Creating Hierarchy on Master Data.

Hi All,
Please suggest me in this regard.
I have a master data Object which has already been loaded with data.
So, Can I create a hierarchy on this master data?
If "Yes", then how to do it??
Thanks in advance.
Anjum.

Hi nasarat,
check these links
http://help.sap.com/saphelp_bw33/helpdata/en/fa/e92637c2cbf357e10000009b38f936/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/fa/e92637c2cbf357e10000009b38f936/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/b0/ab8e3cb4340b14e10000000a114084/content.htm
http://help.sap.com/saphelp_bw33/helpdata/en/c8/e92637c2cbf357e10000009b38f936/content.htm
Regards
sridath

Similar Messages

What bapi or FM can create/change vendor master data?

We want to do a rfc to create/change vendor master data .If use BDC,the change function is very very complex,but i can't find any BAPI/FM in sap!

>
Keshav.T wrote:
> Hi,
>
> just some more addition to vinodh's reply . the actual method you must is maintain_bapi of class vmd_ei_api
Hi Keshav - you should have noticed vinodh's reply came from something your wrote earlier this year: Search BAPI to create Vendor in ECC and from an extenal application

BAPI/function module to create/update vendor master data

Hi
We are on ECC 50 and have a need to update vendor master data through a programatic interface ( non-dialog ) with ABAP. What is a good function module that can be used to create/update vendor master data - I looked at BAPI_VENDOR_CREATE and did not find any input interfaces that can be passed to this BAPI.
Previous experiences with the right BAPI for this purpose that can be shared is appreciated. <REMOVED BY MODERATOR>
Edited by: Alvaro Tejada Galindo on Feb 26, 2008 5:58 PM

Hi Kiran,
If you want to load the vendor data into sap its better to go with LSMW batch input program.
object 0040
method 0001
program name RFBIKR00
Program type B
this would be a good choice. Recently i did the same.

Create a material master data.

Hello,
this code doesn't create a material master data.
Does it make sense to put additional views?
Thank you in advance.
DATA: w_bapimathead TYPE bapimathead.
DATA: i_bapi_makt TYPE TABLE OF bapi_makt,
        w_bapi_makt TYPE bapi_makt.
w_bapimathead-basic_view = 'X'.
w_bapimathead-material = 'AAABBBCCCDDD'.
CLEAR w_bapi_makt.
w_bapi_makt-langu = 'EN'.
w_bapi_makt-matl_desc = 'Screwdriver'.
APPEND w_bapi_makt TO i_bapi_makt.
CALL FUNCTION 'BAPI_MATERIAL_SAVEDATA'
     EXPORTING
          headdata            = w_bapimathead
     TABLES
          materialdescription = i_bapi_makt.
          write:/.

Ilhan,
We already take the time to reply to YOU here :
create material master data
Erwan

End User Doc. Create / Change Customer Master Data

< MODERATOR: Message locked. Please read the [Rules of Engagement|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement] before posting next time. >
Hi Experts,
I would appreciate, if anyone of you could forward me the end user documents for creating & changing customer master data.
sonicasmailbox at rediff
Points will be assigned.
Regards
Sonica

Hi
Refer to help.sap.com for creating customer master data.
Copy this to word document and it will be become user manual.
http://help.sap.com/saphelp_ides/helpdata/en/47/ef8c64124811d2806f0000e8a495b3/content.htm
Additionally refer to this weblink
http://web.mit.edu/cao/www/AR/ar1/ar_FD01.htm - This if for FICO only.
Changing customer master record.
Use T.Code XD02.
Enter Customer No,Company code,Sales Org, Distribution channel and division and press Enter or
Enter Customer no,company code and click on customer's sales area, you will see Sales Org, Distribution channel and division,select the Sales org,Sales Org, Distribution channel and division and press enter.
You can make necessary changes to customer master
Please let me know if you need more information.
Asssign points if useful.
Regards
Sridhar M

Hierarchy for Master Data Load from BW

Hi All
I'm loading Master data from BW infoobject 0Customer. There is no Hierarchy maintained for it in BW.
Rather than creating hierarchy manually in BPC, I want to include mapping in transformation/conversion file which should roll master data records coming from BW to ALL_CUSTOMERS (member manually maintained in BPC). ALL_CUSTOMERS will be parent node for the hierarchy in BPC. No other levels of hierarchy is required. All the data should have one parent.
Something like PARENT=*STR(ALL_CUSTOMERS)
Please share your ideas? Help is very much appreciated.
Thanks.

Hi Asif
If you are laoding master data from BW infoobject, you will not be able to load /specify any value for ParentH1/hierarchy node as BW /BPC does not allow that.
An option would be to
1) load hierarchy from a flat file or
2) to maintain hierarchy in BW amd load into BPC the normal way
Regards
Surabhi

How to create time dependant master data table in R/3?

Hi gurus,
I am new to BW.I try to execute the 'Time dependant Attribute' into BW.in my scenario my source system must give me the data like "salesrep ID,Manager ID,Date to,Date from,Sales region". I like to know how to define this master data in SAP R/3(Source system)?. Give me the steps to create master data table in R/3.
Manager may change periodically.even i need to maintain all the changes in R/3.
Thanks & Regards,
Bharath

built-in type method means.,
there is no need to create data element and domain objects seperately for each and every field of the table which ever you are creating, system will implicitly fix the size based on the data type you selected....

Iwant to create Report using master data

i have created master data characteristic with attributes,is there is possible to create the info provider with the characteristic and attributes with transaction data and i want to create report in that cube.

Hi,
First create a infoobject as infoprovider, on which you want to create reports. Then also create cube for transction data. Then Create a multiprovider and include both master data and cube. Try to create a report on multiprovider based on requirement.
Hope this helps out
thanks
PT

How to find the Acoount Group used while creating the customer master data.

Hi,
I am in xd03 mode displaying the customer master data. I want to know the ACCOUNT GROUP which was used while create this customer. How can i find it? Can any one tell me the process to find the account group?
Thanks in advance.

Enter the customer number in XD03 and click enter. Once the screen displays the customer name go to dropdown extras--> Administrative Data. This will give you the account group and the creation date of the customer. The same is stored in KNA1- KTOKD.
Thanks
Indranil

How to delete MRP view data after create in Material master data ?

Hi all ,
After user create a useless MRP view data in Material master data , how to remove it ?

Hi
Material master once created cannot be deleted.Only thing u can do is to mark it for deletion
Go to Logistics > Materials management > Material master > Material > Flag for deletion > Immediately.
Give the necessary data that is needed for the view you want to delete.
Press and flag the view you want to delete.
Now the view is flagged for deletion. This means that it's use is limited and it will be cleaned up or really deleted at the next clean up of the system.
regards
Anand

Is it possible to create isu technical master data using EMIGALL

Hi exports,
I ma new to emigall ,but i need to upload 1000's of master data as well as technical master data .
kindly any body provide me related isu master data upload documents other wise sugesset me step by step guidelines regarding EMIGALL for upload technical master data ..
kindly send me link if have any EMIGALL screens doc..
Thanks in advance..
Moderator note - thread locked, no research done

Post Author: swalker
CA Forum: General
yangster thanks for the quick reply. I am not really sure about combining reports, so I looked into what you said. I tried to create a shared variable on the field that I need to share but that field is a running total and I get an error when I try to run the report "This field cannot be used becaus eit must be evaluated later." So I am not sure what to do now. Is there a work around for this? Thanks for any help.

Unable to create a new master data type

I am trying to set up a simple demo model on an On Premise S&OP on HANA system (Release 3).
I have created and saved some master data attributes.
But when I try and set up a new master data type, the system does not show any available master data attributes to select (even though 'All attributes' is selected in the dropdown), so I cannot save the new master data type.
Any suggestions regarding this problem are welcome...

Hello David,
We are having S&OP 3.0 SP1 patch 1 on premise with HANA version 1.00.69.385057. We have old golden demo files imported.
Could you please let us know...
1) is it right combination..?
2) Is it necessary to upgrade to patch 2.
3) in case, we upgrade to patch 2, do we need to import golden demo file again for patch 2
4) Do we have any release note for patch 2.
Your quick response is highly appreciated. Thanks!!
Regards,
Dinesh Goyal

Create/Cahnge Cust Master data into pdf?

Hi All,
I've a requirement that when the user enters/creates/changes customer details and when he saves it..this then should create a pdf containing all master data and should be FTPed to another secure FTP site..
please give me suggestions on how to go about this?
Regards,
RS.

Hi,
Could you please give more details on the approach to achieve this and the place where I can write the event etc..?
Regards,
Raghu.

Segment field missing while creating profit center master data in SAP ECC6.

Hi,
I am working on ECC6.0 IDES. When I create profit center master I dont see the field for Segment on the profit center master.
Is there any setting which needs to be activated to see the the field for Segment on profit center master.
Regards,
Raghav

HI Raghavendra,
Check if the segmentation scenario is available for general ledger at the following path
Financial Accounting (New)>Ledgers> Fields > Customer Fields > Display Scenarios for General Ledger Accounting
Regards
Sach!n
Edited by: Sachin Bhutani on Mar 26, 2009 11:23 AM

Is there a FM to create GL account master data ?

Instead of the BI based report RFBISA00 I would prefere to use a FM or BAPI.
Does anybody know such a FM?
Thank in advance

hi Oleg / expert
I tried to use FM GL_ACCT_MASTER_SAVE to do g/l account master mass upload, but error messag return:
Type :E ID:FH Number 502 "Internal error: Import of table SKA1 not possible". Is there any step I miss ?
SAP: ECC6.0
GUI: 710 Patch Level 0
Here is my program coding:
loop at t_importlist into wa_importlist.
    doc_account_coa-keyy-ktopl    = wa_importlist-ktopl.
    doc_account_coa-keyy-saknr    = wa_importlist-saknr.
    doc_account_coa-data-ktoks    = wa_importlist-ktoks.
    doc_account_coa-data-xbilk    = wa_importlist-xbilk.
    doc_account_coa-action        = 'I'.
    append doc_account_coa.
    clear doc_account_coa.
    doc_account_names-keyy-ktopl = wa_importlist-ktopl.
    doc_account_names-keyy-saknr = wa_importlist-saknr.
    doc_account_names-keyy-spras = 'E'.
    doc_account_names-data-txt20 = wa_importlist-txt20_en.
    doc_account_names-data-txt50 = wa_importlist-txt50_en.
    doc_account_names-action      = 'I'.
    append doc_account_names.
    clear doc_account_names.
    call function 'GL_ACCT_MASTER_SAVE'
      TABLES
        account_names = doc_account_names
       account_ccodes = doc_account_ccodes*
        return         = doc_return
      CHANGING
        account_coa    = doc_account_coa.
    read table doc_return with key type = 'E'.
    if sy-subrc = 0.
      loop at doc_return where type = 'E'.
      endloop.
    else.
      call function 'BAPI_TRANSACTION_COMMIT'
        EXPORTING
          wait = 'X'.
      read table doc_return with key type = 'S'.
    endif.
endloop.
Thanks

Creating Hierarchy on Master Data.

Similar Messages

Maybe you are looking for