Creating new info type in HR module
Hi all,
My requirement is to resave 0000 info type as 0001 on certain condition, can I do that?
Or is it the case that for creating custom info types range should be greater than 9000.
Thanks and regards,
Ridhima
Hi,
Yes infotype can be 9nnn not less than that.
anyhow here are the steps.
) Go to Transaction PM01.
2) Enter the custom Infotype number which you want to create (Should be a 4 digit number, start with 9).
3) Select the Employee Infotype radio button.
4) Select the PS Structure Infotype.
5) Click on Create
A separate table maintenance window appears
6) Create a PS structure with all the fields you want on the Infotype
7) Save and Activate the PS structure
8) Go back to the initial screen of PM01.
9) Click on All push button. It takes a few moments.
10) Click on Technical Characteristics. Infotype list screen appears
11) Click on Change(pencil) button
12) Select your Infotype and click on Detail (magnifying glass) button
13) Give T591A as subtype table
14) Give T591S as subtype txt tab
15) Give your subtype field as subtype field
16) Save and come back to PM01 initial screen
17) Click on Infotype Characteristics
Infotype list screen appears
18) Click on Change (pencil) button
19) Click on New Entries
20) Enter your Infotype number and short text
21) Here we have to set different Infotype Characteristics as per the requirement. (Better open another session with some standard Infotypes infotype characteristics screen and use as the reference to fill yours)
22) Save your entries.
23) Now the Infotype is created and ready to use.
24) If you want to change the layout of the Infotype as per your requirement
25) In the PM01 initial screen
Select Screen radio button and give 2000 as the screen name, then click on edit.
26) In the next screen.. Select Layout Editor and click Change.
27) Screen default layout appears
here you can design/modify the screen..change the attributes of the fields..etc.
28) Save and activate. (Dont forget to Activate at every level)
Feel free to revert back.
--Ragu
Similar Messages
-
PPCI: Create customer info type
Hi,
I tried to create a new info type for OM. I used PPCI but get the following error.
Any ideas why i can't successfully create info type 9010
Structure HRI9010 exists
Structure P9010 does not exist
Table HRP9010 does not exist
HRP9010 not created in the database
Database index XXXX not created
Module pool
Module pool MP901000 does not exist
Include MP901020 does not exist
Include MP9010BI does not existhi
this link might be useful
how to create OM Infotype
Regards
sameer -
What is the need of creating New order type in PO
Dear Experts,
I have a doubt in MM, what is the need of creating New Order Types? Please explain with Business scenario. Thanking you,
Regards,
Elangovan.AHi Elangovan
Whenever you have a doubt like this...
--- just verify the config settings for your parameter (order type here).
---Also check whether authorizations can be given for this ?
---Do you need it for specific analysis ? Are there standard reports/listings available ?
So, some of the uses of order type are:
1) What are the parameters controlled by order type ?
It controls the number ranges and screen layouts etc. So, if you want to have different set of number ranges and different screen settings, then you may need a new order type.
2) Authorizations can be controlled with order type.
3) You can also use it in analysis/listings
Best regards
Ramki -
Can we create new partner types for quallity notifications in SAP system?
Can we create new partner types for quallity notifications in SAP system?
The business requirement is to limit the available entries for partners displayed when they search in quality notification. I have already created new partner functions & assigned the relevant partner types, however struggling with defining new partner types.
Would appreciate help in resolving this.
Thanks,
NileshI know this customisation setting ...It allows us to create the partner functions & assign it to the partner determination procedure.
Then you can assign the procedure to the notification type.
This customisation setting does not solve the problem I have.
I'm looking for the partner type creation process which we assign to the partner function.
Edited by: NILESH BHAVE on Aug 12, 2010 3:06 PM -
Problem in creating New output types - Urgent
hi all,
Issue is that we had created a new plant(NSC) and for that plant, we had created new scripts for Indent and Sales Order. Means I have to create new output types for NSC Orders and Indents.
What i did that I went to SPRO- IMG- Basic Functions- Output Control- Output Determination- Output Det using Cond Tech- Output Det for Sales Documents , created new output types ANSC and BNSC for AN00 and BA00 respectively.
Then Output Types assigned to Partner Functions. Then I went to 'Maintain output determination procedure' and copied V06000 (Quotation Output) and V10000 (Order Output) to ZV0000(NSC Quotation Output) and ZV0001(NSC Order Output) respectively.
Then I went to ZV0000(NSC Quotation Output) and ZV0001(NSC Order Output) determination procedures and changed outputtypes to ANSC and BNSC instead of AN00 and BN00.
Now what should i do next?? I went to 'Assign Output determination procedures' but here no new entries can be added and I cant find procedures which I created.
Any ideas please??
Regards,
Aisha Ishrat
ICI Pakistan Ltd.HI,
follow this steps:
1. In assignment u have to assign ur new output to respective documents
eg: Assign ZV0000(NSC Quotation Output) to QT sale doc type
2. After doing this u have to maintain condition record
goto tcode: VV11-> here enter ur condition type which u have defined-> inside fill in the details--> now click the <b>communication</b> ikon in top--> fill in the details
this is solve ur purpose
regards,
Arun prasad -
How to create new agent types in transaction CBIH92.
Hi guru's,
Can anybody tell me how i can create new agent types .
thanks and regards,
Pronoy.Hi Pronoy
Agent types are not created in CBIH92, those have to be created in IMG setting as per following path
SPRO --> Environment, Health and Safety --> Industrial Hygiene and Safety --> Risk Assessment --> Specify Agent types
Hope it will help you.
Regards
Vikram -
Hi,
While creating new material types what things should be taken in to consideration?
If i want to create it by using copy function which ref. material type we should select and why?.e.g. ZSCRAP- Scrap MaterialDear Ashutosh ,
Grouping of Material that have same basic properties can be assigned to one material type.
While creating new material types following points to be considered as material type controls following things,
1) Material is intended for certain purpose ( For ex consumption)
2) Whether material Number to be assigned internally or externally
3) Number range intervals
4) Screen sequence & which screens to be appeared
5)Which user data can be entered
6) Which procurement type ( Internal or external)
7) Inventory management i.e. value & qty update required..
You can also change material type for a material under following conditions.
1) Old & new material type must be assigned to same account category,
OR
2) No. open PO ,stocks or reservations
I hope this will clarify your doubts,If found useful please reward points
Vivek Maitra -
Creating new order type in OPJH
Dear friends,
I wants to create new order type for my process order in t.code OPJH.
While creating so, i have given order category as "40" (for process order) & Order type as PI01. But system says that the key "PI01" already exist. But in the order type overview screen the system is NOT listing PI01 in the selection list ( If i press F4).
Could any guide , how to create order type for process order?
Any help will be awarded
Thanks
SenthilHi friends,
Thanks..I have found solution. Instead of OPJH, we have to look into CORN for process order.
Senthil -
Steps to create new movement types
Hi Folks,
I need to create new movement type, please let me know the steps that i need to follow.
Thanks,
Regards
RaghavendraDear
Please follow the steps in below link and create new Movement type
http://www.sap-basis-abap.com/sapmm015.htm
http://help.sap.com/saphelp_40b/helpdata/ru/fc/6cec6eb435d1118b3f0060b03ca329/content.htm
http://sap.ittoolbox.com/groups/technical-functional/sap-log-mm/new-movement-type-1857755
Regards
Aamir -
How to Create New Activity Type for Assiged to work centre Costing in Acti
Dear Sir,
We have four activity type to assigned in workcentre Costing Activity. Details are as under
AIRJET 2010 AIRJET
DONIER 2010 DORNIER
SULTEX 2010 SULTEX
SULZER 2010 SULZER
in addition one more loom is comming in our unit and require new activity type.
How can i create new.
Please guide.
Thanks in advance
Regards
AjitDear ,
To create new Activity Type , you need to follow the below steps :
KA01 - Create Primary Cost Element for the new activities type.
KL01 - Create Activity Type tied to the primary cost element.
KP26 - Change Activity Type/Activity Price Planning - maintain the Variable price
Assign the activity type to cost center using T code KP26.
In the input screen of T code KP26 ,enter version as 0, from period 1 and to period as 12 and the Fiscal Year as 20xx.
Click on Overview tab on top and key in costing details in this screen.
After performing this ,while creating the work center ,this combination of activity type & cost center should be assigned.
At work centre level , you should have
1.Create Standrad Value Key -OP19 and Formula Key in OP49.
2.Create Formula Parameters in OP7B or u can use existing one to assing in the Standard Value Key
3.In CR02-Assing the Standard value key in Basic Data and select the Formula Key in Costing tab with cost centre assingement .Save
Try and check
Regards
JH -
To create new billing type and document type and put restriction for any pa
Hi,
please let me know the procedure for creating new billing type.
Can we restrict billing type to document type for any particular country by defining it in user exit.
Rgds,
DharmeshHi,
>
> please let me know the procedure for creating new billing type.
>
Goto menu SPRO->Sales and Distribution -> Billing -> Billing documents -> Define billing types. Here highlight one of the standard SAPbilling type (which may be relevant to your business requirements), then click on copy as button to create a new one. You need to name that should start with Z, for example ZF2 and then save it.
>
> Can we restrict billing type to document type for any particular country by defining it in user exit.
>
This you can achieve in copy control settings. Go to menu SPRO->Sales and Distribution -> Billing -> Billing documents -> Maintain copy control for billing documents. Here you can select, according to your scenario, copy control to deliverydocument to billing document or Sales docuement to billing document.
Then, here also you can copy the standard copy control document types provided by SAP, and rename to your newly created Zdocument type. The source doucment (delivery or sales order) is normally assigned to a particular sales organization (which to a company code). Normally the company code is created in a particular country, hence the billing document falls only on that country.
Regards, -
Field Ref. and SRef,mat type when creating new material types
Hi,
While creating new material type we are giving the Filed ref. on that basis sytem find which fields are option mand. etc. below the filed ref. there is also SRef for material type , why this fileld is use ? if this is screen sequence ref. then what is use of industry sector when creating material bcoz industry sector also determines the scrren ref. then which will follow when we creat the material.
regards,
zafarHi,
SRef is the Screen reference .
You have to create the Sref then it should assign depending on the transaction.
Grouping of transactions that determines what screens are displayed depending on the transaction when you maintain material master records. It also determines the order in which the screens appear.
The screen reference Transaction is in table T130M.
In material master the first reference is industry sector,then specific to the industry sector what is the material type & screen sequence.
Regards,
Raj -
Create new Documentation types for Template project
Hi Expert,
Can anyne tell me the process for creating new documentation types under projects standards tab under solar_project_admin for project?
Thanks,
Basis AdminResolved !!!!!
-
Authorization for new info types added in PA61
Gurus ,
Our HR team have added new info types in transaction PA61 namely ,
Organizational assignment (0001) , Pesonal data (0002) , Address(0006) , Family(0021), education (0022), date specifications(0041) , communication(0105) , passport no (9001) , license(9003) , physical details(9008) ..
The problem once after adding it in the t-code (Without changing anything in the authorization object) the users will able to access some of the info types . HOw this could be possible ?
They want the users only to see the details in pa61 . we should not allow user to copy/edit/delete in pa61 .
but my problems are ,
1.I have added all the above info types with authorization level 'R' , but still when they click edit it is working
2.when users try to see the educational details through infotype 'eduction' it's showing the error as 'NO authorization to maintain education xx exists ' .but i have added the user name in transaction OOSB to profile ALL
If i give su53 it's shoeing the object S_WFAR_OBJ , but i am not sure how is this object useful ...
Gurus help me in solvingFYI: I deleted your duplicate post.
SU53 (the last failed auth check only) in HR (complex checks) is not very usefull.
Check which authority you have in P_PERNR? -
Hello Gurus,
Can anyone tell me how from SPRO I can create new "inquiry types" related to the transaction VA11 so that I can chose them from a drop down list using the F4 mode?
Many thanks
ChrisGoto SPRO-> Sales and distribution -> Sales->Sales document header ->Define sales document type.
Then hightlight the document type IN and click on the copy button on the top.
Rename to Z-document type like ZIN and then save.
Now check in VK11, you can find the new document type. You have to first configure in SAP development system and then after testing you need to move to other systems.
Regards
Maybe you are looking for
-
STAD Not showing data in CRM 5.0
DEar Firends, We upgraded CRM from 4.0 to 5.0 , but when we execute STAD Transaction code and puting i/p for yesterday or today or 10 day before then it show screen but without any record. So how can i achived statistic record. reply. Thanks, Rd, Sac
-
11.2.0.3.3 impdp compress table
HI ML : 源库 : 10.2.0.3 compress table target : 11.2.0.3.3 impdp 源端的compress tables,在目标端是否是compress table 之前在10g库直接 通过impdp dblink 导入时候 发现,入库的表需要手工做move compress. MOS 文档给的的测试时 在10g开始 支持导入自动维护compress table : Oracle Server - Enterprise Edition - Version
-
Is it possible to hide a form in a jsp page in jdeveloper 10.1.3?
-
Dear Gurus, We have multiple POs for the materials sending to the outsourcing vendors directly. I know I can get the requirement of component in ME2O, but about SC Stock can I know it from which POs? Thanks for any help...
-
Looking for smart/selective extract utility
Hi all, I'm looking for a utility/script that will extract data in the format of SQL INSERT statement. In other words, it will generate INSERT statements based on existing data in a table. It should allow to choose the columns I want. Ideally, it wou