Creation ESSUsers in background mode

Hi Experts!
I try to setup automatic creation ESSUsers (User ID is employee personal number) in HR system, transaction hruser in background mode, in manual mode everything is ok, but in background mode result isnu2019t so good.
Thanks in advance
Dmitriy

Hi
We too have tried this without much success....eventually we carry this out from the front end on a weekly basis as part of our production support activity.
We have tried to run the same in background with all authorization without success.......and eventually run the same from Frontend.
all the best

Similar Messages

BDC is not working in background mode and working fine in Foreground mode

Hi Experts,
I have created a BDC in SHDB for the transaction code:CWBQM for creating and deleting the record and converted the BDC recording into the program using call transaction. It is working fine in both foreground and background. When I given the same program for users testing one for the user was able to delete the records but Creation is not working in the same BDC. He is able to create the same records in another PC and the problem is only in that PC and only during the creation of the record. When I change the mode to 'A' mode for testing and request the user to execute and it is working fine the records created successfully. What could be the issue ?
Thanks,
Hema

Hello,
While recording BDC in SHDB try setting "Simulate background mode" flag and give a try.
Cheers,
Nag

Execute one thread in background mode.

hello ,
I have an application where the user can shows dialogs to displays, adds, modify and delete rows of one tale inside some JTextFields.
I have a problem to use this application, when one same dialog is showed more then one time....
Exactly: not problems come the first time the dialog is showed, but the second time, the time to wait because the performance is executed is very long..., and further, ....when the dialog at last was is shoved, no data of the table are in the JTextFields.
I get errors too when at last the dialog was shoved, and the errors not aways said the same reason..., but all the errors are referred to the impossibility (in the performances that followed the first) to have a suitable resultset containing the data.
Some error are "null pointer exception" to read the resultSet, other error is "Impossibils get a block in the required time" ...
I read documentation and I understand that the fault, probably, could came from the Event Dispach Thread that had the task to manage the creation of the ResultSet.
Now I am trying to solve (at this moment without success) the problem in this direction, ...as well I have not experience about to manage the use of SwingWorker class.
I should like hear what it is wrong in that I am doing...
Initially my code was this
     * Create a resultSet, for the current table
    private void createResultSet() {
            statement = dbconn.createStatement(ResultSet.TYPE_SCROLL_SENSITIVE, ResultSet.CONCUR_UPDATABLE);
            currentResultSet = statement.executeQuery("Select * from " + tableName);
            boolean validateState = currentResultSet.last();
            regsNmbrOnTheTable = currentResultSet.getRow();
            System.out.println("Numero attuale di records = " + regsNmbrOnTheTable);
            // here come the exception:
            // Exception in thread "AWT-EventQueue-0" java.lang.NullPointerException
        } catch (SQLException ex) {
            reportErrors.checkingSyntaxInInputTags("metodo createResultSet(): Errore nel creare il resultSet");
//            Logger.getLogger(Main.class.getName()).log(Level.SEVERE, null, ex);
    } // createResultSetrecently I modified it in order to put the creation of the ResultSet in background....
     * Create a resultSet, for the current table
    private void createResultSet() {
        (acquiresResultSetInBackground = new AcquiresResultSetInBackground()).execute();
        currentResultSet = acquiresResultSetInBackground.doInBackground();
    } // createResultSet
// inner class to manage the performance in background mode.
class AcquiresResultSetInBackground extends SwingWorker <ResultSet, Void> {
        ResultSet resultSet;
        @Override
        protected ResultSet doInBackground() {
        try {
            statement = dbconn.createStatement(ResultSet.TYPE_SCROLL_SENSITIVE, ResultSet.CONCUR_UPDATABLE);
              resultSet = statement.executeQuery("Select * from " + tableName);
        } catch (SQLException ex) {
            reportErrors.checkingSyntaxInInputTags("metodo createResultSet(): Errore nel creare il resultSet");
        return resultSet;
}How I said I get again the same behavior that was before......
thank you
Regards
tonyMrsangelo

For custom transactions you shouldn't have a problem - unless you're trying to do something that needs dialog with the presentation server.
Set an infinite loop in the custom transaction, launch your program in backround, then from Sm50, go to debug and find out what's going on.
DATA: debug.
WHILE debug IS INITIAL. " Debug from SM50 will get you here, change field DEBUG in the
ENDWHILE.               " debugger to contain 'X', and the loop will end.
Also, if your custom tx calls any standard SAP programs/FM, there is a chance that those programs work differently in background than foreground.

BTLE in Background Mode

Hello,
I’m developing a BTLE application with CoreBluetooth. If the iPhone is connected with the Bluetooth client, everything is fine, even if the application is running in the background the connection is kept alive. Is it possible to scan and connect to a Bluetooth client when the application is in the background? If the application does into background, the iPhone stops scanning, even if “bluetooth-central” is activated.
Kind regards,
_Stani

Hi Patel,
I will suggest you to use the BDC session method instead of using the Call Transaction. After creation of session in SM35 you can submit the session in background mode easily . We cannot submit the call transaction in background. You won't get any messages if you submit in background in session method.
Three steps to follow if you want to create the session.
1) BDC_OPEN
2) BDC_INSERT
3)BDC_CLOSE
Thanks,
Satheesh

XLS from Application server in background mode to internal table

Hi,
I need to transfer the content of an excel file in the application server to an internal table while running my program in background. My file is xls, cant use csv. For dataset bin mode, I need to know how to transfer the data to my internal table, already searched on forum but didnt find answer, at least not for background..
ow, I am using v6 here
about the ALSM_EXCEL_TO_INTERNAL_TABLE, I get the upload_ole error all the time, and with TEXT_CONVERT_XLS_TO_SAP, conversion_failed all the time too...
here is the code, just the load part and data declaration:
REPORT zbeto.
TYPE-POOLS: truxs.
TYPES:
BEGIN OF y_cot,
text1(12) TYPE c,
text2(12) TYPE c,
text3(12) TYPE c,
text4(12) TYPE c,
text5(12) TYPE c,
END OF y_cot.
DATA: it_datatab TYPE STANDARD TABLE OF y_cot,
wa_datatab TYPE y_cot,
it_raw TYPE truxs_t_text_data.
DATA:
v_file TYPE rlgrap-filename,
begin_col TYPE i VALUE '1',
begin_row TYPE i VALUE '2',
end_col TYPE i VALUE '5',
end_row TYPE i VALUE '102',
t_ctmp TYPE y_cot OCCURS 0 WITH HEADER LINE,
t_xls TYPE alsmex_tabline OCCURS 0 WITH HEADER LINE.
START-OF-SELECTION.
PERFORM f_load_xls.
FORM : f_load_xls
FORM f_load_xls.
v_file = '
ZSAPDEV\SAPDEVINTERF$\COTACAO\TESTE.XLS'.
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
EXPORTING
filename = v_file
i_begin_col = begin_col
i_begin_row = begin_row
i_end_col = end_col
i_end_row = end_row
TABLES
intern = t_xls
EXCEPTIONS
inconsistent_parameters = 1
upload_ole = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
EXPORTING
I_FIELD_SEPERATOR =
i_line_header = 'X'
i_tab_raw_data = it_raw " WORK TABLE
i_filename = v_file
TABLES
i_tab_converted_data = it_datatab[] "ACTUAL DATA
EXCEPTIONS
conversion_failed = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
t_ctmp[] = it_datatab[].
ENDFORM. "f_load_xls
both FM arent working, and when I try to execute in background mode, before anything, I recieve the following error:
Message text:
Error during import of clipboard contents
Message class:
ALSMEX
Message no.:
037
Message type:
A
and without the ASLM FM, the TEXT_CONVERT give me the conversion_failed exception...
the directories are right, that I am sure, because I just copy&paste it from CG3Z/CG3Y when I uploaded and downloaded to
check the file in the server...
am I missing something?
thanks again,
Roberto Macedo
(PS: I made another topic because none replied the other in 4 days and wasnt solved yet)

Hi!
You didn't find answer for this, because it is not possible. If you run your program in background, it is running on the server, and does not have any connection to your local machine. That's why you can't upload/download in background mode.
You might try to address somehow your local PC, with its IP or MAC address, but I don't think does this task worth so much time.
Run your program in online mode, or if you want to run it in background, then upload your file into the SAP server.
Regards
Tamá

BDC Program is not working in background mode

Hi All,
I hv one bdc program for tcode fb02 which is working fine in foreground mode and data is updated to each screen properly. While running the same program in Background mode data is not updated. Can u seggust the solution.
Regards,
Rahul S

Hi ,
Remove the break point in the BDC performs.
put the break point once u complete the BDC.... otherwise execute the BDC in MODE 'E'.. error mode.
regards,
Rama Reddy
Edited by: ram reddy on Nov 16, 2009 5:37 AM

Submit + LIST_FROM_MEMORY in background mode

Hi,
I need to capture the output results from standard program RFKORK00 and hence I designed a wrapper program that calls the standard program.
RFKORK00 generates a report output and I am able to capture the results correctly using the FM LIST_FROM_MEMORY and FM LIST_FROM_ASCI in foreground mode. But when I try to run the same job in background, the FM LIST_FROM_MEMORY does not return any results (I have checked the log by inserting information messages at various points in the program).
I have searched for similar contexts here on SDN and everyone is in agreement that LIST_FROM_MEMORY would work well even in the background mode too but I am unable to find the fault in this case. Could you please help, attached is the code -
SUBMIT RFKORK00
      USING SELECTION-SET c_variant
      EXPORTING LIST TO MEMORY
      AND RETURN.
    CALL FUNCTION 'LIST_FROM_MEMORY'
      TABLES
        listobject = lt_abaplist
      EXCEPTIONS
        not_found = 1
        OTHERS     = 2.
    IF sy-subrc = 0.
      CALL FUNCTION 'LIST_TO_ASCI'
        EXPORTING
          list_index         = '-1'
          with_line_break    = ' '
        TABLES
          listasci           = lt_vlist[]
          listobject         = lt_abaplist[]
        EXCEPTIONS
          empty_list         = 1
          list_index_invalid = 2
          OTHERS             = 3.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
      MESSAGE i099(z1) WITH 'LIST TO ASCI CALL'.
   ENDIF.

Well, RFKORK00 is indeed a print program that triggers spool in the background.
I gave up playing around memory id, instead I am using the following code to check whether a spool was created in table TSP03.
CLEAR r_rqcretime[].
    r_rqcretime-sign    = 'I'.
    r_rqcretime-option = 'BT'.
    CALL FUNCTION 'IB_CONVERT_INTO_TIMESTAMP'
      EXPORTING
        i_datlo     = sy-datlo
        i_timlo     = sy-uzeit
        i_tzone     = 'EST'
      IMPORTING
        e_timestamp = v_tzntstmps.
    r_rqcretime-low = v_tzntstmps.
**Submit job with changed variant
    SUBMIT (p_prog)
      USING SELECTION-SET c_variant
      EXPORTING LIST TO MEMORY
      AND RETURN.
    WAIT UP TO 5 SECONDS.
**Fetch the spool number generated by the program
    CALL FUNCTION 'IB_CONVERT_INTO_TIMESTAMP'
      EXPORTING
        i_datlo     = sy-datlo
        i_timlo     = sy-uzeit
        i_tzone     = 'EST'
      IMPORTING
        e_timestamp = v_tzntstmps.
    r_rqcretime-high = v_tzntstmps.
    CONDENSE: r_rqcretime-low,r_rqcretime-high.
    CONCATENATE r_rqcretime-low   '00' INTO r_rqcretime-low.
    CONCATENATE r_rqcretime-high '00' INTO r_rqcretime-high.
    APPEND r_rqcretime.
    SELECT SINGLE rqident FROM tsp01
                  INTO v_rqident
                 WHERE rqowner = sy-uname
                   AND rqcretime IN r_rqcretime.

Can we schedule BDC in Background Mode - SM37

Hi Guru,
Can we schedule our BDC in background - SM37 . Upload file will be on Local Sustem - C drive.
Regards
Durgesh
Moderator message: background/GUI problems = FAQ, please search before posting.
locked by: Thomas Zloch on Oct 6, 2010 2:14 PM

GUI functions (like GUI_UPLOAD) will not work in background, they need an actual Gui active.
There are plenty of threads on this subject, search also in the wiki for threads/guide like [Working with files |http://wiki.sdn.sap.com/wiki/display/ABAP/Workingwithfiles] or [Communication to Presentation Server in Background Mode|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/9831750a-0801-0010-1d9e-f8c64efb2bd2&overridelayout=true] or [Working with FTP Server |http://wiki.sdn.sap.com/wiki/display/ABAP/WorkingwithFTP+Server]
(To execute a BDC in background use report RSBDCSUB.)
Regards,
Raymond

Calling a function from a DLL, exectution in background mode.

Dear Experts,
We have created an ABAP report the calls a function from a DLL file. If the report is executed in on-line mode the program calls and executes the function from the DLL, but if the ABAP programa is executed in background mode it doesnt calls the DLL function.
Do you know a way to solve the problem when executing in background mode?
Best regards.
Antonio

Hi Gabriel,
Let me explain in details about my DLL function.
We are importing the business partners from legacy system into the SAP CRM system, so at the moment we created the BP master data via BAPI, I get the name of the BP and this moment I call the function in the DLL file. I export the parameter name and I receive back a simplified string with the name reduced to a code. This code I get back from the dll it is insert in a Z table, so there is no interaction in the screen, all must be executed in background mode, because there are a lot of business partners to be converted in SAP system.
I am sending my code for your considerations.
Instancia a DLL
CREATE OBJECT dll 'MTCODE.CPFONET'.
IF sy-subrc NE 0.
    RAISE without_dll.
ENDIF.
Move para a tabela interna IT_NAME os valores recebidos na TI_NAME
it_name[] = ti_name[].
Para cada registro importado
LOOP AT it_name.
    CLEAR v_string_ret.
    wa_matchcode-zregid     = it_name-zregid.
    wa_matchcode-name1_text = it_name-name1_text.
    v_string = it_name-name1_text.
    CONDENSE v_string.
    TRANSLATE v_string TO UPPER CASE.
    CALL METHOD OF dll 'SetNome' EXPORTING #1 = v_string.
    CALL METHOD OF dll 'ExecMatch'.
    CALL METHOD OF DLL 'GetMCData' = v_string_ret.
    FREE OBJECT dll.
Preenche os campos do match-code de acordo com o retorno da DLL
    SPLIT v_string_ret
    AT '|'
    INTO wa_matchcode-zparmcln
         wa_matchcode-zparmcfn
         v_empty
         wa_matchcode-name_first
         wa_matchcode-name_last
         wa_matchcode-namemiddle.
Adiciona o registro com o match-code correspondente na TE_MATCHCODE
    APPEND wa_matchcode TO te_matchcode.
ENDLOOP.

Running a Dynpro-based Report as a Job/in Background mode

Hello,
i've got a report which hasn't got a selection-screen as its startscreen, but a complex dynpro and is based on different start-buttons and not only the "basic" F8/Run-Button. the users still would like to be able to run the report in background mode and as an automated weekly job. moreover they want to use their own configuration/variant for date-fields etc., just like they are used from a selection-screen. is this possible "out of the box" with a dynpro-based report or how can i archive this through my own programming logic?
thanks for your help,
dsp

Hi,
I guess yes, but since you seem to have several processes possible at startup (those buttons), you will have to code a new bit of code at the start of your application. This to choose the correct process... you should have a new statement like
IF sy-batch IS NOT INITIAL.
"Perform batch process
ELSE.
"Perform normal run
ENDIF.
For the variant, I'm not sure to really get the idea... Do the users already use variants with the actual version? or is there no selection screen at all? If not, you should use one and set-up parameters to pre-fill your dynpro fields...
Kr,
Manu

Create Quality Management view for a Material in background mode

I want to know if there is a way to create a Quality Management View (Quality Management tab) on Material Master (material already extended to plant ) in background mode.
The requirement is to add inspection setup data for a material extended to a particular plant in background. I tried using 'BAPI_MATINSPCTRL_SAVEREPLICA' to add the data and it works perfect as required. Now the problem is this BAPI is creating the inspection setup data only for the material which has QM tab in MM02 for e.g. I manually created the inspection setup for a Material from MM01 and then deleted it , now the BAPI works fine for this material because when I created an inspection setup from MM01 it created the QM tab and after i deleted the entry the tab was still there with no entry in inspection setup.
I want to create inspection setup for a material which does not have QM tab.
I have to create everything is background mode. BDC is one option which I am list interested in.
Thank you for helping in advance.

Thank you for looking into my issue. I have to do the inspection setup in background without using any front end transaction.

Error in batch session processing in background mode

Hi ,
I am trying to do data transfer using batch session for transaction FD32.
Here the batch session is executing when I am processing the session in foreground.
Whereas in background mode it is failing.
Please check and assit.
Regards
Kishore

Hi Kishore,
Probably it will be some information or warning message which is coming in the background execution of the session.
That is the reason your session is going into error. Run the errored out session once again in foreground mode. You will get to know the reason of failure.
Please let us know of any doubts.
Cheers
VJ

Call transaction KB21N processed by a program in background mode

Hi to all,
I call transaction KB21N using BDCDATA in a custom program. If I process this program in foreground mode all it's OK, but if I process the program in background mode, I have a runtime error with DUMP: RAISE EXCEPTION with exception condition CNTL_ERROR. This program has to be executed in background so a bapi exist to use instead of call transaction or something else?
Thank you very much,
regards
Antonio

HI Antonio,
The transaction you are dealing with is an SAP Enjoy transaction and for such transactions it is not recommended to do a BDC. YOu should search for a BAPI for the same as you have already identified. Basically the enjoy transactions uses GUI controls which cannot be handled by BDC.
BAPI_ACC_ACTIVITY_ALLOC_POST may serve your purpose.
Regards,
ravi
Message was edited by:
Ravi Kanth Talagana

SM35 Re-processing of Incorrect/Error session in Background Mode

Hi all,
I am trying to reprocess a session in SM35 which is in Error status. Here I am a facing an issue, if I reprocess this session in background mode then it says that Batch input data is not available for a screen which is already processed. Ideally it should start from the screen where it threw error in the first run. If I select mode as Foreground or Display error then session is getting processed correctly.
Note:
If the session is in Ready to Process state then processing in background works perfectly fine. Has anyone came across this problem ?
Has anyone tried reprocessing Incorrect Session in background mode ??????
Regrads,
Antony

Thanks Sandra,
Indeed I understood the problem. And the problem is that transaction KEBC is always executed correctly & since its processed correctly its removed from the BDC Queue
Here transaction KEBC, sets a Memory Parameter, and transaction KEU2, first checks whether the memory parameter is initial, if found intial it pops-up a screen and makes the user enter it. In my case KEBC always run successfully
As you rightly suggested when session is in error, transaction KEBC is not getting called again to set the memory parameter & its throwing the pop-up from the transaction KEU2 to be entered by the user. ( BDCDATA currently dosent handle this Pop-up).
I could have omitted the KEBC transaction, but handling this pop-up from transaction KEU2 becomes tricky since it will only pop-up if the memory parameter is initial. And unfortunately Pop-up is the first screen in the sequence for transaction for KEU2 & nothing can be done in coding level to call KEU2 with the pop-up in all scenarios(Even when Memmory varaible is set) !
So I am kind of in a dilema, how to handle this? What I am suggesting to the Functional consultant is that let the session be only run in background mode (as it will be always in a new internal session memory variable will always be inital ) & I will record this pop-up in my BDC omitting transaction KEBC.
Do you have anyother solution for this?
Or is there any option to re process even the successfull transacations ?

Execution of Report with Tabstrips in Background Mode

Hi everyone,
              I have used 2 tabstrips in my report. When I choose the second tabstrip, give the related I/P's and then execute in Background mode. The O/P generated is coming for the 1st tabstrip instead of what I'd selected.
How could I execute the report in Background Mode for my Second Tabstrip? Any changes to be done in my Coding?
Please throw some light into this !!!!
Regards,
Ramakrishnan.G

Hi
You may have attached user command to your tabs in definition -
<b>DATA : TAB1, TAB2.
SELECTION-SCREEN BEGIN OF TABBED BLOCK TB FOR 2 LINES.
SELECTION-SCREEN TAB (15) TABNAME1 USER-COMMAND TAB1 DEFAULT SCREEN 101.
SELECTION-SCREEN TAB (15) TABNAME2 USER-COMMAND TAB3 DEFAULT SCREEN
102.
...</b>
Now in
<b>
INITIALIZATION.
TABNAME1 = 'TAB1'.
TABNAME2 = 'TAB2'.
AT SLECTION-SCREEN.
IF TB-ACTIVETAB = 'TAB1'.
    TAB1 = 'X'.
    TAB2 = ' '.
ELSE.
    TAB1 = ' '.
    TAB2 = 'X'.
ENDIF.
START-OF-SELECTION.
IF TAB1 = 'X'.
PERFORM ROUTINE_FOR_TAB1.
ELSE.
   PERFORM ROUTINE_FOR_TAB2.
ENDIF.</b>
Cheers.
( Dont forget to reward if answers helped )

Creation ESSUsers in background mode

Similar Messages

Maybe you are looking for