Creating Replica in Yosemite is Failing

Hello all,
I have two Yosemite Servers both running 10.10. I have an OD master running fine for all of my clients. I'd like to replicate that OD master. This is what I get in the logs when attempting to create the replica as it fails with a generic error of checking my network settings. Any help would be great. I've checked all DNS and forward and reverse works for both servers.
2014-12-11 20:23:04 +0000 slapconfig -createreplica
2014-12-11 20:23:08 +0000 Warning: An error occurred while disabling GSSAPI binding.
2014-12-11 20:23:08 +0000 1 Creating computer record for replica
2014-12-11 20:23:49 +0000 command: /usr/sbin/slapconfig -delkeychain /LDAPv3/127.0.0.1 campusreplica01.flyers.stark.k12.oh.us$
2014-12-11 20:23:49 +0000 slapconfig -delkeychain
2014-12-11 20:23:49 +0000 Added computer password to keychain
2014-12-11 20:23:49 +0000 Adding ldap and host service principals
2014-12-11 20:23:49 +0000 2 Creating ldap replicator user
2014-12-11 20:23:49 +0000 _ldap_replicator exists from previous replica - migrating
2014-12-11 20:23:49 +0000 NSString *_getReplicatorPasswordWithNode(ODNode *): no syncrepl attribute found in results
2014-12-11 20:23:49 +0000 Unable to get replicator password, recreating replicator
2014-12-11 20:23:49 +0000 ServerID for this replica 8
2014-12-11 20:23:51 +0000 command: /usr/bin/sntp -s time.apple.com.
2014-12-11 20:23:51 +0000 3 Updating local replica configuration
2014-12-11 20:23:51 +0000 4 Gathering replication data from the master
2014-12-11 20:23:51 +0000 5 Copying master database to new replica
2014-12-11 20:23:51 +0000 Removed directory at path /var/db/openldap/openldap-data.
2014-12-11 20:23:52 +0000 Retrieved DB_CONFIG for dc=flyers,dc=stark,dc=k12,dc=oh,dc=us from master
2014-12-11 20:23:52 +0000 Retrieved DB_CONFIG for cn=authdata from master
2014-12-11 20:23:52 +0000 Starting LDAP server (slapd)
2014-12-11 20:23:52 +0000 slapd started
2014-12-11 20:23:52 +0000 Stopping LDAP server (slapd)
2014-12-11 20:23:54 +0000 command: /usr/sbin/slaptest -f /etc/openldap/slapd.conf -F /etc/openldap/slapd.d
2014-12-11 20:23:54 +0000 command: /usr/sbin/slapadd -c -w -l /var/db/openldap/openldap-data/backup.ldif
2014-12-11 20:24:02 +0000 command: /usr/sbin/slapadd -c -w -b cn=authdata -l /var/db/openldap/authdata/authdata.ldif
2014-12-11 20:24:04 +0000
2014-12-11 20:24:04 +0000 5489fd62 slapd is running in import mode - only use if importing large data
5489fd62 bdb_monitor_db_open: monitoring disabled; configure monitor database to enable
2014-12-11 20:24:04 +0000 6 Starting new replica
2014-12-11 20:24:04 +0000 Warning: An error occurred while re-enabling GSSAPI.
2014-12-11 20:24:04 +0000 Starting LDAP server (slapd)
2014-12-11 20:24:04 +0000 slapd started
2014-12-11 20:24:04 +0000 command: /usr/bin/ldapmodify -c -x -H ldapi://%2Fvar%2Frun%2Fldapi
2014-12-11 20:24:04 +0000 command: /usr/bin/ldapsearch -x -LLL -H ldapi://%2Fvar%2Frun%2Fldapi -b cn=config -s base olcServerID
2014-12-11 20:24:04 +0000 command: /usr/bin/ldapmodify -c -x -H ldapi://%2Fvar%2Frun%2Fldapi
2014-12-11 20:24:04 +0000 Starting password server
2014-12-11 20:24:11 +0000 7 Enabling local Kerberos server
2014-12-11 20:24:11 +0000 Configuring Kerberos server, realm is FLYERS.STARK.K12.OH.US
2014-12-11 20:24:11 +0000 command: /usr/sbin/sso_util configure -x -k -r FLYERS.STARK.K12.OH.US -f /LDAPv3/ldapi://%2Fvar%2Frun%2Fldapi -a diradmin -p **** -v 1 all
2014-12-11 20:24:14 +0000 command: /usr/bin/ldapmodify -c -x -H ldapi://%2Fvar%2Frun%2Fldapi
2014-12-11 20:24:14 +0000 Stopping LDAP server (slapd)
2014-12-11 20:24:15 +0000 Starting LDAP server (slapd)
2014-12-11 20:24:16 +0000 slapd started
2014-12-11 20:24:16 +0000 8 Enabling syncprov overlay on the replica
2014-12-11 20:24:16 +0000 command: /usr/bin/ldapsearch -x -LLL -H ldapi://%2Fvar%2Frun%2Fldapi -b cn=config objectClass=olcSyncProvConfig dn
2014-12-11 20:24:16 +0000 command: /usr/bin/ldapmodify -c -x -H ldapi://%2Fvar%2Frun%2Fldapi
2014-12-11 20:24:16 +0000 adding new entry "olcOverlay=syncprov,olcDatabase={1}bdb,cn=config"
2014-12-11 20:24:16 +0000 command: /usr/bin/ldapmodify -c -x -H ldapi://%2Fvar%2Frun%2Fldapi
2014-12-11 20:24:16 +0000 adding new entry "olcOverlay=syncprov,olcDatabase={2}bdb,cn=config"
2014-12-11 20:24:16 +0000 9 Adding replica to master
2014-12-11 20:24:16 +0000 Remote server (campus.flyers.stark.k12.oh.us) ID: (null)
2014-12-11 20:24:16 +0000 command: /usr/bin/ldapsearch -x -LLL -H ldapi://%2Fvar%2Frun%2Fldapi -b dc=flyers,dc=stark,dc=k12,dc=oh,dc=us uid=_ldap_replicator dn
2014-12-11 20:24:16 +0000 No serverID specified, exiting
2014-12-11 20:24:16 +0000 failed to add parent/master to replica
2014-12-11 20:24:16 +0000 failed to add parent/master to replica (error = 73)
2014-12-11 20:24:16 +0000 Deleting Cert Authority related data
2014-12-11 20:24:16 +0000 OPENDIRECTORY_ROOT_CA_IDENTITY not found, unable to determine rootCA name from OPENDIRECTORY_ROOT_CA_CERTIFICATE, defaulting to configured value of (null)
2014-12-11 20:24:16 +0000 No intCAIdentity, not removing int CA from keychain
2014-12-11 20:24:16 +0000 command: /bin/launchctl unload -w /System/Library/LaunchDaemons/com.apple.xscertd.plist
2014-12-11 20:24:16 +0000 command: /bin/launchctl unload -w /System/Library/LaunchDaemons/com.apple.xscertd-helper.plist
2014-12-11 20:24:16 +0000 command: /bin/launchctl unload -w /System/Library/LaunchDaemons/com.apple.xscertadmin.plist
2014-12-11 20:24:17 +0000 Stopping LDAP server (slapd)
2014-12-11 20:24:18 +0000 Stopping password server
2014-12-11 20:24:21 +0000 Removed all service principals from keytab for realm FLYERS.STARK.K12.OH.US
2014-12-11 20:24:21 +0000 Removed file at path /var/db/openldap/openldap-data/__db.001.
2014-12-11 20:24:21 +0000 Removed file at path /var/db/openldap/openldap-data/__db.002.
2014-12-11 20:24:21 +0000 Removed file at path /var/db/openldap/openldap-data/__db.003.
2014-12-11 20:24:21 +0000 Removed file at path /var/db/openldap/openldap-data/__db.004.
2014-12-11 20:24:21 +0000 Removed file at path /var/db/openldap/openldap-data/__db.005.
2014-12-11 20:24:21 +0000 Removed file at path /var/db/openldap/openldap-data/__db.006.
2014-12-11 20:24:21 +0000 Removed file at path /var/db/openldap/openldap-data/altSecurityIdentities.bdb.
2014-12-11 20:24:21 +0000 Removed file at path /var/db/openldap/openldap-data/apple-computers.bdb.
2014-12-11 20:24:21 +0000 Removed file at path /var/db/openldap/openldap-data/apple-config-realname.bdb.
2014-12-11 20:24:21 +0000 Removed file at path /var/db/openldap/openldap-data/apple-generateduid.bdb.
2014-12-11 20:24:21 +0000 Removed file at path /var/db/openldap/openldap-data/apple-group-memberguid.bdb.
2014-12-11 20:24:21 +0000 Removed file at path /var/db/openldap/openldap-data/apple-group-nestedgroup.bdb.
2014-12-11 20:24:21 +0000 Removed file at path /var/db/openldap/openldap-data/apple-group-realname.bdb.
2014-12-11 20:24:21 +0000 Removed file at path /var/db/openldap/openldap-data/apple-realname.bdb.
2014-12-11 20:24:21 +0000 Removed file at path /var/db/openldap/openldap-data/c.bdb.
2014-12-11 20:24:21 +0000 Removed file at path /var/db/openldap/openldap-data/cn.bdb.
2014-12-11 20:24:21 +0000 Removed file at path /var/db/openldap/openldap-data/DB_CONFIG.
2014-12-11 20:24:21 +0000 Removed file at path /var/db/openldap/openldap-data/dn2id.bdb.
2014-12-11 20:24:21 +0000 Removed file at path /var/db/openldap/openldap-data/entryCSN.bdb.
2014-12-11 20:24:21 +0000 Removed file at path /var/db/openldap/openldap-data/entryUUID.bdb.
2014-12-11 20:24:21 +0000 Removed file at path /var/db/openldap/openldap-data/gidNumber.bdb.
2014-12-11 20:24:21 +0000 Removed file at path /var/db/openldap/openldap-data/givenName.bdb.
2014-12-11 20:24:21 +0000 Removed file at path /var/db/openldap/openldap-data/id2entry.bdb.
2014-12-11 20:24:21 +0000 Removed file at path /var/db/openldap/openldap-data/ipHostNumber.bdb.
2014-12-11 20:24:21 +0000 Removed file at path /var/db/openldap/openldap-data/l.bdb.
2014-12-11 20:24:21 +0000 Removed file at path /var/db/openldap/openldap-data/log.0000000001.
2014-12-11 20:24:21 +0000 Removed file at path /var/db/openldap/openldap-data/log.0000000002.
2014-12-11 20:24:21 +0000 Removed file at path /var/db/openldap/openldap-data/log.0000000003.
2014-12-11 20:24:21 +0000 Removed file at path /var/db/openldap/openldap-data/log.0000000004.
2014-12-11 20:24:21 +0000 Removed file at path /var/db/openldap/openldap-data/log.0000000005.
2014-12-11 20:24:21 +0000 Removed file at path /var/db/openldap/openldap-data/log.0000000006.
2014-12-11 20:24:21 +0000 Removed file at path /var/db/openldap/openldap-data/log.0000000007.
2014-12-11 20:24:21 +0000 Removed file at path /var/db/openldap/openldap-data/log.0000000008.
2014-12-11 20:24:21 +0000 Removed file at path /var/db/openldap/openldap-data/log.0000000009.
2014-12-11 20:24:21 +0000 Removed file at path /var/db/openldap/openldap-data/log.0000000010.
2014-12-11 20:24:21 +0000 Removed file at path /var/db/openldap/openldap-data/log.0000000011.
2014-12-11 20:24:21 +0000 Removed file at path /var/db/openldap/openldap-data/log.0000000012.
2014-12-11 20:24:21 +0000 Removed file at path /var/db/openldap/openldap-data/log.0000000013.
2014-12-11 20:24:21 +0000 Removed file at path /var/db/openldap/openldap-data/log.0000000014.
2014-12-11 20:24:21 +0000 Removed file at path /var/db/openldap/openldap-data/log.0000000015.
2014-12-11 20:24:21 +0000 Removed file at path /var/db/openldap/openldap-data/log.0000000016.
2014-12-11 20:24:21 +0000 Removed file at path /var/db/openldap/openldap-data/log.0000000017.
2014-12-11 20:24:21 +0000 Removed file at path /var/db/openldap/openldap-data/macAddress.bdb.
2014-12-11 20:24:21 +0000 Removed file at path /var/db/openldap/openldap-data/mail.bdb.
2014-12-11 20:24:21 +0000 Removed file at path /var/db/openldap/openldap-data/memberUid.bdb.
2014-12-11 20:24:21 +0000 Removed file at path /var/db/openldap/openldap-data/mobile.bdb.
2014-12-11 20:24:21 +0000 Removed file at path /var/db/openldap/openldap-data/objectClass.bdb.
2014-12-11 20:24:21 +0000 Removed file at path /var/db/openldap/openldap-data/ou.bdb.
2014-12-11 20:24:21 +0000 Removed file at path /var/db/openldap/openldap-data/postalCode.bdb.
2014-12-11 20:24:21 +0000 Removed file at path /var/db/openldap/openldap-data/sn.bdb.
2014-12-11 20:24:21 +0000 Removed file at path /var/db/openldap/openldap-data/st.bdb.
2014-12-11 20:24:21 +0000 Removed file at path /var/db/openldap/openldap-data/street.bdb.
2014-12-11 20:24:21 +0000 Removed file at path /var/db/openldap/openldap-data/telephoneNumber.bdb.
2014-12-11 20:24:21 +0000 Removed file at path /var/db/openldap/openldap-data/uid.bdb.
2014-12-11 20:24:21 +0000 Removed file at path /var/db/openldap/openldap-data/uidNumber.bdb.
2014-12-11 20:24:21 +0000 Removed file at path /var/db/openldap/authdata/__db.001.
2014-12-11 20:24:21 +0000 Removed file at path /var/db/openldap/authdata/__db.002.
2014-12-11 20:24:21 +0000 Removed file at path /var/db/openldap/authdata/__db.003.
2014-12-11 20:24:21 +0000 Removed file at path /var/db/openldap/authdata/__db.004.
2014-12-11 20:24:21 +0000 Removed file at path /var/db/openldap/authdata/__db.005.
2014-12-11 20:24:21 +0000 Removed file at path /var/db/openldap/authdata/__db.006.
2014-12-11 20:24:21 +0000 Removed file at path /var/db/openldap/authdata/alock.
2014-12-11 20:24:21 +0000 Removed file at path /var/db/openldap/authdata/authdata.ldif.
2014-12-11 20:24:21 +0000 Removed file at path /var/db/openldap/authdata/authGUID.bdb.
2014-12-11 20:24:21 +0000 Removed file at path /var/db/openldap/authdata/DB_CONFIG.
2014-12-11 20:24:21 +0000 Removed file at path /var/db/openldap/authdata/dn2id.bdb.
2014-12-11 20:24:21 +0000 Removed file at path /var/db/openldap/authdata/draft-krbPrincipalAliases.bdb.
2014-12-11 20:24:21 +0000 Removed file at path /var/db/openldap/authdata/draft-krbPrincipalName.bdb.
2014-12-11 20:24:21 +0000 Removed file at path /var/db/openldap/authdata/entryCSN.bdb.
2014-12-11 20:24:21 +0000 Removed file at path /var/db/openldap/authdata/entryUUID.bdb.
2014-12-11 20:24:21 +0000 Removed file at path /var/db/openldap/authdata/id2entry.bdb.
2014-12-11 20:24:21 +0000 Removed file at path /var/db/openldap/authdata/log.0000000001.
2014-12-11 20:24:21 +0000 Removed file at path /var/db/openldap/authdata/log.0000000002.
2014-12-11 20:24:21 +0000 Removed file at path /var/db/openldap/authdata/log.0000000003.
2014-12-11 20:24:21 +0000 Removed file at path /var/db/openldap/authdata/log.0000000004.
2014-12-11 20:24:21 +0000 Removed file at path /var/db/openldap/authdata/log.0000000005.
2014-12-11 20:24:21 +0000 Removed file at path /var/db/openldap/authdata/objectClass.bdb.
2014-12-11 20:24:21 +0000 Removed directory at path /var/db/openldap/authdata.
2014-12-11 20:24:21 +0000 Removed file at path /etc/openldap/slapd_macosxserver.conf.
2014-12-11 20:24:21 +0000 Removed file at path /etc/openldap/slapd.conf.
2014-12-11 20:24:21 +0000 Removed file at path /etc/openldap/rootDSE.ldif.
2014-12-11 20:24:21 +0000 Removed file at path /var/db/dslocal/nodes/Default/groups/com.apple.access_dsproxy.plist.
2014-12-11 20:24:21 +0000 Removed directory at path /etc/openldap/slapd.d/cn=config.
2014-12-11 20:24:21 +0000 Removed file at path /etc/openldap/slapd.d/cn=config.ldif.
2014-12-11 20:24:21 +0000 Removed directory at path /etc/openldap/slapd.d.
2014-12-11 20:24:21 +0000 Removed directory at path /etc/openldap/slapd.d.backup/cn=config.
2014-12-11 20:24:21 +0000 Removed file at path /etc/openldap/slapd.d.backup/cn=config.ldif.
2014-12-11 20:24:21 +0000 Removed directory at path /etc/openldap/slapd.d.backup.
2014-12-11 20:24:24 +0000 Stopping password server
2014-12-11 20:24:24 +0000 Removed file at path /etc/ntp_opendirectory.conf.
2014-12-11 20:24:24 +0000 Removed file at path /Library/Preferences/com.apple.openldap.plist.

I'm still having trouble getting this replica created.
This is what I see on the OD Master side when I go to add the replica the other way.
The soon to be replica is a fresh install and the certificate looks to be good to me.
I took a suggestion and made sure I did an SSH connection between the two hosts and accepted the Keys. Still nothing.
Any help would be appreciated.

Similar Messages

"Booting from Boot Camp Assistant created USB Drive...Failed to load BOOTMGR"

Hi Apple Ppl of the Wrld: I need help I been working on installing windows 8 on my Mac.
Spec of equipment:
Mac Book Pro Mid 2012
Bootcamp Version: Version 5.0.4 (473)
Bootable USB Flash Drive: Type Scan disk 4 GB windows 8 pro iso image but without the driver and the 2nd Scan disk USB flash drive with 32 GB with the Bootcamp Drivers downloaded and saved to this drive.
Please Note: I also have the original back up installation disc for Microsoft 8 Prof 64 from Microsoft where I purchased it from.
1st Bootcamp is not recognizing the Original Microsoft 8 Pro backup disk from microsoft itself.
Solution: I created the New Image from the Original Microsoft installed disc in my desk top and changed the extension to .ISO then burned the ISO image into the newly purchased DVD+R. Then I ran Bootcamp Once again and it get the following error message "The installer disc could not be found -- Insert your Windows installer disc and wait a few seconds for the disc to be recognized. Solution
2: Created a bootable usb drive with bootcamp assistant successfully with bootcamp. Yes I close, ejected or un-mounted any image that was open or had been previously used then i restarted the Mac. Next, I start the bootcamp assistant tool once again then i get the same insert your windows installer disc message.
3: Then I try to resolve the installer disc not found issue: this are the steps i took: a). Lauch disc utilities
    1. Selected the top most drive 750 GB Macintosh HDD
    2. On the right you’ll see 5 tab buttons: First Aid | Erase | Partition | RAID | Restore.
    3. Choose Partition. Then I clicked + to add another partition size of the partition was 222 GB
    4. Change the Name of the Partition to BOOTCAMP
    5. Change the Format to MS-DOS (FAT)
    6. Click Apply to save the changes and then reboot your Mac and we’ll begin Windows installation.
    7. During reboot, press and hold the alt/Option key and you’ll be presented with drives to boot from.
    8. Use the arrow keys and return button to select the Windows yellow USB key drive containing your Windows 8 installation files.
    9. This will begin the Windows install. --> then i get the following message: "Booting from Boot Camp Assistant created USB Drive...Failed to load BOOTMGR".
4: Take the Mac to best buy and let them resolve the issue and charge me like a million dollars for it :'( since i have no other idea who to get this bootcamp working at all. This has been a terribly lengthy issue and it is not as simple as it is claimed to be since i started with the Original Windows Disc Purchased from Microsoft and I have the Optical disc drive which it should be simpler from what I understand.
Please can you help It would be of great help.
<Email Edited by Host>

from what i understand you are trying to install win 8 pro from a "backup disk" the one that you purchased from microsoft.
this will not work, it is not an installer disk.
you need to start the process again. erase the partition you made on your hdd. in disc utility click the minus button after selecting the bootcamp partition, then manually drag the divider down fully then apply.
next, erase your usb then format it.
download win 8 iso from here;
http://getintopc.com/softwares/operating-systems/download-windows-8-pro/
it is perfectly legal to use your purchased product key in this install.
in bootcamp select the iso image you just downloaded, select your preferred partition size, check all 3 options.
you have the support software on another usb but you wont need it so it can be discarded. the install will work far better with the iso and support on the same drive.

Failed while creating virtual Ethernet switch. Failed to connect Ethernet switch port

Hello Folks
I am completely stuck with the configuration of my virtual networks. I have one logical switch left to add to one of my Hyper-V 2012 R2 hosts when I started getting the error below when I try to add logical switches to either Hyper-V Host. I have been using
the document. 'Hybrid Cloud with NVGRE (Cloud OS)' to implement the virtual networking. Basically using the exact configuration that is in the document. I have added the PA Logical Network and the Network adapters and added the logical switch for it to my
hyper-v 2012 R2 host and everything was fine. I am now trying to add my ISCSI Logical Switch to the host and this is the error I get. My other Hyper-V host I get this error for any logical switch I am trying to add. Can someone help me with this error. I haven't
been able to find any information about it.
Also a some quick info on tracing an error like this so I can figure out what is causing it.
Thsi is my configuration so far
So as far as I know everything is peachy untill the error below. Dead stop now
Error (12700)
VMM cannot complete the host operation on the 08-NY-VHOST01.accounts.ccac-ont.ca server because of the error: Failed while creating virtual Ethernet switch.
Failed to connect Ethernet switch port (switch name = '******', port name = '88C16766-ED02-4AC0-8CD7-660AC9D424DD', adapter GUID = '{FAF431D8-0124-4E40-BB3B-9234BAA02973}'): The system cannot find the file specified. (0x80070002).
Unknown error (0x800b)
Thank you for your time
Christopher
Christopher Scannell

notice your GUID? you may want to consider ensuring that is the same GUID associated in your database. Sometimes during data corruption theres a smidge of a chance your sql database kind of either pulls old guids esp if this was reverted to snapshot
without it being powered off etc.
I would try that first. then i would consider if you get to configure that with your current liscense associated with the host. I would need way more info to help any further

Boot Camp For Lion -- USB ISO Method --"Booting from Boot Camp Assistant created USB Drive...Failed to load BOOTMGR"

Hello, has anyone had experience with dealing with this speciifc problem?
In short, upon rebooting, I am getting a black screen with a line of text that says, "Booting from Boot Camp Assistant created USB Drive...Failed to load BOOTMGR." Nothing happens after that.
I am using Mac OS X Lion 10.7.4. I have an ISO of Windows 7 Prof. along with an 8GB usb drive. I changed the coding in my bootcamp program to allow for the normally first invisible option that allows creation of a USB Installation program using an ISO that is normally only for computers without an optical drive.
I have that box checked, the check for new software box, and the install windows box checked. I went through the process of creating the USB, downloading the software, and partitioning the drive. Then on restart, I get the failed to load bootmgr error.
Some people have suggested using two usb drives for this. I am trying that method but it does not seem to help thus far.
Can anyone offer any help?
Thanks.

from what i understand you are trying to install win 8 pro from a "backup disk" the one that you purchased from microsoft.
this will not work, it is not an installer disk.
you need to start the process again. erase the partition you made on your hdd. in disc utility click the minus button after selecting the bootcamp partition, then manually drag the divider down fully then apply.
next, erase your usb then format it.
download win 8 iso from here;
http://getintopc.com/softwares/operating-systems/download-windows-8-pro/
it is perfectly legal to use your purchased product key in this install.
in bootcamp select the iso image you just downloaded, select your preferred partition size, check all 3 options.
you have the support software on another usb but you wont need it so it can be discarded. the install will work far better with the iso and support on the same drive.

War file created in Eclipse works, but fails when created by Ant

Hi,
I am having trouble getting my flex war file to work when I create it using Ant, even though the same war works fine when I create it from my Eclipse Export War function. This is a critical problem and any ideas or suggestions would be greatly appreciated.
I have a working installation of LCDS running under JBoss 4.0.5 (in a CENTOS (Red Hat) environment). I have implemented a datatier in Java to interact with my PostgreSQL 8.x database. The Java code, plus the necessary flex jars and xml files and some mxml test programs, are all in an Eclipse J2EE project that I created from the flex samples.war file. It all works fine when I use Eclipse to create a WAR from the project and deploy it in JBoss. My problem is this: When I create a WAR piece by piece using Ant, then deploy it to JBoss, that WAR does not work. The error I get is this:
javax.servlet.ServletException: Invalid Configuration: see previous failures. flex.webtier.util.ServiceUtil.setupFlexService(ServiceUtil.java:55) flex.webtier.server.j2ee.MxmlServlet.init(MxmlServlet.java:57), etc.
When I look at the log I see this problem:
"You have more than one version of 'org.apache.commons.logging.Log' visible, which is not allowed.",
but that error is in the server log even when I use the good WAR file.
I have compared the two wars but cannot find any substantial difference between them.
Thanks in advance!

Have you tried enabling debug level logging and removing the category filters in services-config.xml? It should show all the destinations being created, and if any are failing. To get the maximum level of log detail, something like this should work:
><logging>
>
> <target class="flex.messaging.log.ConsoleTarget" level="Debug">
>
> <properties>
>
> <prefix>[Flex] </prefix>
>
> <includeDate>false</includeDate>
>
> <includeTime>false</includeTime>
>
> <includeLevel>false</includeLevel>
>
> <includeCategory>false</includeCategory>
>
> </properties>
>
> </target>
>
> </logging>
Have a check that your remoting destinations are shown starting correctly for both WAR files, and see if there are any messages in the log that might be relevant.

All CX traffic dropped on data plane with error message 'Unable to create policy params (policy-params-failed)

Problems with CX dropping all traffic - error message: Unable to create policy params (policy-params-failed) seen when issuing cli cmd show opdata framedrop on CX.
Data hits ASA Service Policy and is redirected to CX, but no traffic is passed (user experience is timeout in browser).
Problem started after SW upgrade - present running versions:
ASA version: 9.1.5(21)
CX version: 9.3.3.1 (13)
Have tried to disable all policies and create a 'permit any any' policy, which at present is the only activve policy - still same problem.
Any suggestions?

If i am using 11G andrtp is 11g but on rtp side if they configure SSL, is it mandatory to do it from our side also?No it not mandatory to enable SSL at your end however you have to configure identity and trsut at your end.
Any update on my regular question(The main forum question)?You mentioned that you are posting message from 10g to 11g and as per log you are sending it to URL - https://dev-nog.server:443/b2b/transportServlet
So few things which I see as a problem are-
1. You should use URL https://hostname:soa_server_ssl_port/b2b/httpReceiver instead of https://dev-nog.server:443/b2b/transportServlet
2. SOA server SSL port should be enabled (SSL should be enabled on SOA server)
3. You should configure wallet at 10g side to contain trust cert of 11g server
Regards,
Anuj

Creating the site content type failed when publish Infopath form to Sharepoint 2013

I have an InfoPath 2013 form trying to publish it to SharePoint 2013. When I click on publishing an error message appears stating "Creating the site content type failed". I can't figure out why this
is happening, any help on this one?
Also it appears the form template is uploaded when I go to the library settings under advance. When I see the .xsn file and click on it, it opens in InfoPath but not in sp.

Rettajm, could you please find any errors in ULS?

Siebel webclient: An attempt to create a registry key has failed

Hi,
I am trying to install siebel webclient on my PC. but i am getting an error "An attempt to create a registry key has failed" and after this, the installer has uninstalled the files.
I have succesfully installed the same around 1 year ago. But uninstalled after that. Now i am trying to install again.
I believe the uninstaller has not cleaned the Registry properly.
Can any one help me to fix this problem?
Thanks,
Umesh

And if you have to include type, it might be better to use a switch statement:
Foreach ($RegVal in $RegGroup.Group) {
Switch ($RegVal.Type) {
"String" {Set-RegString $RegVal.Value $RegVal.Data}
"Dword" {Set-RegDword $RegVal.Value $RegVal.Data} <etc>
I hope this post has helped!

Package was not created because the code generation failed.

The installable package was not created because the code generation failed. help me please

I am having the exact problem. Been stuck here for 4 days now! For some reason, I cannot successfully generate the packages. I have exported the script from touchdevelop into an app into appstudios successfully though. This error occurs for both Windows
8.1 and Windows Phone.
Please help!!
Thanks,
LPK.

Ibooks error: "Zero Kb of 9.22 EB" on Yosemite and failed downloads

I have recently upgraded from OS X mavericks to yosemite in a new mac mini.
The previously downloaded ibooks are available to read while the new free ibooks like "Apps At Work" AND "iPad Profiles Enterprise" both by apple are among few of downloads that finished consuming my bandwidth and completed 100% and then failed to download.
Every now and then it shows a cloud on book cover and I click on them to start a progress bar, which waits and then again fails to download. help I do not want to loose previously downloaded ibooks which and still download new ones.

solution done in:Re: ibooks error: "Zero Kb of 9.22 EB" on Yosemite and failed downloads

Create user from trsuted recon fails in oim 11g

Hi,
Create user functionality is failing in OIM 11g becasue i am missing one field mapping and that is Role. I dont know which attribute of trusted recon should be mapped to OIM Role field. What mapping am i missing? I am getting below error in logs:
Caused by: oracle.iam.platform.entitymgr.MissingRequiredAttributeException: [Role]
at oracle.iam.platform.entitymgr.impl.EntityManagerImpl.checkRequired(EntityManagerImpl.java:1510)
at oracle.iam.platform.entitymgr.impl.EntityManagerImpl.createEntity(EntityManagerImpl.java:265)
at oracle.iam.platform.entitymgr.impl.EntityManagerImpl.createEntity(EntityManagerImpl.java:241)
at sun.reflect.GeneratedMethodAccessor2787.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMetho
[2013-12-27T06:04:46.066-08:00] [oim_server1] [ERROR] [] [oracle.iam.reconciliation.impl] [tid: [ACTIVE].ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: oiminternal] [ecid: b33006816923ec25:17564607:14333cadc4a:-8000-0000000000001f29,0] [APP: oim#11.1.2.0.0] The following exception occurred: {0}[[
oracle.iam.reconciliation.exception.CreateException: oracle.iam.platform.kernel.EventFailedException: IAM-3051103:The create operation on user entity failed in action stage.:
at oracle.iam.reconciliation.impl.EntityTypeHandler.create(EntityTypeHandler.java:98)
at oracle.iam.reconciliation.impl.EntityTypeHandler.applyRule(EntityTypeHandler.java:76)
at oracle.iam.reconciliation.impl.EntityTypeHandler.process(EntityTypeHandler.java:49)
at oracle.iam.reconciliation.impl.ActionEngine.processEvent(ActionEngine.java:176)
Caused by: oracle.iam.platform.kernel.EventFailedException: IAM-3051103:The create operation on user entity failed in action stage.:
at oracle.iam.identity.usermgmt.utils.UserManagerUtils.createEventFailedException(UserManagerUtils.java:278)

Role is nothing but User Type(Full-Time Employee, Contractor...etc)

Cant create replica and Hyper V virtual machine management service slow shutting down

Hi,
I cant create replica and Hyper V, I go through the process and all looks good it even starts to create the hard disk but it stops at 4096K and the wizard just keeps going.
The management console is also slow or wont load virtual machines - stuck on loading virtual machines
The Hyper V virtual machine management service slow shutting down over 30 minutes on re boot of Hyper V core 2012 R2
Any ideas ?

Hi Sir,
I assume that you have a standalone hyper-v server 2012R2 and you are using hyper-v manager to manage the hyper-v host .
Which system you are using to manage hyper-v host , win8 or win8.1 or other ?
Have you created VMs on the HOST ?
I would suggest you to create vhd or someother operation on hyper-v host directly to check the result .
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Create Task Sequence Media Wizard Fails

When attempting to create a bootable media for a task sequence I get the error: Media creation failed with the error message: A required privilege is not held by the client. Refer to createTSMedia.log file to find more details. Upon looking in
this log file I see the following in red:
Unable to apply (0x80070522)
Closing image file C:\Users\sccmadmin\AppData\Local\Temp\_tsmedia_7156\Cache\LSA00022\WinPE.LSA00022.wim
Failed to create media generator (0x80070522)
CreateTsMedia failed with error 0x80070522, details=''
Media creation process that was started from Admin Console completed.
CreateMedia.exe finished with error code 80070522
I get this error with trying to create an iso as well as trying to create a bootable USB drive.
The SCCM Console was started with admin privileges. I get this same error trying it on the console installed on my workstation and the console installed on the sccm server. I am a local administrator on my workstation and sccm console. I
recall successfully creating media before but for some reason this doesn't work any longer and I am not sure what changed.
SCCM Server: OS and SCCM version are 2012 R2
Workstation: Windows 7 pro

OK, I would explain the symptoms you have as you have shown at the beginning of this post, explain the difference in policies between the Dev and Prod boxes. Ask that they create a temporary policy to add the default setting of Administrators back
in for you to do some testing.
I am guessing as this is applied to your servers and workstations, based on what you have said, that this setting resides in your Default Domain Policy GPO. Which is possibly the exact issue that Hai Deep had in the post Jórgen posted here
https://social.technet.microsoft.com/Forums/systemcenter/en-US/83b11a23-24ec-46b1-9a5f-52d335dc92b5/unable-to-create-task-sequence-media-privilege-not-held-by-client?forum=configmgrosd
The above post also says it was a user right which caused the issue, so there is a fair amount of justification to apply the test.
Is your Dev instance in the same Domain or is it a completely separate lab?
let me know if you have issues,
Thanks,

Mac Mini Yosemite update failed now stuck in loop

Hi I did the stupidest thing possible when upgrading an OS, didn't take a backup. Instead of trying to find space on a drive I just hit update and now I am kind of screwed. I have a new Mac Mini I bought in January of this year. The first time I downloaded yosemite from the app store and it failed due to "essentials" package. After several restarts and failures I booted to recovery mode and attempted to reinstall the OS from there. Three days later and that has failed countless times both on wifi and a hard ethernet connection.
Can anyone suggest a way to either get me back to mavericks or get yosemite to install correctly that won't involve me losing everything on the computer?

1. Boot into Recovery Mode
2. Plug in your external HD
3. Open disk utility and select Macintosh HD
4. Select "New Image"
5. Save it to your external HD. (If you want, you can create a read-only image, instead of a compressed image by selecting read only for the image format. The read-only takes less time)
6. Wait for it to create the disk image
7. Once it's done, click the erase tab on your Mac HD disk.
8. Select "Mac OS Extended (Journaled)" for the format, and Macintosh HD for the Name.
9. Click Erase (Note: this will erase all data on your disk)
10. Re-install OS X.
Hope this helps, and if you need clarification on any steps, just ask

Yosemite install fail - Mid-2010 Mac Mini

Hi –
My Mac Mini is caught an endless loop of trying to install Yosemite. I get several types of reasons why Yosemite can't be installed (depending on time of day I suppose) and I cannot get it out of this cycle. CMD+R on reboot doesn't get me into recovery, it's suggested I go to disk utility from a non-existent menu bar and I'm afraid my Mac's bricked. I'm tempted to order Mountain Lion from the store and see if I can get it running but it warns that I must first have a functioning Mac, which Yosemite has made sure I don't.
On boot, I get a loading bar that takes a painfully long time to fill on a "Install OS X" screen. Once that's done, I'm asked if I want to continue installing OS X, the EULA appears and I'm asked to select which disk to install OS X to. Then it gets to installing...loading...loading...loading...From there I'm given a few reasons why the install won't happen. The most recent is: File system verify or repair failed
...and then I'm asked to restart and begin the same vicious cycle all over again.
Thanks for any help!

You need to wipe the drive and reformat. If you have an external drive you can install Yosemite on the external then boot from the external drive and do a clone backup of your internal drive then reformat the drive. (reformatting erases the drive)
Create a Clone backup:
What is a clone backup?
A clone is an exact bootable copy of your internal drive. Unlike standard copying of all files to another drive, the clone software copies hidden files along with other in-use files that are not avaialbe when you copy over files to another drive.
More info on Wikipedia http://en.wikipedia.org/wiki/Disk_cloning
Time Machine is not bootable. You can only restore from Time Machine.
Software used to Clone:
SuperDuper! http://www.shirt-pocket.com/
CCC http://www.bombich.com/download.html
Use Disk Utility to clone your drive:
1. Select your new volume (indented) and click on the "Restore" tab.
2. Drag your old volume to the Source field
3. Drag your new hard drive to the Destination field.
4. Click the check box for "Erasing Destination".
5. Click restore at the bottom and it then will start copying over to your new hard drive.

Creating Replica in Yosemite is Failing

Similar Messages

Maybe you are looking for