Creating new system barcode font on SE73
Hi all...
I'm trying to create a new barcode font based on BC_C128B...
I created a ZXXXXXX with the same attributes...
In the form i put the ZXXXXXX in the codebar field of my char format.
When I run my program and print, i can see the actual characters instead of codebar.
But when i change the barcode to BC_C128B, it prints the codebar correctly...
What am I missing??
Thanks,
Eric
Hi Eric,
In addition to creating the new system barcode, you need to also create the print controls that contain the actual commands that are sent to the printer in the used device type.
i.e. SE73 -> Printer Bar Code -> <Device type>(e.g. HPLJ4000)
In here you have to add the barocde that you created via the 'Create' icon. You can create the ZBC_C128 barcode within the device type and assign two new print controls. e.g.
Device type HPLJ4000
Bar code ZBC_C128
Bar code prefix SBP99
Bar code suffix SBS99
Then you need to fill the print controls SBP99 and SBS99 with commands similar to SBP21 and SBS21. these commands tell the printer to switch to the barcode font.
Regards,
Aidan
Similar Messages
-
Portal Runtime Error while creating new system in portal content
Hi
Can anyone solve my problem, i am geting error while creating new system in p ortal content
Portal Runtime Error
An exception occurred while processing a request for :
iView : pcd:portal_content/com.sap.pct/admin.templates/iviews/editors/com.sap.portal.templateSelection
Component Name : com.sap.portal.admin.templateselectionwizard.default
com/sap/portal/iviewserver/cache/OClass.
Exception id: 11:29_26/12/06_0014_5891950
See the details for the exception ID in the log fileHi,
Check this link for creating system object
http://help.sap.com/bp_epv260/EP_EN/documentation/EP/N03_BB_InstallGuide_EN_US.doc
Regards
Arun -
RUNTIME ERROR WHILE CREATING NEW SYSTEM IN EP6
Hi
Can anyone solve my problem, i am geting error while creating new system PORTAL FOR to connect biw 3.5 system
Portal Runtime Error
An exception occurred while processing a request for :
iView : pcd:portal_content/com.sap.pct/admin.templates/iviews/editors/com.sap.portal.templateSelection
Component Name : com.sap.portal.admin.templateselectionwizard.default
com/sap/portal/iviewserver/cache/OClass.
Exception id: 11:29_26/12/06_0014_5891950
See the details for the exception ID in the log file
thanks in advance
Rockhi,
check the log file and let me the the error.
manish -
Problem While Creating New system
Hi.
i have downloaded sap netweaver 7.01(trail version) from SCN.
installation was successful.
Frontend GUI was installed in System Drive(C Drive)
and Netweaver was installed in D Drive
i have started the application server.
in the logon pad what are the details i need to enter while creating new systems in logon pad.
i followed help and typed the same info as in the f1 help.
in connection tab:
connection type: Custom Application Server
System connection parameters:
Description: SAP
Application Server : u9cmain (as in f1 help)
System Number: 00(as in f1 help)
System ID: u9c(as in f1 help)
SAProuter Sring: (empty)(as in f1 help)
after giving this details. when i logged in it shows this "hostname u9cmain unknown, check your application server name"
how can i rectify this error. where can i check my application server name...
help me out plz.>i followed help and typed the same info as in the f1 help.
You can't use the same host name and SIDs as per help under F1
Configure as below:
Description: SAP (You can use anything)
Application Server : (your computer name or IP address)
System Number: (has to be 2 digit, and which numbers you have assiged while installation)
System ID: (your instance name)
SAProuter Sring: (not required) -
"Create New System Entry" screen
Hello,
I would like to make pre-configured connection settings available to users in my company. When the New button is clicked in SAP Logon the first screen that comes up is "Create New System Entry" with a text of:
"Select one of the available systems from the list below. If you choose the first entry, you can specify the system parameters yourself."
However the only entry in the list is "User Specified System"
How can I populate that list with pre-configured settings for users to choose?
- Regards,
Richard BaileyHi Richard,
Yes the integration between Active Directory and SAP systems management exists. However, the automatic registration of systems in the active directory could have been done during the installation of SAP system itself.
Below could be of help:
SAP Notes 386762 and 608781
http://download.microsoft.com/download/f/3/7/f371bbba-2341-41bf-822d-2c7dd4174756/SS_AD_SAP.doc
http://www.cybersafe.com/d2/prod-and-soln/howto/sapguissoin10min
Regards,
Srikishan -
Creating new PDF417 Barcode for SmartForm
Hi Experts,
I want to create a new PDF417 Barcode into SE73 but I don't know how to interpret following instructions:
PDF417 ISO 15434
Xdim = 13mils
Xdim / Ydim = 1 / 3
SAP allow following properties:
Narrow Module With
Linear Height
Single Row Height
of Columns (1-30)*
of Rows (3-90)*
SecurityLevel
Truncation.
Regards,
DavidHi,
nobody ? How can I define the barcode with these X/Y properties ?
Regards,
David -
Error while Creating New System
Hi,
I am working on the HANA Sandbox and getting the following Error when I am trying to create a new system.
u201CLicense Key could not be installedu201D.
Regards,
Surya KumarTo revert to the new snapshot, if you don't see the red bar...follow this steps...
Go to Actions (Just below Logout) and press Revert Now.
You will be redirected to the snapshot.
Greetings,
Blag. -
Create new system and client with TDMS
Hi all;
I am tested the TDMS product with good results. I want create a new system and do one copy with time reduction time for new development system
What it´s the best solution?
- Install new system and do the client copy with TDMS
or
- System copy of production system, delete production client, create new client with UCUSV of productive system and copy client with TDMS?
Thanks a lotHi;
It´s true :).
Ok, one example, I have two systems, I want create system shell from A (client 900) to B . The central system is C
In system B I don´t have any client but the Cross is diferent to system A
I select in TDMS - ERP Shell Creation Package for SAP Release higher 4.6C
System Definition;
- Control system - C (all information it´s correct)
- Sender system - A (Client 900)
But i dont have any information about the receive system (A).
When execute the synchronization appears the system A, but with any information (destination ID)
and I have the error: Could not change password of RFC Destination sender system
Any Idea
thanks a lot for the help -
B1if BizSteps that create new systems in SLD
Hi,
I want to create scenario that creates new updates system in SLD. I read in documentation that using B1if API new jobs can be added to JobCreator and JobExecutor. Is there any help or tutorial that shows how to create job step by step and use them to create, update or delete systems in SLD?
Regards
SzymonAs per my understand, when you create a new company, you have to undergo upgrade SAP Server procedure, at this time SDL of your new company is created.
IF you are talking about document like B1PO to B1SO, then you have to refer other document.
Thanks
Kevin -
Creating New System Entry in SAPGUI 7.10
Brief Description of the problem:
I am unable to create a new system entry in SAPGUI 7.10 Logon Pad. It works fine if you choose "Custom Application Server" as Connection Type but when you choose "Group/Server Selection" instead the Next Button is still grayed out and hence unable to create a system.
Earlier even the Group/Server box never used to get populated but after creating sapmsg.ini, i could go one step further and now I think it looks for some value in Saprouter field in order for the Next button to get activated.
__*What I am Looking for:__*
Can anyone tell me how could I incorporate a saproute.ini, as I not clear on the syntax and I never have to use the sapmsg.ini and saproute.ini in SAPGUI 6.40 for users who are connected to Internal network. so this is something new in SAPGUI 7.10 and I am still clueless on why Internal users have to use saproute.ini.
<route name>=<route>
Here <route> has the following form: /H/<hostname where saprouter is running>/S/<service saprouter is running>
So in the above string, how will I find the service Saprouter is running.
ThanksThanks for the response.
It will work if you add "sapmsSID 3600/tcp" to the etc\*Services* file.
In SAPGui 6.40, i used to just have sapms00 3600/tcp and it works.
so in SAPGUI 7.10 looks there is a slight change and need to suffix the SID details also. I still don't find any SAPGui 7.10 documentation regarding the change I did in services file.
Surprisingly SAP support was recomending to add router entry inorder to make it work inspite teling them we don't need to access SAP systems through router since we access them internally. No good support from them and they just jump to conclusions and they keep repeating the same thing over and over again even if you try to make them understand that it's not what you need.
Regards
Vipin -
No CRM 7.0 version available in creating new system in SMSY under CRM
Hi ALL,
I have solution manager 7.0 with SP 14 installed and configuring the maintenance optimizer.
Now, my problem is I want download SP for CRM 7.0 . While creating a new system in SMSY under CRM there is no
option for CRM 7.0 as product version, the latest product available is CRM 2007.
How can I get the right product there or is it Ok to go with the CRM 2007.
Thanks,
SenpaiHi Sen
If CRM 2007 is not the same as CRM 7.0 then defining it incorreclty might affect configuration or identification of
correct SPs to download
It could be the location of the new CRM product is found under a different naming convention or header
- search other likely product trees for this
Or
- it could be the product is still in ramp-up and not officially released via PPMS - wait for release
- product is just out of ramp-up but no Solution Manager definitions exist - request from SAP
- Solution Manager definitions exist for CRM 7.0 on a higher Solman SP than the one you are operating - upgrade Solman SP or stack
Best wishes
Stuart -
DSWP - Nothing happens when you create new system
Hi SDN
How are you?
We are on Solution Manager 4.0. I have already defined 3 systems in transaction DSWP.
I have recently applied support packs 9 and 10. Now when I try to define a new system in transaction DSWP, nothing happens.
When I click on the "New: button, I am prompted to enter the system and the Language.
I enter PRD for system and keep the Language as EN.
I then have 2 options "continue" or "cancel".
No matter what button I press, nothing happens.
I then tried to copy an existing system, and again nothing happens.
Any help that you provide would be appreciated.
Thanks
SamHi Ragu
Thanks for the response.
SAP actually came back with a fix.
I had to apply Note 1008717 )HTMLViewer: Postdata of length more than 255 gets)
Once I applied this my problem was fixed.
This was working prior to me implementing SP 9 and 10 on SolMan 4.0. So the above note might be needed for all who implement this support pack.
Thanks again fro the help.
Regards
Sam -
New smartform barcoding technology not producing barcodes
Hello all,
I am wanting to change an existing Smartform label to print using new barcoding technology instead of barcode dll. Our company wants to get away from using the barcode dll for printing smartforms.
When I print out the label the text shows up where it is needed but where barcodes are needed there is nothing. The spool does generate a problem error in the log. I have this included in bottom of post. Below is the information I believe will be valuable in
troubleshooting. If there is anything else you need feel free to let me know. I have spent quite some time trying to troublshoot this. If any of you can provide any help I would really appreciate it. Thanks in advance.
Printer Model: Zebra 170xi4 (300 dpi)
Smartform Page Format Dina4
Non-continuous labels are used in printer and settings in printer show
that as well
SE73 - Created new system barcode named Z128B_N1 via SE73
SPAD - Made copy of device type LZEB3 and named it ZEB3
SE73 - Linked new system barcode Z128B_N1 to printer barcode ZEB3
SPAD - device type ZEB3
SPAD - host spool access method S
The windows 2008 Server that handles printing is running SAPLPD version 6.12 according to log.
text file generated log of spool generation
start of spool text
SAP spool error log
=====================
Print request processing log
Character converter active when first problem occurred
Data was saved with character set 4102
Data will be converted to character set 1162 (synt = 1162)
Errors occurred processing this print request
OTF module: Unknown print control should be output
OTF module: Unknown print control should be output
OTF module: Unknown print control should be output
OTF module: Unknown print control should be output
OTF module: Unknown print control should be output
OTF module: Unknown print control should be output
OTF module: Unknown print control should be output
OTF module: Unknown print control should be output
OTF module: Unknown print control should be output
OTF module: Unknown print control should be output
Print output may not be as intended
Most important attributes of spool request
Request number 130532
Request name SMART COR5 PRJOHT0
Client 810
Owner PRJOHT0
Request attributes
Time created 2011042817115900
Remaining life +00003000000
Dispo 1 (Go/Hold) G
Dispo 2 (Keep/Delete) D
Dispo 3 (Indirect/Direct) D
Default output device COR5
Default no. copies 1
Format DINA4
Main print request characteristics
Spool request number 130532
Print request number 1
Print request attributes
Time created 2011042817115900
Output device COR5
Format DINA4
Character converter active when first problem occurred
No information available
end of spool textHello Aidan,
Thanks for the quick response. I did not create the specific printer barcode in SE73 -> Printer Fonts. I created it via SE73 -> Printer Bar Codes. I did try to only create barcode via SE73 -> System Bar Codes but it did not work in my first attempt and then I added it via SE73 -> Printer Bar Codes in my second attempt. Both attempts same result. Do you still think I need to remove the Printer Bar Code reference via SE73 -> Printer Bar Codes?
I did reference SAP note #645158 as well thinking it would work for all device types specifically Zebra device types found in linked note SAP note #750772. If you have any other suggestions I will gladly try it.
Thanks,
John -
Barcode Fonts in Oracle AS 10g
Hello.
I've an forms application, that initiali has been developed to work on Oracle AS 10g Windows. It has a TTF barcode font, but the reference there has been made with the windows font name. I've tryed to mapped it in uifont.ali in linux, but with no sucess. When running the form (that creates a report), the max i've archived is to make the font name (linux) apear in the document fonts properties, but no barcode apears in the document. The oracle developer reports builder recognizes the font, but when generating the report, no barcode apears...
does anyome has managed to create reports with barcode fonts in linux?
Thanks in advance
Bruno SantosHi,
Here's the Oracle Forms 10g Deployment Guide
http://download-east.oracle.com/docs/cd/B14099_11/web.1012/b14032/toc.htm
HTH,
Jim -
How to configure new system landscape in portal server for bsp iview
Hi
can you tell me what are the necessary parameters (apart form default parameters that were there while creating new system landscape) for configuring a system landscape for using it in bsp iviews.
thanks & regards
AshutoshHello,
what you call system name has to be the system alias, and this alias has to be the same between DEV/QUAL/PROD environment.
Your portal application will look for data/BAPIs/etc... with this alias. Your portal application will know on which environment it has to retrieve data/BAPIs/etc... will be defined in each system object you have defined for each environment.
Fabien.
Maybe you are looking for
-
Everytime I log and capture a clip and try to play it in the sequence....it says the clips are unrendered....they haven't had effects applied or anything...where can I control render settings?
-
Web Service Connection on fresh SUM formula is zero
I am using Xcelsius SP1. I have a field in the spreadsheet that has the formula "=SUM(H12:H16)". I am using a Web Service Connection to refresh the data. Following a refresh from the web service connection the field with the SUM formula is 0. I h
-
Problem in Connecting to PC Suite
Phone - Nokia 6275 CDMA Cable - Nokia CA-53 PC Suite - 6.83 PC OS - Win XP SP2 While trying to connect my phone to PC Suite through data cable, I get a USB device installation error message saying: "Service or service name already exists. USB device
-
How can I prevent cancellation of GR after it has been invoiced? Can IV be cancelled after payment. If yes then what shall be done to prevent its cancellation after payment? If material is deleted then can we create a new material with the deleted m
-
Issue in Partner Profile config for Outbound IDOC
Hi Experts, I have requirement like, When ever there will be any change in a Sales Order an Outbound IDOC will get triggered though a output type. This IDOC will save a file in the Application Server. The Message Type i am using is ORDERS and the Bas