-swcenter -> SAP Business One Products -> Updates -> SAP Business One 8.8 -> SAP BUSINESS ONE 8.82 -> Comprised Software Component Versions -> SAP BUSINESS ONE 8.82 -> Win32 -> Downloads tab
Header Data
Released On
02.05.2013 02:34:18
Release Status
Released for Customer
Component
SBO-BC-UPG Upgrade
Priority
Recommendations/additional info
Category
Upgrade information
References
This document refers to:
SAP Business One Notes
1482452
IN_Wrong tax amount was created for some items in the invoice with Excisable BOM item involves
1650289
Printing Inventory Posting List for huge amount of data
1678528
Withholding amount in the first row is zeroed.
1754529
Error Message When Running Pick and Pack Manager
1756263
Open Items List shuts down on out of memory
1757641
Year-end closing
1757690
SEPA File Formats - New Pain Versions
1757898
Incoming Bank File Format
1757904
Outgoing Bank File Format
1762860
Incorrect weight calculation when Automatic Availability Check is on
1770690
Pro Forma Invoice
1776948
Calendar columns are wrong when working with Group View
1780460
OINM column description is not translated
1780486
UI_System crash when you set extreme value of double type to DataTable column
1788256
Incorrect User-Defined Field displayed in a Stock Transfer Request
1788372
ZH: 'Unacceptable Field' when export document to word
1788818
RU loc: No freight in the Tax Invoice layout
1790404
Cash Flow Inconsistency when Canceling Payment
1791295
B1info property of UI API AddonsInstaller object returns NULL value
1791416
Adding a new item to BoM is slow
1794111
Text is overlapping in specific localization
1795595
Change log for item group shows current system date in all the "Created" fields
1797292
Queries in alerts should support more query results
1800055
B1if_ Line break issue in inbound retrieval using JDBC
1802580
Add Journal Voucher to General Ledger report
1803586
Not realized payment is exported via Payment Engine using 'SAPBPDEOPBT_DTAUS' file format
1803751
Period indicator of document series can be changed although it has been used
1804340
LOC_BR_Cannot update Nota Fiscal Model
1805554
G/L Account displayed in a wrong position when unticking the checkbox "Account with Balance of Zero"
1806576
Payment Cannot Be Reconciled Internally
1807611
Cannot update UDF in Distribution Rule used in transactions
1807654
Serial No./Batch inconsistency by canceled Inventory Transfer
1808694
BR: Business Partner Code cannot be updated with CNPJ CPF error
1809398
CR_Cannot Display Related Multi-Value Parameters
1809758
Arrow key not work for Batch/Serial Number Transactions Report
1810099
Tax Amount is Recalculated Even if Tax Code Is Not Changed
1811270
Upgrade fails on Serial And Batches object with error code -10
1811846
Cannot run Exchange Rate Differences when multi branch is activated
1812344
Withholding Tax Amount Is Not Updated in Payment Once Witholding Tax Code Is Changed in Document through DI API
1812740
DI:"Operation Code" show wrong value when add "A/P Tax Invoice" based on "A/P Invoice"
1813029
US_Vendor address on 1099 Summary by Form/Box Report is not updated according to the latest Invoice
1813835
Wrong amounts of Goods Return in Open Item List
1814207
Preliminary page prints setting does not keep after upgrade
1814860
Value "Zero" cannot be imported to "Minimum Inventory Level" field via Excel file
1815535
RFQ: Web front end not displayed in supplier language
1815810
GT: Adding Incoming Payment for Some Cash Flow Relevant Accounts Fails
1816191
BR:System Crashes While Working with Tax Code Determination Window
1816611
CR_Crystal Report Displayed Incorrectly Afte

How to Read the "text file and csv file" through powershell Scripts

Hi All
i need to add a multiple users in a particular Group through powershell Script how to read the text and CSV files in powershell
am completly new to Powershell scripts any one pls respond ASAP.with step by step process pls
Regards:
Rajeshreddy.k

Hi Rajeshreddy.k,
To add multiple users to one group, I wouldn't use a .csv file since the only value you need from a list is the users to be added.
To start create a list of users that should be added to the group, import this list in a variable called $users, the group distinguishedName in a variable called $Group and simply call the ActiveDirectory cmdlet Add-GroupMember.
$Users = Get-Content -Path 'C:\ListOfUsernames.txt'
$Group = 'CN=MyGroup,OU=MyOrg,DC=domain,DC=lcl'
Add-ADGroupMember -Identity $Group -Members $Users

Error During install Exchange 2013 through Powershell on Server 2012 "Mailbox role: Client Access service"

Dear all
During install Exchange 2013 through Powershell on Server 2012 I got this error in Mailbox role: Client Access service :
The following error was generated when "$error.Clear();
$BEVdirIdentity = $RoleNetBIOSName + "\OWA (Exchange Back End)";
new-OwaVirtualDirectory -Role Mailbox -WebSiteName "Exchange Back End" -DomainController $RoleDomainController
set-OwaVirtualdirectory -Identity $BEVdirIdentity -FormsAuthentication:$false -WindowsAuthentication:$true;
" was run: "An error occurred while creating the IIS virtual directory 'IIS://MONAMBX2.mona.local/W3SVC/2/ROOT/o
wa' on 'MONAMBX2'.".
The following error was generated when "$error.Clear();
$BEVdirIdentity = $RoleNetBIOSName + "\OWA (Exchange Back End)";
new-OwaVirtualDirectory -Role Mailbox -WebSiteName "Exchange Back End" -DomainController $RoleDomainController
set-OwaVirtualdirectory -Identity $BEVdirIdentity -FormsAuthentication:$false -WindowsAuthentication:$true;
" was run: "The operation couldn't be performed because object 'MONAMBX2\OWA (Exchange Back End)' couldn't be fo
und on 'MonaDc1.mona.local'.".
Any advice please !!

I can't answer your question but I had a similar issue when I was trying to move our mailbox database off the C: drive. Our environment still has an Exchange 2007 server in it and when I was trying to move the database on the 2013 server, I would get
error messages saying the database does not exist. It seemed like it was trying to move the database on the 2007 server from the similar error messages that I was getting. To get around it, I deleted the database and created a new one on the drive
where we wanted it.
I discovered this when I was configuring the Antispam settings. I deleted our 2007 settings, added them to the 2013 shell, the settings appeared on our 2007 server. The shell on 2013 was making changes to 2007.
I'm not sure if there is a "Get|Set or New" command that I/we should be using when this happens. Or maybe my issues will be fixed if I just remove the Exchange 2007 server? I'm not ready to do that yet because I can't configure the spam filtering
on 2013 yet with its shell not being able to make the changes that we need.
I don't know if your environment is in coexistence mode like mine.
Hopefully someone else out there has an answer or can tell us when/how the shell can make the appropriate changes to the 2013 server. Does this happen after the 2007 server is removed?

How can I get the attributes details like user name, mail , from sAMAccount csv or notepad file through powershell or any other command in AD?

How can I get the attributes details like user name, mail , from sAMAccount csv or notepad file through powershell or any other command in AD?

Ok what about If i need to get all important attributes by comparing Email addresses from excel file and get all required answers
currently I am trying to verify how many users Lines are missing , Emp numbers , Phones from AD with HR list available to me.
I am trying to Scan all the AD matching HR Excel sheet and want to search quickly how many accounts are active , Line Managers names , Phone numbers , locations , title , AD ID .
these are fields I am interested to get in output file after scanning Excel file and geting reply from AD in another Excel or CSV file
Name’tAccountName’tDescri ption’tEma I IAddress’tLastLogonoate’tManager’tTitle’tDepartmenttComp
any’twhenCreatedtAcctEnabled’tGroups
Name,SamAccountName,Description,EmailAddress,LastLogonDate,Manager,Title,Department,Company,whenCreated,Enabled,MemberOf | Sort-Object -Property Name
Can you modify this script to help me out :)
Hi,
Depending on what attributes you want.
Import-Module ActiveDirectory
#From a txt file
$USERS = Get-Content C:\Temp\USER-LIST.txt
$USERS|Foreach{Get-ADUser $_ -Properties * |Select SAMAccountName, mail, XXXXX}|Export-CSV -Path C:\Temp\USERS-ATTRIBUTES.csv
#or from a csv file
$USERS = Import-CSV C:\Temp\USER-LIST.csv
$USERS|Foreach{Get-ADUser $_.SAMAccountName -Properties * |Select SAMAccountName, mail, XXXXX}|Export-CSV -Path C:\Temp\USERS-ATTRIBUTES.csv
Regards,
Dear
Gautam Ji<abbr class="affil"></abbr>
Thanks for replying I tried both but it did not work for me instead this command which i extended generated nice results
Get-ADUser -Filter * -Property * | Select-Object Name,Created,createTimeStamp,DistinguishedName,DisplayName,
EmployeeID,EmployeeNumber,Enabled,HomeDirectory,LastBadPasswordAttempt,LastLogonDate,LogonWorkstations,City,Manager,MemberOf,MobilePhone,PasswordLastSet,BadLogonCount,pwdLastSet,SamAccountName,UserPrincipalName,whenCreated,whenChanged
| Export-CSV Allusers.csv -NoTypeInformation -Encoding UTF8
only one problem is that Manager column is generating this outcome rather showing exact name of the line Manager .
CN=Mr XYZ ,OU=Users,OU=IT,OU=Departments,OU=Company ,DC=organization,DC=com,DC=tk

Setting Azure Website General Settings through Powershell

Hi,
I am looking for information on how to set the website general settings through powershell cmdlets. When I create a new Website through gallery and choose Apache Tomcat 7 it default selects the .net framework. I would like to set those off and use Java version
Don't see any commands to set that default while creating a website.
Also, how can I set an SSL certificate and traffic manager end point to my website using powershell cmdlets.
Thanks in Advance.
Trupt

Hi Trupt,
Based on my research, you can configure the Type to AzureWebsite when you use
Add-AzureTrafficManagerEndpoint or
Set-AzureTrafficManagerEndpoint cmdlets. Although the article below is for cloud service, you can change the type and follow it:
http://azure.microsoft.com/blog/2014/06/26/azure-traffic-manager-external-endpoints-and-weighted-round-robin-via-powershell/
In addition, based on my experience, you can create a SSL certificate via Azure PowerShell, however, there is no way to add it to a web site in Azure PowerShell.
Best regards,
Susie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

How to Turn On/Off Airplane mode in windows through powershell script

I want to turn on and off Airplane mode through powershell script, any way for this?
I know that there are some exe files that can be used, but still I want to do this from powershell script.

Hi,
According to your description, I would like to share the link with you:
Airplane Mode On or Off Shortcuts - Create in Windows 8
http://www.eightforums.com/tutorials/24541-airplane-mode-off-shortcuts-create-windows-8-a.html
If you want to the detail of the script, I suggest to post the question on Script Center forum for further help.
Script Center forum:
http://social.technet.microsoft.com/Forums/scriptcenter/en-US/home
Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
Regards,
Kelvin_Hsu
TechNet Community Support

Connect Office 365 Exchange Online through Powershell

I am trying to perform some operations on Exchange online(Office 365) through powershell.
First I created a new powershell session and exported the modules to local as "o365", so that on any later operation I no need to use Import-PsSession to download the required modules
$cred = Get-Credential
$s = New-PSSession -ConfigurationName "Microsoft.Exchange" -ConnectionUri "https://ps.outlook.com/powershell/" -Credential $cred -Authentication Basic -AllowRedirection
Export-PsSession -session $s -outputModule o365
Now, I am creating new session and importing the existing module "o365".
$cred = Get-Credential
$s = New-PSSession -ConfigurationName "Microsoft.Exchange" -ConnectionUri "https://ps.outlook.com/powershell/" -Credential $cred -Authentication Basic -AllowRedirection
Import-Module o365
Get-DistributionGroup
While running the command "Get-DistributionGroup", powershell prompts me to enter the office 365 credentials once again. Is it possible to avoid entering the credentials once again? I don't want to use Import-PsSession, since it takes more time.

Hi,
Not sure, if the following cmdlets can make a difference. Anyway, suggest you to try these:
$UserCredential = Get-Credential
$Session = New-PSSession -ConfigurationName Microsoft.Exchange -ConnectionUri https://outlook.office365.com/powershell-liveid/ -Credential $UserCredential -Authentication Basic -AllowRedirection
Import-PSSession $SessionGet-DistributionGroup
Regards from ExchangeOnline.in|Windows Administrator Area | Skype:[email protected]

App Deployment through powershell in SharePoint 2013

Hi,
Recently I have configured App Development Environment in SharePoint 2013,And we are able to deploy App through Visual Studio in our local Environment.
But when we are trying to Deploy App Package through PowerShell in our production ,it has been deployed successfully but when we are accessing that particular App it is showing blank screen.
Kindly any one provide me the solution.
Thanks in Advance.
Regards,
Dinesh Reddy
Regards, Dinesh R.

Hi,
A suggestion is that you can uninstall this app and then install it again to see if this operation can make it right.
If it is still a blank page after reinstalled, I would recommend to create a new and clean app to perform the deployment again.
Feel free to reply with the test result.
Best regards,
Patrick
Patrick Liang
TechNet Community Support

Creating Crawler impact rule through Powershell

Similar Messages

Maybe you are looking for