Creating Tables for COPA ( Non standard)

Dear SAP Gurus,
Pls adivse what is the easiest way to create non-standard tables for COPA ??
In addition to CE1XXXX; CE2XXXX; CE3XXXX; CE4XXXX & also COEP; COEJ; COSS; COSP; We need to create additional tables to store the data and then perform certain calcuations before taking forward to COPA reports.
Appreciate early response.
Regards
AJA

I don't think that CO-PA allows you to create non-SAP CO-PA tables. Not sure what you are trying to do. The tables used by CO-PA are standard and they will be automatically generated based on the configuration of the operating concern. I guess, you could create non-SAP tables but not aware of any functionality that will populate those tables unless you create some program code to fill them with data. You can add deriviation rules to derive charateristics from other charateristic but that is standard functionality that can be configured within standard CO-PA.

Similar Messages

Can AAMEE 3.1 create pkg for CS6 Design Standard? or just CS6 Mast Collection?

can AAMEE 3.1 create pkg for CS6 Design Standard? or just CS6 Mast Collection?

ok, thanks, just wanted to make sure. I have a volume serial no. for CS6 Dest Stan.
AAMEE 3.1 is for CS6 Suite, so should be good for all CS6
I created a pkg for CS6 Mast Coll using AAMEE 3.1 a few months ago and works fine (.msi)

Validity table for a Non-Cumulative key figure

Hi,
I need to make changes to a validity table for a Non-Cumulative key figure.
I know initially it is done thru Extras- > Maintain Non-Cumulative value but subsequently how to change the parameters ?
Best Regards,
-Anurag Dev

If you decide later that you require more validity-determining characteristics, you can modify the selection using the report RSDG_CUBE_VALT_MODIFY. In this report, the non-cumulative InfoCube is only changed to the extent that the new validity-determining characteristics are selected and the validity table is reconstructed. The structure of the non-cumulative InfoCube remains the same. You do not have to reload the transaction data for it.

Do I need to install Oracle database 12c on PC to create tables for Weblogic server

Hi,
I am new to WebLogic and I am following a book Java EE Development
with Eclipse published by PACKT Publishing to learn Java EE. I have installed Oracle Enterprise Pack for Eclipse
on the PC and I am able to log into the WebLogic Server
Administration Console and set up a Data Source. However the next step is to create
tables for the database. The book says that the tables can be
created using SQL script run from the SQL command line.
I cannot see any way of inputting SQL script into the WebLogic
Server Admistration Console. Aslo there is no SQL Command line
in DOS.
I have put a previous question on the Oracle Forum about the above and I was advised to use SQL Plus
to create the tables for the weblogic server but no mention was made of installing Oracle database.
I have downloaded InstantClient SQL Plus and Instantclient Basic on a PC and
put the files into the same directory C:\SQLPlus but now I am having a problem in that it is
looking for a username and password when I run the sqlplus.exe file.
Now I assume that I need to have an installation of Oracle databse on the
PC so as to be able to use SQL Plus. Am I correct in this or can I create tables for the
datasource in weblogic without an Oracle database?
Thanks in advance for your help. Brian

You should install it separately and also need to change the OBIEE's user.sh to tell it where is your Oracle client installed.

Is it possible to create deployment for Adobe Acrobat Standard XI ?

Hi I tried to create deployment for Adobe Acrobat Standard Product, But I could not find the source file for Acrobat standard deployment !!
Kindly help !!

Hello Anubha,
Yes, it can be deployed.
Kindly follow the link to understand the deployment steps in detail.
http://blogs.adobe.com/acrolaw/2013/02/acrobat-xi-deployment-guide-for-large-firms/
Thanks,
Sudhakar Kuttuva
Senior Associate (Training & Technical Support)
M: +971 56 7709424
T: +971 4 4471400
F: +971 4 4471411
E: [email protected]<mailto:[email protected]>
ISO 9001 Company W: www.caddemirates.com<http://www.caddemirates.com/>
PO Box No. 50640, 9th Floor – PRISM TOWERS, Business Bay, Sheikh Zayed Road, Dubai, UAE.
IT Infrastructure | CAD & Engineering Solutions | HOSTECH – Hospitality Solutions | Networking & Security Solutions |
Disclaimer: This communication contains information that is confidential, proprietary in nature and/or privileged. It is for the exclusive use of the intended recipient(s). If you are not the intended recipient(s) or the person responsible for delivering it to the intended recipient(s), please note that any form of dissemination, distribution or copying of this communication is strictly prohibited and may be unlawful. If you have received this communication in error, please immediately notify the sender and delete the original communication. Please be advised that neither CADD Emirates, its affiliates, its employees or agents accept liability for any errors, omissions or damages caused by delays of receipt or by any virus infection in this message or its attachments, or which may otherwise arise as a result of this e-mail transmission. Thank you for your cooperation.
Please consider the environment before printing this email message.

How to create tables for control data

HI
How to create tables for controls of types of data (screen control)? what is the process for this
Regards,
Anil

Well, do you want to do it the easy way? If so, then just create a table maintenance program. You can do this via SE11, utilites, table maintenance generator. The table maintenance will be generated and you can then maintain the table via SM30.
If you want to go the more challenging way, you can write your own table maintenance program using a table control on your screen. You can use the table control wizard to help you along.
Regards,
Rich Heilman

How to create substituion for COPA value fields?

Hi,
In OBBH i cannot find a destination field for copa value fields. The destination fields are always from SAP standard tables like BKPF and so on.
In this case how can i create a substitution to assign values to COPA value fields?

Hi,
I can see only the following entries in my OBBH user exit, so what is difference between COPA0002 and these :-
SCO10
SGJF1
SGJA1
SGJA2
SGJA3

How to create report for Slow / Non moving inventory

Hi
I want to create one report Slow / Non moving inventory reports.
I need it in following form
Plant Material Desc UOM Current stock Value Last consumption date Last Movement date
I have found & confirmend table & fields names from which data should come into this report which is as follows
Plant(T001L - WERKS) Material(MARA - MATNR) Desc(MAKT - MAKTX) UOM(MARA - MEINS ) Current stock(MARD - LABST) Value(MBEW-SALK3.) Last consumption date (BUDAT - MKPF) Last Movement date(BUDAT - MKPF)
As I am creating this report at first time, I am not getting how to go ahead.
Do I need to create new datasource as existing datasource doesnt have all of these fields..
Please help me.
Dont send me links & documents which are there on sdn. I already have gone through it.
Thanks
Swati

Hi
You have to create Generic Data source as you know the filed/tables names.
Hope you know how to build a Generic Delta or else.https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
Create a Generic Data Source
a). Select the Data Source type and assign a technical name to it.
b). Choose Create The screen for creating a generic Data Source appears.
3. a) Choose an application Component to which the data source is to be assigned.
b) Enter the descriptive texts. You can choose these freely.c) Choose Generic Delta.
4. Specify the delta-specific field and the type for this field. Maintain thesettings for the generic delta:
Specify a safety interval. (NOTE: Safety interval should be set sothat no document is missed u2013 even if it
was not stored in the DB table whenthe extraction took place.
4. Select Delta type: New status for changed records (I.e.after-image); This can be used with Data target ODS (AIE). Additive Delta (I.e. aggregated data records) (ADD)Then choose Save.
6. After step 4, the screen of step 3 comes back. Now choose Save again. This will generate the data source. After generating the data source, you will see the Delta Update flag selected.
7. Choose Save again.
Hope it helps

NESTED Tables for Sub-types when creating table for Super-type

If I create the following types, as an example:
Person with subtypes: Employee and Customer
Appointment
CREATE OR REPLACE TYPE Person_OT AS OBJECT (
person#                         NUMBER,
personSurname                    VARCHAR2(50),
personForenames               VARCHAR2(50),
personDateOfBirth               DATE,
personAddress                    Address_OT,
) NOT FINAL ;
CREATE OR REPLACE TYPE Employee UNDER Person_OT (
empSalary               NUMBER,
empNoSales          NUMBER,
makes               Appointment_List_OT
) FINAL ;
CREATE OR REPLACE TYPE Appointment_OT AS OBJECT (
some attributes
CREATE OR REPLACE TYPE Appointment_List_OT AS TABLE OF REF Appointment_OT ;
When creating the table to hold objects of Person type, how can the requisite nested table for representing 'makes' be declared? The below approach is not correct, however the table will not compile without naming the nested tables.
CREATE TABLE Person_TBL OF Person_OT (
Person#     PRIMARY KEY)
NESTED TABLE makes STORE AS Appointment_List_NTBL;
Advice very much appreciated!

CREATE TABLE Person_TBL OF Person_OT(
Person# PRIMARY KEY)
NESTED TABLE TREAT(SYS_NC_ROWINFO$ AS EMPLOYEE).MAKES STORE AS Appointment_List_NTBL
Table created.
SQL> select * from user_nested_tables
2 /
TABLE_NAME                     TABLE_TYPE_OWNER
TABLE_TYPE_NAME                PARENT_TABLE_NAME
PARENT_TABLE_COLUMN
STORAGE_SPEC                   RETURN_TYPE          ELEMENT_SUBSTITUTABLE
APPOINTMENT_LIST_NTBL          SCOTT
APPOINTMENT_LIST_OT            PERSON_TBL
TREAT(SYS_NC_ROWINFO$ AS "SCOTT"."EMPLOYEE")."MAKES"
                       DEFAULT                VALUE                         N
SQL> SY.

Creating accruals for GR non-valuated

Hi Guys,
By using the multiple account assignment feature in PO, it activates the GR non-valuated indicator that prevent the MIGO from creating its intermidiary transaction:
<b>Acc/DR Expenses accounts
Acc/CR GI/IR Account 400301</b>
Is there possibility to create accruals for the GR non-valuated received goods automatically in case the invoice was not received before the month closing??
If not so from were I can get a report of the opened balances to perform the accrual process manually???
Your reply is highly appreciated

Thanks for your replies,
But what report can I generate to give the list of Gr non-valuated received goods
I want a report that can show the total value of the received goods (related only to the non-valuated PO), the PO number, the internal order/Cost center, etc.....
Please this report is very important for me and I don't think it doesn't exists.
<b>Yor reply is highly appreciated</b>

CREATE TABLE for another OWNER/SCHEMA and in another TABLESPACE?

I am logged in a SYSTEM user. Now I want to create a table aaa. The owner of this table should not be SYSTEM but user KARL. and the TABLESPACE should not be SYSTEM but the (existing) TABLESPACE tttt.
As far as I know I can achieve this by issuing the following command:
CREATE TABLE KARL.aaa ( a INTEGER, .......) TABLESPACE tttt;
Regarding the TABLESPACE parameter I am not sure. Is it possible to allocate a TABLE for User Karl in a TABLESPACE which is not assigned to him?
Furthermore I have an additional problem.
I have a script with hundreds of CREATE TABLE + ALTER TABLE + CREATE INDEX DDL statements.
All of them are not prepended with Schema/Owner and an TABLESPACE clause.
Can I put somehow one single instruction at the top of the script which telles Oracle
to use
- OWNER Karl as Schema/Owner for all subsequent DDL stements
- TABLESPACE tttt as TABLESPACE for all subsequent DDL stements
In MYsql there is a "use <database>" statement. Is there soemthing similar for Oracle?
Thank you
Peter

Yes... you can do that. Take for example a user A who has a secret password that you don't wish to give out... like an application schema. User B needs to make tables/objects in schema A and you want to track what user B is doing. First setup Oracles Fine Grained Auditing and then grant "connect through" from user A to user B as follows:
SQL> create user b identified by abc123
2    quota unlimited on users;
User created.
SQL> grant create session to b;
SQL> create user a identified by abc123
2    quota unlimited on users;
User created.
SQL> grant create table
2      , create session
3     to a;
Grant succeeded.
SQL> alter user a grant connect through b;
User altered.
SQL> connect b[a]/abc123@a486
Connected.
SQL> show user
USER is "A"
SQL> create table a.my_proxy_table
2 ( c1 number
3 , c2 varchar2(50)
4 , c3 date
5 );
Table created.-----
See that I connected using the "username[proxyuser]" syntax. Also notice that user B is by proxy user A, illustrated by my "show user" command. The connect through can be granted/revoked as needed without divulging A's password to B. In addition, your audit tables or xml logs will track the fact that user B created table a.my_proxy_table.
Hope this helps,
John

Creating Tcode for COPA(KE30) report

Hi ,
i need to create Tcode for KE30 report
through SE93 i tried with option transaction with parameters here i need to give Ke30 report name
for ex :GP4BW2S4QUBUNA68Y2YXMIW8V6X
but program name last 3 letters will change in production system
how to create T-code with out effecting in other system
Thnaks,
kamalakar

Hi,
Try to create custom t-code for KE30report using transaction with Variant.
go to t-code SHD0 and create a transaction variant for the t-code KE30..
and next go to se93> select transaction with Variant> enter transaction and transaction variant and
-->save and activate..
Prabhudas

Create table for existing table

dear all
I have a partition table with millions records and i want to create table from that table
and i want the new table that i create it is contain the same structure(partition) and contain all data
i write this code
create table abc as select * from cda;
but this script donot work as i want (same structure(partition) and contain all data)
so anybody can help me
best regards

And it is not possible to alter the structure of the table in place? It sounds like you are going to be copying all the data from the current table to a new table and then back to the existing table once the existing table has been altered-- that is going to be very expensive in terms of resources, time, downtime windows, etc. Generally, you can just alter the table in place...
Assuming you really want to copy all the data twice, and that the new (staging?) table really needs to have the same partitioning scheme as the primary, the DBMS_METADATA suggestion would seem to work. Moving the data from the exisiting table to the staging table, you might consider partition exchange if you want the staging table to have the same indexes that the current table has.
Justin

Creating table withtranslation via the standard SAP translation method

Hi All,
i have created a Z_test table with fields mandt, field ,spras, and field discription.
I have created a maintanence gererator for table Z_test where i use to maintain description in different languages
like EN and DE.
but instead of this i want to use standard SAP translation method for translation(instead of maintaining in various languages)
can any one help

Hi Pankaj,
In the standard table say example MAKT in which Maktx is for material descriiption.
Now when you create a material using MM01 in EN language say your language the description get stores in english language..
similary if you login in DE language and create a material using MM01 te description for the material gets stored in login language in maktx field.. This is how it works for different logon languages..
so if you are fectching the maktx from makt you can use in the below way
select matnr
          maktx
         from makt
         into table itab
        where matnr = 'your required material number' and
                    spras = sy-langu.
now by the above select statment it gets the description in your logon language..
I guess there is no transalation given by sap to transalate the records from one language to other language.. I surely believe there is no such option given for your case.
In your case you need to use
select mandt
          field
         spras
         fielddes
         from Z_test
        into itab
        where spras = sy-langu.
you will get the descrition in your logon language.
Regards
Satish Boguda

How to create tables for using in SQL/php website

Sorry for asking basic question because I 'm knew.
i was building a dw site for listing multiple products. i was following DW, the Missing Manual book tutorials. The tutorial offers downloadable data tabels in a folder with .sql extension. I just cannot find anywhere an instruction as how the .sql folder is created.
Second question: if it can be created in Access 2007, please tell me how.
thank you sooo much.

Hi Walt,
Thank you so much for spending the time trying to answer me.
you are right, it is a .sql file, not a folder. However, once it is imported into MySQL server, it spits out 4 tables. Please see the following tutorial steps:
"4. in phpMyAdmin's top navigation bar, click the Import button.
Doing so takes you to a page that lets you type in an SQL query or load a test file that has SQL commands in it. You'll do the latter-load a text file that contains all the SQL necessary to create the tables and data for the database.
5. Click the Browse button in XAMPP (application software for SQL server), In the File Upload window that appears, navigate to and select the file cosmofarmer.sql in the php_dynamic folder you downloaded with the tutorial files.
6. Click the Go button.
The MySQL server slurps down the SQL file, and executes the instructions found within it. The results? Four new talbes are created (see the list of talbles that just appeared on the left side of the phpMyAdmin window) and a bunch of data is added to them. "
The book I am reading explains everything but how the cosmofarmer.sql file was made.

Creating Tables for COPA ( Non standard)

Similar Messages

Maybe you are looking for