Creating database in unix

Hi experts,
One of the unix server already has database i.e orcl, if i want to create new database do i have to configure the semophores and share segment again. Please help creating new database which already has a database in it, what are measures to be taken in the unix server
Thanks

Hi,
##Please help creating new database which already has a database in it, what are measures to be taken in the unix server
Just invoke DBCA and create the new database. it is advisable to create and use templates as per your requirements.
Thanks
--Raman

Similar Messages

Create second database in unix

Hi, I am trying to create a second database in Oracle 10g in solaris 10. I know i need to set up the ORACLE_SID
i have 2 questions.
if i set up ORACLE_SID, am i orverwriting the current ORACLE_SID? or i am just creating another one.
another question, when i do setenv ORACLE_SID catdb
the command failed, it tells me setenv not found.
thanks.

create database catdb
2 logfile group1 ('/data/oradata/catdb/redo1.log') size 10M,
3 group 2 ('/data/oradata/catdb/redo2.log') size 10M,
4 group 3 ('/data/oradata/catdb/redo3.log') size 10M
5 datafile '/data/oradata/catdb/dbcatdb.dbf'
6 size 80
7 autoextend on next 8M maxsize unlimited extent management local
8 sysaux datafile '/data/oradata/catdb/sysaux.dbf'
9 size 16M
10 autoextend on next 4M maxsize unlimited
11 undo tablespace undo
12 default '/data/oradata/catdb/undo.dbf'
13 size 10M
14 default temporary tablespace temp
15 tempfile '/data/oradata/catdb/temp.dbf'
16 size 10M;
it tells me invalid option line 2
any idea? Thanks.

Create database in 8.1.7,

hi,
Is there any GUI tool in 8.1.7 to create database pls assist.

Hi,
DBCA is available in Oracle9.x.x.x versions. If it's available in 8.1.7 you can create a database with it. If you are working with Unix flavours it'll be stored in /bin/dbca. you can run dbca for creating a database. I think you are working in WindowsXP. If that's the case you can go for Start>Programs>OracleHome>Configuration and Migrationtools>Database Configuration Assistant.
Regards,
Raj

Write blob data from database to unix server

Hi all,
I need to send the attachment file into the mail. I have a header form in which I have implemented Download/Upload functionality using Apex user guide. When ever a user fill all the entries and submit the form then some field information along with attachment I need to send to the user.
I mean when ever user hit the submit button it should take blob data from my custom table tmp_downlod_files and send to the user as an attachment.
I have searched the post and got lot information but not able to get succeed.
I have implemented java stored procedure for sending automatic mail when user is submitting the form but what I need is to take blob content from database and send as an attachment.
1: So I need to write blob content from custom table to unix server in some location and from there I need to attach that file.
2: the java store which I have implemented for sending automatic mail is working and one argument is attachment which I am passing null for now. So mail is working how to write the file from database to unix server and send as an attachment.
What I did for writing file from database to unix server:
1:
CREATE OR REPLACE PROCEDURE trx_blob_to_file (l_header_id IN NUMBER)
IS
BEGIN
FOR rec_picture IN (SELECT ID
FROM TMP.tpx_download_files
WHERE header_id = l_header_id
AND mime_type LIKE ('image' || '%'))
LOOP
DECLARE
l_out_file UTL_FILE.file_type;
l_buffer RAW (32767);
l_amount BINARY_INTEGER := 32767;
l_pos INTEGER := 1;
l_blob_len INTEGER;
p_data BLOB;
file_name VARCHAR2 (256);
BEGIN
SELECT blob_content, filename
INTO p_data, file_name
FROM tpx_download_files
WHERE ID = rec_picture.ID;
l_blob_len := DBMS_LOB.getlength (p_data);
l_out_file :=
UTL_FILE.fopen ('/home/oracle/interfaces/out/upld',
file_name,
'wb',
32767
WHILE l_pos < l_blob_len
LOOP
DBMS_LOB.READ (p_data, l_amount, l_pos, l_buffer);
IF l_buffer IS NOT NULL
THEN
UTL_FILE.put_raw (l_out_file, l_buffer, TRUE);
END IF;
l_pos := l_pos + l_amount;
END LOOP;
UTL_FILE.fclose (l_out_file);
EXCEPTION
WHEN OTHERS
THEN
IF UTL_FILE.is_open (l_out_file)
THEN
UTL_FILE.fclose (l_out_file);
END IF;
END;
END LOOP;
END;
2: I have written a PL/SQL process and calling the above procedure on SUBMIT:
DECLARE
l_header_id NUMBER;
l_filename VARCHAR2 (200);
BEGIN
SELECT header_id, filename
INTO l_header_id, l_filename
FROM tpx_download_files
WHERE header_id = :p35_sr_header_id;
trx_blob_to_file (l_header_id);
END;
But it is not writing the file from database to unix server.
If I can get how to make working to write file from database to unix server then I will hopefully can send an attachment.
3; I have given
GRANT EXECUTE ON TPX_BLOB_TO_FILE TO PUBLIC.
And
GRANT EXECUTE ON UTL_FILE TO PUBLIC.
Where I am doing wroung can anyone guide me or any other approach is appreciated.
I am already late so I need soon. Please help.

Hi all,
I need to send the attachment file into the mail. I have a header form in which I have implemented Download/Upload functionality using Apex user guide. When ever a user fill all the entries and submit the form then some field information along with attachment I need to send to the user.
I mean when ever user hit the submit button it should take blob data from my custom table tmp_downlod_files and send to the user as an attachment.
I have searched the post and got lot information but not able to get succeed.
I have implemented java stored procedure for sending automatic mail when user is submitting the form but what I need is to take blob content from database and send as an attachment.
1: So I need to write blob content from custom table to unix server in some location and from there I need to attach that file.
2: the java store which I have implemented for sending automatic mail is working and one argument is attachment which I am passing null for now. So mail is working how to write the file from database to unix server and send as an attachment.
What I did for writing file from database to unix server:
1:
CREATE OR REPLACE PROCEDURE trx_blob_to_file (l_header_id IN NUMBER)
IS
BEGIN
FOR rec_picture IN (SELECT ID
FROM TMP.tpx_download_files
WHERE header_id = l_header_id
AND mime_type LIKE ('image' || '%'))
LOOP
DECLARE
l_out_file UTL_FILE.file_type;
l_buffer RAW (32767);
l_amount BINARY_INTEGER := 32767;
l_pos INTEGER := 1;
l_blob_len INTEGER;
p_data BLOB;
file_name VARCHAR2 (256);
BEGIN
SELECT blob_content, filename
INTO p_data, file_name
FROM tpx_download_files
WHERE ID = rec_picture.ID;
l_blob_len := DBMS_LOB.getlength (p_data);
l_out_file :=
UTL_FILE.fopen ('/home/oracle/interfaces/out/upld',
file_name,
'wb',
32767
WHILE l_pos < l_blob_len
LOOP
DBMS_LOB.READ (p_data, l_amount, l_pos, l_buffer);
IF l_buffer IS NOT NULL
THEN
UTL_FILE.put_raw (l_out_file, l_buffer, TRUE);
END IF;
l_pos := l_pos + l_amount;
END LOOP;
UTL_FILE.fclose (l_out_file);
EXCEPTION
WHEN OTHERS
THEN
IF UTL_FILE.is_open (l_out_file)
THEN
UTL_FILE.fclose (l_out_file);
END IF;
END;
END LOOP;
END;
2: I have written a PL/SQL process and calling the above procedure on SUBMIT:
DECLARE
l_header_id NUMBER;
l_filename VARCHAR2 (200);
BEGIN
SELECT header_id, filename
INTO l_header_id, l_filename
FROM tpx_download_files
WHERE header_id = :p35_sr_header_id;
trx_blob_to_file (l_header_id);
END;
But it is not writing the file from database to unix server.
If I can get how to make working to write file from database to unix server then I will hopefully can send an attachment.
3; I have given
GRANT EXECUTE ON TPX_BLOB_TO_FILE TO PUBLIC.
And
GRANT EXECUTE ON UTL_FILE TO PUBLIC.
Where I am doing wroung can anyone guide me or any other approach is appreciated.
I am already late so I need soon. Please help.

Oracle10g Import:ORA-01119: error in creating database

I am trying to Import a Oracle10g dump into a Oracle 10g db server(SunOS).The server has enough space and so do the tablespace.
This is the import command i'm trying:
imp db/db@sid file=file.dmp ignore=y full=y
But it still posts the following error:
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
Export file created by EXPORT:V10.02.01 via conventional path
Warning: the objects were exported by OPS$QZORA, not by you
import done in US7ASCII character set and AL16UTF16 NCHAR character set
import server uses WE8ISO8859P1 character set (possible charset conversion)
export client uses UTF8 character set (possible charset conversion)
. importing SYSTEM's objects into SYSTEM
IMP-00017: following statement failed with ORACLE error 1119:
"CREATE TABLESPACE "NEW" BLOCKSIZE 8192 DATAFILE '/home/NEW01.d"
"bf' SIZE 2000M , '/home/NEW02.dbf' SIZE 3000M , '/u03/bm"
"qzdb/NEW03.dbf' SIZE 2000M , '/u03/bmqzdb/NEW04.dbf' SIZE 3000M "
" , '/home/NEW05.dbf' SIZE 2000M , '/home/NEW06.d"
"bf' SIZE 5900M , '/home/NEW07.dbf' SIZE 943718400 , '/u0"
"1/bmqzdb/NEW08.dbf' SIZE 734003200 , '/home/NEW09.dbf' SIZ"
"E 144703488 , '/home/NEW10.dbf' SIZE 144703488 , '/u01/b"
"mqzdb/NEW11.dbf' SIZE 81788928 , '/home/NEW12.dbf' SIZE 15"
"00M AUTOEXTEND ON NEXT 8192 MAXSIZE 2000M, '/home/NEW13.dbf"
"' SIZE 1048576000 AUTOEXTEND ON NEXT 8192 MAXSIZE 2000M EXTENT MANAG"
"EMENT LOCAL AUTOALLOCATE ONLINE PERMANENT SEGMENT SPACE MANAGEMENT AUTO"
IMP-00003: ORACLE error 1119 encountered
ORA-01119: error in creating database file '/home/NEW01.dbf'
ORA-27040: file create error, unable to create file
SVR4 Error: 2: No such file or directory
IMP-00000: Import terminated unsuccessfully

Actually i dont want that to create any tablespaces.I have a tablespace created on my db.In fact i dont have the same (/home) path on my unix server.
I want the imp utility to ignore create tablespace command.I did give the IGNORE=Y on the imp command.
If i give fromuser,touser i can import but that does not go along with full=y.I have to do it table by table.It has also got sequences,types,synonyms etc
thanks in advance
shiva

Create database

Hi Experts,
I am installing Solution manager EHP1 on SUSE Linux 10 , SP2 on Database Oracle 10g .
While Instlling , i am struck in the Phase "Create Database "
Pls find the error screen shot
ERROR 2009-09-01 09:49:58.594
CJSlibModule::writeError_impl()
MUT-03025 Caught ESAPinstException in Modulecall: Executable /oracle/CBL/102_64/bin/sqlplus terminated with exit code 0 but did not produce any output. DIAGNOSIS: This indicates that the SQL script or statement could not be executed successfully and that the Oracle software might not be functioning properly. SOLUTION: Check whether the Oracle software is damaged and reinstall it if necessary..
Shall appreciate if you can suggest what is do be done to sort the same . I am installing this at the client place n need your help .
Pls give the breif steps to solve ....
With Regards,
Rahul Bibekar

> During input phase only sapint will check for Oracle software if I am not wrong.
If you do the installation properly you
- start sapinst (first!)
- you continue with the installation until sapinst stops and request you to start the database software installation
- then you install the Oracle software with the given script (RUNINSTALLER)
- you apply the patches (10.2.0.2 or 10.2.0.4)
- you patch the OPatch tool
- you apply the all interim patches (on Unix using MOPatch)
- and you THEN press on OK to continue.
> If it not able to find Oracle software, it will give popup saying
>
> Oracle not found, Install oracle and Press OK to continue
If that message appears you did not follow the installation guide.
Most installation problems (environment variables, listener, sql scripts, R3load etc.) come because people tend to install the database before they start sapinst - which is wrong if you install a SAP system.
I have done many many installations on various platforms and I never got the error message that "Oracle is not installed".
Markus

Errors and Queries regarding manually create database in oracle 9i

Create database manually with following steps:
1) Create SID
C:\> set ORACLE_SID=mynewdb
2)Create suitable database directories within oracle directory.
Create folders udump,cdump,bdump within C:\oracle\admin\mynewdb\
3)Create PFILE
4)Create a password file using:
C:\> orapwd file=C:\oracle\ora90\database\PWDmynewdb.ora password=oracle
5)Create an instance of database
C:\> oradim -new -sid mynewdb
6)Start sqlplus:
C:\> sqlplus\nolog
7)connect / as sysdba
8)startup nomount
9)Run CREATE DATABASE script
'Database Created' prompt display on screen.
11) Run two scripts i.e. catalog.sql and catproc.sql
Following are errors and queries related to database creation. :
Errors+_
Following error occur when start database:
Total System Global Area 336359616 bytes
Fixed Size 282816 bytes
Variable Size 234881024 bytes
Database Buffers 100663296 bytes
Redo Buffers 532480 bytes
Database mounted.
ORA-01092: ORACLE instance terminated. Disconnection forced
For start database I give following command, but it gives me same error:
STARTUP OPEN PFILE='c:\ORACLE\ORA90\DATABASE\initmynewdb.ora'
or
STARTUP FORCE OPEN PFILE='c:\ORACLE\ORA90\DATABASE\initmynewdb.ora'
or
STARTUP OPEN
or
STARTUP FORCE OPEN
Queries_
*1)There are one databases in my machine name "orcl"*
when I give commands
C:\> connect / as sysdba
C:\> startup nomount
When I run "connect / as sysdba", in this which database instance connect?
how the oracle will know to start mynewdb database instance in nomount? although I am not create database.
*2) Step "startup nomount". In this, which database started in nomount?*
*3) There is no reference for PFILE in CREATE DATABASE script. How the oracle will know which is the PFILE for database mynewdb?*
*4) I create password file, how the oracle will know password file for which database (in this case mynewdb database)? How to map password file with particular database?*
Thanks and Regards,
Sachin

Hi,
not any thing new from the already given answer. But, i hope this examples gives more clarity.
Answers below:
1) ORACLE_SID is the answer
2) see the output below.
SQL> startup nomount
ORACLE instance started.
Total System Global Area 61785680 bytes
Fixed Size 730704 bytes
Variable Size 58720256 bytes
Database Buffers 2048000 bytes
Redo Buffers 286720 bytes
SQL> select instance_name from v$instance;
INSTANCE_NAME
mytestdB
SQL>
SQL> show parameter db_name
NAME TYPE
VALUE
db_name string
mytestdB
3) Check environment variables for ORACLE_HOME variable will let you know the location of the PFILE. By default it will be ORACLE_HOME/database (windows), ORACLE_HOME/dbs (LINUX/UNIX).
SET command will help you or use widows options.
In some other cases, the PFILE contains the link to it with IFILE value left in PFILE which should show the location.
4) Check environment variables for ORACLE_HOME variable will let you know the location of the password file. By default it will be expected in ORACLE_HOME/database (windows), ORACLE_HOME/dbs (LINUX/UNIX).
Regrds,
Vasu.

Creating database in oracle 8.0.6

Hi
I hv installed oracle 8.0.6 on a machine having HP Unix U 9000
Now i have to create a new database on the same machine. i have read about oracle enterprise manager and database manager. but i tried "oemapp console" command but it is not working.
can anybody please help me with the steps involved in creating database in oracle 8.0.6.
thanks
sidhu

Hi,
I'm not sure, but maybe you need run the command ./orainst /c
and choice Install, Upgrade or De-install software
or choice Install new product-Create DB objects
Cheers

OWB 10g -- Can't Create Database Links for Data Source and Target

We installed OWB 10g server components on a Unix box running Oracle 10g (R2) database. The Designer Repository is in one instance. The Runtime Repository and the Target are in another instance. The OWB client component was installed on Windows XP. We create a data source module and a target module in OWB. The data source is on another Unix box running Oracle 9i (R2) database. We try to create database links for data source module and target module, respective. But when we created and tested the DB links, the DB links were failed.
For the database link of data source, we got the following error message:
Testing...
Failed.
SQL Exception
Repository Error:SQL Exception..
Class Name: CacheMediator.
Method Name: getDDEntryFromDB.
Repository Error Message: ORA-12170: TNS:Connect timeout occurred
For the database link of target , we got the following error message:
Testing...
Failed.
API2215: Cannot create database link. Please contact Oracle Support with the stack trace and the details on how to reproduce it.
Repository Error:SQL Exception..
Class Name: oracle.wh.ui.integrator.common.RepositoryUtils.
Method Name: createDBLink(String, String, String, String).
Method Name: -1.
Repository Error Message: java.sql.SQLException: ORA-00933: SQL command not properly ended.
However, we could connect to the two databases (data source and target) using the OWBs utility SQL Plus.
Please help us to solve this problem. Thank you.

As I said prior the database link creation should work from within the OWB client (also in 10).
Regarding your issue when deploying, have you registered your target locations in the deployment manager and did you first deployed your target location's connector which points out to your source?
I myself had some problems with database link creations in the past and I can't remember exactly what they were but it had something to do with
- the use of abnormal characters in the database link name
- long domain name used in as names.default_domain in my sqlnet.ora file
What you can do is check the actual script created when deploying the database link so see if there's something strange and check if executing the created script manually works or not.

Specify datafiles in the create database statement-plz help

hi i have the following create database statement...
i need to add 2 more datafile and a tablesapce for data named dqdata.. how do i do that...
create database ABC123
logfile group 1 ('/retu/oraredo/ABC123/redo01.log') size 500M,
group 2 ('/retu/oraredo/ABC123/redo02.log') size 500M,
group 3 ('/retu/oraredo/ABC123/redo03.log') size 500M
character set WE8ISO8859P1
national character set utf8
     datafile '/retu/oracle/oradata/dev/ABC123/system01.dbf'
size 2000M
autoextend on
next 100M maxsize unlimited
     extent management local
sysaux datafile '/retu/oracle/oradata/dev/ABC123/sysaux01.dbf'
size 2000M
autoextend on
next 100M
maxsize unlimited
undo tablespace UNDO
datafile '/retu/oracle/oradata/dev/ABC123/undo01.dbf'
size 2000M,
     datafile '/retu/oracle/oradata/dev/ABC123/undo02.dbf'
size 2000M,
     datafile '/retu/oracle/oradata/dev/ABC123/undo03.dbf'
size 2000M,
default temporary tablespace temp
tempfile '/retu/oracle/oradata/dev/ABC123/temp01.dbf'
size 2000M,
     tempfile '/retu/oracle/oradata/dev/ABC123/temp02.dbf'
size 2000M,
     tempfile '/retu/oracle/oradata/dev/ABC123/temp03.dbf'
size 2000M;
=======================
THESE ARE THE DATAFILES I NEED AND EACH IS OF 2000M...
FOR DATA TBALESPACE NAMED DQDATA----
/retu/oracle/oradata/dev/ABC123/dqdata01.dbf
/retu/oracle/oradata/dev/ABC123/dqdata02.dbf
/retu/oracle/oradata/dev/ABC123/dqdata03.dbf
/retu/oracle/oradata/dev/ABC123/dqdata04.dbf
/retu/oracle/oradata/dev/ABC123/dqdata05.dbf
FOR INDEX TABLESPACE NAMED DQINDEX
/retu/oracle/oradata/dev/ABC123/dqindex01.dbf
/retu/oracle/oradata/dev/ABC123/dqindex02.dbf
/retu/oracle/oradata/dev/ABC123/dqindex03.dbf
/retu/oracle/oradata/dev/ABC123/dqindex04.dbf
/retu/oracle/oradata/dev/ABC123/system01.dbf
/retu/oracle/oradata/dev/ABC123/temp01.dbf
/retu/oracle/oradata/dev/ABC123/temp02.dbf
/retu/oracle/oradata/dev/ABC123/temp03.dbf
/retu/oracle/oradata/dev/ABC123/undo01.dbf
/retu/oracle/oradata/dev/ABC123/undo02.dbf
/retu/oracle/oradata/dev/ABC123/unod03.dbf
COULD OU PLEASE LET ME KNOW HOW DO I DO THAT................
AM VERY VERY CONFUSED I THIS...
AND I SUPOSE I NEED TO CREATE THEM physically in the unix right?????
please help
/retu/oracle/oradata/dev/ABC123/sysaux

Yes, you are right, there is no clause in CREATE DATABASE command to
create additional tablespaces except the TEMPORARY and UNDO besides
SYSTEM and SYSAUX. Here is link that you can refer to:
http://www.lorentzcenter.nl/awcourse/oracle/server.920/a96521/create.htm#1000691

Creating database (confused!)

hi,
it says that when you're creating a database, you have to log into the database as sysdba, and then do create database...but how can you log in to the database when it hasn't even yet been created? I mean, how can you connect as sysdba, because the database does not even yet exist and therefore neither should this privilege?
thanks.

Once you are in the nomount stage,you need to issue the command
connect / as sysdba
Here the "/" implicitly connects you as Sys schema..
There's nothing implicit about this at all. The command 'connect / as sysdba' means "please connect me to an instance, authenticating me using OS authentication methods, and I want to claim the SYSDBA system privilege whilst doing so".
Exactly the same effect can be achieved by issuing the command "connect sys/fred as sysdba". This simply means "connect me to an instance, authenticating me with an Oracle password file, and I want to claim the SYSDBA system privilege whilst doing so".
In neither case is the connection to the SYS schema "implicit", since the request for SYSDBA privileges is explicit in both -and the only "schema" that can ever acquire SYSDBA privileges is SYS's.
The only difference between the two forms of the connection command, in fact, is whether to use OS or password file authentication.
This fact makes it all the more unfortunate that you would go on to write, "You will log in to your instance using this command and than will issue ,create database command.Oracle maintains the Sys user's password in a password file."
If, as you say, Oracle is maintaining something in a password file, then the connection command you actually gave (which very deliberately didn't mention a password!) shouldn't be used (the idea of a password file is that you should supply the password when connecting!). If you're going to use the password-less form of the connection string, then the one thing you can say with some confidence is that there is NOT a password file (or, at least, that its existence is entirely optional).
Your answer also completely misses the point that I might well connect as follows: connect hjr/dizwell as sysdba. That's password file authentication, requesting the SYSDBA system privilege. I will end up connected using hjr's credentials -but a 'show user' in SQL*Plus will STILL show me connected as SYS.
A more meaningful answer to the original question (of "how can you log in to the database when it hasn't even yet been created") is very simple:
1. No-one ever logs onto a database. Ever.
2. People only ever connect to an instance.
3. Usually, the database tables (USER$, for example) are used to check on user names and passwords and privileges to work out whether you are allowed to connect to an instance or not. That's called 'data dictionary authentication' -and obviously can only happen once the database exists, those tables exist and can be read and accessed properly ...post-database-creation, in other words, and post-database-opening.
4. A 'privileged user' is one who is allowed to perform the five privileged actions (which are: startup, shutdown, backup, recover and create)
5. Privileged users are never authenticated by the data dictionary, at least partly because of the Catch22 situation you describe: how can we use a data dictionary table to authenticate whether you are allowed to create (or startup!) the very thing needed to store that table in the first place
6. Privileged users are therefore always only ever authenticated either by the OS (membership by an ordinary user of the OS of an appropriate OS group -such as dba on Unix or ORA_DBA on Windows); or by a password file
7. OS group membership or password files are external to the database -that is, their existence has nothing to do with whether the database exists or has been opened for business.
8. Therefore, privileged users can be authenticated whether a database exists or has been opened for business or not.
9. There is actually only ever one privileged user: SYS. Therefore, you can connect as SYS regardless of whether a database exists or has been opened for business or not.
And how you connect as SYS (which of the two authentication methods you want to use, in other words -and which is the only thing your answer concerned itself with) is completely and utterly irrelevant to all of that.

Unable to Load Database/Unable to create database.

RoboHelp 6.0 on my PC is suddenly unable to open existing
projects or create new ones. The problem is not in the projects, as
other people can unzip the same set of files and open them with
RoboHelp on their PCs.
The Details:
When attempting to open an existing project (any project
whether in version control or not), I get the message " Open
project was cancelled or the application was unable to load
database for..."
I found the article that says to delete the CPD and XPJ files
and then to use the Edit option to open the HHP file so that
RoboHelp will recreate the two files. When I try that, I get the
message "Unable to create database. Check that the directory is not
read-only." It's
not read-only.
When I attempt to create a new project, the application acts
like it is going to create one, but it just creates a project
folder without the new first topic and then repeats the New Project
Wizard window that prompts for title, etc. It will keep creating
folders and returning to this window in a loop without ever really
creating a project.
RoboSource Control is functioning normally, by the way.
I have uninstalled and reinstalled RH 6 several times, and
have even uninstalled RH 6 and installed to RH 5 just to see if it
could open projects, which it does with no problems. After that
test, I uninstalled RH 5 and reinstalled RH 6, only to encounter
the same problem all over again.
This started happening after I uninstalled other unrelated
software and received a message that some Service Pack 2 files had
been changed and prompting me to insert the Service Pack 2 CD,
which I don't have. This is because our IT department pre-builds
our systems from an image and then distributes job-specific
applications over the network. IT tried repairing Service Pack 2,
but that didn't work. I'd like to uninstall and reinstall Service
Pack 2, but the IT person says it's too risky on a system that was
built from an image.
We would like to find out
which files RoboHelp is looking for when it launches a
project so we can replace those files manually. Does anyone
know what they are or have another suggestion that might fix the
problem?
Otherwise, I am stuck having to allow IT to rebuild my
system. That means reinstalling and reconfiguring everything on it,
just as if I were upgrading to a new PC. This can take a whole work
week. However, I have already spent close to a work week on this
problem, so maybe rebuilding would save time in the long
run.

Problem Resolution = HHA.dll
For anyone who might be interested in the resolution to this
issue, we did rebuild my PC and reinstall all of my software. The
RoboHelp installation "complained" that I did not have HTML Help
Workshop on my system and told me to download version 1.4 from
Microsoft. I did have HTML Help Workshop..it's in my programs list.
(It's not listed in programs on my co-workers' PCs, and they were
not having problems, by the way.) But to make RH happy, I
uninstalled the workshop and tried to install the version from
Microsoft. But a message informed me that I already had a newer
version of the workshop on my system, and I was back where I
started. I could open projects, but there were weird problems.
Selecting Topic Properties was met with an error message, and when
the properties window opened, I could only see whatever template
was assigned (or none if the topic had lost its template), and
there was an extra section for Oracle help.
So I started dinking around in the registry to see if I could
get rid of any traces of the workshop so I could install the
version RH wanted or to find any other clues to my problem. Under
HTMLHelpAuthor, there was a reference to an HHA.dll file located in
C:\WINDOWS\system32...only the file did not exist on my system.
(Remember that my original problem was that some Service Pack 2
files were either modified or missing.) So I did a Google search on
that file name and found out that HTML Help Workshop is included in
newer Windows operating systems, but that people used to have to
get HTML Help Workshop from Microsoft, and that some people had
made the mistake of just putting the HHA.dll file into the
C:WINDOWS\system32 folder without also installing HTML Help
Workshop. At this point it was obvious that I needed the HHA.dll,
so I got it from a co-worker's PC. (Looking at the registry
entries, I can also see that my system was built with a slightly
different version of the operating system than my co-workers have.)
Adding the HHA file to my system solved the problem. All
projects but one were fine; one was still exhibiting the strange
behavior. I fixed it by going back to the RoboHelp 5 version of the
project and re-converting it to RoboHelp 6.
I suspect that if I had known about the HHA.dll file before
we rebuilt the PC, I could have solved the problem without going
through that painful process. That is why I thought I should post
the solution even though it was after the rebuild.

Installation stuck at Create database schema Phase 13 of 27

Hi
I am installing the Netweaver 7.01 SP3 and have already removed it completely after getting stuck at the same installation step. Do not know what is going wrong. A small extract of the log is shown below. Any advice on how to proceed will be helpful. I know when einstalling it has to be removed completely which I did using uninstallation and then clean up tool. But again it is stooping at the same step. I had let it run more almost two days but of no use. My system configuration is good enough with 2GB RAM etc.
INFO       2009-03-12 16:52:00.443 [synxcpath.cpp:807]
           CSyPath::createDirectory()
Creating directory C:\sapdb.
INFO       2009-03-12 16:52:00.458 [synxcpath.cpp:807]
           CSyPath::createDirectory()
Creating directory C:\sapdb\NSP.
INFO       2009-03-12 16:52:00.458 [synxcpath.cpp:807]
           CSyPath::createDirectory()
Creating directory C:\sapdb\NSP\saplog.
INFO       2009-03-12 16:52:00.474 [synxcpath.cpp:807]
           CSyPath::createDirectory()
Creating directory E:\sapdb\NSP\sapdata.
INFO       2009-03-12 16:52:01.67 [sixxcstepexecute.cpp:790]
Execute step sdb_create_db_instance of component |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_ADA_DB|ind|ind|ind|ind|6|0|SdbPreInstanceDialogs|ind|ind|ind|ind|4|0|SdbInstanceDialogs|ind|ind|ind|ind|1|0|SDB_INSTANCE_CREATE|ind|ind|ind|ind|0|0
File sapdb.inf does exist. Will use the commands in file sapdb.inf.
INFO       2009-03-12 16:52:06.544 [sixxcstepexecute.cpp:790]
Execute step sdb_init_instance_type of component |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_ADA_DB|ind|ind|ind|ind|6|0|SdbPreInstanceDialogs|ind|ind|ind|ind|4|0|SdbInstanceDialogs|ind|ind|ind|ind|1|0|SDB_INSTANCE_CREATE|ind|ind|ind|ind|0|0
INFO       2009-03-12 17:12:38.722 [sixxcstepexecute.cpp:790]
Execute step CheckDBUnicode of component |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_ADA_DB|ind|ind|ind|ind|6|0|Sdb_Schema_Dialogs|ind|ind|ind|ind|5|0|Sdb_Schema|ind|ind|ind|ind|1|0
INFO       2009-03-12 17:12:39.883 [sixxcstepexecute.cpp:790]
Execute step CreateDbSchema of component |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_ADA_DB|ind|ind|ind|ind|6|0|Sdb_Schema_Dialogs|ind|ind|ind|ind|5|0|Sdb_Schema|ind|ind|ind|ind|1|0
Also see log browser from the installation window............................
Please see below as it is geeting stuck at
component ><![CDATA[Run ABAP Reports]]></component><currentprogress current="105" total="216"/>
Mar 12, 2009 5:12:35 PM [Info]:                                                  com.sap.sdt.sapinst.rapi.connector.SAPinstConnector [Thread[SAPinstCommLink,5,main]]: Received: <?xml version="1.0" encoding="UTF-8"?><sapinstgui version="1.0"><dialog sid="diProgress" progress="true" windowtitle="SAPinst vtaneja2@skumar278-1: SAP NetWeaver 7.0 SR1 including Enhancement Package 1 > SAP Application Server ABAP > MaxDB > Central System > Central System"><title>Task Progress</title><description>Task is running</description><status><![CDATA[]]></status><component current="true"><![CDATA[Create users for SAP system]]></component><component current="true"><![CDATA[Install common system files]]></component><component current="true"><![CDATA[Unpack SAP archives]]></component><component current="true"><![CDATA[Install SAP Cryptographic component><component ><![CDATA[Perform MaxDB post-load activities]]></component><component ><![CDATA[Import MaxDB statistics]]></component><component ><![CDATA[Install central instance]]></component><component ><![CDATA[Start central services instance]]></component><component ><![CDATA[Start instance]]></component><component ><![CDATA[ABAP post installation activities]]></component><component ><![CDATA[Check DDIC password]]></component><component ><![CDATA[Run ABAP Reports]]></component><currentprogress current="99" total="216"/>
<button sid="btPREV" default="false" enabled="false" ><caption>< &Back</caption><action>ACTION_PREV</action><tooltiphelp><![CDATA[]]></tooltiphelp></button><button sid="btNEXT" enabled="false" ><caption>&Next</caption><action sendValuesBack="false">ACTION_NEXT</action><tooltiphelp></tooltiphelp></button></dialog></sapinstgui>
Mar 12, 2009 5:12:35 PM [Info]:                                                  com.sap.sdt.sapinst.rapi.connector.SAPinstConnector [Thread[SAPinstCommLink,5,main]]: Received: <?xml version="1.0" encoding="UTF-8"?><sapinstgui version="1.0"><dialog sid="diProgress" progress="true" windowtitle="SAPinst [Setup database connection for user SKUMAR278-1\nspadm]]></component><component ><![CDATA[Setup database connection for user skumar278-1\SAPServiceNSP]]></component><component ><![CDATA[Perform MaxDB pre-load activities]]></component><component ><![CDATA[Import ABAP]]></component><component ><![CDATA[Post load activities]]></component><component ><![CDATA[Perform MaxDB post-load activities]]></component><component ><![CDATA[Import MaxDB statistics]]></component><component ><![CDATA[Install central instance]]></component><component ><![CDATA[Start central services instance]]></component><component ><![CDATA[Start instance]]></component><component ><![CDATA[ABAP post installation activities]]></component><component ><![CDATA[Check DDIC password]]></component><component ><![CDATA[Run ABAP Reports]]></component><currentprogress current="100" total="216"/>
<button sid="btPREV" default="false" enabled="false" >
vtaneja2@skumar278-1: SAP NetWeaver 7.0 SR1 including Enhancement Package 1 > SAP Application Server ABAP > MaxDB > Central System > Central System"><title>Task Progress</title><description>Task is running</description><status><![CDATA[]]></status><component CDATA[Prepare database schema for ABAP]]></component><component current="true"><![CDATA[Create database schema]]></component><component ><![CDATA[Create sequence for the ABAP user]]></component><component ><![CDATA[Setup database connection for user SKUMAR278-1\nspadm]]></component><component ><![CDATA[Setup database connection for user skumar278-1\SAPServiceNSP]]></component><component ><![CDATA[Perform MaxDB pre-load activities]]></component><component ><![CDATA[Import ABAP]]></component><component ><![CDATA[Post load activities]]></component><component ><![CDATA[Perform MaxDB post-load activities]]></component><component ><![CDATA[Import MaxDB statistics]]></component><component ><![CDATA[Install central instance]]></component><component ><![CDATA[Start central services instance]]></component><component ><![CDATA[Start instance]]></component><component ><![CDATA[ABAP post installation activities]]></component><component ><![CDATA[Check DDIC password]]></component><component ><![CDATA[Run ABAP Reports]]></component><currentprogress current="104" total="216"/>
[Install central instance]]></component><component ><![CDATA[Start central services instance]]></component><component ><![CDATA[Start instance]]></component><component ><![CDATA[ABAP post installation activities]]></component><component ><![CDATA[Check DDIC password]]></component><component ><![CDATA[Run ABAP Reports]]></component><currentprogress current="105" total="216"/>
<button sid="btPREV" default="false" enabled="false" ><caption>< &Back</caption><action>ACTION_PREV</action><tooltiphelp><![CDATA[]]></tooltiphelp></button><button sid="btNEXT" enabled="false" ><caption>&Next</caption><action sendValuesBack="false">ACTION_NEXT</action><tooltiphelp></tooltiphelp></button></dialog></sapinstgui>
Mar 12, 2009 5:12:39 PM [Info]:                                                  com.sap.sdt.sapinst.rapi.connector.SAPinstConnector [Thread[SAPinstCommLink,5,main]]: Received: <?xml version="1.0" encoding="UTF-8"?><sapinstgui version="1.0"><update><updateitem><dialogstatus><![CDATA[ ]]></dialogstatus></updateitem></update></sapinstgui>
Mar 12, 2009 5:38:16 PM [Info]:                                                  com.sap.sdt.sapinst.rapi.connector.SAPinstConnector [Thread[AWT-EventQueue-0,6,main]]: Sent: <?xml version="1.0"?><sapinstlog severity="FLOW TRACE" filename="" version="1.0"/>
Mar 12, 2009 5:38:16 PM [Info]:                                                  com.sap.sdt.sapinst.rapi.connector.SAPinstConnector [Thread[SAPinstCommLink,5,main]]: Received: <?xml version="1.0" encoding="UTF-8"?><sapinstlog version="1.0" append="false" filename="C:\Program Files\sapinst_instdir\NW701\AS-ABAP\ADA\CENTRAL\sapinst_dev.log"/>
Mar 12, 2009 5:43:59 PM [Info]:                                                  com.sap.sdt.sapinst.rapi.connector.SAPinstConnector [Thread[AWT-EventQueue-0,6,main]]: Sent: <?xml version="1.0"?><sapinstlog logoff="true" filename="" version="1.0"/>
Mar 12, 2009 6:08:17 PM [Info]:                                                  com.sap.sdt.sapinst.rapi.connector.SAPinstConnector [Thread[AWT-EventQueue-0,6,main]]: Sent: <?xml version="1.0"?><sapinstlog logoff="true" filename="" version="1.0"/>
Mar 12, 2009 6:30:31 PM [Info]:                                                  com.sap.sdt.sapinst.rapi.connector.SAPinstConnector [Thread[AWT-EventQueue-0,6,main]]: Sent: <?xml version="1.0"?><sapinstlog logoff="true" filename="" version="1.0"/>
Thanks in advance
Vikas

Guess you are talking about sapinst.log file. Below are the last few lines after which it did not proceed
Do see the last step create DB schema....... The previos log was from sapinst_dev.log
Oliver I have a doubt could it be becuase of the host name.
The host name of my machine is "skumar278-1" with DNS domain name for SAP system "asiapac.globalcsc.net"
Could this be the reason for the problem i am facing i.e installation getting stuck at phase 13 Create DB schema.... Other than this I cannot see anything else which can go wrong.. Do have the DHCP server available..
The page file as per the ram settings i.e for 2 GB should be 3072 so I have set it to the same. Though
the prerequisite page shows
"For the selected services at least 7138 MB swap space are recommended. Current value: 2851 MB. (Updated 2005-06-24)"
Can this be the reason???
Also I just looked at the services file.. there are about about 4-5 different files with the name services .3 services.4 ... services.5 etc als there is no entry for port 3900 3600 & 8000.. .. do not know what to do... Please suggest..
INFO 2009-03-12 17:12:35.412
Execute step CheckDbExistence of component |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_ADA_DB|ind|ind|ind|ind|6|0|Sdb_Schema_Dialogs|ind|ind|ind|ind|5|0|Sdb_Schema|ind|ind|ind|ind|1|0
INFO 2009-03-12 17:12:35.726
Execute step check_dbm_dba_user_passwd of component |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_ADA_DB|ind|ind|ind|ind|6|0|Sdb_Schema_Dialogs|ind|ind|ind|ind|5|0|Sdb_Schema|ind|ind|ind|ind|1|0
INFO 2009-03-12 17:12:37.718
Execute step StartDb of component |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_ADA_DB|ind|ind|ind|ind|6|0|Sdb_Schema_Dialogs|ind|ind|ind|ind|5|0|Sdb_Schema|ind|ind|ind|ind|1|0
INFO 2009-03-12 17:12:38.722
Execute step CheckDBUnicode of component |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_ADA_DB|ind|ind|ind|ind|6|0|Sdb_Schema_Dialogs|ind|ind|ind|ind|5|0|Sdb_Schema|ind|ind|ind|ind|1|0
INFO 2009-03-12 17:12:39.883
Execute step CreateDbSchema of component |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_ADA_DB|ind|ind|ind|ind|6|0|Sdb_Schema_Dialogs|ind|ind|ind|ind|5|0|Sdb_Schema|ind|ind|ind|ind|1|0

Is db_name is the only parameter for creating database ? [Exper. on 32-bit]

Because of the discussion present in the following thread, I did few experiments and would you like to share with you. Hope it is a useful information for you guys.
Re: db_name & memory allocation
OS: Win XP SP2 or Windows 2000 <b>(32-bit)</b>
Oracle Version: Oracle 10gR2
System RAM: 1G
<b>Attempting to create the database CCC by specifying db_name parameter only</b>
C:\oracle\product\10.2.0\db_1\database>copy con initCCC.ora
db_name=CCC
^Z
        1 file(s) copied.
<b> Starting the service </b>
C:\oracle\product\10.2.0\db_1\database>oradim -new -sid CCC -startmode m
Instance created.
C:\oracle\product\10.2.0\db_1\database>set oracle_sid=CCC
C:\oracle\product\10.2.0\db_1\database>sqlplus "/as sysdba"
SQL*Plus: Release 10.2.0.1.0 - Production on Fri Apr 6 07:50:06 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to an idle instance.
SQL>
SQL>
SQL> startup nomount
ORACLE instance started.
Total System Global Area <b>113246208</b> bytes -- Default SGA size
Fixed Size                  1247588 bytes
Variable Size              58721948 bytes
Database Buffers           50331648 bytes
Redo Buffers                2945024 bytes
<b> On seeing dynamic components size, shared pool got
33m, large pool got 0m, java pool got 25m and buffer cache
got 50m. Please check the references for these default
values. </b>
SQL> select component,current_size from v$sga_dynamic_components;
COMPONENT                                                        CURRENT_SIZE
shared pool                                                          33554432
large pool                                                                  0
java pool                                                            25165824
streams pool                                                                0
DEFAULT buffer cache                                                 50331648
KEEP buffer cache                                                           0
RECYCLE buffer cache                                                        0
DEFAULT 2K buffer cache                                                     0
DEFAULT 4K buffer cache                                                     0
DEFAULT 8K buffer cache                                                     0
DEFAULT 16K buffer cache                                                    0
COMPONENT                                                        CURRENT_SIZE
DEFAULT 32K buffer cache                                                    0
ASM Buffer Cache                                                            0
13 rows selected.
<b>Total=109051904 </b>
SQL>
create database
ERROR at line 1:
ORA-01092: ORACLE instance terminated. Disconnection forced
<b>Errors in alert log file</b>
ORA-00604: error occurred at recursive SQL level 1
<b>ORA-04031: unable to allocate 40 bytes of shared memory ("shared pool","create unique index
i_proxy_...","sql area","kksol : kksnsg")
</b>
Error 1519 happened during db open, shutting down database
USER: terminating instance due to error 1519
<b>It was thought that shared_pool memory area is not
sufficient. Then thought to know how oracle will behave on
setting sga_target parameter.</b>
<b>initCCC.ora</b>
db_name=CCC
sga_target=113m
SQL> startup nomount
ORACLE instance started.
Total System Global Area <b>121634816 bytes -- Got around 121m </b>
Fixed Size                  1247636 bytes
Variable Size              54527596 bytes
Database Buffers           62914560 bytes
Redo Buffers                2945024 bytes
<b>Now create database statement got success here.
Instance got few extra Mbs of memory and oracle can create
the database.</b>
<b>Then it was thought that, why to give 121Mb even. Let exactly 113246208 bytes be devoted to the instance.</b>
initCCC.ora
db_name=CCC
sga_target=113246208 -- providing exact number of bytes as obtained in default case
SQL> startup nomount
ORACLE instance started.
Total System Global Area 113246208 bytes
Fixed Size                  1247588 bytes
Variable Size              54527644 bytes
Database Buffers           54525952 bytes
Redo Buffers                2945024 bytes
SQL>
<b> Now create database statement got success here as
well. Because of sga_target, automatic shared memory
management enabled and instance was taking care of buffer
cache, shared pool, large pool, java pool and
streams_pool. In this case shared pool got 46m (greater
than default case value). Java pool and Large pool got 4
mb each and buffer cache got 54m. </b>
SQL> select component,current_size
2 from v$sga_dynamic_components;
COMPONENT                                                        CURRENT_SIZE
shared pool                                                          46137344
large pool                                                            4194304
java pool                                                             4194304
streams pool                                                                0
DEFAULT buffer cache                                                 54525952
KEEP buffer cache                                                           0
RECYCLE buffer cache                                                        0
DEFAULT 2K buffer cache                                                     0
DEFAULT 4K buffer cache                                                     0
DEFAULT 8K buffer cache                                                     0
DEFAULT 16K buffer cache                                                    0
COMPONENT                                                        CURRENT_SIZE
DEFAULT 32K buffer cache                                                    0
ASM Buffer Cache                                                            0
13 rows selected.
<b>Total=109051904 </b>
SQL>
By providing 113246208 bytes (as in default case) of
memory to SGA by setting sga_target value, Oracle gave
extra memory to shared_pool and buffer cache than in case
of default, thus helping create database statement to get
pass. Oracle always recommends to use automatic shared
memory management by setting sga_target parameter value.
Hope this experiment provides few clues about automatic
shared memory management feature of Oracle 10g. This case
was conducted on 32-bit Oracle. It is quite possible that
create database statement might get success in 64-bit
Platform as by default Oracle will provide 84 Mb to Shared
pool. But to confirm, it has to be experimented.
References:
Shared pool
http://download-uk.oracle.com/docs/cd/B19306_01/server.102/b14237/initparams196.htm#sthref804
Large Pool
http://download-uk.oracle.com/docs/cd/B19306_01/server.102/b14237/initparams090.htm#sthref377
Java Pool
http://download-uk.oracle.com/docs/cd/B19306_01/server.102/b14237/initparams087.htm#sthref364
Buffer Cache
http://download-uk.oracle.com/docs/cd/B19306_01/server.102/b14237/initparams043.htm#sthref185

Hi,
Good Work Mohammed !!!
Regards
Taj

Error on Create Database command for Oracle 9i on Red Hat 9

Error on Create Database command
CREATE DATABASE ora9i
LOGFILE
GROUP 1 ('$HOME/ORADATA/log_01_01_ora9i.rdo') SIZE 10M,
GROUP 2 ('$HOME/ORADATA/log_02_01_ora9i.rdo') SIZE 10M
DATAFILE '$HOME/ORADATA/system_01_ora9i.dbf' SIZE 100M
AUTOEXTEND ON NEXT 50M MAXSIZE 150M
DEFAULT TEMPORARY TABLESPACE temp
TEMPFILE '$HOME/ORADATA/temp_01_ora9i.dbf' SIZE 15M
AUTOEXTEND ON NEXT 5M MAXSIZE 30M
CHARACTER SET WE81SO8859P1
NATIONAL CHARACTER SET AL16UTF16
CREATE DATABASE ora9i
ERROR at line 1:
ORA-01092:ORACLE instance terminated. Disconnection forced.
initora9i.ora file contents :
background_dump_dest=$HOME/ADMIN/BDUMP
core_dump_dest=$HOME/ADMIN/CDUMP
db_name=ora9i
db_files= 80
db_file_multiblock_read_count=8
db_block_buffers=100
shared_pool_size = 3500000
log_checkpoint_interval = 10000
processes=50
parallel_max_servers=5
log_buffer = 32768
max_dump_file_size = 10240
global_name = TRUE
control_files=$HOME/ORADATA/ctrl01.ctl
undo_management=AUTO
user_dump_dest=$HOME/ADMIN/UDUMP
-------------------------------------------------

Pleae include REUSE keyword at the end of each file location as shown below...
CREATE DATABASE ora9i
LOGFILE
GROUP 1 ('$HOME/ORADATA/log_01_01_ora9i.rdo') SIZE 10M REUSE,
GROUP 2 ('$HOME/ORADATA/log_02_01_ora9i.rdo') SIZE 10M REUSE
DATAFILE '$HOME/ORADATA/system_01_ora9i.dbf' SIZE 100M REUSE
AUTOEXTEND ON NEXT 50M MAXSIZE 150M
DEFAULT TEMPORARY TABLESPACE temp
TEMPFILE '$HOME/ORADATA/temp_01_ora9i.dbf' SIZE 15M REUSE
AUTOEXTEND ON NEXT 5M MAXSIZE 30M
CHARACTER SET WE81SO8859P1
NATIONAL CHARACTER SET AL16UTF16

Creating database in unix

Similar Messages

Maybe you are looking for