Creating multiple point to point connection

Consider me mostly a newbie. I have a router that's connected to a WiFi radio system. The radio is, for all intent and purposes, transparent to the network.
Point is now, I want to connect via the same WiFi radio system to 4 other routers (each other router has the same radio system) on a point to point basis.
All five routers have static IPs.
The need is to create 4 static point-to-point link, over 1 single interface on the router that's connected to the radio system.
Can this be done? Is so, how? Help please?

First of all, I do not really see the advantage of configuring this as point-point. Appearently you want to make all traffic flow over the central router? The radio is actually a point-to-multipoint medium by nature. This means that the bandwidth on the link will be shared, no matter what you configure.
You could "enforce" point-point behaviour by means of static routing. On all spoke-routers you configure a single static route 0.0.0.0 with the hub router as the next hop.
On the the central router you can then put statics to the respective destinations. Very important is to use the interface command "no ip redirects"
This prevents icmp redirects being sent which would cause non-point-to-point behaviour. This implies that you have used the same ip subnet for all routers. This is what I would configure for this case.
Alternatively, you may use different subnets per router and apply secondary IP's on the hub.
Regards,
Leo

Similar Messages

Stop creating multiple points when making a line

Hello, new to this and for some reason when I go to create a line or shape it keeps creating multiple end points like a fan for example when using the line, or multiple boxes from the same start point etc...any help? Can't seem to find any content on this.

That was it exactly, huge thanks to you!

How to create multiple folder levels of connections

Is it possible to create multiple levels of folders in the Connections tab. For example, I have 3 projects and each projects have dev, qa, prod. The documentations that come with sqlDeveloper2.1 only tells how to create 1 level of folder.
Please share your suggestion if any.
Thanks.

I also tried this through the config file ~/.sqldeveloper/system2.1.0.63.73/o.sqldeveloper.11.1.1.63.73/product-preferences.xml.
Seems to me that nesting additional list elements for subfolders does not work.

AD-bound Macs creating multiple accounts, losing directory connection

I've submitted a bug to Apple on this
(https://bugreport.apple.com/cgi-bin/WebObjects/RadarWeb.woa/12/wo/v163WoLwrzZZk9 a3bks1bM/3.33.26.0.3)
back in September with no response.
I support a large east-coast client with a physically disparate user-group. I'm not on-site all the time so can't run the directory services log in debug mode, but have to solve the problem quickly...the shotgun approach so to speak.
AD-bound workstations always create two home folders and occasionally produce more than one NetInfo account (as many as 3) with the exact same information. On occasion this causes login failures(shake-off), the only workaround is to delete the NetInfo records and re-create the mobile account.
Symptoms of an affected workstation are also that the user can't change their own password from the accounts pref pane (user clicks on change, puts in old, new pass, clicks change, then gets prompt saying they are not allowed to do this, contact their administrator.)
dscl localhost brings up normal session, but cd-ing into Active Directory/All Domains/Users and trying to list (ls) brings back: "DS error: eDSCannotAccessSession"
Steps to Reproduce:
1. Bind the system to an AD domain with different pre and post windows 2000 profile names.
2. Log in as an AD user.
Expected Results:
1. Machine will create two home folders, using the shortname of the user you logged in as, but also able to browse the other one (username is lastnamefirstinitial, so home folder is the same, but also able to browse first.last homefolder.)
Actual Results:
The same as expected, except that on occasion two or more Netinfo records are created (seems to compound over time)
Does not occur (account duality) if naming profiles are standardized, but login issues still occur.
Anyone see this before? AD is 2003...

iPhoto 6 users: http://photocast.mac.com/eddyer/iPhoto/screenshots/index.rss
FireFox, iLife '05 and/or PC Users:
http://web.mac.com/eddyer/iPhoto/screenshots/index.rss
interesting...the only difference in the records as seen in dscl and Netinfo Mgr are the SMB last logon time/SMB password last reset time...all other entries appear identical.

How do I create multiple-up pages populated with variable data?

I am trying to create a variable data Illustrator file but with a catch, I have to create multiple points of data on one artboard. I am using a template with 36 identical shapes, and I'm trying to add a different image to each based off of using variable data. I understand the premise of creating multiple output files based off of an illustrator file and data, but I have to create a single output file using 36 points of data, all QR codes. The reason is that this 36-up 14.5" x 14.5" sheet will be printed on a large format inkjet and then be fed into another machine (not a cutter) that requires that specific layout for it's process. I cannot create individual files, I need sheets based off of my 14.5" x 14.5" 36-up template.
Any suggestions other than making each shape in the template a separate variable (even though they are all the exact same shape) would be greatly appreciated.
My goal is to populate each of these shapes with a different QR code and then output the whole sheet as a single .EPS or .PDF file.

My goal is to populate each of these shapes with a different QR code and then output the whole sheet as a single .EPS or .PDF file.
You're barking up the wrong tree for this with Illustrator's Variables palette.
Think of it like this:
Imagine a typical spreadsheet with multiple rows of the same kind of data, except for the first row which serves as the "labels" of the columns.
The on-page objects which you define as Variables in Illustrator correspond to the first row; the column labels.
The datasets correspond to the following rows of values below the label row.
Cycling through the datasets simply moves up and down the rows, revealing one row's data at a time for each of the column labels.
Your multi-up array does not fit that data model. You are essentially trying to make a layout showing all the individual cells below the single label of one column (downward across all rows). (Illustrator's Variables feature doesn't even let you put multiple instances of a single variable in the document, so that the same value occurs in multiple places.)
You're trying to build the functional equivalent of a typical "gang up" press sheet, like a 10-up layout of business cards, each showing the same kind of data (name, phone, etc.) for multiple employees, so that you don't have to do separate press runs for each employee. That's certainly a common need, and one quite appropriate to a program like Illustrator. But Illustrator's Variables feature does not do that.
Essentially, what you are wanting to do is to replicate the basic functionality of any program which is used to print labels from data (like the typical mail merge function for address labels which are ganged up with some number of different labels on a page). What you want could be done in Illustrator via a custom JavaScript, but it would be a pretty silly exercise in reinventing the wheel. If it were me, I'd probably build the solution in FileMaker Pro (a database program), depending on the specific graphics requirements. However, you should be able to do it in InDesign, using its data merge feature.
JET

How to create multiple expanding outlines with all points equal distance to original shape?

Here's an extremely simple example.. It works with a circle or a square, obviously because it has the same height and width. The problem is when you have irregular shapes, (or in this case, an oval). I know I've seen solutions to this in the past, but I just can't think of how to word this question and find them again.
I know you can create multiple strokes for an object in the appearance palette, but I'm looking for something more effective than just having colored stroke > white stroke > colored stroke> white stroke > etc.
Here's a couple examples of the kind of effect I'm looking for.
Any help would be greatly appreciated.

You need to use Offset path. Object>Path>Offset path. Use negative numbers to go inside of an existing shape, positive to go outside.
[ signature removed by forum host - advertising is not permitted ]

Converting multiple points to line

Hi All
I have table consist of point data.. how to convert multiple points to line data.. if anyknows pls tell me ..
Thak you

user13340372,
. . . .Are you trying to draw a line between 2 points or draw a line connecting N points?
How to Create a Line From 2 Points_
. . . .You could use the SDO_Geometry constructor. For example, if you have a table POINTS defined as (ID NUMBER, FromPt SDO_GEOMETRY, ToPt SDO_GEOMETRY), then you could:
SELECT
    SDO_GEOMETRY(
    'LINESTRING ('||
    -- concatenate coordinates from FromPt
    REPLACE(REPLACE(p.FromPt.Get_WKT(), 'POINT (', NULL), ')', NULL)||','||
    -- concatenate coordinates from ToPt
    REPLACE(REPLACE(p.ToPt.Get_WKT(), 'POINT (', NULL), ')', NULL)||')'
    --- SRID
    , 4326)
FROM
    POINTS p;
How to Create a Line From N Points_
. . . .In a "connect-the-dots" puzzle, you draw lines from one numbered point to the next numbered point. There, the numbers define how points are related. If you dont have that information, then you need to decide how you want your points connected. Here are a few options - your requirements should indicate which (if any) is suitable:
. . . .(a) Draw Arbitrary Linestring Through Points: user10278189 already posted that PL/SQL solution (above).
. . . .(b) Connect Nearest Neigbors: set CURRENT_POINT to a point (e.g., bottom-left). Then identify its nearest-neighbor (hereinafter, "NextPoint") using SDO_NN. Flag NextPoint as "visited" and set CURRENT_POINT to NextPoint. Repeat until all points in the point-set are flagged as "visited." The result ( which depends on the starting point ) is a linestring connecting all points (a "line" is only between 2 points; a linestring is between 2 or more points). This requires PL/SQL.
. . . .(c) Draw Along Shortest Distances: Create a table containing: FromPt_ID, toPt_ID and distances between each pair of points. (If you do this via a cross product, remove rows where FromPt_ID = ToPt_ID.) Begin connecting the points with the minimum distance from the last "visited" point (as before, flag the points that have been used as "visited"). The result of this operation is the shortest linestring connecting your point-set. This requires PL/SQL.
. . . .(d) Outline Set of Points: You could also use the SDO_GEOM.Sdo_ConvexHull function to create polygon that encloses your point set, and then use SDO_UTIL.PolygonToLine to turn that area-geometry into a line-geometry. This can probably be done in a single statement.
. . . .(e) Others (TSP, spanning tree, etc).
Regards,
Noel

How to create Mount Point in Linux

Hi,
I m new to Linux OS, want to install Oracle EBS R12 on OEL 5.6 . I have downloaded s/w and installed all required packages for OEL.
Now i want to create Staging directory at location /u01/StageR12.
Can anyone guide me for how to create Mount point /u01 and how to assign space of 53 GB to it.... ?
Reply awaited...

You're on the right path.
Keep in mind though what you need partition wise just for o/s install. You should have at least 3 partitions:
- a ?? GB partition for the / (root) mount (the size depends on what you will install and how much space you will need for running that s/w)
- a 128MB or larger partition for the /boot mount
- a ?? GB partition as swap space mount (typically rule of thumb is 2x RAM for 4GB and lower, else around 25% of total RAM)
I would not create separate partitions for the old-style +/u01+ mount points for Oracle. That part of the OFA (Oracle Flexible Architecture) standards are old and pre-ASM and pre- automated Oracle managed data files.
You need space for installing an Oracle Home. I do not see the need for a dedicated mount point for that. I use the root file system.
You need space for the actual database. If you use Oracle ASM, then I would create raw partitions (across disks) to be used for database storage. These will not be mounted or formatted. Instead these will be assigned to an ASM diskgroup (and striped by default) and used for database storage.
If you do not use ASM, then you need a cooked file system for storage of database file. In that case separate mount point(s) make sense. Also, it makes sense not to manually apply the old OFA standards, but instead use Oracle managed database files. In that case you need a single mount point (e.g.<i>/oracledb</i>) - and set that as the base directory for Oracle to use for the database. Oracle will create an OFA compliant database directory tree and files under that base directory/mount point.
Keep in mind that the more mount points you have for the database, the more difficult your job becomes to manage storage. The easiest is a single mount point for the database and using Oracle to manage the OFA compliant side for you on that mount point.
Also, you cannot and should not attempt some kind of manual striping layout of the database across multiple mountpoints. This may have made some sense back 10+ years ago. It no longer does.

How to set up a point to point connection in 4 sites

Hi all.
I'm investigating the option of set up a point to point connection around 4 sites.
I will call Site01, Site02, Site03 and Site04.
Site01 will be the main one with a Main Domain Controller.
Site02, Site03 and Site04 will be the Secondary Domain Controllers.
I need to install an VPN Router on each Site to create a full VPN Network, I mean, All the computers should see the other computers.
I need some support about it.
I suppose that I have to config like this:
Site01 with VPNRouter01 will have the IP range 192.168.1.X.
Site02 with VPNRouter02 will have the IP range 192.168.2.X.
Site03 with VPNRouter03 will have the IP range 192.168.3.X.
Site04 with VPNRouter04 will have the IP range 192.168.4.X.
If I config on each VPNRouter 3 point to point VPN connection is the only config that I have to do?
I mean, is not neccesary to config anything else?
I suppose that for example, the client with IP 192.168.1.10 should have the following IP address as well:
192.168.2.10
192.168.3.10
192.168.4.10
Is this neccesary to see all the clients on the remote networks?
Thanks and best regards.

HI,
Try the below
1) Configure site to site vpn from all the three site to the HUB site.
2) Configure ospf or any dynamic routing protocol on the vpn, thus you will have routes of site1, site2 and site3 in site4 and visaversa.
Once you have the connectivity established you can access any computers from any site.

Animation: Same Layer, Multiple Points in Timeline?

Hello everybody,
I have two questions about using the Animation feature in Photoshop...
(1) Is it possible to copy, click and drag an entire set of layers in the timeline? Like, if I want to move a group of layers forward or backward in the timeline, without individually moving each layer?
(2) This one I think might be impossible... is it possible to have the same layer show up at multiple points in the timeline? Like if I want to create an animation which goes through several cycles with only a few layers changing in each cycle? This feature would be really helpful, it'd be a shame if it isn't supported.
Many thanks!
Jason

Select your layer
Select the pen tool (letter g)
Draw the first mask
Set the first mask to subtract
Draw the second mask
Set the second mask to subtract
Repeat as needed
Another option
Add a colored solid to your comp above the layer you want to mask
Change the blend mode of the colored layer to multiply or overlay so you can see through it
Select the colored layer that you can now see through
Select the pen tool or other mask tool
Draw your masks using the underlying layer as a guide
Set the colored layer as an alpha inverted track matte for the layer you wish to mask
To learn how to use mask tools in detail type mask in the Search Help field at the top right corner of AE and follow the links provided for excellent tutorials and instructions.

Unable to load SWC fds.swc:Multiple points ???

Hi,
I downloaded project and integrated in the flex builder ,when
i run MXML file i am getting error following errors :
1)Unable to load SWC fds.swc:Multiple points
2)1017:the definition of base class locale was not found
3)could not resolve <mx:Application> to a component
implementation.
What to do for this ?????
Plzzzzzzzzzz help me...Regarding this..

Hi app_1,
Your SWC might be for SDK 2.0.0 but your Flex Builder might
be 2.0.1.
Jeffrey

How to create restore point in windows server 2008 service pack1

hi i am bhaskar ... how to create restore point in windows server 2008 service pack1 and how to restore system from a restore point in windows server 2008 service pack1.. is this option available or not ? what is the difference between shadow copies and
restore point ? instead of restore point we have this shadow copies option in windows server 2008 ?Bhaskar

AFIK, Restore Points doesn’t exist in Windows 2008.
Volume Shadow Copy option can be used to achieve:
Creating consistent backups of open files and applications
Creating shadow copies for shared folders
Creating transportable shadow copies using a hardware provider — for backup, testing and data mining scenarios
Quickly recovering and restoring files and data
It is more like a file, data, application backup.
Santhosh Sivarajan | MCTS, MCSE (W2K3/W2K/NT4), MCSA (W2K3/W2K/MSG), CCNA, Network+ Houston, TX
Blogs - http://blogs.sivarajan.com/
Articles - http://www.sivarajan.com/publications.html
Twitter: @santhosh_sivara - http://twitter.com/santhosh_sivara
This posting is provided AS IS with no warranties, and confers no rights.

Bug? Can't switch off constraint / snapping when dragging multiple points

Can someone please check this one out:
Summary:
Prefs are set to: Snap Vector Tools and Transforms to Pixel Grid OFF. Constrain path dragging in the options bar is OFF.
If I have a vector path in a document I can drag one selected point freely. If I have two or more points selected transformation is constrained/snapped to the pixel grid.
CS6, Windows 7/64bit.
Expected result:
With settings as above I should be able to drag points without constraint/snapping.
How to reproduce:
Ensure settings are as described above.
Draw ellipse path with the shape tool.
Select and drag one point with the direct selection tool = free dragging
Select and drag multiple points with the direct selection tool = constrained dragging

Thanks for noticing this Mike,
This may have been overlooked, but we notice that it also appears in CS5.
We'll have a look at it.
Thanks again
Pete

Why can't I rotate multiple points in puppet warp at the same time?

You can rotate single points in puppet warp, and you can shift+click to select multiple points and move them at the same time but I see no way to rotate multiple points as one group using puppet warp. This would be a very helpful feature I think should be added.

Please post Bug Reports and Feature Requests over at
http://feedback.photoshop.com/photoshop_family/

How to create watch points in ECC 6.0

Hi Experts,
How to create watch points in ECC 6.0
Thanks.

Dear Kalyan,
The moment the debugger starts, there will be an icon for "Watchpoint" exactly after F5, F6, F7, F8 and a big STOP red button on the application tool bar. Once you click on that Watchpoint button, it will take you to the screen where you need to define the exact field and its relative operator along with the condition to be checked.
Hope this is clear. No navigation needed for this.
-Syed.

Creating multiple point to point connection

Similar Messages

Maybe you are looking for