Creating Link ID from SSM 7.0 to BI

Hi,
I am trying to create a link id from SSM 7.0 to BI but i am not getting "SAP NW BI RFC" in database type to create link id.
please suggest what to do?
Thanks
Anuj

Anuj,
In order to use SAP OLEDB connection type for the LinkID, there are a few dll files that you need to make sure to have on the latest version. I'm not sure right now which ones they are, but anyway that is one of the reasons SAP now only supports BAPI as the connection mode to BW. It is not dependent on any dlls and so it is less likely you run into errors because of anything that is unrelated to the product.
I would therefore advise you to establish the connection to BW using BAPI. Perhaps the following note can help you:
[Note 1297726 - Enabling BAPI connections within Application Server|https://service.sap.com/sap/support/notes/0001297726]
Best regards!
Ricardo Vieira

Similar Messages

Linked Server from SQL 2008 to Connect to 2012 read only replica never works

I have two Production Database Servers
1. SQLServer2008 (2 Nodes Cluster)
2. SQLServer2012 with 2 read only replica (3 Nodes Cluster)
I would like to draw a line here, We have routing table and URL working perfectly fine.
We have tested LINKED Server from 2012 Box to production Server by Specifying APPLICATIONINTENT = ReadOnly; it works perfectly fine, the routing is being used.
When we create linked server from SQL Server 2008 Box (Please note we have installed SQL Server 2012 Client tools on this box and Restarted the Servers) using the below script
USE [master]
EXEC master.dbo.sp_dropserver @server=N'AGL1', @droplogins='droplogins'
GO
EXEC master.dbo.sp_addlinkedserver @server = N'AGL1'
,@datasrc='AGL1'
,@provider='SQLNCLI11'
,@provstr='ApplicationIntent=ReadOnly;Database=AdventureWorks2012'
Linked Server is created, Now when I run the Query
exec ('select @@servername') at AGL1
It always brings the Primary READ/WRITE node name only, after lots of research I found that, this linked Server is always using SQL Native Client 10.0 only, even after creating Linked Server using SNC 11, That is the reason it is not going to routing
table. Its always connecting to Primary node.
Below is the way I found it, on 2012 Production Server I executed below Query
SELECT session_id, protocol_type, driver_version =
CASE SUBSTRING(CAST(protocol_version AS BINARY(4)), 1,1)
WHEN 0x70 THEN 'SQL Server 7.0'
WHEN 0x71 THEN 'SQL Server 2000'
WHEN 0x72 THEN 'SQL Server 2005'
WHEN 0x73 THEN 'SQL Server 2008'
ELSE 'SQL Server 2012'
END,client_net_address ,client_tcp_port,local_tcp_port ,T.text
FROM sys.dm_exec_connections
CROSS APPLY sys.dm_exec_sql_text(most_recent_sql_handle) AS T
The help is taken from msdn (Link Provided below) for the above Query
https://msdn.microsoft.com/en-us/library/dd339982.aspx
and I found it always uses SQL Server 2008 SNC.
My Question is, is there a way to force SQL Server to use SQL Server Native Client 11.
Has anyone tried this setup?
Thank you in advance.

Unfortunately no, there is no other way of forcing it without restart. The SQL Server stack has no idea of the existing Native Client as it booted prior its installation. And you cannot force "DLL reload" without proper service restart.
Ivan Donev MCT and MCSE Data Platform

Is there a way to create a "Horizontal Links List" from a query?

Hi,
Is there a way to create a "Horizontal Links List" from a query?
I want to display file names that I have uploaded as links to a display page.
I don't know how to create my own template yet as I've read... I saw Jes had posted this idea...
Thanks, Bill

Yes, that is great Chris!
Thanks for the site....
Once I dynamically create the HTML for the list how do I feed it into the page?
as an item? Can I access an HTML region body dynamically?
Thanks, Bill

"Create links from URLs" preference no longer working in sticky notes

I work with reading other people's sticky notes in Adobe Acrobat X Pro (now version 10.1.1). When they wrote URLs in the sticky notes it used to recognize them as links; now they're just plain text. My Preferences > General > "Create links from URLs" option is checked ON. I aso tried View > Tools > Document Processing > "create Links from URLs" and it added two links but only outside of the sticky notes. I am on Windows 7 Professional 64-bit. Thanks.

AFAIK, URLs inside annotations were never converted into actual links. I'm not even sure it's technically possible to do so.
It might have happened if the annotations were flattened and the text in them became a part of the static text of the PDF. Then the URLs in it could have been converted into "live" links, but not before.

11g Release 2 Installation: Error in creating link from ../bin/javaws

While installing Oracle 11g Release 11.2.0.2 on a solaris 10 box, the installation fails on the copy phase with message below:
INFO: creating link '../bin/javaws' for '/app11g/oracle/product/11.2.0/dbhome_1/jdk/jre/javaws/javaws'
INFO: creating link '../bin/javaws' for '/app11g/oracle/product/11.2.0/dbhome_1/jdk/jre/javaws/javaws'
INFO: Exception thrown from action: createLink
Exception Name: LinkException
Exception String: Error in creating link from ../bin/javaws to /app11g/oracle/product/11.2.0/dbhome_1/jdk/jre/javaws/javaws
Exception Severity: 1
INFO: Exception handling set to prompt user with options to Retry Ignore

Thank you Srini. During the prerequisite check was successfull. However here are the last 100 lines of the log:
oui/bin/runInstaller.var oui/bin/runSSHSetup.sh oui/bin/addLangs.sh oui/bin/runConfig.sh oui/bin/attachHome.sh oui/bin/detachHome.sh
INFO: chmod 0664 oui/jlib/OraCheckPoint.jar oui/jlib/OraInstaller.jar oui/jlib/OraInstallerNet.jar oui/jlib/OraPrereq.jar oui/jlib/OraPrereqChecks.jar oui/jlib/emCfg.jar oui/jlib/emocmutl.jar oui/jlib/http_client.jar oui/jlib/oneclick.jar oui/jlib/prov_fixup.jar oui/jlib/share.jar oui/jlib/xmlparserv2.jar oui/jlib/lib/emocmclnt-14.jar oui/jlib/lib/emocmclnt.jar oui/jlib/lib/emocmcommon.jar oui/jlib/lib/http_client.jar oui/jlib/lib/jcert.jar oui/jlib/lib/jnet.jar oui/jlib/lib/jsse.jar oui/jlib/lib/log4j-core.jar oui/jlib/lib/osdt_core3.jar oui/jlib/lib/osdt_jce.jar oui/jlib/lib/regexp.jar oui/jlib/lib/xmlparserv2.jar oui/jlib/Libraries.old/NtServiceQueries.jar oui/jlib/Libraries.old/WindowsFolders.jar oui/jlib/Libraries.old/WindowsGeneralQueries.jar oui/jlib/Libraries.old/areasQueries.jar oui/jlib/Libraries.old/clusterActionLib.jar oui/jlib/Libraries.old/clusterQuery.jar oui/jlib/Libraries.old/dbActions.jar oui/jlib/Libraries.old/dbQueries.jar oui/jlib/Libraries.old/fileActionLib.jar oui/jlib/Libraries.old/fileQueries.jar oui/jlib/Libraries.old/generalActions.jar oui/jlib/Libraries.old/generalQueries.jar oui/jlib/Libraries.old/jarActionLib.jar oui/jlib/Libraries.old/launchpadaction.jar oui/jlib/Libraries.old/netQueries.jar oui/jlib/Libraries.old/ntServicesActions.jar oui/jlib/Libraries.old/oradim.jar oui/jlib/Libraries.old/rgsActions.jar oui/jlib/Libraries.old/rgsQueries.jar oui/jlib/Libraries.old/spawnActions.jar oui/jlib/Libraries.old/standardDialogs.jar oui/jlib/Libraries.old/unixActions.jar oui/jlib/Libraries.old/unixQueries.jar oui/jlib/Libraries.old/w32OcxLib.jar oui/jlib/Libraries.old/w32RegActionLib.jar oui/jlib/Libraries.old/w32RegQueryLib.jar oui/jlib/Libraries.old/wingeneralActionLib.jar oui/jlib/jlib/emocmclnt-14.jar oui/jlib/jlib/emocmclnt.jar oui/jlib/jlib/emocmcommon.jar oui/jlib/jlib/http_client.jar oui/jlib/jlib/jcert.jar oui/jlib/jlib/jnet.jar oui/jlib/jlib/jsse.jar oui/jlib/jlib/log4j-core.jar oui/jlib/jlib/osdt_core3.jar oui/jlib/jlib/osdt_jce.jar oui/jlib/jlib/regexp.jar oui/jlib/jlib/xmlparserv2.jar
INFO: chmod 0750 srvm/admin/ractrans
INFO: chmod 754 OPatch/crs/auto_patch.pl OPatch/crs/crsconfig_lib.pm OPatch/crs/crsdelete.pm OPatch/crs/crspatch.pm OPatch/crs/oracss.pm OPatch/crs/patch112.pl OPatch/crs/s_crsconfig_defs OPatch/crs/s_crsconfig_lib.pm OPatch/crs/log/dummy
INFO: chmod 644 OPatch/docs/FAQ OPatch/docs/Users_Guide.txt OPatch/docs/Prereq_Users_Guide.txt
INFO: chmod 755 OPatch/opatch
INFO: chmod 644 OPatch/opatchprereqs/oui/knowledgesrc.xml OPatch/opatch.pl OPatch/opatch.ini OPatch/emdpatch.pl OPatch/opatchprereqs/opatch/opatch_prereq.xml OPatch/opatchprereqs/opatch/rulemap.xml OPatch/opatchprereqs/opatch/runtime_prereq.xml OPatch/jlib/opatch.jar OPatch/jlib/opatchutil.jar OPatch/jlib/opatchprereq.jar OPatch/jlib/opatchactions.jar OPatch/jlib/opatchext.jar OPatch/jlib/opatchfmw.jar
INFO: chmod 754 OPatch/fmw/application.py OPatch/fmw/init_def.py OPatch/fmw/main_driver.py OPatch/fmw/node_manager.py OPatch/fmw/prereq.py OPatch/fmw/start_stop.py
INFO: chmod 644 OPatch/opatchprereqs/prerequisite.properties
INFO:
INFO: Start output from spawned process:
INFO: ----------------------------------
INFO:
INFO: chmod: ERROR: invalid mode
INFO: chmod: WARNING: can't access bin/cmadmin
chmod: WARNING: can't access bin/cmctl
INFO: chmod: WARNING: can't access bin/cmgw
chmod: WARNING: can't access bin/cmmigr
INFO: chmod: WARNING: can't access bin/procob
chmod: WARNING: can't access bin/rtsora
INFO: End output from spawned process.
INFO: ----------------------------------
INFO: DONE Executing permissions file from :/tmp/OraInstall2011-12-08_04-13-37PM/fastcopy/setperms1.sh
INFO: InstallProgressMonitor: Starting phase 2
INFO: Installation in progress
INFO: Installation in progress
INFO: Copying files for 'Sun JDK 1.5.0.24.08 '
INFO: Copying files for 'Sun JDK 1.5.0.24.08 '
INFO: 12/8/11 4:19:20 PM EST: Starting install Install Phase 1 of component Sun JDK
INFO: Calling Action unixActions10.2.0.3.0 createLink
     source = ../libjsig.so
     destination = /app11g/oracle/product/11.2.0/dbhome_1/jdk/jre/lib/sparcv9/server/libjsig.so
     overwriteExistingLink = true
     overwriteExistingDir = null
INFO: creating link '../libjsig.so' for '/app11g/oracle/product/11.2.0/dbhome_1/jdk/jre/lib/sparcv9/server/libjsig.so'
INFO: creating link '../libjsig.so' for '/app11g/oracle/product/11.2.0/dbhome_1/jdk/jre/lib/sparcv9/server/libjsig.so'
INFO: Calling Action unixActions10.2.0.3.0 createLink
     source = ../libjsig.so
     destination = /app11g/oracle/product/11.2.0/dbhome_1/jdk/jre/lib/sparc/client/libjsig.so
     overwriteExistingLink = true
     overwriteExistingDir = null
INFO: creating link '../libjsig.so' for '/app11g/oracle/product/11.2.0/dbhome_1/jdk/jre/lib/sparc/client/libjsig.so'
INFO: creating link '../libjsig.so' for '/app11g/oracle/product/11.2.0/dbhome_1/jdk/jre/lib/sparc/client/libjsig.so'
INFO: Calling Action unixActions10.2.0.3.0 createLink
     source = libjdgaSUNWffb.so
     destination = /app11g/oracle/product/11.2.0/dbhome_1/jdk/jre/lib/sparcv9/libjdgaSUNWafb.so
     overwriteExistingLink = true
     overwriteExistingDir = null
INFO: creating link 'libjdgaSUNWffb.so' for '/app11g/oracle/product/11.2.0/dbhome_1/jdk/jre/lib/sparcv9/libjdgaSUNWafb.so'
INFO: creating link 'libjdgaSUNWffb.so' for '/app11g/oracle/product/11.2.0/dbhome_1/jdk/jre/lib/sparcv9/libjdgaSUNWafb.so'
INFO: Calling Action unixActions10.2.0.3.0 createLink
     source = client/libjvm.so
     destination = /app11g/oracle/product/11.2.0/dbhome_1/jdk/jre/lib/sparc/libjvm.so
     overwriteExistingLink = true
     overwriteExistingDir = null
INFO: creating link 'client/libjvm.so' for '/app11g/oracle/product/11.2.0/dbhome_1/jdk/jre/lib/sparc/libjvm.so'
INFO: creating link 'client/libjvm.so' for '/app11g/oracle/product/11.2.0/dbhome_1/jdk/jre/lib/sparc/libjvm.so'
INFO: Calling Action unixActions10.2.0.3.0 createLink
     source = libjdgaSUNWffb.so
     destination = /app11g/oracle/product/11.2.0/dbhome_1/jdk/jre/lib/sparc/libjdgaSUNWafb.so
     overwriteExistingLink = true
     overwriteExistingDir = null
INFO: creating link 'libjdgaSUNWffb.so' for '/app11g/oracle/product/11.2.0/dbhome_1/jdk/jre/lib/sparc/libjdgaSUNWafb.so'
INFO: creating link 'libjdgaSUNWffb.so' for '/app11g/oracle/product/11.2.0/dbhome_1/jdk/jre/lib/sparc/libjdgaSUNWafb.so'
INFO: Calling Action unixActions10.2.0.3.0 createLink
     source = ../bin/javaws
     destination = /app11g/oracle/product/11.2.0/dbhome_1/jdk/jre/javaws/javaws
     overwriteExistingLink = true
     overwriteExistingDir = null
INFO: creating link '../bin/javaws' for '/app11g/oracle/product/11.2.0/dbhome_1/jdk/jre/javaws/javaws'
INFO: creating link '../bin/javaws' for '/app11g/oracle/product/11.2.0/dbhome_1/jdk/jre/javaws/javaws'
INFO: Exception thrown from action: createLink
Exception Name: LinkException
Exception String: Error in creating link from ../bin/javaws to /app11g/oracle/product/11.2.0/dbhome_1/jdk/jre/javaws/javaws
Exception Severity: 1
I

Error when creating link to documents from material

Hi all,
while creating the purchase order the error message "Error when creating link to documents from material 61260224060" is displayed.
why this error message is displayed.?
Regards,
GaneshRaja

Hello Ganesh
Please check material master - view 'Bases data 2'.
There is checkbox 'No link'. You can activate this checkbox if you are not storing any drawing/designe docuemnt for this material.
Try to do this and check out again.....
If this helps you in resolving your issue, i would appreciate if you reward the answer with suitable points.
Best Regards
Avinash

Enable for Commenting and Create Links from URL (JS, Acrobat Pro)

I need to change a PDF's settings to Enable for Commenting and Annotation and then Create Links from the document's URLs. I can do it manually, but I don't see where these properties can be adjusted with Javascript.
Please help!

Regarding converting URL's to real links, this script (created by me) can do
that:
http://try67.blogspot.com/2009/06/acrobat-add-hyperlinks-based-on-partial.html

Creating Links From Converted Word docs

i converted a Word docx document to HTML that is comprised of a set of docs that are linked together.
Consequently each section in the complete doc, (except the Title and Table of contents), actually becomes a modifiable JPG text box.
I have been trying to create links from the Table of Contents to the individual sections.
I have tried everything but I am missing some concept. It's one of those things if I just see it once I'll slap myself over head fro not fiquring it out.
Anyone have an answer for me

I hate to burst your bubble, but Word docs are not suitable for web pages. My advice is to PDF your docx.
Nancy O.

It used to be that when I created a pdf from a word or publisher document, hyperlinks worked fine. Now I cannot get them to work unless the text displayed for the link is the complete address and it all appears on one line. Why?

it used to be that when I created a pdf from a word or publisher document, hyperlinks worked fine. Now I cannot get them to work unless the text displayed for the link is the complete address and it all appears on one line. Why?

You can print to the Adobe PDF printer, but that only creates links that Acrobat or Reader recognize as such. That is the reason for needing the entire URL on one line. It is not actually an embedded link, but one created by Acrobat on the fly. With OFFICE 2013 you have two choices: 1. create the PDF with the print to Adobe PDF and then add the links in Acrobat so that they are complete or 2. I think the WORD save as PDF or XPS will create the PDF with links, but not sure. If so, that would be the quickest solution for you, but be aware of potential problems with the MS plugin.
Of course, the third option is to upgrade to XI which can be done with AA 9. You will probably not be eligible for a for an upgrade to whatever the next version will be.

Have trouble query after creating a linked server from SQL Server 2008 to EXCEL 2007

I created a linked server from SQL Server 2008 Management Studio Express to an EXCEL 2007 workbook using:
sp_addlinkedserver @server='LSERVER_EX0', @srvproduct='EXCELDATA', @provider='Microsoft.ACE.OLEDB.12.0', @datasrc='C:\Temp\abc.xlsx', @provstr='EXCEL 12.0'
The linked server LSERVER_EX0 was created, but I cannot see any table(excel sheet), and when i ran the following to query tables,
sp_tables_ex 'LSERVER_EX0'
I got:Cannot obtain the schema rowset "DBSCHEMA_TABLES" for OLE DB provider "Microsoft.ACE.OLEDB.12.0" for linked server "LSERVER_EX0". The provider supports the interface, but returns a failure code when it is used.
Any hint why?
on another note, i was able to import the EXCEL sheets using the Import and Export Data wizard, but i cannot control the column data type and size in this way.

Open management studio, goto "Server Objects"->"Linked Servers"->Providers, select the provider you use, right click it and in provider options, check "Allow inprocess".

How to disable - General preference - Create links from URLs. Using Acrobat Javascript

http:\\www.sdss.com should not be suggested as a link. We have manual option to uncheck -> Create links from URLs, but I need to achieve this through the script.
Please help on this ASAP.

That is an end user preference only. Not accessible by JavaScript. If you control the installation, then you can turn off that option for the installation but the user could still turn it back on.

Editing "Create links from URLs"

My document has Preferences | General | "Create links from URLs" enabled. But when I hovver the cursor over the link, it is incorrect, with a trailing space character, showing as http://www.example.com/webaddress/20 (it should not have the trailing 20).
I've tried using the Text Touch Up tool, but there is no trailing space in the text, and if I try and delete the last few characters, and retype them, then the Web address shows squares where I change the chacters, eg. http://www.example.com/webadd⃞⃞⃞⃞⃞⃞
How can I edit the automatically generated web address?

How can I edit the automatically generated web address?
You can't.
With the link tool you can add a link with the correct address.

Create links from URLs

Hello ! i really hope someone can help me here.
part of my job is to put magazines online. To do that, i work with all the pages combined together in one document (booklet).
Then i click on Advanced ==> Create Links from URLs...
Acrobat will locate, for me, all the wed addresses in all the pages of my document. It will find the "www." and pickup the rest to create the weblink.
once this is done, i have to go through all the pages and create the links for the addresses that Acrobat DIDN'T find. The ones that doesn't start with "www."
•• The problem is that in most ads, the clients don't put the "www." anymore, so this is a lot of work for me, since i do this for 40 different magazines, and sometimes has 300 pages !
i am looking for a way for Acrobat to "recognize" the addresses that ENDS with ".com" or ".ca"...
...so it would make my life easier : )
thank you, in advance, for your help : )
(i also speak french)

I think you are going about the process backwards. The links should be placed into the document in the software used to create the original content. If the content was created in InDesign (for example) it is easy to put the links into the ID file, then you can export the pdf with links intact. Then you can use Adobe's advanced search capabilities to search for "www.", ".com", ".ca" and even ".mil". It might be possible to create a plug-in to do what you want, but assuming you are not a programmer, that would cost $.

How to run a BI query from SSM

HI,
My client would like to drill down to a BI query where the starting point is a KPI.
For eg, we have a KPI "Turnover". When we are at kpi detailed level for a specific period, we would like to run a query to have detailed information for turnover (we dont want to use report functionnality of SSM).
We are using SSM 7.5 and BW queries as data provider.
Is there a way to achieve this ? (web service ? )
Thanks in adavnce

Jacques,
You cannot run a BI Query from the end user interface of SSM. Your alternatives are to create an associated report inside SSM or use an Associated Link in the KPI Details section.
Right above the graphing on the KPI detail page there is the link Create Associated Report. SSM has some template reports and allows users to put together a report based on available SSM data.
There is also the possibility of using Associated Links on the KPI detail page to point the user via a url to another reporting application, though it would not bring that data with it.
Regards,
Bob

SQL Server linked servers screens SSMS

Where in SSMS can you get to the "linked server" screen for configuration details for existing linked servers, as opposed to setting up a new linked server, I want to check the security tab via the software GUI as opposed to running SQL. I cant
see where you can see them, I know from memory when setting up a new linked server there is a "general", "security" and "server options" tabs, so I assume you can see all of those for already created linked servers.

Check Server Objects --> Linked Servers in SSMS object explorer.
Kalman Toth Database & OLAP Architect
Free T-SQL Scripts
New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012

Creating Link ID from SSM 7.0 to BI

Similar Messages

Maybe you are looking for