How to create watch points in ECC 6.0

Hi Experts,
How to create watch points in ECC 6.0
Thanks.

Dear Kalyan,
The moment the debugger starts, there will be an icon for "Watchpoint" exactly after F5, F6, F7, F8 and a big STOP red button on the application tool bar. Once you click on that Watchpoint button, it will take you to the screen where you need to define the exact field and its relative operator along with the condition to be checked.
Hope this is clear. No navigation needed for this.
-Syed.

Similar Messages

How to create a package in ECC 6.0.

Hi,
Can you tell me how to create a package in ECC 6.0 system?
Thanks in advance,
Regards,
Arnab.

Hi,
Thank you for your replies.
Can you tell me the difference and uses of the two types of package I can create from SE21.
i.e. : Package and package interface. any sap link would also be helpful. I need to know where i can use what and what would be helpful for my case.
Regards,
Arnab.

How to create restore point in windows server 2008 service pack1

hi i am bhaskar ... how to create restore point in windows server 2008 service pack1 and how to restore system from a restore point in windows server 2008 service pack1.. is this option available or not ? what is the difference between shadow copies and
restore point ? instead of restore point we have this shadow copies option in windows server 2008 ?Bhaskar

AFIK, Restore Points doesn’t exist in Windows 2008.
Volume Shadow Copy option can be used to achieve:
Creating consistent backups of open files and applications
Creating shadow copies for shared folders
Creating transportable shadow copies using a hardware provider — for backup, testing and data mining scenarios
Quickly recovering and restoring files and data
It is more like a file, data, application backup.
Santhosh Sivarajan | MCTS, MCSE (W2K3/W2K/NT4), MCSA (W2K3/W2K/MSG), CCNA, Network+ Houston, TX
Blogs - http://blogs.sivarajan.com/
Articles - http://www.sivarajan.com/publications.html
Twitter: @santhosh_sivara - http://twitter.com/santhosh_sivara
This posting is provided AS IS with no warranties, and confers no rights.

How to create Mount Point in Linux

Hi,
I m new to Linux OS, want to install Oracle EBS R12 on OEL 5.6 . I have downloaded s/w and installed all required packages for OEL.
Now i want to create Staging directory at location /u01/StageR12.
Can anyone guide me for how to create Mount point /u01 and how to assign space of 53 GB to it.... ?
Reply awaited...

You're on the right path.
Keep in mind though what you need partition wise just for o/s install. You should have at least 3 partitions:
- a ?? GB partition for the / (root) mount (the size depends on what you will install and how much space you will need for running that s/w)
- a 128MB or larger partition for the /boot mount
- a ?? GB partition as swap space mount (typically rule of thumb is 2x RAM for 4GB and lower, else around 25% of total RAM)
I would not create separate partitions for the old-style +/u01+ mount points for Oracle. That part of the OFA (Oracle Flexible Architecture) standards are old and pre-ASM and pre- automated Oracle managed data files.
You need space for installing an Oracle Home. I do not see the need for a dedicated mount point for that. I use the root file system.
You need space for the actual database. If you use Oracle ASM, then I would create raw partitions (across disks) to be used for database storage. These will not be mounted or formatted. Instead these will be assigned to an ASM diskgroup (and striped by default) and used for database storage.
If you do not use ASM, then you need a cooked file system for storage of database file. In that case separate mount point(s) make sense. Also, it makes sense not to manually apply the old OFA standards, but instead use Oracle managed database files. In that case you need a single mount point (e.g.<i>/oracledb</i>) - and set that as the base directory for Oracle to use for the database. Oracle will create an OFA compliant database directory tree and files under that base directory/mount point.
Keep in mind that the more mount points you have for the database, the more difficult your job becomes to manage storage. The easiest is a single mount point for the database and using Oracle to manage the OFA compliant side for you on that mount point.
Also, you cannot and should not attempt some kind of manual striping layout of the database across multiple mountpoints. This may have made some sense back 10+ years ago. It no longer does.

How to create User Exits in ECC 6

Hi Experts,
good day, i'm looking for any notes or learning materials on how to create User Exits in ECC 6. please send me the links.
thanks you for your usual support.

Hello,
For information on Exits, check these links
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sapgenie.com/abap/code/abap26.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
http://www.easymarketplace.de/userexit.php
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sappoint.com/abap/userexit.pdfUser-Exit
Any Basics u wana know abt Enhancements.,.,go through the link.,
http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/frameset.htm
Thanks,
Swati

How to create Entry Point to pcd repository?

Hi,
I am unable to see the iviews to drag and drop on the web page in Web page composer.
I tried to create static entry point to PCD repository.
But I can't the PCD folders.
How do I configure this?
Thanks
Thruna Shanmuga

Hi Vishal,
Thanks for your replies.
I am able to see the my folder
in Content Administration -> KM Content ->
pcd>portal content>Test
In the property i set the following value.
displaymode=select,maxproviderprio=30,entriesperrow=5,entrypointsprefix=/entrypoints,
sharedcontent=/wpccontent/Cross-Site Content;/documents/MyFolder;/pcd/Test
When I tried to create entry point in Web Page Composer, I click the browse to find the Test folder.
I can't see the Test folder.
How do I create entry point for the Test folder?
Thanks
Thruna Shanmuga
Thanks
Thruna Shanmuga
Edited by: Thruna Shanmuga on Apr 6, 2009 10:34 PM
Edited by: Thruna Shanmuga on Apr 6, 2009 10:42 PM
Edited by: Thruna Shanmuga on Apr 6, 2009 10:42 PM

How to create bullet points in BoilerPlate 'Text' item...

Hi,
I have a requirement of generating a form. In that form there is a static section which contains bullet points. Is there a way to create bullet point in oracle reports.
I am using paper layout. As output is required in PDF format.
Thanks

Hi Arshad
You may try this trick to introduce bullet character in Reports on Windows platform:
For Boilerplates:
In Application such as Wordpad, hold Alt and press 0149 on numeric pad. This will insert a bullet mark in the editor. Copy this text and paste it in Reports Paper Layout.
For Fields:
Create a formula column (Character type) in the same group as the column that you need to bullet. Return the following result:
return '� ' || :<your_column>;
All the values based on this Formula column will display a Bullet mark.
Hope this helps.
p.s. character 149 is bullet character in most fonts.
Regards
Sripathy

How to Create Certificate at the ECC 6.0 ( Trusting System ) in STRUSTSSO2

Hi Experts,
We are in the process of setting up Log On Ticket Based SSO Back End Connectivity from Portal to ECC 6.0 .
But, in STRUSSO2 when I try to Export the Certificate it has text file cert. And this cert is not
being accepted by Portal side i.e. at keystore Page while I try to import this Cert there , it say that
invalid Cert . Beside this, .der and .pse ..which one we need to use ?
So, I need to create first the Cert at the ECC side so that I can export and then import at the Portal.
How do I create Cert in STRUSSO2 at the ECC Side ?
Also, do I need to create the RFC JCo destination at the Portal side ? Or Just the User Mapping at the Portal side is enough .
Any / ALL Help is most welcome and would sure, be rewarded with appropriate point in addition to the
sincere appreciation of your time and help in the matter.
Thanks,
Regards,
- Ishan

Hello. You need to export sertificate in "binary" mode, from MENU --> Certificate --> export. Read for example http://help.sap.com/saphelp_nw70/helpdata/EN/fa/741a403233dd5fe10000000a155106/frameset.htm
I'ts about BW but the same sense.
P.S. you say "SSO Back End Connectivity from Portal to ECC 6.0" ,you need to create iViews in portal and see the ECC pages? For this you need to export Certificate from "Portal" and import in ECC ,and add in ACL in required client. Export from portal : System Configuration --> system administration --> keystore administration --> export verify.der
Read :
http://help.sap.com/saphelp_nw70/helpdata/EN/0a/a354426fdeb430e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/EN/78/f1a8490e7011d6999500508b6b8a93/frameset.htm
Regards.
Edited by: Sergo Beradze on Jul 13, 2008 2:41 PM

How to create crystal reports from ecc abap program?

Hi all,
I am new to sap ecc to bo report!!
I heard that abap program cannot be directly connected to crystal reports,
So created a function module which is equivalent to the abap program!!
And happened to connect the same in crystal !!
Can anyone let me know how to proceed !!
will be there any performance issue ?
can anyone guide me how to do reporting from ecc function module to crystal reports directly?
Thanks

Hi Pooja,
From what I know, not all ABAP programs can be accessed in Crystal Reports. The program should return rows and columns, otherwise, CR would not be able to report off it.
I'm not sure if there are any performance issues if we follow your path. Do you experience any?
And, do you need help in creating a report on the function module, I mean do you also have any design related queries?
-Abhilash

How to create RFC Destination Between ECC 6.0 and BI 7.0

HI,
My name is balu working in gucons,i was trying to create RFC between ECC 6.0 and BI 7.0,i have tried with the help of some documents but iam unable to do that,Iam very helpfull if you give a clear description regarding this problem.
Thank you,
Regards,
BALU.

Hi Balu
the error screen is from your BI system? If yes, then why the source system is showing to be of type BI? For ECC it should be of type r/3.
You can try to delete already created RFC from both your BI and ECC system and try to create source system connection from your BI end from RSA1>> Source System> right click..Create..
Choose "Automatically Create SAP system" . Enter the required credential then click on "Replicate as well"
If you do not want to delete any RFC for any reason please upload entries from RSBASIDOC, RSLOGSYST table.

How to create mount point from external drive directory

Hi,
Is it possible to create a mount point pointing directly to an external drive directory?
For example I would like to have /Volumes/Media point to my external eSATA drive /eSATA/Media
What I am trying to achieve is that I can see a virtual drive in Finder called "Media"
This is important because when this external drive is connected on my NAS Server the /eSATA/Media directory
shows up as a mounted drive called "Media" alse (through afp).
What I want is to see "Media" pointinf to /eSATA/Media regardles if it is connected directly to my MacBook or connected on my NAS.
Thanks for your help.
JM

Hi,
Is it possible to create a mount point pointing directly to an external drive directory?
For example I would like to have /Volumes/Media point to my external eSATA drive /eSATA/Media
What I am trying to achieve is that I can see a virtual drive in Finder called "Media"
This is important because when this external drive is connected on my NAS Server the /eSATA/Media directory
shows up as a mounted drive called "Media" alse (through afp).
What I want is to see "Media" pointinf to /eSATA/Media regardles if it is connected directly to my MacBook or connected on my NAS.
Thanks for your help.
JM

How to create complaints with reference to ECC Billing document (CRM 7.0)

Hi experts!
I use ECC 6.0 and CRM 7.0.
I have to create CRM complaints (ZCLR - CLRP) with reference to ecc billing documents.
I read the following topics and help:
1. How to create complaints with referenceto ECC Billing document
2. Re: How can we transfer billing documents from SAP ERP to CRM 2007?
3. http://help.sap.com/saphelp_crm70/helpdata/en/46/029ba32e675c1ae10000000a1553f6/frameset.htm
Made these settings:
1. Define the Business object type
Goto SPRO>CRM>Transaction>Settings for Complaints>Integration>Trnsaction Referencing>Define Object types for Transaction reference
2. Assign Business Object Types to Transaction Types
Goto SPRO>CRM>Transaction>Settings for Complaints>Integration>Trnsaction Referencing>Assign Business Object Types to Transaction Types
3. Implement a BADI - CRM_COPY_BADI_EXTERN.Check Implementation CRM_COPY_BADI_BILLDO for more information on the coding for referencing the ECC Billing document.
Goto SPRO>CRM>Transaction>Settings for Complaints>Integration>Trnsaction Referencing>BAdI: Create Complaint with Reference to External Transaction.
but still do not know,
1) if I should pre-replicate billing documents into CRM ?
2) Or, the system uses the RFC to find these documents in ECC to create reference?
Please help me.
Best regards Kostya.
Edited by: Kostya Khveshchenik on Oct 20, 2010 2:09 PM

not resolved =(
Edited by: Kostya Khveshchenik on Nov 19, 2010 8:50 AM

Watch points

Hi all,
I know that there are two ways of debugging in ABAP. One is setting the breakpoints and the other is watchpoint.Can anyone please explain me what is watch point, what is the need of going for that when we have debugging option, And how to work with watch point ? what is the difference between local and global watch point.
Regards,
Varun.

Hi Varun,
watch points are used explicitly to stop for a particular record with some value.
say i have 10000 records , i am looping that itab, i cannot say F5 , to see for a particular record, in that case we will create watch point on itab-field which is equal to some value , when you say F8, then it will stay exactly that particular record.
it will save the debugging time.
for more info read this SAP help ..
http://help.sap.com/saphelp_webas610/helpdata/en/c6/617ce2e68c11d2b2ab080009b43351/content.htm
regards
vijay

Creating Client 800 For ECC 6.0

Hi,
I have installed ECC 6.0 IDES in my PC,i able use 001 client with DDIC user name but iam unable to open 800 client.
Can you please tell me how to create client 800 in ECC.
Thanks in Advance,
Regards,
Balu.

Hi
As you said client 800 is already created in defult
Tcode SCC4 check whether you have 800 client entry there,if you have then try to login with to 800 with sap/pass if it doesn't work then you need to delete sap and so that it will be recreated and you can login with sap*/pass
Login to the SQL prompt and execute the following command.
sqlplus"/as sysdba"
sql>delete from sapsr3.usr02 where mandt='800' and BNAME="SAP*";
where,
SAPSR3 is the schema.
mandt is the client
Bname is the user name
You also need to check parameter login/no_automatic_user_sapstar is set to 0 so you can logon as SAP* password pass,you can find this parameter at /usr/sap/SID/SYS/profiles in Default profile or Instance profile
als chek the below links
http://www.sap-img.com/basis/changing-the-default-password-for-sap-user.htm
http://www.sap-basis-abap.com/bc/forgot-password-for-user-id-sap-in-client-000.htm
http://help.sap.com/saphelp_45b/helpdata/en/52/671792439b11d1896f0000e8322d00/content.htm
Regards
Uday

Watch Point

Hi Experts,
Can any one explain me about Watch Points ?
What are the differences between debugger and watch points ?
Can any one explain me how to use watch points with any sample program, if provided with screen shots. I will give full points if any one explain with sample program with screen shots.
Pls send me to [email protected]
Thanks in Advance
Regards and Thanks
Vijaya

Hi vijaya,
check the below links for watch points
Setting Watchpoints
http://help.sap.com/saphelp_erp2005/helpdata/en/c6/617cdce68c11d2b2ab080009b43351/frameset.htm
Changing Watchpoints
http://help.sap.com/saphelp_erp2005/helpdata/en/c6/617ce2e68c11d2b2ab080009b43351/frameset.htm
Watchpoint with the new debugger 5.0
Go through these threads for more information on debugging,
1) debugging
2) debugging
3) Debugging
4) Debugging
some more links .....
Introduction: http://www.saplinks.net/index.php?option=com_content&task=view&id=24&Itemid=34
A PDF file to know knowledge about Debugging
Some more links:
http://www.sap-basis-abap.com/sapab002.htm
Debug Background Programs: http://www.sapdevelopment.co.uk/tips/debug/debug_backjob.htm
Debugger: http://help.sap.com/saphelp_nw2004s/helpdata/en/c6/617ca9e68c11d2b2ab080009b43351/content.htm
If you need futher information plz do let me know
~~Guduri

How to create watch points in ECC 6.0

Similar Messages

Maybe you are looking for