Creating load for performance testing on SSAS and Power View on SharePoint 2013

We have SQL Server DW, SSAS OLAP Cube and Sharepoint 2013 on dedicated virtual machines.
We would like to create load simulating use of 500 end-users.
What are best tools?
What are best methods?
Kenny_I

Hi Kenny_I,
According to your description, you want to create a PowerView report using SQL Server Analysis Services database in a SharePoint site, now you need to do a load testing for this report, right?
In SharePoint level, there are many tools that helps in the load testing. For the details, please refer to the link below.
SharePoint (Performance, Stress ) Load Testing
For the PowerView report level, you can refer to the link below to see how to track down Power View Performance Problems.
Tracking down Power View Performance Problems
Regards,
Charlie Liao
If you have any feedback on our support, please click
here.
Charlie Liao
TechNet Community Support

Similar Messages

How to build high usability navigation for Power View on SharePoint 2013?

I have Power View on SharePoint 2013. I have both SSAS Multidimentional and Tabular model in use.
I have several Report.drlx file in Report libary in SharePoint.
When I click the file, it works fine, but I feel that there are usability problems like:
A) Getting back to SharePoint site is not intuitive. Difficult to find home.
B) Diffucult to move between report to another. Need to return Document library.
What is best practise for displaying several Power View reports on SharePoint?
Kenny_I

Hi Kenny_I,
Just as you said, we cannot directly navigate to Home page when we view an .rdlx report in SharePoint site. We need click the Arrow to go to the previous page (Document Library), then click “Home” to navigate to Home page. If we want to move from a report
to another report, we should still use the same way. This is by design.
If you want to jump from one report to another report, we can add a hyperlink to a text box in a sheet or view. Personally, I understand your feeling and how frustrated when you find this issue. So, it is my pleasure to help you to reflect your recommendation
to the proper department for their consideration. Please feel free to submit your situation on our product to the following link:
https://connect.microsoft.com/.Your feedback is valuable for us to improve our products and increase the level of service provided.
Thank you for your understanding.
Regards,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Cannot connect to specific Cube through BI Semantic Model for Power View in SharePoint 2013

I'm trying to create a connection to an Analysis Services Cube through a BI Semantic Model connection in SharePoint 2013 to create a Power View report. I'm able to connect to other cubes on the same server, and I have SQL Server 2012 SP1 Update 9 installed
so it's not a versioning issue.
I've captured a log of two different connection attempts to show this in action. I can't post links, but just send me a message if you need it, just in case there's any interest in it. The first is a successful connection to an alternate cube
on the same server, and the second is an unsuccessful attempt that produces and error with "Internal error: An unexpected exception occurred.".
On the SharePoint side, the error is reported as:
Internal error: An unexpected exception occurred. ---> Microsoft.ReportingServices.DataExtensions.AdomdTestConnectionException: Internal error: An unexpected exception
occurred.
This cube was working the previous day, but it has since been edited and it no longer works now but there's no clear reason why. It can still be queried directly through SSMS with MDX queries, and produces no errors.
Any help is much appreciated,
Ryan

Hi Ryan Myers,
According to your description, when you tried to connect to an Analysis Services Cube in SharePoint 2013 through BI Semantic Model, you get the error message: Internal error: An unexpected exception occurred. But the MDX queries works fine in SSMS.
It's hard to give you the exact reason that cause this issue based on the limited information, please validate if the connection string is correct. Besides, we can troubleshoot this issue by using the Windows Event logs and msmdsrv.log.
We can access Windows Event logs via "Administrative Tools" --> "Event Viewer". SSAS error messages will appear in the application log.
The msmdsrv.log file for the SSAS instance that can be found in \log folder of the instance. (C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log)
Reference:
Data collection for troubleshooting Analysis Services issues
Data Connection For a Power View Report
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu
If you have any feedback on our support, please click
here.

HTTP Receiver for Performance Testing

Dear Experts,
I need to send the Asynchronous XI responses back to HTTP client for performance testing. Any suggestions how this can be achieved?
Thanks,

Hi,
>>>.I'm not sure if HTTP receiver adapter can be used for this to send it back to the HTTP test client?
no, it cannot htt test client can work in sync mode or async - async does not have any reponses
>>>But, my requirement is to test the performance of 2 asynchronous Webservice performances. We send the SOAP request via HTTP
but this is so simple - send HTTP call to SOAP and from SOAP you send it to the final receiver right ?
at the end of receiver processing create a call to XI again and send via HTTP to where ever you want
or to a file if you want to test receiver processing only
I don't see any issue here...
Regards,
Michal Krawczyk

Is there any tool uses Selenium tests for performance test

Hello!
I am looking for a tool for using performans test.
I have Selenium test scenarios and I want to use them for performance tests.
Which tools use Selenium tests for performance tests or
Which are the best tools to test a JSF Application? Which experiences
have you made?

Hi,
If you have the test kit installed i.e. the CTK , then you will find it under the corresponding test folder. For example , i have it under C:\Program Files (x86)\WindowsEmbeddedCompact7TestKit\tests\target\
The test harness files , tux and kato can be found under
C:\Program Files (x86)\WindowsEmbeddedCompact7TestKit\harnesses\target\
The above two files tux and kato would be required for running any tests on Windows embedded compact platforms.
Depending on your platform , you may choose to use the corresponding binaries in the sub directory.
Regards,
Balaji.

Any suggession on Tools for Performance testing of application designed for Blackberry phones.. which can get some details on CPU usage, memory, response time?? any help on the same is much appriciated.

Hi Team,
Any suggession on Tools for Performance testing of application designed for Blackberry phones.. which can get some details on CPU usage, memory, response time?? any help on the same is much appriciated.
Thank You,
Best Regards,
neeraj

Hi Team,
Any suggession on Tools for Performance testing of application designed for Blackberry phones.. which can get some details on CPU usage, memory, response time?? any help on the same is much appriciated.
Thank You,
Best Regards,
neeraj

Does performance point support effective username on https in sharepoint 2013

I see that analysis services effective username is supported from Sharepoint 2013.
In Central admin==> manage services==>Performance point service app there is a note saying effective user name is not supported in https or powerpivot.
But in the technical documentation it says only about power pivot http://technet.microsoft.com/en-us/library/jj219741.aspx but
not about https
My question is does performance point support effective username on https in sharepoint 2013
Raj-Shpt

Hi Raj,
Please check if the following articles (e.g. mentioned "Use Encryption for Data") are what you want, and you may
also post this question in
SSAS forum for a better assistance.
http://msdn.microsoft.com/en-us/library/dn140245.aspx#bkmk_auth
http://www.c-sharpcorner.com/UploadFile/chinnasrihari/sharepoint-2013-productivity-services/
Thanks
Daniel Yang
TechNet Community Support

How to create a quarterly view in SharePoint 2013

How do you create a 3 month view in SharePoint 2013, preferably without adding code?

Hi
you can create two additional calculated column to do.
http://blog.pentalogic.net/2009/11/howto-filter-items-current-calendar-month-view-sharepoint/
http://iwillsharemypoint.blogspot.in/2012/03/sharepoint-list-view-of-current-month.html
Rajendra Singh
Walking on water and developing software from a specification are easy if both are frozen
If a post answers your question, please click Mark As Answer on that post and Vote as Helpful

Integrate Workday and ServiceNow applications with SharePoint 2013 online

Hello, we have to integrate Workday and ServiceNow applications with SharePoint 2013 online and need to display data from these applications
to SharePoint 2013 intranet site.
Any information about the integration of Workday and ServiceNow applications with SharePoint 2013 would be greatly appreciated. Thanks!
Regards,
Shailendra

Hi Shailendra,
I searched a lot, there seems very few information from internet and internal about this topic, I'm not familiar with Workday and ServiceNow applicaitons, I would recommend you may post in the following community sites(which should be offcial
sites) for a better assistance regarding the integration questions between Workday and ServiceNow and SharePoint Online(O365).
https://community.servicenow.com/thread/174050
https://community.workday.com/
http://community.office365.com/en-us/f/154.aspx
Thanks
Daniel Yang
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Getting Power View on Sharepoint to interpret latitude and longitude correctly

After pulling my hair for a few dozen hours I come here with a simple question.
I have a SQL Server 2012 View - joining 3 different tables, one of which contains latitude and longitude in Decimal(9,6) format.
I have a Tabular model using this view which I push to Analysis services and further on to Sharepoint 2013.
However, when I pull the longitude and latitude columns to the corresponding fields in Power View, the data is just placed standardly in the Artic Sea. Now I have tried changing to and from commas and periods as decimal separator but nothing seems to work.
I can get it to work using Power Map and Power View for Excel 2013 but not on Sharepoint.
I have spent a great deal of time on Google searching for answers but nothing seems to adress this issue, despite it being asked before

I too have been frustrated by this behavior. I also have issues with locations in Puerto Rico showing up in Europe using the zip code and/or state. I've found when I use lat/long things look correct which makes resolving this
issue even more pressing for me.
Unfortunately in the SharePoint construct you cannot control how the api interrupts the address like you can in Excel. I think that is why models in excel recognize latitude and longitude without issue but in SharePoint it's a no go. I have
not tried to see if the tabular construct recognizes lat/long.

How/What can we monitor in DB02 for performance testing?

We are conducting a performance test/load before golive of HCM in SAP.
I am looking at DB02 but have NO idea of what to monitor for? there is so MUCH
Any suggestions, would certainly be appreciated asap
Thank you so much!
maria

Well, rather than trying to explain in the forum, I suggest you download the document "The SAP DBA Cockpit for Microsoft SQL Server" from:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/1062428c-f1df-2910-b08f-c322feddcd10?quicklink=index&overridelayout=true
This will explain everything you need to know about DB02 transaction for MS SQL server. You can read through it find out what all monitoring can be done.
You can check the following Areas:
Performance (ST04)
Space (DB02)
Configuration = Some ST04 detail screens plus new ones
Diagnostics = Some ST04 and DB02 detail screens plus new ones
Frankly, Space and performance are the main areas.
Refer to the guide and this should solve all your doubts.
Regards,
Shitij

IDOC massive loading (for stress tests purposes)

Team,
Is there a clean and easy way to load (tons) of IDOC into SAP XI ?
Using the WE19 tcode ? Write an ABAP pgm that will loop ?
We are looking for a method to do our IDOC stress test.
Merci !

Hi,
in WE20 put IDOCs in collect mode (outbound profile)
then record WE19 and create a few 1.000
then bd87 and here we go
or BD10 and you can create many at once (materials)
Regards,
michal

Just days ago, I downloaded and created folders for two batches of photos and now they are missing. They were not deleted by anyone, and even if they were, they were not found in my trash can. What happened? They were erased from my camera, so I am upset.

Just days ago, I downloaded and created folders for 2 batches of photos I downloaded from my camera to iphotos but now both are missing. They were not deleted and even if they were, were not found in my trashcan. I have looked through every folder and they are not there. Is there a bug that can get into iPhoto to do this? Is there a program Apple offers to retrieve lost photos? Thank you.

debbie5891 wrote: ... They were not deleted and even if they were, were not found in my trashcan...
How do you know they were not deleted? Is it possible that they were moved to the trash and the trash has been emptied, if not by you, perhaps by someone else?
In the best case, you mean they were not deleted from your camera. If so, it will be simple to merely download again from your camera after you have corrected any problem with your Mac or workflow.
If you have a way to be certain that your two folders were not deleted from your Mac, follow the directions provided by your Mac's Disk Utility to repair your Disk (not Disk Permissions.) On more than one occasion, disk repair has restored the visibility of missing folders I knew I had not deleted. If you have trouble with the process, post back which specific Mac OS version ( > About This Mac) you are using so we can offer specific help.
It is also possible that the missing folders might be saved somewhere you do not expect them to be.
It is also possible that they may merely be invisible and, thus, not showing in your Finder windows even after performing a Disk Repair.
Here are some more ideas you can consider:
Restart Mac and then look where you expect the folders to be. They may be visible there now.
If not, try a Spotlight search for the folder name(s) you used. Spotlight may give you a list of places to look. If you don't remember the folder name(s), try a search for the file type your camera uses for saved images. My cameras save "jpg" files, but yours may save other image file types.
You can also open a finder window and use the window's search oval to search. The method allows you to use the search "+" button to add invisible items via the "File Visibility" choice.
debbie5891 wrote:... I have looked through every folder and they are not there....
If you are using any version of Mac OS X, I doubt this statement can be true.
If you select your disk volume name (not the Media item) in the sidebar of your Mac's Disk Utility, you will see that the number of Folders and files on your disk is very large. For example,I keep my startup disk small and write most of my files to other disks. Even so, my startup disk contains more than 195,000 folders.
If you mean you used some software to search each folder, please post back the name of the app you are using.
debbie5891 wrote: ... Is there a bug that can get into iPhoto to do this? ...
I have not had the problem you describe, nor have I heard of such an iPhoto Bug.
I have used every version of iPhoto I have seen including the current new version: iPhoto '11 version 9.5 (902.7). You can find the version you are using by executing the iPhoto > About iPhoto menu command and post it back here.
debbie5891 wrote:... Is there a program Apple offers to retrieve lost photos? ...
I am not aware of any Apple apps that work specifically on photo files. If you know the pathname to the lost files, and if you are comfortable with Unix commands, you might be able to use your Mac's Terminal utility to retrieve at least some of your images. However, it will be MUCH simpler to merely download another copy from your camera.
You can search the Mac App Store for "unerase" to find several apps that can unerase files, including deleted photo files, in certain circumstances even after the trash has been emptied. To determine whether one or more of them may meet your needs, see their product info and reviews for specifics about each one.
debbie5891 wrote:...Thank you.
You're most welcome.
If you need to post back for more information, please provide specifics on your Mac OS, iPhoto version, which of the suggestions offered here you have tried, and any details not already provided about the problem status.
Message was edited by: EZ Jim
Mac OSX 10.9

Tools for Performance Testing ?

All
We are planning to upgrade to Oracle version 10.2.0.4 in SAP landscape.
Here is my question:
We have one SAP box Oracle version 10 and other SAP box is with Oracle version 10.2.0.4.
Before upgrading to Oracle version 10.2.0.4 in the Production, we wanted to test the performance of Oracle version 10.2.0.4,
So we decided to run programs(report) in Oracle ver 10 box Vs Oracle version 10.2.0.4 box to check how system taking time to execute.
But my question is whether do we have any kind of performance analyser tools in SAP so that we can cross check with both the boxes performances.
I heard tool called coverage analyser is it works in this scenario.
Rick

Hi,
Plz find the below link for performance analyzing techniques in SAP.
http://help.sap.com/saphelp_nw04/helpdata/en/c7/af9a79061a11d4b3d4080009b43351/frameset.htm
Thanks,
Sree.

Creating exe for application that contains ARINC and MIL Codes

Hi all,
I am not able to create exe for my application that contains ARINC and MIL. To be precise, the ARINC and MIL part is not working in the exe created.
Please tell me how to create an EXE with ARINC and MIL codes.

Did you install the according device drivers on the target machine? And no I don't mean the instrument drivers that you use in LabVIEW but the OS device drivers from NI (resp. AIT), that will access the hardware boards and provide an interface to the LabVIEW application. I would expect them to be part of the AIT SDK kit that comes with the boards.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Creating load for performance testing on SSAS and Power View on SharePoint 2013

Similar Messages

Maybe you are looking for