Creating standby database using RMAN
When I'm creating standby database with RMAN command
'duplicate for standby' backups for creating standby database
have to be accessible from host where standby database
is created. I can copy the backups to standby host, or use
NFS to share the disk with backups to standby host.
But when I have backups in ASM diskgroup how can
I achieve it would be accessible from standby host?
Thanks a lot for advice,
M.
OK, thanks,
I will create standby using Grid, but I have the following problem:
database instance is running on the host where I want
to create standby database. The running instance is for
testing purposes and has the same db_name, db_unique_name, db_domain
parameters as in primary database.
I will change db_unique_name to be distinct from primary database one,
should I also change instance SID not to be the same in
testing database and standby on the same host, or when creating standby
database I can specify distinct one for standby database?
Similar Messages
-
Problem creating standby database using RMAN
I am preparing standby database on Windows environment. For the same..
1. I have taken full database,archivelog and standby control file backup on primary database.
2.Backup pieces have been moved to standby server.
3.TNS configured on both the servers.
4.connected to target as well as auxiliary database and trying to create the standby database using the below command...
duplicate target database for standby;
But I am getting the below error........
channel ORA_AUX_DISK_1: starting datafile backupset restore
channel ORA_AUX_DISK_1: restoring control file
channel ORA_AUX_DISK_1: reading from backup piece E:\BACKUP\STNDBY_CF_AIRPRIM_T690931864_S25_P1
ORA-19870: error reading backup piece E:\BACKUP\STNDBY_CF_AIRPRIM_T690931864_S25_P1
ORA-19504: failed to create file "E:\ORACLE\PRODUCT\10.2.0\ORADATA\AIRPRIM\CONTROL01.CTL"
ORA-27040: file create error, unable to create file
OSD-04002: unable to open file
O/S-Error: (OS 3) The system cannot find the path specified.
failover to previous backup
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 07/01/2009 10:35:48
RMAN-03015: error occurred in stored script Memory Script
RMAN-06026: some targets not found - aborting restore
RMAN-06024: no backup or copy of the control file found to restore
Please provide me the solution for the same...
Thanks in Advance.....
Sukantachannel ORA_AUX_DISK_1: reading from backup piece E:\BACKUP\STNDBY_CF_AIRPRIM_T690931864_S25_P1
ORA-19870: error reading backup piece E:\BACKUP\STNDBY_CF_AIRPRIM_T690931864_S25_P1
ORA-19504: failed to create file "E:\ORACLE\PRODUCT\10.2.0\ORADATA\AIRPRIM\CONTROL01.CTL"
ORA-27040: file create error, unable to create file
OSD-04002: unable to open file
O/S-Error: (OS 3) The system cannot find the path specified.
failover to previous backup
Can you please confirm if the directory E:\ORACLE\PRODUCT\10.2.0\ORADATA\AIRPRIM is existing on standby box and rman can write to that location (free space & permissions)
If the issue is still present provide us the control_files parameter from standby..
- Ravi.M -
Create Standby Database using RMAN changing backuppiece location ID753902.1
[https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&doctype=HOWTO&id=753902.1] I am trying to create standby using above document however when I do recover database I get below error
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of recover command at 07/06/2011 13:50:40
RMAN-06054: media recovery requesting unknown archived log for thread 1 with sequence 1899 and starting SCN of 25926696
logsequence 1899 is very very old sequence and doesnt exist on primary.this sequence is not needed because backu pwas taken after this sequence so I dont undrestand why rman is asking for a sequence that doesnt exists?
my db is 11.2 and in archivelog mode , i have all the archivelogs from the date backup was taken until now...
thanks
Edited by: user9198889 on Jul 6, 2011 8:29 AMCKPT wrote:
user9198889 wrote:
[https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&doctype=HOWTO&id=753902.1] I am trying to create standby using above document however when I do recover database I get below error
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of recover command at 07/06/2011 13:50:40
RMAN-06054: media recovery requesting unknown archived log for thread 1 with sequence 1899 and starting SCN of 25926696
logsequence 1899 is very very old sequence and doesnt exist on primary.this sequence is not needed because backu pwas taken after this sequence so I dont undrestand why rman is asking for a sequence that doesnt exists?
my db is 11.2 and in archivelog mode , i have all the archivelogs from the date backup was taken until now...
thanks
Edited by: user9198889 on Jul 6, 2011 8:29 AMHave you restored from the recent backup?
validate the backup compeltion_time and then retry the operation, Are you restoring from tapes?yes its recent backup(last and only backup infact ) , the backup took couple of days to run..
the backup was executing using this command BACKUP INCREMENTAL LEVEL 1 AS COMPRESSED BACKUPSET DATABASE TAG 'LEV1_BCKP_2011-06-27_11_54' PLUS ARCHIVELOG DELETE INPUT
there was no full backup so oracle must have taken full one and not incremental correct?
first logseq that was back's up is : 35818
primary uses local disk for its db and backup
standby that i am trying to create is on asm. i have copied backup to FRA and restored to +data its recovery that is failing now -
Standby database using RMAN.
Hi All,
Please provide me complete steps to create standby database using RMAN.
Regards.http://download.oracle.com/docs/cd/B19306_01/server.102/b14239/rcmbackp.htm#i636377
-
I got the above error while i restore the standby database using RMAN backu
Dear All,
RMAN> crosscheck archivelog all;
using target database controlfile instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=14 devtype=DISK
specification does not match any archive log in the recovery catalogi got the above error while i restore the standby database using RMAN backup from production.
Help need.i take the backup without catalog database.
regards,
DBrman> list backup;
it shows lengthier but i showed only the corresponding
BS Key Type LV Size Device Type Elapsed Time Completion Time
3479 Full 17G DISK 01:29:42 09-FEB-13
BP Key: 3479 Status: AVAILABLE Tag: 09FEB13_FULL_ESMSRV1_DB
Piece Name: /oradatabkp/rman/esmsrv1_full_db_09feb13
SPFILE Included: Modification time: 08-FEB-13
List of Datafiles in backup set 3479
File LV Type Ckp SCN Ckp Time Name
1 Full 1759250260 09-FEB-13 /esmsrv1/dbs/system01.dbf
2 Full 1759250260 09-FEB-13 /esmsrv1/dbs/undotbs01.dbf
3 Full 1759250260 09-FEB-13 /esmsrv1/dbs/cwmlite01.dbf
4 Full 1759250260 09-FEB-13 /esmsrv1/dbs/drsys01.dbf
5 Full 1759250260 09-FEB-13 /esmsrv1/dbs/example01.dbf
6 Full 1759250260 09-FEB-13 /esmsrv1/dbs/indx01.dbf
7 Full 1759250260 09-FEB-13 /esmsrv1/dbs/odm01.dbf
8 Full 1759250260 09-FEB-13 /esmsrv1/dbs/tools01.dbf
9 Full 1759250260 09-FEB-13 /esmsrv1/dbs/users01.dbf
10 Full 1759250260 09-FEB-13 /esmsrv1/dbs/xdb01.dbf
11 Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_default_seg_001.dbf
12 Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_property_ind_seg_001.dbf
13 Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_property_seg_001.dbf
14 Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_upload_ind_seg_001.dbf
15 Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_upload_seg_001.dbf
16 Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_rate_ind_seg_001.dbf
17 Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_rate_seg_001.dbf
18 Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_summary_ind_seg_001.dbf
19 Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_summary_seg_001.dbf
20 Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_overflow_seg_001.dbf
21 Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_overflow_seg_002.dbf
22 Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_summary_seg_002.dbf
23 Full 1759250260 09-FEB-13 /esmsrv1/dbs/perfstat_001.dbf
39 Full 1759250260 09-FEB-13 /esmsrv1/dbs/oem_repository.dbf
BS Key Type LV Size Device Type Elapsed Time Completion Time
3480 Full 17G DISK 01:21:30 09-FEB-13
BP Key: 3480 Status: EXPIRED Tag: TAG20130209T200021
Piece Name: /oradatabkp/rman/esmsrv1/esmsrv1_full_Feb09
SPFILE Included: Modification time: 08-FEB-13
List of Datafiles in backup set 3480
File LV Type Ckp SCN Ckp Time Name
1 Full 1759422265 09-FEB-13 /esmsrv1/dbs/system01.dbf
2 Full 1759422265 09-FEB-13 /esmsrv1/dbs/undotbs01.dbf
3 Full 1759422265 09-FEB-13 /esmsrv1/dbs/cwmlite01.dbf
4 Full 1759422265 09-FEB-13 /esmsrv1/dbs/drsys01.dbf
5 Full 1759422265 09-FEB-13 /esmsrv1/dbs/example01.dbf
6 Full 1759422265 09-FEB-13 /esmsrv1/dbs/indx01.dbf
7 Full 1759422265 09-FEB-13 /esmsrv1/dbs/odm01.dbf
8 Full 1759422265 09-FEB-13 /esmsrv1/dbs/tools01.dbf
9 Full 1759422265 09-FEB-13 /esmsrv1/dbs/users01.dbf
10 Full 1759422265 09-FEB-13 /esmsrv1/dbs/xdb01.dbf
11 Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_default_seg_001.dbf
12 Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_property_ind_seg_001.dbf
13 Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_property_seg_001.dbf
14 Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_upload_ind_seg_001.dbf
15 Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_upload_seg_001.dbf
16 Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_rate_ind_seg_001.dbf
17 Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_rate_seg_001.dbf
18 Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_summary_ind_seg_001.dbf
19 Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_summary_seg_001.dbf
20 Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_overflow_seg_001.dbf
21 Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_overflow_seg_002.dbf
22 Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_summary_seg_002.dbf
23 Full 1759422265 09-FEB-13 /esmsrv1/dbs/perfstat_001.dbf
39 Full 1759422265 09-FEB-13 /esmsrv1/dbs/oem_repository.dbf
BS Key Type LV Size Device Type Elapsed Time Completion Time
3481 Full 4M DISK 00:00:03 09-FEB-13
BP Key: 3481 Status: AVAILABLE Tag: TAG20130209T212205
Piece Name: /oradatabkp/rman/esmsrv1/esmsrv1_controlfile_copy_Feb09
Controlfile Included: Ckp SCN: 1759462488 Ckp time: 09-FEB-13
BS Key Type LV Size Device Type Elapsed Time Completion Time
3482 Full 0 DISK 00:00:01 09-FEB-13
BP Key: 3482 Status: AVAILABLE Tag: TAG20130209T212212
Piece Name: /oradatabkp/rman/esmsrv1/esmsrv1_spfile_copy_Feb09
SPFILE Included: Modification time: 08-FEB-13
ls -l /oradatabkp
root@drsrv1#ls -l /oradatabkp
total 1108672
drwxr-xr-x 2 ovsd dba 96 Sep 27 2009 alert_bkp
-rw-r--r-- 1 oracle dba 195 Mar 15 2007 create.sql
drwxr-xr-x 2 oracle dba 8192 Aug 7 2009 ctrl_bkp
-rw-r--r-- 1 root sys 565114880 Apr 24 2007 drsrv1.tar
drwxrwxrwx 2 root sys 96 Jun 17 2011 drsrv2-ignitebkp
drwxr-xr-x 4 root sys 96 Apr 24 2007 esmsrv1
-rw-r----- 1 root sys 1613824 Feb 22 2007 esmsrv1stby.ctl
-rw-r--r-- 1 esmsrv1 dba 5120 Dec 31 2009 esmtables.dmp
-rw-r--r-- 1 esmsrv1 dba 538 Dec 31 2009 esmtables.log
drwxrwxrwx 4 root sys 8192 Mar 10 2009 export
drwxr-xr-x 8 root sys 8192 Apr 24 2007 finalbackup
-rw-r--r-- 1 oracle dba 3820 Sep 5 2008 invalid.sql
-rw-r--r-- 1 esmsrv1 dba 303104 Dec 31 2009 kirdevports.dmp
-rw-r--r-- 1 esmsrv1 dba 591 Dec 31 2009 kirdevports.log
drwxr-xr-x 2 root root 96 Feb 12 2007 lost+found
-rw-r--r-- 1 oracle dba 24954 Aug 9 2009 ovcontrol-090909.ctl
drwxr-xr-x 22 root sys 8192 Apr 24 2007 ovpi
drwxr-xr-x 2 oracle dba 8192 Aug 7 2009 pfile_bkp
drwxrw-rw- 4 oracle dba 8192 Feb 10 15:25 rman
drwxr-xr-x 28 root sys 8192 Feb 1 17:15 schedbkp
drwxr-xr-x 2 oracle dba 8192 Jul 11 2011 sdnnm
-rw-r--r-- 1 esmsrv1 dba 2196 Dec 31 2009 srirdevports.log
drwxr-xr-x 2 oracle dba 96 Mar 13 2009 statsreport
-rw-r--r-- 1 oracle dba 966 Mar 15 2007 tbs.sql
drwxr-xr-x 5 oracle dba 96 Mar 16 2007 testov
drwxr-xr-x 2 root sys 442368 Mar 11 2009 trendadm_files
root@drsrv1#ls -l /oradatabkp/rman
total 37244448
drwxr-xr-x 2 oracle dba 8192 Feb 10 15:25 esmsrv1
-rw-r----- 1 oracle dba 19068198912 Feb 9 14:21 esmsrv1_full_db_09feb13
drwxrw-rw- 2 oracle dba 8192 Feb 9 21:36 openview
-rw-r--r-- 1 oracle dba 920442 Feb 9 21:37 rmanbkp-all.log -
Standby database using rman backup
I'm using oracle11g on my work place and now i wont to create duplicate database using rman backup.
at the time i installed only oracle 11g software.
Pls guide me to overcome the problem. i'm newcomer to oracle.
Pls give the steps.
Edited by: user10444101 on Apr 30, 2010 2:17 AMuser10444101 wrote:
I'm using oracle11g on my work place and now i wont to create duplicate database using rman backup.
at the time i installed only oracle 11g software.
Pls guide me to overcome the problem. i'm newcomer to oracle.
Pls give the steps.
Edited by: user10444101 on Apr 30, 2010 2:17 AMSee the following link
http://download.oracle.com/docs/cd/B28359_01/backup.111/b28270/rcmdupdb.htm#i1008564 -
Creation of Logical Standby Database Using RMAN ACTIVE DATABASE COMMAND
Hi All,
I am in confusion how to create logical standby database from primary database using rman active database command.
What i did:-
Create primary database on machine 1 on RHEL 5 with Oracle 11gR2
Create standby database on machine 2 on RHEL 5 With Oracle 11gR2 from primary using RMAN active database command
Trying to create logical standby database on machine 3 on RHEL 5 with Oracle 11gR2 using RMAN active database command from primary.
The point which confuse me is to start the logical standby in nomount mode on machine 3 with which pfile like i create the pfile for standby database do i need to create the pfile for logical standby db.
I done the creation of logical standby database by converting physical standby to logical standby database
I am following the below mentioned doc for the same:
Creating a physical and a logical standby database in a DR environment | Chen Guang's Blog
Kindly guide me how to work over the same or please provide me the steps of the same.
Thanks in advance.Thanks for your reply
I already started the logical standby database with pfile in nomount mode. And successfully completed the duplication of database. by mentioning the DB_FILE_NAME_CONVERT and LOG_FILE_NAME_CONVERT parameter.
But i am not able to receive the logs on the above mentioned blog i run the sql command to check the logs but getting "no rows selected"
My primary database pfile is:
pc01prmy.__db_cache_size=83886080
pc01prmy.__java_pool_size=12582912
pc01prmy.__large_pool_size=4194304
pc01prmy.__oracle_base='/u01/app/oracle'#ORACLE_BASE set from environment
pc01prmy.__pga_aggregate_target=79691776
pc01prmy.__sga_target=239075328
pc01prmy.__shared_io_pool_size=0
pc01prmy.__shared_pool_size=134217728
pc01prmy.__streams_pool_size=0
*.audit_file_dest='/u01/app/oracle/admin/pc01prmy/adump'
*.audit_trail='db'
*.compatible='11.1.0.0.0'
*.control_files='/u01/app/oracle/oradata/PC01PRMY/controlfile/o1_mf_91g3mdtr_.ctl','/u01/app/oracle/flash_recovery_area/PC01PRMY/controlfile/o1_mf_91g3mf6v_.ctl'
*.db_block_size=8192
*.db_create_file_dest='/u01/app/oracle/oradata'
*.db_domain=''
*.db_file_name_convert='/u01/app/oracle/oradata/PC01SBY/datafile','/u01/app/oracle/oradata/PC01PRMY/datafile'
*.db_name='pc01prmy'
*.db_recovery_file_dest='/u01/app/oracle/flash_recovery_area'
*.db_recovery_file_dest_size=2147483648
*.diagnostic_dest='/u01/app/oracle'
*.dispatchers='(PROTOCOL=TCP) (SERVICE=pc01prmyXDB)'
*.fal_client='PC01PRMY'
*.fal_server='PC01SBY'
*.log_archive_config='DG_CONFIG=(pc01prmy,pc01sby,pc01ls)'
*.log_archive_dest_1='LOCATION=/u01/app/oracle/flash_recovery_area/PC01PRMY/ VALID_FOR=(ONLINE_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=pc01prmy'
*.log_archive_dest_2='SERVICE=pc01sby LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=pc01sby'
*.log_archive_dest_3='SERVICE=pc01ls LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES, PRIMARY_ROLE) DB_UNIQUE_NAME=pc01ls'
*.log_archive_dest_state_1='ENABLE'
*.log_archive_dest_state_2='DEFER'
*.log_archive_dest_state_3='DEFER'
*.log_archive_max_processes=30
*.log_file_name_convert='/u01/app/oracle/oradata/PC01SBY/onlinelog','/u01/app/oracle/oradata/PC01PRMY/onlinelog'
*.open_cursors=300
*.pga_aggregate_target=78643200
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.sga_target=236978176
*.undo_tablespace='UNDOTBS1'
My logical standby pfile is:-
pc01ls.__db_cache_size=92274688
pc01ls.__java_pool_size=12582912
pc01ls.__large_pool_size=4194304
pc01ls.__oracle_base='/u01/app/oracle'#ORACLE_BASE set from environment
pc01ls.__pga_aggregate_target=79691776
pc01ls.__sga_target=239075328
pc01ls.__shared_io_pool_size=0
pc01ls.__shared_pool_size=125829120
pc01ls.__streams_pool_size=0
*.audit_file_dest='/u01/app/oracle/admin/pc01ls/adump'
*.audit_trail='db'
*.compatible='11.1.0.0.0'
*.control_files='/u01/app/oracle/oradata/PC01LS/controlfile/o1_mf_91g3mdtr_.ctl','/u01/app/oracle/flash_recovery_area/PC01LS/controlfile/o1_mf_91g3mf6v_.ctl'
*.db_block_size=8192
*.db_create_file_dest='/u01/app/oracle/oradata'
*.db_domain=''
*.db_file_name_convert='/u01/app/oracle/oradata/PC01SBY/datafile','/u01/app/oracle/oradata/PC01PRMY/datafile'
*.db_name='pc01prmy'
*.db_unique_name='pc01ls'
*.db_recovery_file_dest='/u01/app/oracle/flash_recovery_area'
*.db_recovery_file_dest_size=2147483648
*.diagnostic_dest='/u01/app/oracle'
*.dispatchers='(PROTOCOL=TCP) (SERVICE=pc01prmyXDB)'
*.log_archive_config='DG_CONFIG=(pc01prmy,pc01sby,pc01ls)'
*.log_archive_dest_1='LOCATION=/u01/app/oracle/flash_recovery_area/PC01PRMY/ VALID_FOR=(ONLINE_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=pc01prmy'
*.log_archive_dest_2='LOCATION=/u01/app/oracle/flash_recovery_area/PC01LS/ VALID_FOR=(STANDBY_LOGFILES,STANDBY_ROLE) DB_UNIQUE_NAME=pc01ls'
*.log_archive_dest_3='SERVICE=pc01ls LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES, PRIMARY_ROLE) DB_UNIQUE_NAME=pc01ls'
*.log_archive_dest_state_1='ENABLE'
*.log_archive_dest_state_2='ENABLE'
*.log_archive_max_processes=30
*.log_file_name_convert='/u01/app/oracle/oradata/PC01SBY/onlinelog','/u01/app/oracle/oradata/PC01PRMY/onlinelog'
*.open_cursors=300
*.pga_aggregate_target=78643200
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.sga_target=236978176
*.undo_tablespace='UNDOTBS1'
Kindly advice over the same -
Creating standby database using data guard.
Current Env:
Oracle 11.2.0.1
ASM
Size 1.7T and growing.
I'm rebuilding a standby database and need to use rman because of a few factors. In the past, I did a file copy create a standby control file config init.ora and it always worked.
We have a database and had the stanby build; but someone issued a flashback and corrupted the standby database.
Because of the size 1.7T and growing and we are now using ASM.
My research is only showing building standby through rman using dupicate database command.
I would like to copy the cold backup to a external drive and ship it to the standby site where I'll do the restore. This is because of time and bandwith required to rebuild the standby will interfere with operaitions for the period the files are being copied.
So what would be the high level steps.
1) get the cold backup
2) create the standby control file
3) ship the data via corrier
4) restore the database
5) and this is where i'm not sure. recover the standby control file - but during the restore of the database the "normal" control file will open and perhaps do a checkpoint. therefore the standby controlfile will be usless.
6) recover the standby database.
Has anyone accomplished this?
As much specifics will be helpful. This system is operational and needs to be done right the first time.
thanks,
-RobThank you.
1) I'm going to off load the cold backup to an external drive and have a courier take it to the DR site.
Why, we are replicating the SAN over to the DR site. When SAN replication backs up Oracle becomes non-responsive. Therefore; sending the data over the pipe is not an option for the standby rebuild. Yea' that's the easy way to do it. But this system is operational and critical to operations; so we will not risk saturating the pipe for any period of time. The pipe got saturated one time and it was not pretty.
2) I'm running the test in my lab to make sure I can create the standby database using the cold backup and rman.
3) In the past it was easy; I got a cold backup of the data files using the same ksh scripts that have been working for 20 years. Copy the files over to the standby site, and put it into managed recovery. This technique has been working fine sense Oracle 8i days. ASM through a huge monkey wrench in the ksh script backup and now I'm forced to use rman. Hey, I'm told it's an okay product but when it comes to backups I never get fancy; that just makes things more complicated. Okay I wont complain about asm anymore, i guess there is an advantage in there somewhere.
-Rob -
To create standby database using oracle 10g standared edition
my producation database is oracle 10G standard edition .Can i implement a oracle dataguard or standby database using standard edition licenses.if standby database is possiable in standard edition .what are the steps for creating a standby database using oracle 10g standard edition.
General answer is http://download.oracle.com/docs/cd/B19306_01/license.102/b14199/editions.htm#BABJICBB.
For Data Guard you cannot :
- use instance parameters to automatically send archived redo logs
- use instance parameters to resolve archived redo logs gaps
- create a logical standby
- use SQL statements to do switchover / failover
- use Data Guard Broker. -
Create new database using rman cold backup
It oracle 10g database version 10.2.0.4
I took the cold backup of the database using rman ( Database name TEST)
1.RMAN> startup mount;
2.RMAN> backup database include current controlfile;
3.RMAN> alter database open;
I aim to create the new database called DEMO using this backup
Please let know the setps for creating new database
Edited by: prajeevan on Jan 19, 2011 9:09 PMI took the cold backup of the database using rman ( Database name TEST)
1.RMAN> startup mount;
2.RMAN> backup database include current controlfile;
3.RMAN> alter database open;
I aim to create the new database called DEMO using this backup
Please let know the setps for creating new databaseIf it is in archivelog mode you can use duplicate to refresh database DEMO from TEST..
or after cold backup, go to mount ,
create trace file of controlfile becuase you are chaning database name
recreate the controlfile
open database in resetlogs;
check also http://blogs.oracle.com/AlejandroVargas/gems/RMANDUPDBPRACTICE.pdf -
Create standby DB using RMAN in Oracle10.2 standard ediction
I am tring to create a standby DB in different host with different directory using RMAN. when I issued the command <duplicate target database for standby>, RMAN gave the error msg as follow:
Starting restore at 02-MAY-06
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: sid=78 devtype=DISK
creating datafile fno=1 name=/export/database/oracle/HTS1/system01.dbf
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 05/02/2006 11:24:28
RMAN-03015: error occurred in stored script Memory Script
RMAN-06136: ORACLE error from auxiliary database: ORA-01180: can not create datafile 1
ORA-01110: data file 1: '/export/database/oracle/HTS1/system01.dbf'
Path '/export/database/oracle/HTS1' exists in the standby host and permission are granted, some initial parameter for standby DB was set to:
db_file_name_convert='/export/home/oracle/oradata/HTS1','/export/database/oracle/HTS1'
log_file_name_convert='/export/home/oracle/oradata/HTS1','/export/database/oracle/HTS1'
db_create_file_dest='/export/database/oracle/HTS1'
Can anyone shed some light on the cause of this error? Thanks
JacksonI found the reason. it was because of the the backup set not available.
But after I prepare the backup set at hte primary host, rman still gave err msg:
RMAN> duplicate target database for standby;
Starting Duplicate Db at 02-MAY-06
using target database control file instead of recovery catalog
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: sid=78 devtype=DISK
contents of Memory Script:
restore clone standby controlfile;
sql clone 'alter database mount standby database';
executing Memory Script
Starting restore at 02-MAY-06
using channel ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: starting datafile backupset restore
channel ORA_AUX_DISK_1: restoring control file
channel ORA_AUX_DISK_1: reading from backup piece /export/home/oracle/flash_recovery_area/HTS1/backupset/2006_05_02/o1_mf_ncnnf_TAG20060502T131953_25ftztpo_.bkp
ORA-19870: error reading backup piece /export/home/oracle/flash_recovery_area/HTS1/backupset/2006_05_02/o1_mf_ncnnf_TAG20060502T131953_25ftztpo_.bkp
ORA-19505: failed to identify file "/export/home/oracle/flash_recovery_area/HTS1/backupset/2006_05_02/o1_mf_ncnnf_TAG20060502T131953_25ftztpo_.bkp"
ORA-27037: unable to obtain file status
SVR4 Error: 2: No such file or directory
Additional information: 3
failover to previous backup -
Create standby database using restore backup
Hi,
I am creating a standby database 11g using manual process of restoring a backup , but to no avail. I can not even restore the backup successfully.
This is the steps I followed (courtesy of ORACLE-BASE) ORACLE-BASE - Data Guard Physical Standby Setup in Oracle Database 11g Release 2
I am confused about these steps:
Copy the files from the primary to the standby server.
Copy Standby controlfile to all locations.
$ scp oracle@ol5-112-dga1:/tmp/db11g_stby.ctl /u01/app/oracle/oradata/DB11G/control01.ctl
$ cp /u01/app/oracle/oradata/DB11G/control01.ctl /u01/app/oracle/fast_recovery_area/DB11G/control02.ctl
My question is, for the 2nd copy, do I need to shutdown the primary db? since control01.ctl is being updated all the time?
Can I not used the standby ctl (db11g_stbg.ctl) and copy it to /u01/app/oracle/fast_recovery_area/DB11G/control02.ctl instead?
Your assistance is highly appreciated.f55237a7-2c38-4db3-a7a3-1d77256f0730 wrote:
Hi,
I am creating a standby database 11g using manual process of restoring a backup , but to no avail. I can not even restore the backup successfully.
This is the steps I followed (courtesy of ORACLE-BASE) ORACLE-BASE - Data Guard Physical Standby Setup in Oracle Database 11g Release 2
I am confused about these steps:
Copy the files from the primary to the standby server.
Copy Standby controlfile to all locations.
$ scp oracle@ol5-112-dga1:/tmp/db11g_stby.ctl /u01/app/oracle/oradata/DB11G/control01.ctl
$ cp /u01/app/oracle/oradata/DB11G/control01.ctl /u01/app/oracle/fast_recovery_area/DB11G/control02.ctl
My question is, for the 2nd copy, do I need to shutdown the primary db? since control01.ctl is being updated all the time?
Can I not used the standby ctl (db11g_stbg.ctl) and copy it to /u01/app/oracle/fast_recovery_area/DB11G/control02.ctl instead?
Your assistance is highly appreciated.
Hi,
You are created standby control file on primary and copied to standby side:
$ scp oracle@ol5-112-dga1:/tmp/db11g_stby.ctl /u01/app/oracle/oradata/DB11G/control01.ctl
And now, in paramter files, you have CONTROL_FILES parameter as below :
control_files='/u01/app/oracle/oradata/DB11G/control01.ctl', '/u01/app/oracle/fast_recovery_area/DB11G/control02.ctl'
it means you must copy controlfile IN standby side to second control file. Control files must be same.
$ cp /u01/app/oracle/oradata/DB11G/control01.ctl /u01/app/oracle/fast_recovery_area/DB11G/control02.ctl
My question is, for the 2nd copy, do I need to shutdown the primary db? since control01.ctl is being updated all the time?
You not need shutdown priamry database, becuase you copied standby control file to standby side, and all operations goin in standby side.
Can I not used the standby ctl (db11g_stbg.ctl) and copy it to /u01/app/oracle/fast_recovery_area/DB11G/control02.ctl instead?
Yes, you can use (db11g_stbg.ctl) standby controlfile
Regard
Mahir M. Quluzade -
Creating Standby database using Cloud Control 12C
Hi,
I want to setup Standby database for my existing RAC database, Both standby and PRimary databases are on 11.2.0.3 and we are using "Cloud Control 12C".
After specifing and testing the Host creddential and Database credentials and choosing the Backup method when I click next I get following error message
"Username- The Specified user must own the source database oracle server installation."
I am giving the host credential as oracle, we use single os user "Oracle" for all our installation and administration.
This is AIX OS and 11.2.0.3 database installation.
Any help will be appreciated.
Regards
BhushanGuys,
After searching for 2 days on web and raising question on OTN, in the last we resolved the issue. The issue was registering the primary database with correct oracle binaries.
We have 2 set of binaries Oracle Infrastructure and Oracle RDBMS, The database was register in 12C with Oracle Infrastructure binaries. I changed that and every thing is working soomth.
regards
bhushan -
Problem creating physical Standby database with RMAN
Hi All
I am trying to learn oracle dataguard and as part of the process learning creating standby database.
Platform : Sun-Fire-V250 Sparc, Solaris 10
Database Version - Oracle 11R2
I am creating standby database on same server, so directory structure is different.
Following the instructions on Oracle site I managed to create a functional physical standby database. But I am not able to create standby database using RMAN. These are the steps that I followed-
1.Set up all necessary parameters on primary database as done while creating physical standby database manually, eg setting force logging, creating standby logs etc.
2.Edited parameter file on primary database as done while creating manual pysical standby database creation. Some of the changes done are-
On Primary Database:
*.FAL_CLIENT='orcl11020' #Primary database unique name
*.FAL_SERVER='stdby_11' #Standby database unique name
db_file_name_convert='/<dir>/oradata/stdby_11','/<dir>/oradata/orcl11020'
log_file_name_convert='/<dir>/oradata/stdby_11','/<dir>/oradata/orcl11020','/<dir>/oradata/stdby_11/redo_mem','/<dir>/oradata/orcl11020/redo_mem'
standby_file_management=auto
*.log_archive_config='DG_CONFIG=(orcl11020,stdby_11)'
*.log_archive_dest_1='LOCATION=/<dir>/flash_recovery_area/ORCL11020/archivelog
VALID_FOR=(ALL_LOGFILES,ALL_ROLES) db_unique_name=orcl11020'
*.log_archive_dest_2='SERVICE=stdby_11 LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) db_unique_name=stdby_11'
*.LOG_ARCHIVE_DEST_STATE_1='ENABLE'
*.LOG_ARCHIVE_DEST_STATE_2='ENABLE'
*.LOG_ARCHIVE_FORMAT='%t_%s_%r.arc'
*.LOG_ARCHIVE_MAX_PROCESSES=30
Copied same pfile for standby database and modified following-
*.control_files='/<dir>/oradata/stdby_11/stdby_11.ctl','/<dir>/fra_stdby/stdby_11/stdby_11.ctl'
*.db_name='orcl1102'
*.db_unique_name='stdby_11'
*.FAL_CLIENT='stdby_11'
*.FAL_SERVER='orcl11020'
db_file_name_convert='/<dir>/oradata/orcl11020','/<dir>/oradata/stdby_11'
log_file_name_convert='/<dir>/oradata/orcl11020','/<dir>/oradata/stdby_11','/<dir>/oradata/orcl11020/redo_mem','/<dir>/oradata/stdby_11/redo_mem'
standby_file_management=auto
*.log_archive_dest_1='LOCATION=/<dir>/fra_stdby/STDBY_11/archivelog
VALID_FOR=(ALL_LOGFILES,ALL_ROLES) db_unique_name=stdby_11'
*.log_archive_dest_2='SERVICE=orcl11020 LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE)
db_unique_name=orcl11020'
3. Add relevant information in tnsnames.ora and listener.ora files and then restart listener.
3. Created password file with same credential as primary database.
4.Up-to-date RMAN backup of primary database available.
5.Create standby controlfile with rman
While primary database s open (I tried with primary database in mount mode as well)-
$>rman catalog rman/paswd@rman target /
RMAN> BACKUP CURRENT CONTROLFILE FOR STANDBY;
6. Open a new terminal and startup standby database in nomount mode using parameter file created -
$>ORACLE_SID=stdby_11
$>export ORACLE_SID
$>sqlplus / as sysdba
SQL>STARTUP NOMOUNT pfile='<location/initfilename.ora'
SQL>quit
$> rman AUXILIARY / target sys/passwd@orcl11020 catalog rman/passwd@rman
RMAN>DUPLICATE TARGET DATABASE FOR STANDBY DORECOVER;
RMAN finishes without error but archive logs are not being tranported. Looking at the log, following caught my eye-
Error 1017 received logging on to the standby
Check that the primary and standby are using a password file
and remote_login_passwordfile is set to SHARED or EXCLUSIVE,
and that the SYS password is same in the password files.
returning error ORA-16191
FAL[client, ARC2]: Error 16191 connecting to orcl11020 for fetching gap sequence
Errors in file /<>dir>/diag/rdbms/stdby_11/stdby_11/trace/stdby_11_arc2_24321.trc:
ORA-16191: Primary log shipping client not logged on standby
Errors in file /<dir>/diag/rdbms/stdby_11/stdby_11/trace/stdby_11_arc2_24321.trc:
ORA-16191: Primary log shipping client not logged on standby
So on both primary and standby I confirmed
SQL> show parameter remote_login_passwordfile
NAME TYPE VALUE
remote_login_passwordfile string EXCLUSIVE
To make double sure that password files are same, I shutdown both databases, delete password files and recreated with same credentials.
Password files are called - orapworcl11020 and orapwstdby_11
Can someone guide me where thisngs are going wrong here please.Not sure if I understood it clearly.
SELECT * FROM V$ARCHIVE_GAP;
returns no rows so there is no gap.
But could you please explain me the result of the previous query. To catch up again, on standby when I check
SELECT SEQUENCE#,APPLIED FROM V$ARCHIVED_LOG
SEQUENCE# APPLIED
75 NO
74 NO
76 NO
77 NO
I understand that though archive files have been copied across but they are not applied yet.
On primary when I give your query -
SELECT name as STANDBY,SEQUENCE#,applied, completion_time
2 FROM v$archived_log
3 where dest_id=2
4 and sequence# BETWEEN 74 and 80;
I get -
STANDBY SEQUENCE# APPLIED COMPLETIO
stdby_11 74 YES 28-JUN-11
stdby_11 75 YES 28-JUN-11
stdby_11 76 YES 29-JUN-11
stdby_11 77 YES 29-JUN-11
stdby_11 78 YES 29-JUN-11
stdby_11 79 YES 29-JUN-11
stdby_11 80 YES 29-JUN-11
stdby_11 75 NO 07-JUL-11
stdby_11 74 NO 07-JUL-11
stdby_11 76 NO 07-JUL-11
stdby_11 77 NO 07-JUL-11
stdby_11 78 NO 07-JUL-11
I have intentionally given
sequence# BETWEEN 74 and 80
because I know in the current incarnaion of the database, max sequence is 78.
So my understanding is, the rows between 28-29 June are from previous incarnation, correct me if I am wrong
Archive files of the current incarnation, since I successfully created standby database are shipped but yet to be applied - am I right?
Then my final question is, when will these archives be applied to standby database?
I am sorry to ask too many questions but I am just trying to understand how it all works.
Thanks for your help again -
Standby Database with RMAN on ASM
Hi,
I am using redhat Linux AS 4 and my database is 10.2.0.1. This database used ASM for storage of data files, control files, online redo logs. Flash recovery area is also configured in the ASM.
I want to create a physical standby database on a different machine by using RMAN. Can someone kindly point me to some easy to follow document? I have scoured the oracle docs, but am more confused than ever.
regardsStep By Step Guide To Create Physical Standby Database Using RMAN [ID 469493.1]
Note: the examples in this document use regular filesystems but the process is the same regardless, ie, in db_file_name_convert use your diskgroup rather than a filesystem (db_file_name_convert=+DG_SOURCE,+DG_TARGET)
another note to complement the first one:
Step By Step Guide On Creating Physical Standby Using RMAN Duplicate In ASM Filesystem For ASM Primary [ID 837102.1]
Edited by: rui_catcuddler on Sep 2, 2010 6:51 AM
Maybe you are looking for
-
Multiple text fields on the same line
Hi Is it possible to have multiple text boxes on the same form line? I'm trying to replicate a form I've created usng Acrobat X Pro but can't seem to figure how to do it with FormsCentral? Apologise if I'm missing something obvious!
-
How to create a group mailing list?
how to create agroup mailing list?
-
Hi Experts, How to find what is the maximum number of processes configured on instance. spfile has the parameter, is there any query which can return same? v$process and v$session seems will not help much. Please suggest. Regards - Neuron
-
Hello, In a couple of days I'm going to upgrade my computer/motherboard to one with UEFI, and I thought I'd start with the preparations right now. I've think I've read up on most of it, but I'd like to make sure before I begin tinkering. - I'd like t
-
Is Lr part of my $20/m membership in Creative Cloud single app?
Is Lr part of my $20/m membership in Creative Cloud single app?