Windows Home Server 2011 and Home Hub 3

Hi All
Im getting a problem at the moment with my Home Hub 3, when configuring the router setup within WHS i get an port forwarding error. 
Now I've set Rules up for ports 80, 443, and 4125 to go to my server. I've also placed the server in the DMZ still no joy, currently all AV and Firewall has been disabled to!
Used http://www.canyouseeme.org/ and I can see ports 80 and 443 work but 4125 doesn't.
After trawling through random posts does anyone have an answer to how to correctly configure a HH3 or Do I need to change to a Business Hub, which was mentioned in another thread?
Thanks
Solved!
Go to Solution.

If BT used this forum to reply to problems/issues etc it would no longer be a site for BT USERS to talk to each other. BT does say that you can read advice usually good if you access this forum for help . But unless taken up by a Moderator this advice isnt "official" in the sense that BT agrees with every word. So in reality its "unofficial" but still mainly GOOD advice. Can you imagine if it was an site for  BT personel to answer the public? it would crash from the many postings and it would be a 24/7 job for official BT employees. And dont blame BT  many other large companies  are VERY hard to contact DIRECTLY. Try Microsoft they direct you to --LOG ME IN- in India where after an hour of conversation the operator says -SURE!!! WE can help you ---and that will be £150 -PLEASE. Try contacting Yahoo direct . No chance Many other big companies Wordwide do the same.   

Similar Messages

  • TS1490 i am running Windows Home Server 2011 and iTunes can't seem to connect to the iTunes Store nor run Genius on my Library.  What do I need to do?

    I am running Windows Home Server 2011 and have installed iTunes on my dedicated server, attached to my router.  I can't connect to the iTunes Store nor run Genius on the server ONLY (iTunes runs fine on by two other PCs and my Apple TV and I share the libary that resides on the server).  I am running a very current version of iTunes 64 bit.  I have run the connectivity test and it failed. 
    My guess is that there is some setting in the Server software that i need to change to let iTunes access urls or computers on the internet.  Does anyone have any experience with this software combination?
    Thank you

    Some guy managed to get this to work. The following link is for iTunes 10.5 but it should work for the current release.
    http://social.microsoft.com/Forums/en-US/whs2011/thread/bd62ee3d-a933-4cad-ae9b- fd38adc994c0
    Good luck!

  • HP Compaq MultiSeat ms6200 Desktop having windows multipoint server 2011 supports turbo c and c

    HP Compaq MultiSeat ms6200 Desktop having windows multipoint server 2011 supports turbo c and c 

    Hello Ashok007,
    I'm not understanding this post. Is there a question here somewhere? Are you having a problem or experiencing an issue?
    If I have helped you in any way click the Kudos button to say Thanks.
    The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
    - Friendship is magical.

  • Installation of CS6 Web & Design Premium in Windows Multipoint Server 2011

    Hi all,
    I am trying to install CS6 Web & Design Premium in Windows Multipoint Server 2011.
    But I am always getting the PDApp.exe crash message and can't even get into the installation wizard.
    Can anyone help me in resolving this problem?
    Actually I have tried to install it in normal mode or maintenance mode with UAC switched off already.
    In addition to this, can CS6 Web & Design Premium support Windows Multipoint Server 2011?
    The information for PDApp.exe crash is listed as follow:
    問題簽章:
      問題事件名稱:          APPCRASH
      應用程式名稱:          PDApp.exe
      應用程式版本:          7.0.0.189
      應用程式時間戳記:          50c9a261
      錯誤模組名稱:          KERNELBASE.dll
      錯誤模組版本:          6.1.7601.18015
      錯誤模組時間戳記:          50b83c8a
      例外狀況代碼:          000006ba
      例外狀況位移:          0000c41f
      作業系統版本:          6.1.7601.2.1.0.16.56
      地區設定識別碼:          3076
      其他資訊 1:          95cf
      其他資訊 2:          95cffe8a8dd0881229d8c1aa042bcd57
      其他資訊 3:          6a3c
      其他資訊 4:          6a3c6b3c38ebfac38d8be3e4a483fbe3
    閱讀我們的線上隱私權聲明:
      http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0c04
    Please let me know if more information is needed and I am willing to provide any information you need.
    Thanks very much for all your help. Really thanks!
    John

    Desktop products are generally not supported on server operating systems. That's all you will ever hear about the matter. That being so, you shouldn't expect anyone to have any answers for you. It's simply an exotic scenario and very few people, if any at all, will even have bothered to try.
    Mylenium

  • Firefox will not run for mulitple instances of the SAME user account on Windows Multipoint Server 2011

    We have an HP MS6200 MulitSeat PC
    It is running Microsoft Windows MultiPoint Server 2011 (which appears to be a tweaked version of Windows 7)
    It is set up in a computer lab, and students log in using their shared room account - ie multiple instances of the same user accounts are running on the PC at the same time.
    The first student to run Firefox can work with it without problem.
    However when another student tries to start firefox they get the following message:
    Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system.

    Thanks for the quick reply.
    I managed to get this to work by using:
    "C:\Program Files (x86)\Mozilla Firefox\firefox.exe" -profile "%temp%\ffprof" -no-remote
    This works because Windows assigns a different temp location for each instance of a user
    Thanks for your help

  • Crystal Reports Server 2011 and BW 7 as a data source for uploaded reports.

    Hello,
    I am hoping someone can provide me with a clear answer for this.
    Lets assume..
    1. We are running crystal reports server 2011 and BW 7
    2. We want to publish a report in the BI Launch pad so users can view it
    3. Can we create a crystal report in the report designer with the data source as BW 7 then upload it to the reports server and have it run on-demand and Run over night?
    Can anyone shed some light in this area?
    kind regards
    david

    Hi,
    Crystal Reports Server is not supporting the SAP Integration Kit. You will need BusinessObjects Edge or BusinessObjects Enterprise
    regards
    Ingo Hilgefort

  • Windows Home Server 2011 and Windows 8.1 desktop

    My questions is whether a Windows Live account and a local account can be combined in Windows 8.  I asked this question in Microsoft Community and
    an MS employee said I should ask my question here.
    Is there a way to have both active?
    I want to reap the benefits of having a live account to keep everything in sync and fully utilize the features of Windows 8.1 but I have a Windows Home Server 2011 that requires that I have a local user account that matches the server side so that I can
    use resources on the server.
    I've seen lots of tutorials for switching between the two account types but nothing for combining them.
    Is this even possible?
    Thanks in advance

    Your question has not been answered.
    Windows Home Server 2011 does not use domains, so even if you had Windows 8.1 Pro, you'd still be left without a solution. I have one PC with Windows 8.1 Enterprise and that does work with Home Server; and a laptop with Windows 7 Pro and that works fine
    too. Like you, I have issues with Windows 8.1 Pro.
    Does anyone from Microsoft Server actually read these posts?
    @PeterPensive,
    the OP's original question was relating to "linking/combining" an MS Account with a Win8.x local account. That question was answered. (the answer is no), so, for a WHS scenario, linked accounts aren't possible, but, in Win8.x, an MS Account might be suitable
    for use with WHS.
    Are you confirming that an MS Account on Win8.x works ok with WHS?
    < Also, this is a community-driven forum - MS staff rarely, if ever, participate here.. >
    Don
    (Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
    This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

  • Window SBS server 2008 and window server 2008 R2 on the same domain

    Hi all,
    I am a person only work for linux system. Recently i work for my company that using microsoft technologie. So i have a lot of trouble. Could you please help me and below are my big troble that i have met:
    In my system, i have the first window SBS server 2008 run on our domain. However my organization growth up and we have more than 150 users and mailbox of exchange server 2007. So i do not want to use my sbs server 2008 anymore.
    I am going to install a window server 2008 R2 64 bit and join it into the same domain with sbs server 2008. It will be replicate the username, dns, OU and group policy...After that i will tranfer FSMO role to new server and i will demote then remove the
    sbs server.
    My boss say that i should not use this solution because window server sbs can not run with any other kinds of window server 2008 (R2, standard, enterprise...) and it will automatically shutdown the main server after a couple of days.
    Someone have experience can help me. I am so confuse now

    Maybe this will also help to better understand the steps involved:
    Transition from Small Business Server to Standard Windows Server
    http://blogs.technet.com/b/infratalks/archive/2012/09/07/transition-from-small-business-server-to-standard-windows-server.aspx
    Migrating away from SBS 2011
    http://social.technet.microsoft.com/Forums/en-US/07c58cc4-7d6d-419a-b1a0-439c2cc0c48d/migrating-away-from-sbs-2011?forum=smallbusinessserver
    Migrating from SBS 2008 to Windows Server 2012 R2 (NOT Essentials and with NO Exchange)
    http://social.technet.microsoft.com/Forums/en-US/1276d2d3-a8f2-4786-82f3-4308a2affb11/migrating-from-sbs-2008-to-windows-server-2012-r2-not-essentials-and-with-no-exchange?forum=smallbusinessserver
    And remember, as long as you don't move the PDC to one of the new DCs, you can leave the SBS 2008 up indefinitely. But I would remove Exchange 2007 off it right away once I've migrated the mailboxes and public folders, otherwise
    you will get yourself into an Exchange coexistence scenario which is much more complex to configure and support because of the CAS differences, changing the URLs on the old one to "legacy.domain.com," getting a new UC/SAN cert with the correct
    names on it, and more. Believe me, you really don't want to coexist them. The only time I've coexisted Exchange versions is during large migrations, such as 500 or more. Otherwise, I just migrate the mailboxes over a weekend and get it done with.
    Ace Fekay
    MVP, MCT, MCSE 2012, MCITP EA & MCTS Windows 2008/R2, Exchange 2013, 2010 EA & 2007, MCSE & MCSA 2003/2000, MCSA Messaging 2003
    Microsoft Certified Trainer
    Microsoft MVP - Directory Services
    Complete List of Technical Blogs: http://www.delawarecountycomputerconsulting.com/technicalblogs.php
    This posting is provided AS-IS with no warranties or guarantees and confers no rights.

  • Windows 2003 Server Fax and Scan to WIndows 8.1

    I have a server with Windows Server 2003 on. We have computers running WIndows 2007 and Windows Fax and Server. All was great, could see the faxes inbox on the computer etc. Now I have a machine with 8.1 Pro and connected great to the Windows Server, can
    see the sent items but cannot see the inbox faxes! Really am stumped, any help would be great.

    Hi KFoote19,
    Before going further, would you please let me confirm whether this issue just occurred on Windows 8.1 Pro client
    computer? Were all Windows 7 client computers OK?
    Please follow the following KB and perform a clean boot in Windows 8.1, then monitor the result.
    How to perform a clean boot in Windows
    In addition, please
    reproduce this issue and use
    Process Monitor to check the process if you can find more clues.
    By the way, please check Event Viewer if you can find some relevant events.
    Hope this helps.
    Best regards,
    Justin Gu

  • Windows CAL server 2003 and Domain Server with a 2008 server as domain member

    We have a Windows Server 2003 as domain controller with 70 user CALs, and we have added a Windows 2008 R2 OEM with 5 users licences.
    I have no plans to migrate my domain controller 2003 to 2008 but the 2008 is a member of the domain and I need to know if we are fine with the licences.
    Thanks for your help,
    Alejandro Sueldo

    Hi
    You need CAL for anything that would access the 2008. If a server that is accessed by only 5 user you are ok, but if like a Exchange for your 70 users, then you have to buy more CAL. (that link explain it good;
    http://blogs.msdn.com/b/mssmallbiz/archive/2007/11/06/5942350.aspx)
    Contact the VLSC to be sure at 100% before buying; (866) 230-0560
    Regards, Philippe
    Don't forget to mark as answer or vote as helpful to help identify good information. ( linkedin endorsement never hurt too :o) )
    Answer an interesting question ? Create a
    wiki article about it!

  • Upgrade from Windows Home Server 2011

    Even though Windows Server 2012 Essentials is being mentioned as a replacement for Windows Home Server 2011, there doesn't seem to be any documentation or mention of can you upgrade from Windows Home Server 2011 to Windows Server 2012 Essentials?
    Will this work with the beta download and will we then be able to upgrade this version to the RC and/or release version?
    As you may guess I have a Windows Home Server 2011 and am interested in looking at Windows Server 2012 Essentials to see what it offers me. The storage spaces sounds exactly what I want to replace the drive extender on the previous home server version. The
    problem is that I don't mind sacrificing my present server box by installing the beta but it would be nice if it actually retained what settings it could via an upgrade option, which I could then have a chance of using with a proper release version.
     

    Just clarifying about the 'upgrade path' and 32b vs 64b.
    Yes, no in-place upgrade. However, one could theorise about some form of 'migration' being possible, where the list of users, the content of your shares, the current backups, would be 'moved' from old box to new.
    I was in fact pretty sure no such process existed. (Wouldn't it be neat though? AND in future _at least theoretically_ possible, using processes similar to SBS AD migration.)
    From this perspective putting the new box onto the network is similar to replacing WHSv1 with WHS11, in that nothing is carried over. No gain, but no lesser. Working on currently available information.
    The later comment about the work laptop is, TTBOMK, a resounding 'NO'. When attempting to join a member of another AD the 'connect' process stated 'You must 1st remove the PC from the other AD'. I haven't tested this extensively but believe that PC's _capable_
    of operating in an AD (Pro, vs Home, versions) will be made members of the WS12E AD. It is only PC's that do not have 'domain join' capability that are left in workgroup mode.
    TTBOMK, AFAICS, so far, etc...

  • Setting up Windows Home server 2011 on Microserver

    This is the first time I have played with a server although lots of experience of setting up desktops.  I have a HP proliant microserver and have added a couple of extra 500gb drives.  I have just installed Windows Home Server 2011 and can't see the extra drives in windows explorer.    I assume that I need to change something in the BIOS or am I missing something?  My aim is to set the extra drives up as some form of RAID or mirroring.  Any help welcome.
    Thanks

    You should use HP smart start DVD to install the Windows Home Server. If you are booting directly from the Windows DVD it would some times not detect the drivers because of the hardware compatibility issue. You should contact the the vendor and seek help
    from him.
    http://www.arabitpro.com

  • Home Server 2011 Stopped Working

    Hey there. I work with a windows Home Server 2011 and recently it wasn't accessing a certain report that I need. I restarted it to see if that would fix it. When it restarted, it went through the Windows loading screen, then went to a black screen. I could
    not get it to boot into safe mode. After about 10 minutes of nothing, I hard reboot it. I did this process 2 or 3 more times to no avail. Now the server will not even power on. Does anyone have any ideas or suggestions to troubleshoot this? 

    Hi amazingbass,
    As you mentioned the server not even power on, it mostly is some hardware may have issue, please contect your hardware vendor for the first step troubleshooting. Bas on my experience and from your description the server went black screen and can not complete
    startup it some times caused by the disk corrupt, you can focuse this issue first.
    Best regards.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Need a 32-bit windows home server driver for a cp2025 printer

    I have a Windows Home Server 2011, and multiple Windows XP workstations. I need an XP driver for a CP2025DN printer that I can load onto the WHS 2011, as I want to configure the WHS as a Print Server. The WHS does not recognize (like) the HP Universal drivers, and I do not want to use the Express install download packages. All I need is a driver, like we used to be able to download.
    Anyone have any suggestions/hints?

    those may be helpful...
    http://social.technet.microsoft.com/Forums/en-US/a129f49a-0216-41f0-b190-3efb46fbb8ac/generic-text-only-driver-on-windows-2008-server-r2?forum=winserverprint
    http://blogs.technet.com/b/yongrhee/archive/2009/09/14/how-to-add-64-bit-print-drivers-on-32-bit-windows-server-2003-or-windows-server-2008-print-server.aspx
    Best,
    Howtodo

  • Migrate Windows Essential Business Server 2011 to Windows 2012 R2.

    We are running Windows Essential Business Server 2011 and plan to migrate it to Windows Server 2012 R2. Can someone direct a step by step article or links? Thank you.
    Bob Lin, MCSE & CNE Networking, Internet, Routing, VPN Troubleshooting on <p><a href="http://www.chicagotech.net"><span style="color:#0033cc">http://www.ChicagoTech.net<br/> </span></a></p>
    How to Setup Windows, Network, VPN &amp; Remote Access on <p><a href="http://www.howtonetworking.com"><span style="color:#0033cc">http://www.howtonetworking.com<br/> </span></a></p>

    There's no step by step, Bob.  Did you get the EBS transition documentations and software when it was offered after EBS was shut down?
    Unfortunately TechNet isn't coming back, sorry folks :-(

Maybe you are looking for