Creating IP which doesn't link RTL / uses netlist

Hi,
I created IP for my project in Vivado and it contains the source code. I am looking for a way of creating IP where it is just a netlist and doesn't have the source code linked (so I can give it to third parties to use without them knowing the source). I managed to do this in ISE and create NGC files but I don't know how in Vivado. Can anyone help me on this?
I am using Vivado 2015.1
Thanks,
Tim

Deepika,
Thanks for the reply. It is good to know. In most cases I will give them the DCP just as I gave the NGC for Spartan6 designs.
One scenario I wish to do is the following:
IP that i compile into DCP is a standalone block with a custom interface.
Wish to connect it to a simple AXI peripheral which will drive my custom interface from registers.
This is then used to drive my IP from Zynq/Microblaze.
I have done this successfully for Spartan6 with the EDK flow now I wish to do it for 7series in the Vivado flow.
How can I do this without providing the source code to the original IP? (I don't mind providing source code for the peripheral, just not the IP underneath)
Thanks,
Tim

Similar Messages

How to create a subreport link programmaticly using java RAS sdk

Hi,
I want to create subreport link for couple of main report parameters programmaticly using RAS sdk.
Main report has Param1 and Param2. I need to link these parameters to sub-report which doesn't have any parameters, so I can pass the parameters value just once when running the report and consume it's value in the sub-report.
Below is the code I tried but I get "Invalid field name"error when I try to save the main report.
ISubreportClientDocument subReportDoc = subReportCntrl
.getSubreport(subReports.getString(i));
SubreportLinks srLinks = subReportCntrl.getSubreportLinks(subReports.getString(i));
SubreportLink subRptLink1 = new SubreportLink();
Fields paramFields = reportClientDoc.getDataDefinition().getParameterFields();
subRptLink1.setMainReportFieldName(paramFields.get(0).toString());
subRptLink1.setSubreportFieldName(paramFields.get(0).toString());
SubreportLink subRptLink2 = new SubreportLink();
subRptLink2.setMainReportFieldName(paramFields.get(1).toString());
subRptLink2.setSubreportFieldName(paramFields.get(1).toString());
srLinks.add(subRptLink1);
srLinks.add(subRptLink2);
subReportCntrl.setSubreportLinks(subReports.getString(i), srLinks);
Thanks,

Hi,
I want to create subreport link for couple of main report parameters programmaticly using RAS sdk.
Main report has Param1 and Param2. I need to link these parameters to sub-report which doesn't have any parameters, so I can pass the parameters value just once when running the report and consume it's value in the sub-report.
Below is the code I tried but I get "Invalid field name"error when I try to save the main report.
ISubreportClientDocument subReportDoc = subReportCntrl
.getSubreport(subReports.getString(i));
SubreportLinks srLinks = subReportCntrl.getSubreportLinks(subReports.getString(i));
SubreportLink subRptLink1 = new SubreportLink();
Fields paramFields = reportClientDoc.getDataDefinition().getParameterFields();
subRptLink1.setMainReportFieldName(paramFields.get(0).toString());
subRptLink1.setSubreportFieldName(paramFields.get(0).toString());
SubreportLink subRptLink2 = new SubreportLink();
subRptLink2.setMainReportFieldName(paramFields.get(1).toString());
subRptLink2.setSubreportFieldName(paramFields.get(1).toString());
srLinks.add(subRptLink1);
srLinks.add(subRptLink2);
subReportCntrl.setSubreportLinks(subReports.getString(i), srLinks);
Thanks,

Can I create a pdf with clickable links which open new pdfs?

Hi,
My client now wants me to create pdf with links to open new pdfs (in an offline mode). He wants to put all the content onto memory sticks to hand out at a conference.
I have suggested the alternative of links which redirect to other pages within the same pdf, but if I could create one which open whole new pages or documents this would be really smart.
Many thanks,
Sam

When you create the links, use "Go to a page view" type, as opposed to "Open a file". This allows you to create links that will open another PDF to a particular page and view (zoom and position).

Which function module could be used to create ACTIONs in transaction

HI,
when we open a transaction use TCODE CRMD_ORDER, there is always a tab named 'Action'. And Which function module could be used to create a new action?
THS!

Hi Gang,
I am not sure about the Function Module but ya if you access through this link i belive you will be able to create ACTION for your Transaction.
Link:[Action|http://help.sap.com/saphelp_crm70/helpdata/en/54/238e39e1ba3541e10000000a11402f/frameset.htm].
Let me know in case you need any more help.
Vijayata

IPad2 and a new MacBook running Lion, Both Devices use the same Apple ID which is a Hotmail eMail id. Can I create a new iCloud eMail Id and use iCloud eMail and continue to use my Hotmail Id for my Apple Id and use it for iTunes, iCloud

I have an iPad2 and a new MacBook running Mountain Lion. Both Devices use the same Apple ID which is a Hotmail eMail id. Can I create a new iCloud eMail Id and use iCloud eMail and continue to use my current Hotmail Id for my Apple Id for iTunes, iCloud.
Note, I will use both Hotmail and iCloud eMail.

Welcome to the Apple Community.
In order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, then add it back using your updated details. (Settings > iCloud, scroll down and hit "Delete Account")

When trying to update Apps in iTunes on my computer my old Apple ID appears, which is no longer in use and has no password; even when I try to create a password for this Old ID, Apple won't let me. When I go into see my Account settings My new Apple ID /

When trying to update Apps in iTunes on my computer my old Apple ID appears, which is no longer in use and has no password; even when I try to create a password for this Old ID, Apple won't let me. When I go into see my Account settings My new Apple ID / iTunes ID are listed and the passwords are correct obviously so why can't I update my Apps? Why does my Old apple ID keep appearing and how can I get Apple to change this?

I have the same problem - it is maddening. I rely on this iPad for work so this is not just an annoyance! The above solutions of changing the appleid on the device or on the website do not work.
The old email address no longer exists - I haven't used it in a year probably and I no longer have the account. I logged into the appleid website and there is no trace of the old email address so there is nothing that can be deleted or changed there. On the iPad there is no trace of the old email address so nothing can be deleted there either. I have updated the iPad software and the same problem comes right back. Every 2 seconds I am asked to log in using the old non-existent email. The device is currently useless.
The only recent change to anything was the addition of an Apple TV device, which was set up using the correct login and password.
Does anyone have any ideas? The iPad has been backed up to the iCloud so presumably it now won't recognize the current iCloud account? So restoring may notbe an option?

When I right click on a link "Open link in new tab" since a few days, it "jumps over" the tab to the right and opens in the tab next to that. How can I change this back to opening in the tab next to the page from which I opened as it used to be?

When I right click on a link "Open link in new tab" since a few days, it "jumps over" the tab to the right and opens in the tab next to that. How can I change this back to opening in the tab next to the page from which I opened as it used to be?

Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
* [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

I have a file that was created in FH 11 and I am using same version.Originator opens file and everything is fine and also earlier version opens it fine.when I open it the links shift 1/8" up and left.Has anybody had this happen to them

I have a file that was created in FH 11 and I am using same version.Originator opens this file and everything is fine and also an earlier version opens it fine.When I open it it shifts the links 1/8" up and to the left.Has anybody ever had this happen to them?

What file format(s) are the "links"?
If raster images, do they contain clipping paths or transparency?
What is your platform and OS?
Were the FH documents created on the same platform (Mac or PC) as the one you are currently using?
Were the linked files created on the same platform (Mac or PC) as the one you are currently using?
Can you reproduce the problem with a newly created document and the same linked images?
There was once an issue with transparent 1-bit TIFF images shifting, but I believe that was in a previous version of FH.

Which BUs Object should I use for archiving and linking to SalesDocuments

Hi,
I want to archive documents and link them to SalesDocuments, but I don't know which BUsiness Object I should use. Special Ones like BUS2030, BUS2031,... or the general Type VBAK. If I use VBAK I have the problem, that when I archive manually all with VBAK linked documenttypes are proposed, so that I can't control, which documents are allowed to be linked with for instance CustomerQuotation or SalesOrder.

Hello Marc,
For Sales Order user object type as BUS2032
Customer Quotation- BUS2031
Customer Inquiry - BUS2030
BUS2033          Customer complaint order
BUS2034          Customer Contract
BUS2035          Customer scheduling agreement
BUS2051          Customer outline agreement
BUS2094          Credit memo request
Hope this will answer your question.
-Thanks,
Ajay

Which digital certificate (SSL) is used when a proxy client is created

Dears,
Could someone please guide if there are more than one digital certificate (SSL) added to the SAP system, and we create a proxy client using the 'URL' (https://....) option, than which digital certificate will be used in the check done.
Thanks.
Reda

The names that go on the certificate must match the names you planned when you did the CAS namespace design.
Some details here:http://blogs.technet.com/b/exchange/archive/2014/02/28/namespace-planning-in-exchange-2013.aspx
So in your case if the cert does not match the name, then this will prompt users with errors.   They need to match. As long as all your internal devices trust the issuer of the internal CA then you can use that.   Installing an
enterprise CA will automatically publish it's root CA public cert into AD so it works easily.
Cheers,
Rhoderick
Microsoft Senior Exchange PFE
Blog:
http://blogs.technet.com/rmilne
Twitter:   LinkedIn:
  Facebook:
  XING:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Which user exit can be use before production order creating?

which user exit can be use before production order creating?
i want to check AFPO data,then show error message before production order creating.
1.i try to use PPCO0001( enhancement when saving the order) to check AFPO data, then show some error message,sap system will generate a abap down error.
2.i try to use PPCO0007(Exit when saving production order),
i can show error message,but i can't check AFPO's data.

Hi,
You can access AFPOD structure using field symbols.
Try below mentioned code in routing:
constants: c_afpod TYPE char30 VALUE '(SAPLCOKO1)AFPOD' .
FIELD-SYMBOLS: <fs_afpod> TYPE ANY .
data: wa_afpod TYPE afpod.
ASSIGN (c_afpod) TO <fs_afpod>.
wa_afpod = <fs_afpod>.
Then later you can use wa_afpod in exit PPCO0007. Hope this will work for you.
Sumit

I'm trying to purchase Guy Sebastian's (Australia) albums, but I keep getting a link "view in iTunes" which doesn't respond. How can I purchase music that's a few years old?

I'm trying to purchase Guy Sebastian's (Australia) albums:
"Beautiful Life"
"Closer To The Sun"
"Just As I Am"
"Twenty Ten"
, but I keep getting a link "view in iTunes" which doesn't respond so I can purchase the items thru iTunes.
How can I purchase music that's a few years old?

Guy's older albums have been on other countries' Itunes in the past. I don't know why they come and go. Guy keeps promising to spend more time overseas, releasing and promoting his music. I'm sure they'll all become available again then. You could import CDs, of course, but that becomes expensive. Online, Sanity and JBHiFi in Australia will mail overseas.

Hey ! At the moment I am creating a eBook, which should contain links to iTunes. Does anyone know, if it is necesary to join the affiliate program for this ?? Cause I don`t want to ;-)

Hey ! At the moment I am creating a eBook, which should contain links to iTunes.
Does anyone know, if it is necessary to join the affiliate program for this ?? Cause I don`t want to ;-)

Hi Bruce,
I'm getting closer. I actually tried a variety of expressions, such as "== null" and yours, but the problem persists.
I am settling on the following, but there is a hangup related to the field that is being looked at for the condition that I will explain in a minute. Here's the script:
if
(ViolationsTable.ViolCorrSection.ViolationsText.DebitVal.isNull || ViolationsTable.ViolCorrSection.ViolationsText.DebitVal.rawValue.length == 0)
ViolationsTable.ViolCorrSection.instanceManager.removeInstance(parent.parent.index);
else
app.alert ("Warning Statement);
ViolationsTable.ViolCorrSection.instanceManager.removeInstance(parent.parent.index);
What happens is that, no matter which row in my table I'm in when I click the remove instance button, the script is always looking to the DebitVal field in the first row of the table. So, if the first row is empty, the message box won't appear for the removal of any row in my table. If the first row has a value in DebitVal, then the deletion of any row in the table will trigger the message box.
I need a way to specify the script to look at the DebitVal field in the row that I am clicking in, without messing up the remove instance command.
Ideas?
Dave

Which BW Variable to be used for date when creating service in portal

Hi,
Can any one please let me know which BW variable is to be used for date(range) when creating a portal service for searching based on dates.
Thanks
Abhai
Message was edited by:
Abhai

Hi Arun,
its just a portal service which would be called when searching a document created on a particular date or betwwen a range of date.so what i require is which BW variable to be used when handling range.As for variable technical name we use VAR_NAME_I and for single value variable we VAR_VALUE_EXT_I
in the similar manner i want BW variable to be used for range of values.
Thanks
Abhai

How to handle RunTime Faults which doesn't list under System Faults?

Hi,
I have a doubt regarding runtime faults in BPEL 1.1.In BPEL 1.1 some of the run time faults are categorised as system faults.So we can handle those run time faults
using the faultname or namespace(http://schemas.oracle.com/bpel/extension) of system fault itself.But 'SublanguageExecutionFault' is a run time fault which doesn't list under system faults.
So what namespace it belongs to?Can we use the same namespace of system fault for this kind of runtime faults ?
Are any other runtime faults existing which don't have the same namespace of sytem faults?So how can we identify and handle those run time faults?

You can create a role menu as remote enabled remote menu.
The authority checks will happen on the remote side, also against objects which don't exist in the calling system as the music is on the other side.
On the RFC client system side, you only need the parameter transaction to start the remote transaction in the remote system.
See the documentation on SYST function module ABAP4_CALL_TRANSACTION.
This is however a rather antiquated technology... it is more popular to use a SAP Portal or webdynpro applications for this sort of thing (the user does not notice the difference) or later versions of such integration such as Fiori UIs or imbedded links within the Business Client.
I don't want to lean out the window too far, but the buggy phase of these new things is approaching an end and they are usable if you are on newer releases. Then you can pool the menu and use APIs for navigation and no more irritating S_TCODE checks.
Cheers,
Julius

Creating IP which doesn't link RTL / uses netlist

Similar Messages

Maybe you are looking for