Creating objects when count is greater than 1

Hi
I'm trying to create a runbook that checks service manager for incidents that have been created in the last 10 minutes of the same category. When the result of this check brings back more than 5 objects I want a problem to be created with the incidents linked
to the problem.
I know a junction will be required somewhere in order to stop the create object running multiple times but when this occurs I cannot address the scobject guids in the create relationship step. I have attached a screenshot of the runbook below.
Thanks

Hi,
Flatten the "Get Object Count" Activity so it triggers only once.
Regards,
Stefan
www.sc-orchestrator.eu ,
Blog sc-orchestrator.eu

Similar Messages

'Failed to create object' when trying to open PDF attachment in Dynamics GP 10 OLE notes

Microsoft Dynamics GP 10 users who updated to Adobe Reader X are getting errors when trying to open or create an OLE attachment on a note.
They get 'Failed to create object' when trying to open an existing and getting 'Failed to connect.
And " Link may be broken" when trying to create a new one.
PDF attachments work pretty fine with previous version of Acrobat reader 7,8,9 up tp 9.4
Now that we install Acrobat X, something has changed.
It only does this for PDF attachments, Other file types work fine.
I was able to remove Adobe Reader X and install a prior version to work around the issue.
Has Adobe developed any Fix for the integration of X and OLE objects.
regards,

Hi Gestis,
What version of Adobe Reader are you using?
If its less that 10.1.2, please update it to 10.1.2 and then try to open PDF attachment inDynamcs GP OLE notes.

How to prevent numericstepper from setting the value to the defined Maximum when a number greater than maximum is entered in by keyboard and user hits the "Enter" key.

I need to set the Maximum so that the use can use the mouse to change the value of numericstepper (and not go over a certain number), but at the same time I have to allow the user to enter their value by typing in the text field. When the user enters a number greater than the Maximum, I disable the "Ok" button of the dialog and show a red warning(error message). The issue is that the user can hit "Enter" and numeric stepper would set the value to the Maximum and the dialog box would close and the rest of code would run. I want the numericstepper not to change the value and keep showing the warning even if the user hits the "Enter".
Note: Setting maxChar does not help since my maximum is 1000, and user might enter 5555
I would appreciate the help.

Thanks for trying to help, But
The issue is that if I set the maximum value of stepper 1 greater than the max value that I want, then the user can select an invalid value(of myMax + 1) when he clicks on the UP arrow of the numeric stepper(which is not acceptable for what I am working on).
I need to preserve the users invalid number, while not letting the user to select an invalid number by clicking UP key.
I noticed that when the user enters a number greater than the Maximum, and then click on the down arrow, it would set the value to 1 less than the maximum. This is not acceptable either.

Create Object when Runtime ?

Hi, everyone. Is there anybody could give advice about creating object on Forms Runtime? (I mean, I could create eg:Button when in Form runtime). Any help would be appreciated.

Any help here...
http://support.microsoft.com/kb/288117
http://www.macworld.com/article/1154785/welcomebackvisualbasic.html

ActiveX can't create object when VB Script called from Labview

I have an interesting issue that I can't find a solution for. I am using the DIAdem Run Script.VI in Labview to call a script that opens an Outlook object and sends an email. When the script is called via LabView I get this error:
However, when I manually run the script from the DIAdem script tab it works as expected with no errors.
This is the code:
'Begin email send function
Dim oOutlookApp
Dim oOutlookMail
Dim cnByValue : cnByValue = 1
Dim cnMailItem : cnMailItem = 0
' Get Outlook Application Object
Set oOutlookApp = CreateObject("Outlook.Application")
' Create Mail Item
Set oOutlookMail = oOutlookApp.CreateItem(cnMailItem)
' Set Mail Values
With oOutlookMail
.To = "[email protected]"
.Subject = "Report: " & Data.Root.ActiveChannelGroup.Name & " for " & CurrDate
.Body = "test automatic report emailing with VB Script."
' Add Attachement
Call .Attachments.Add(strLocFileName, cnByValue, 1 )
' Send Mail
Call .Send()
End With
(Original code includes Option Explicit and all variables are properly included/declared, I just took the snippet of what's causing the error).
I have looked at the following threads for info already:
http://forums.ni.com/t5/DIAdem/Some-errors-when-calling-LabVIEW-VIs-Interactively-from-DIAdem/td-p/2...
http://forums.ni.com/t5/DIAdem/Active-X-component-cannot-create-object-Diadem-8-1/m-p/71212/highligh...
-I tried running the script via Windows explorer (per Brad's suggestion) by itself without the DIAdem specific functions and it runs fine.
http://forums.ni.com/t5/DIAdem/Error-while-runing-diadem-asynchronous-script-from-labview-on/m-p/111...
-I am not running the scripts asynchronously
Using Windows 7 (64bit), DIAdem 11.2 and LabView 7.1.1
Thank you.

Hey techerdone -
I'm afraid I personally can't be of much help - I tested your code both from DIAdem and from LabVIEW and each worked without issues in both cases (Outlook closed, Outlook open). I'm using DIAdem 2011 SP1, LabVIEW 2011, and Outlook 2007...
Derrick S.
Product Manager
NI DIAdem
National Instruments

Automation server can't create object when calling a jsp from a button

Hello,
I have created the following jsp that allow me to execute an external program that is located on the client side:
<script language="JavaScript" type="text/javascript">

</script>
If I call this jsp in a simple html page is works correctly when i call it from a button in apex (3.0) I got the error message Automation server can't create object.
Any idea ?
Thanks,
Claude-Alain

Hi Claude,
Just be sure that you really (like really) trust your endusers, because I can see some huge opportunities for exploiting that JavaScript routine you've shown. If you're not taking steps to prevent cross site scripting (search this forum or Google for details on what that is), then it's not beyond the bounds of possibility for someone to do something 'nasty' which would do horrible things to your end users if your executing a program on their client machines without any warning or validation of what that program actually does.
Sometimes it's best to work backwards from the point of view of....what if you walk into work one morning and find that 400 end users machines have had their hard-drives wiped because the script arbitrarily executes whatever command you pass to it? Then you can perhaps see that what sometimes looks like a good idea might not be such a good idea after all ;)

T400 switches sleeping mode when opening angle greater than 40 degrees

When you open the machine to boot, I must open in the corner from 0-40 degrees. I have to slid hand to press the Power button, the computer boots normally into Windows 7. Then:
- When I open angle greater than 40 degrees (40-180 degrees), the machine switches to sleeping.
- When closed off the screen in less than 40 degree angle, the machine is turned on (switch to normal working mode)
Error picture
Please tell me the cause and solution.
Thanks for any suggestion
Cuong Le
Spoiler (Highlight to read)
Solved!
Go to Solution.

Hi Cuonglp,
Welcome to Lenovo Community!
As per the query we understood that you are facing an issue with Display on your ThinkPad T400.
In this case the issue might be with LCD cable, I suggest you to check with reseating LCD cable once.
Please click here to visit the link on how to go with reseating the cable, go to page 143.
Hope this helps.
Best regards,
Hemanth Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Keyword list image count is greater than metada keyword image count.

How do you get the image counts to be the same? I have looked through the images of the offending keywords and there are no check marks against other keywords. Also above the film strip the total of all images selected is less than the total images. This has been an upgrade from Elements 10 catalog. Thanks.

Thank you, but I need to start with a "clean slate" or at least a correct one. So I have persevered and found a solution, which may seem lengthy, but beats rebuilding the keyword structure image by image. I had numbers against parent keywords (should be zero) and incorrect numbers against child keywords, not all, but some cases of each. Dealing with the child keywords within a parent first and then the parent, the procedure I used was:-
1. Select child keyword
2. Select all
3. Create collection using keyword name for clarity
Repeat steps 1-3 for all child keywords within the parent keyword
4. Delete the parent keyword
5. Recreate the parent keyword
6. Recreate all child keywords within the parent keyword
7. Select a collection
8. Select all
9. Select the appropriate keyword and drag to an image
Repeat steps 7-9 for remaining collections
It appears to work and all the unaffected keywords are showing in each image!!!
The engineer in me is satisfied!

How to Create Purchase Order with Co Product greater than Consumption

Hi All,
I'm new to SAP. Can any one please help with the steps to create PO with Co Product greater than Consumption.
Thanks in Advance.

Hi Srinivasu,
If you are talking about handling by-products during subcontracting follow the following steps.
Create Purchase order with item category "L". In the components tab maintain by-product in negative quantity. If you are not sure about the actual quantity, enter theoretical quantity ( Actual quantity can be adjusted in Subsequent adjustment in Goods receipt).
Hope this helps you.
If this has not helped you, please elaborate your requirement.
Thanks
Vasuki B S

Run-time error '429': ActiveX component can't create object

HI,
I am having the following error in my Excel VBA Run-time error '429': ActiveX component can't create object when running the following code:
Dim objDistiller As New ACRODISTXLib.PdfDistiller6
objDistiller.FileToPDF2 filePath & ".PS", filePath & ".PDF", "T:\Templates\PDFSettings\Standard.joboptions", 1
This code has been working for years on all our systems, but due to recent security issues our administrator changed all user accounts to not have local administrator rights and now when we run this code we get the above error message.
I have had a look at DComcnfg.exe to try and get it to work by setting the default property permissions to allow access by Everyone but I am still getting the error.
Any help would be greatly appreciated.
Regards.
Shane Chapman.

Hi Shane,
Here is another way to create PDF with Macro using another API than Distiller. This API is faster too.
Probably this post is not of interest anymore but here is how I have done it:
1. Download PDFCreator: http://sourceforge.net/projects/pdfcreator/
2. Use the following Macro:
Option Explicit
Sub printPDFmacro()
'Author : Ken Puls (www.excelguru.ca)
'Macro Purpose: Print to PDF file using PDFCreator
' (Download from http://sourceforge.net/projects/pdfcreator/)
' Designed for early bind, set reference to PDFCreator
Dim pdfjob As PDFCreator.clsPDFCreator
Dim sPDFName As String
Dim sPDFPath As String
'/// Change the output file name here! ///
sPDFName = "Facture-" & nclient2 & " le " & Format(Date, "yyyy-mm-dd") & ".pdf"
sPDFPath = "E:\Partenaire Scolaire\Comptabilite\Factures"
PDFFileName2 = sPDFPath & "\" & sPDFName
Set pdfjob = New PDFCreator.clsPDFCreator
With pdfjob
If .cStart("/NoProcessingAtStartup") = False Then
MsgBox "Can't initialize PDFCreator.", vbCritical + _
vbOKOnly, "PrtPDFCreator"
Exit Sub
End If
.cOption("UseAutosave") = 1
.cOption("UseAutosaveDirectory") = 1
.cOption("AutosaveDirectory") = sPDFPath
.cOption("AutosaveFilename") = sPDFName
.cOption("AutosaveFormat") = 0 ' 0 = PDF
.cClearCache
End With
'Print the document to PDF
ActiveSheet.PrintOut copies:=1, ActivePrinter:="PDFCreator"
'Wait until the print job has entered the print queue
Do Until pdfjob.cCountOfPrintjobs = 1
DoEvents
Loop
pdfjob.cPrinterStop = False
'Wait until PDF creator is finished then release the objects
Do Until pdfjob.cCountOfPrintjobs = 0
DoEvents
Loop
pdfjob.cClose
Set pdfjob = Nothing
end sub
Have any questions, just have to poke me.
Michael

Using Xpath in Receiver Determination for greater than 500

Hi,
I am trying to use Xpath in the receiver Determination step and I want to check a field which is at item level and comes multiple times(0-unbounded) greater than 500.I tried with different options per SDN blogs,Xpath functions,but still I couldn't able to get what i am trying.I want to process the message when "quantity" is greater than 500,else I want to ignore the message with no errors.
I gave like this /p1: /LIST/item[quantity>499] EX
item loop is 0-unbounded and I need to check for every quantity.I selected the check box multi line as well.
I played around different options,but still did not get what I am looking for.
please suggest in this regard ,how I need to give the expression.
Thank you,
Sri

Hi,
For validating that the item field is occuring more than 500 times you need to choose the
2.The exact XPath would be in your case *(/p1: /LIST/itemquantity[499]EX)*
This means if the 500 th occurance of the item exists then the condition satisfies that is always true for 500 and above occurance of the item.
Please revert if the suggestion proves to be helpful.
cheers,
Abhishek.
Edited by: Abhishek Paul on May 6, 2010 10:55 PM
Edited by: Abhishek Paul on May 6, 2010 11:02 PM
Edited by: Abhishek Paul on May 6, 2010 11:08 PM

Temp files greater than 2GB

While running an OBIEE report, I receive the following error:
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 46073] Operation 'stat()' on file '/u02/OracleBIData/tmp/nQS_28056_15671_77250638.TMP' failed with error: (75) . (HY000)
The problem seems to be that the TEMP file created by the query is greater than 2 GB.
Is there a way within OBIEE to bypass the 2 GB file size limitation of 32-bit servers (Windows/LINUX)?

John - I don't understand how this is a cache issue. The file being created is a TEMP file in the /OracleBI_Data/tmp directory. What is the relationship between the TEMP directory and cache?
My DATA_STORAGE_PATHS is currently set at 4 GB.
By the way, I have spent a lot of time reading your OBIEE blog, and have found it to be extremely helpful.

Slide show greater than 200

I have Photoshop Elements 6.0 and Premier Elements 4.0. I would like to create a slide show with greater than 200 slides and then burn that show to a DVD. Photosho Elements will not let me work with greater than 200 images. How do you get around this problem?

Create two projects intead of one and export the slide show in to PRE then burn a DVD.

Error message: Automation server can't create object

Hello
I'm currently receiving the error message: 'Automation server can't create object' when trying to view reports. This only happens when i try to view them through the IIS server using the .net launchpad. It happens with both reports that i have produced and Feature example reports, it also happens from both client machines and the server.
Any ideas on how to fix this issue?
regards
Matt

Hi,
I am not sure if you still are having this issue. In my experience I have seen this issue if for all the BO related services the rights are not proper. These have to be given from dcomconfig.
Hope this helps
Amit

Run time error '429' Active X Componenet can't create object

Hi,
We are getting this error "Run time error '429' Active X Componenet can't create object" when we open the Input templates.
No drop down of the Dimension members is appearing.
Please help.
Reagrds,
Anita

Hi Anita,
Please try imeplenting SAP Note: 1508168. Hope this helps.
Rgds,
Poonam

Creating objects when count is greater than 1

Similar Messages

Maybe you are looking for