Creating Name Badges with ID

I can't figure out how to make name badges. I can get a whole page of each name, but I want one name per badge (Avery 8395). I realize there is a check box for multiple records per page. I downloaded an ID a template for my labels but that doesn't help with the multiple names per page problem I'm having. Do I actually have to get out a ruler and figure out how far to move each new name badge? Perhaps I should just stick with Word (although I can't get a logo to print that way.)

Forget the template unless you are able to remove all but the upper left badge from it.
When you do multiple records per page you set up one instance of the badge in the upper left and leave the rest of the page blank. ID duplicates everything on the page as many times as will fit according to the spacing options you set. It's very imprtant, therefor, to get your measurements precise and to not have any stray bits outside the badge area.
Peter

Similar Messages

How to create a name badge with Avery product 5390

How can I create name badges using Avery product 5390 with my Mac?

Roberta,
See my previous post. Also see More Like This on the right side of the page.

Temporary tables are getting created, name starting with BIN$.....

Hi,
I am using Oracle 10.2 and am experiencing an issue that doing some operations on existing tables, some temporary tables are getting created starting with BIN$.
For ex: BIN$HULdSlmnRZmbCXAl/pkA9w==$0
But I dont see these tables in the database after two or three days. I found that these temporary tables are a replica of existing tables and these contain only the table structure but not the data. I even not able to drop them from database.
Can anyone throw some pointers on this?
Thanks and Regards,
Siva

These tables are in the Oracle recycle bin. When you drop a table, Oracle just renames it to BIN$xxx so that you can undrop the table if you made a mistake.
- You can ignore tables in the recycle bin if you would like. Oracle will automatically purge them when it needs the space.
- You can prevent a table from going in to the recycle bin by adding the purge command to the drop, i.e.
DROP TABLE table_name PURGE- You can empty out the recycle bin using the command
SQL> purge dba_recyclebin(or just recyclebin if you only want to clear out the objects you own from the recyclebin).
Justin

How to create two employees with same name as supplier record?

Dear all,
We need to create a supplier record for an employee so that we can issue invoice for pretty cash payment. If there are 2 employees with same name, how can we create supplier records for these 2 employees? The system does not allow duplicate supplier name.
Please advise.
Regards,
HY

Hello,
In R12 it is possible to create 2 employee with same name but different employee number.
And also possible to create these 2 employees as suppliers in Payables.
HTH,
Vik

How to create a dll with strong name

Hi All,
For some security purpose, I need to create a dll with strong name by packaging the bean. I am able to create a dll from the bean but how do I create a strong name(sign) dll? I tried using jarsigner utility to sign the jar and then convert it into dll using packager utility but still the resulting dll is not signed. Please anyone let me know how can generate a signed dll by packaging my bean. Any suggestion/help is most welcome. Thanks in advance.

Good information on strong names:
http://www.ondotnet.com/pub/a/dotnet/2003/04/28/strongnaming.html
Step-by-step procedure:
1. Download Signer from Codeplex. No installation is necessary.
2. Backup your unsigned assemblies
3. Open the Visual Studio Command prompt or otherwise make sure that your PATH includes the .NET SDK binaries, and change to the directory where your assemblies are located
4. In a command window, execute:
PATH_TO_SIGNER.EXE\signer -k FILENAME OF YOUR KEY -outdir TARGET DIR -a YOUR DLL
5. The resulting assemblies should now have a valid strong name from your company key. You can check this with:
sn -T YOUR DLL
The public key token must match the token of your public key.
BTW - this is totally unrelated to Java Programming.

Is it possible to create a Synonym with different column names

Hi,
I want to create a Synonym with different columns names (Columns not in original table) . I am not sure if this can be done . Any suggessions...
Thanks in advance....

Synonyms are not limited to tables. Accroding to the SQL Reference, a synonym is:
an alternative name for a table, view, sequence, procedure, stored function, package, materialized view, Java class schema object, user-defined object type, or another synonym.
In fact, synonyms are not even validated until they are used:
SQL> create synonym my_synonym for table_which_does_not_exist;
Synonym created
SQL> select * from my_synonym;
select * from my_synonym
ORA-00980: synonym translation is no longer valid

To create multiple files with same content but with different names

Hi SapAll.
here i have got a tricky situation on Idoc to File Scenario.
in my interface of an Idoc to file ,there is requirement to create multiple files with different file names but with same content based on one Idoc Segment.
which means there will be one Zsegment with two fields in the idoc,where one field with (content refers to the name which file name should start with .so lets say if this segment is repeated for 3 times then PI should create 3 files in the same directory with same content but with different file names (from the filed).
so here for now iam using one reciever file communication channel.
can any body give me the quick answer.
regards.
Varma

What do you mean by different names?
when i make proper setting in the Receiver Channel....on how to create the filename (what to append) like add Timestamp, counter, date, messageid.....even in this case you will ahve file with different names and that too from same File channel.
You can perform multi-mapping in XI/ PI and then your File channel will place the files in the target folder with relevant names. You cannot use Dynamic Configuration with Multi-Mapping!
If you intend to use different File channels, then do the configuration as required (normal)...even over here you can follow multi-mapping.
Do not use a BPM!
Regards,
Abhishek.

How To Create Table View With Same Column name But Different Table?

Hi All,
I have the problem to create a tableview with same column name but in different table.
The Table that i have:-
Table - PAC051MPROFORMA
Column - mrn,visitid
Table - PAC051TPROFORMA
Column - mrn,visitid
Table - PAC052MTRANSBILL
Column - mrn,visitid
Then i want to create a table view to view that table. This is my SQL
CREATE VIEW pacviewproforma (mrn,visitid,mrn,visitid,mrn,visitid)
As Select PAC051MPROFORMA.mrn,PAC051MPROFORMA.visitid,PAC051TPROFORMA.mrn,PAC051TPROFORMA.visitid,PAC052MTRANSBILL.mrn,PAC052MTRANSBILL.visitid
where
*(a.PAC051MPROFORMA.mrn=PAC051TPROFORMA.mrn)*
and
*(a.PAC051TPROFORMA.mrn=PAC052TRANSBILL.mrn)*
That SQL Return this error = ORA-00957: duplicate column name
Then I modify that SQL to
CREATE VIEW pacviewproforma (mrn,visitid)
As Select PAC051MPROFORMA.mrn,PAC051MPROFORMA.visitid,PAC051TPROFORMA.mrn,PAC051TPROFORMA.visitid,PAC052MTRANSBILL.mrn,PAC052MTRANSBILL.visitid
where
*(a.PAC051MPROFORMA.mrn=PAC051TPROFORMA.mrn)*
and
*(a.PAC051TPROFORMA.mrn=PAC052TRANSBILL.mrn)*
This time this error return = ORA-01730: invalid number of column names specified
What should i do?
Thanks...

Hi,
SQL> CREATE VIEW pacviewproforma (mrn,visitid,mrn,visitid,mrn,visitid)
2 As Select
3 PAC051MPROFORMA.mrn,
4 PAC051MPROFORMA.visitid,
5 PAC051TPROFORMA.mrn,
6 PAC051TPROFORMA.visitid,
7 PAC052MTRANSBILL.mrn,
8 PAC052MTRANSBILL.visitid
9 from PAC051MPROFORMA,PAC051TPROFORMA,PAC052MTRANSBILL
10 where
11 (PAC051MPROFORMA.mrn=PAC051TPROFORMA.mrn)
12 and
13 (PAC051TPROFORMA.mrn=PAC052MTRANSBILL.mrn);
CREATE VIEW pacviewproforma (mrn,visitid,mrn,visitid,mrn,visitid)
ERROR at line 1:
ORA-00957: duplicate column namePlease give different names to each column.
Something like this..
SQL> CREATE OR REPLACE VIEW pacviewproforma (MPROFORMA_mrn,MPROFORMA_visitid,TPROFORMA_mrn,TPROFORMA
_visitid,MTRANSBILL_mrn,MTRANSBILL_visitid)
2 As Select
3 PAC051MPROFORMA.mrn,
4 PAC051MPROFORMA.visitid,
5 PAC051TPROFORMA.mrn,
6 PAC051TPROFORMA.visitid,
7 PAC052MTRANSBILL.mrn,
8 PAC052MTRANSBILL.visitid
9 from PAC051MPROFORMA,PAC051TPROFORMA,PAC052MTRANSBILL
10 where
11 (PAC051MPROFORMA.mrn=PAC051TPROFORMA.mrn)
12 and
13 (PAC051TPROFORMA.mrn=PAC052MTRANSBILL.mrn);
View created.
SQL> DESC pacviewproforma;
Name                                      Null?    Type
MPROFORMA_MRN                                      NUMBER
MPROFORMA_VISITID                                  NUMBER
TPROFORMA_MRN                                      NUMBER
TPROFORMA_VISITID                                  NUMBER
MTRANSBILL_MRN                                     NUMBER
MTRANSBILL_VISITID                                 NUMBER
ORA-01730: invalid number of column names specifiedThe list of column nmae you specified during the CREATE VIEW should match with the SELECT list of the view.
Twinkle

Can we create the Application name starting with Numerics

Hi All,
can we create an application name stating with number like 1234Samsung.
Also can we use the special characters between them.
Also are there any rules for creating database names other than maximum 8 characters limit.
Regards

Hi,
1. You can create starting with numerics, 123samsu.
2. samsung cannot complete ,the know reason is exceeding 8
Sandeep Reddy Enti
HCC
http://hyperionconsultancy.com/

I want to create an ALV with two row fields name

Hi
I want to create an ALV with two row fields name. please suggest how to do it or send some sample code
thanks

Hi,
see this link
http://****************/Tutorials/ALV/ALVMainPage.htm
http://www.alvrobot.com.ar/tutorial.php
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b09ac4d5-e3ad-2910-6a81-96d1b861928c
http://abapprogramming.blogspot.com/2007/11/alv-check-boxes-sample-code.html
REPORT zalv5 NO STANDARD PAGE HEADING.
Description----
TOPICS INTRODUCED:
1. Learn about the u2018Standardu2019 PF-Status that comes as default.
2. Exclude function codes from u2018Standardu2019 PF-Status and customize it.
TYPE-POOLS: slis.
DATA: BEGIN OF i_data OCCURS 0,
qmnum LIKE qmel-qmnum,
qmart LIKE qmel-qmart,
qmtxt LIKE qmel-qmtxt,
ws_row TYPE i,
ws_char(5) TYPE c,
chk,
END OF i_data.
DATA: report_id LIKE sy-repid.
DATA: ws_title TYPE lvc_title VALUE 'An ALV Report'.
DATA: i_layout TYPE slis_layout_alv.
DATA: i_fieldcat TYPE slis_t_fieldcat_alv.
DATA: i_events TYPE slis_t_event.
DATA: i_header TYPE slis_t_listheader.
DATA: i_extab TYPE slis_t_extab.
SELECT qmnum
qmart
qmtxt
INTO TABLE i_data
FROM qmel
WHERE qmnum <= '00030000010'. LOOP AT i_data. i_data-ws_row = sy-tabix. i_data-ws_char = 'AAAAA'. MODIFY i_data. ENDLOOP. report_id = sy-repid. PERFORM f1000_layout_init CHANGING i_layout. PERFORM f2000_fieldcat_init CHANGING i_fieldcat. PERFORM f3000_build_header CHANGING i_header. PERFORM f4000_events_init CHANGING i_events. CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY' EXPORTING * I_INTERFACE_CHECK = ' ' * I_BYPASSING_BUFFER = * I_BUFFER_ACTIVE = ' ' i_callback_program = report_id * I_CALLBACK_PF_STATUS_SET = ' ' * I_CALLBACK_USER_COMMAND = ' ' * I_CALLBACK_TOP_OF_PAGE = ' ' * I_CALLBACK_HTML_TOP_OF_PAGE = ' ' * I_CALLBACK_HTML_END_OF_LIST = ' ' * i_structure_name = ' ' * I_BACKGROUND_ID = ' ' i_grid_title = ws_title * I_GRID_SETTINGS = is_layout = i_layout it_fieldcat = i_fieldcat * IT_EXCLUDING = * IT_SPECIAL_GROUPS = * IT_SORT = * IT_FILTER = * IS_SEL_HIDE = * I_DEFAULT = 'X' i_save = 'A' * IS_VARIANT = it_events = i_events * IT_EVENT_EXIT = * IS_PRINT = * IS_REPREP_ID = * I_SCREEN_START_COLUMN = 0 * I_SCREEN_START_LINE = 0 * I_SCREEN_END_COLUMN = 0 * I_SCREEN_END_LINE = 0 * IT_ALV_GRAPHICS = * IT_ADD_FIELDCAT = * IT_HYPERLINK = * IMPORTING * E_EXIT_CAUSED_BY_CALLER = * ES_EXIT_CAUSED_BY_USER = TABLES t_outtab = i_data EXCEPTIONS program_error = 1 OTHERS = 2 . IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
*& Form F1000_Layout_Init
FORM f1000_layout_init USING i_layout TYPE slis_layout_alv.
CLEAR i_layout.
i_layout-colwidth_optimize = 'X'.
i_layout-edit = 'X'.
ENDFORM. " F1000_Layout_Init
*& Form f2000_fieldcat_init
FORM f2000_fieldcat_init CHANGING i_fieldcat TYPE slis_t_fieldcat_alv.
DATA: line_fieldcat TYPE slis_fieldcat_alv.
CLEAR line_fieldcat.
line_fieldcat-fieldname = 'QMNUM'. " The field name and the table
line_fieldcat-tabname = 'I_DATA'. " name are the two minimum req.
line_fieldcat-key = 'X'. " Specifies the column as a key (Blue)
line_fieldcat-seltext_m = 'Notification No.'. " Column Header
APPEND line_fieldcat TO i_fieldcat.
CLEAR line_fieldcat.
line_fieldcat-fieldname = 'QMART'.
line_fieldcat-ref_tabname = 'I_DATA'.
line_fieldcat-hotspot = 'X'. " Shows the field as a hotspot.
line_fieldcat-seltext_m = 'Notif Type'.
APPEND line_fieldcat TO i_fieldcat.
CLEAR line_fieldcat.
line_fieldcat-fieldname = 'QMTXT'.
line_fieldcat-tabname = 'I_DATA'.
line_fieldcat-seltext_m = 'Description'.
APPEND line_fieldcat TO i_fieldcat.
CLEAR line_fieldcat.
line_fieldcat-fieldname = 'WS_ROW'.
line_fieldcat-tabname = 'I_DATA'.
line_fieldcat-seltext_m = 'Row Number'.
APPEND line_fieldcat TO i_fieldcat.
CLEAR line_fieldcat.
line_fieldcat-fieldname = 'WS_CHAR'.
line_fieldcat-tabname = 'I_DATA'.
line_fieldcat-seltext_l = 'Test Character Field'.
line_fieldcat-datatype = 'CHAR'.
line_fieldcat-outputlen = '15'. " You can specify the width of a
APPEND line_fieldcat TO i_fieldcat. " column.
CLEAR line_fieldcat.
line_fieldcat-fieldname = 'CHK'.
line_fieldcat-tabname = 'I_DATA'.
line_fieldcat-seltext_l = 'Checkbox'.
line_fieldcat-checkbox = 'X'. " Display this field as a checkbox
line_fieldcat-edit = 'X'. " This option ensures that you can
" edit the checkbox. Else it will
" be protected.
APPEND line_fieldcat TO i_fieldcat.
ENDFORM. " f2000_fieldcat_init
*& Form f3000_build_header
FORM f3000_build_header USING i_header TYPE slis_t_listheader.
DATA: gs_line TYPE slis_listheader.
CLEAR gs_line.
gs_line-typ = 'H'.
gs_line-info = 'This is line of type HEADER'.
APPEND gs_line TO i_header.
CLEAR gs_line.
gs_line-typ = 'S'.
gs_line-key = 'STATUS 1'.
gs_line-info = 'This is line of type STATUS'.
APPEND gs_line TO i_header.
gs_line-key = 'STATUS 2'.
gs_line-info = 'This is also line of type STATUS'.
APPEND gs_line TO i_header.
CLEAR gs_line.
gs_line-typ = 'A'.
gs_line-info = 'This is line of type ACTION'.
APPEND gs_line TO i_header.
ENDFORM. " f3000_build_header
*& Form f4000_events_init
FORM f4000_events_init CHANGING i_events TYPE slis_t_event.
DATA: line_event TYPE slis_alv_event.
CLEAR line_event.
line_event-name = 'TOP_OF_PAGE'.
line_event-form = 'F4100_TOP_OF_PAGE'.
APPEND line_event TO i_events.
CLEAR line_event.
line_event-name = 'PF_STATUS_SET'.
line_event-form = 'F4200_PF_STATUS_SET'.
APPEND line_event TO i_events.
ENDFORM. " f3000_events_init
FORM F4100_TOP_OF_PAGE *
FORM f4100_top_of_page.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = i_header.
ENDFORM.
FORM F4200_PF_STATUS_SET *
FORM f4200_pf_status_set USING i_extab TYPE slis_t_extab.
REFRESH i_extab.
PERFORM f4210_exclude_fcodes CHANGING i_extab.
SET PF-STATUS 'STANDARD' OF PROGRAM 'SAPLSALV' EXCLUDING i_extab.
ENDFORM.
*& Form f4210_exclude_fcodes
FORM f4210_exclude_fcodes USING i_extab TYPE slis_t_extab.
DATA: ws_fcode TYPE slis_extab.
CLEAR ws_fcode.
ws_fcode = '&EB9'. " Call up Report.
APPEND ws_fcode TO i_extab.
ws_fcode = '&ABC'. " ABC Analysis.
APPEND ws_fcode TO i_extab.
ws_fcode = '&NFO'. " Info Select.
APPEND ws_fcode TO i_extab.
ws_fcode = '&LFO'. " Information.
APPEND ws_fcode TO i_extab.
ENDFORM. " f4210_exclude_fcodes
thanks
karthik
reward me if usefull

Unable to create the type with the name 'MSORA'. (Microsoft.SqlServer.ManagedDTS)

I am attempting to use the Integration Services Import Project Wizard within Microsoft Visual Studio and am getting this error
Unable to create the type with the name 'MSORA'. (Microsoft.SqlServer.ManagedDTS)
upon Import.
Can anyone shed some light for me on this cryptique error message?
Thanks for your review and am hopeful for a reply.

If you have the SSIS and SSDT (BIDS) installed then
I believe the DTS assemblies got derigistered, a typical outcome of corrupted software, so a full re-install would be the best option. VS +SQL Server + more
Otherwise, as a quick fix try to
reference the SSIS assemblies, like Microsoft.SQLServer.ManagedDTS.dll + more.
They are by default in C:\Program Files\Microsoft SQL Server\<number>\SDK\Assemblies.
Arthur
MyBlog
Twitter

Unable to create the type with the name 'ODATA'

On a test server with VS 2012 and SQL 2012 installed, I have created an SSIS project in project deployment mode. In the packages of the project I use the Odata source for SSIS. The packages run fine in VS 2012. But when I deploy the package to the Integration
Services catalog on the same server as where I am running VS 2012 I get a deployment error:
‘Failed to deploy project. For more information, query the operation_messages view for the operation identifier '25084'. (Microsoft SQL Server, Error: 27203)'
When I read this message from the SSISDB database, I see the problem with ODATA.
use SSISDB
go
select * from catalog.operation_messages where operation_id = 25084
--Failed to deploy the project. Fix the problems and try again later.:Unable to create the type with the name 'ODATA'.
As I said: the packages with the Odata run without error when tested from within VS2012 on the SAME server. When I deploy the project from Visual Studio I get the error.
For completeness: I have also tried deployment from VS2012 to another server where the SSIS Odata source has bene deployed. Also to no avail.
Jan D'Hondt - SQL server BI development

The next possiblity for me was to convert the project to Package deployment and see what the result I get. I have converted my project with package connections from project deployment to Package deployment. Then I deployed the package on the server in MSDB
catalog from SSIS. I.e. I connect with SSMS to Integration Services as an administrator and under the MSDB folder I added a new folder for my package. I then imported the dtsx into the mdsb package store. The Import worked. Still from within SSMS and connected
to the Integration Services, i right-clicked on the package in the MSDB store and selected 'Run package'. In the Execute Package dialog window, I clicked on 'Execute' and the package actually ran. The Odata connector was opened, it read the data and imported
into my database.
This experience made me realize what the real culprit was: The OData connector is a 32-bit connector in SQL Server 2012.
To prove this: with SSMS I connected to the SQL database server and in the Integration services catalog, i right-clicked on the package that was deployed in Project deployment mode, then selected 'Execute...'. In the execute dialog windo in the 'Advanced'
tab I checked 32-bit runtime. And the package ran.
To wrap it all up:
The Project deployment will work, but not with the Odata source as project connection. The Odata connection must be defined in each package as a package connection.
Run the deployed packages in 32-bit mode on the server
Jan D'Hondt - SQL server BI development

How to create logical directories with same name on two databases

Hi,
OS: Windows
Oracle Version : 10g
I have to databases in one oracle home. I have created some logical directories in one database. When I am trying to create logical directories with same name in another database, it is overwriting the first database directory paths with the second one
Can't we create directories with same name but different path in two databases on one machine?
Pls suggest me on this
Regards,
Vijay

I am trying to create logical directory using CREATE
DIRECTORY statement. I am very much aware that the
create directory statement doesn't create directory
on OS. But we can attach the physical directory on OS
to logical directory in oracle
My requirement is to create logical directories in
oracle mapping the OS directories. Both the
databases, wil have same logical directory names but
different OS directory mappingsIf I understand you correctly, you can do this:
On DB 1
CREATE OR REPLACE DIRECTORY same_dir_name as 'C:\myoracle\mydir1';
On DB 2
CREATE OR REPLACE DIRECTORY same_dir_name as 'D:\myoracle\mydir2';
What stops you from doing that ?
Note: If what you have is one database but different connections, then you are connecting to one database. The above second statement will drop and replace with the first one

Create n tables with different number names

Hi guys, I work with SQL Server 2008 and OS Windows Server 2008 R2 64 bits. I have to create 10 tables with different names e.g. 'Image1', 'Image2', and so on. For this goal, I use a loop and concatenation. Here is the code:
DECLARE @i INT
DECLARE @v_table_n CHAR
SET @i=1
SET @v_table_n='Image'
WHILE (@i<=10)
BEGIN
    DECLARE @STR VARCHAR(100)
       SET @STR = 'CREATE TABLE SQL_DB_Filestream.dbo.Image1' + @v_table_n + CAST(@i AS VARCHAR(10)) + ' (
   [ID_RowFeatVec] INTEGER NOT NULL PRIMARY KEY,
       [CF1] FLOAT,
   [CF2] FLOAT,
       [CF3] FLOAT
       EXECUTE @STR
    SET @i = @i + 1;
END
GO
As a result, an error message appears:
"The name 'CREATE TABLE SQL_DB_Filestream.dbo.Image1I1 (
    [ID_RowFeatVec] INTEGER NOT NULL PRIMARY KEY' is not a valid identifier."
I have tried a lot of versions but it doesn't work.
What am I doing wrong?
Best wishes
SV_proj

>> I have to create 10 tables with different names e.g. 'Image1', 'Image2', and so on. For this goal, I use a loop and concatenation. Here is the code: <<
1) An SQL Programmer would write ten CREATE TABLE statements. Are you old enough to know about Rube Goldberg? He was a cartoonist who invented inanely complex device for simple task!
2) Ten identical tables is a huge design flaw. It is so awful I want to use it in one of my books. Tables are sets. A set is completed whole, or as Cantor said “a many that is treated as a one” (it sounds cool in German or Esperanto).
3) We hate loops in SQL. This is a declarative language. I will bet you have no idea what that means.
What you want to do is mimic a magnetic tape file system from the 1950's. We used to put a label on the tapes based on the date or a sequence number. Not a completed whole.
--CELKO-- Books in Celko Series for Morgan-Kaufmann Publishing: Analytics and OLAP in SQL / Data and Databases: Concepts in Practice Data / Measurements and Standards in SQL SQL for Smarties / SQL Programming Style / SQL Puzzles and Answers / Thinking
in Sets / Trees and Hierarchies in SQL

Creating many arrays with different names

I'm trying to create many arrays with a different names by calling this method:
n=name of array
c= some string
public Array[] newArray(String n, String c)
n[n.length]= new String();
n[n.length]= c;
As you experts might guess this does not compile. Is it even possible to do this?

no, you cannot make a dynamic variable like that.
and no, that is not the way to make arrays.
and no, there is no such thing as "Array[]" ( unless u have made an "Array" object ).
code for a new array is as such
public Object[] newArray(int size){
return new Object[size];
}called as such:
String[] strings = (String[]) newArray(10);
strings[0] = "hmmm";mmmmm

Creating Name Badges with ID

Similar Messages

Maybe you are looking for