Creation of a Table control with the wizard

Hi all,
I'd like to add a table control to my dynpro with the wizard.
I want to use an internal table and a work area from my program but I get the following error :
"The table work area WA_FID does not exist or is not a structure".
here is my data definition:
types: begin of fid_line,
  dokar type draw-dokar,
  doknr type draw-doknr,
  doktl type draw-doktl,
  dokvr type draw-dokvr,
  dktxt type drat-dktxt,
  dokst type draw-dokst,
end of fid_line.
data : it_fid type table of fid_line,
        wa_fid type fid_line.
I also tried using field symbol as work area.
I thought it was possible to create a table control from a user internal table.
Did someone see the problem ?
Thanks
Sylvain V.

Hi,
Check the below link.
In this, I am not using wizard,but manually creating table control and I am not using user defined types.I don't think it is possible to use user-defined internal table in wizard.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/abap/abap code samples/table control in abap.pdf

Similar Messages

  • Table control with wizard in module pool

    Hi Gurus!!
    First I have an ztable for header and ztable for item of the purchase order. We have the requirement of first uploading the data into ztable and then perform bapi or bdc on it. So, before the data goes into the ztable we have to create screens to show the data,and if any error it should be corrected and then send it to the ztable.
    So,in the screen I created a table control using the wizard where I gave the internal table and work area I declared for the item ztable.
    Now, I need to give a condition to the table control such that only the details of a single vendor should be displayed in the table control but not all.
    Note: The vendor field in the item ztable is the value key and its check table is the header ztable.
    I am not able to give a condition in the PAI of the screen where the loop gets created for the table control.
    Could someone please help me with this issue.
    Thanks and Regards,
    Vishwa.

    Instead of putting a condition to the table control level u can do 1 thing ..create another internal table for ztable (lineitem). And based on ur condition populate this table from the main table and then display this table to the table control.
    Regards,
    Joy.

  • BDC: How to enter data in Table control (With wizard) using scrolling?

    Using BDC, I am trying to enter the data in the table control (with wizard).
    I want to know what is the specific command to scroll down in table control (With Wizard).
    While recording I am getting these steps:
    SAPLCKBASCR1     0202     X
                   BDC_CURSOR     CKI94B-MATNR
                   BDC_OKCODE     /00
    When I use above command and run BDC, it does not scroll.
    Kindly let me know where am I going wrong.
    Thanks in advance for your kind help.
    Ashish

    The transaction is CK94
    and the BDC recording is :
              T     CK94
    SAPLCKBASCR1     0200     X
                   BDC_CURSOR     CKI94A-BDATJ
                   BDC_OKCODE     =ENTR
                   CKI94A-MATNR     10000789
                   CKI94A-WERKS     VA79
                   CKI94A-BDATJ     2005
                   CKI94A-MGTYP     ZDU01
    SAPLCKBASCR1     0202     X
                   BDC_CURSOR     CKI94B-MISCH_VERH(02)
                   BDC_OKCODE     /00
                   CKI94B-MIXCOST_PC(01)
                   CKI94B-MIXCOST_PC(02)     X
                   CKI94B-MISCH_VERH(01)
                   CKI94B-MISCH_VERH(02)                    40
    SAPLCKBASCR1     0202     X
                   BDC_CURSOR     CKI94B-MATNR
                   BDC_OKCODE     /00
    SAPLCKBASCR1     0202     X
                   BDC_CURSOR     CKI94B-MATNR
                   BDC_OKCODE     /00
    SAPLCKBASCR1     0202     X
                   BDC_CURSOR     CKI94B-MISCH_VERH(07)
                   BDC_OKCODE     /00
                   CKI94B-MIXCOST_PC(07)
                   CKI94B-MISCH_VERH(07)                    60
    SAPLCKBASCR1     0202     X
                   BDC_CURSOR     CKI94B-MATNR
                   BDC_OKCODE     /00
    SAPLCKBASCR1     0202     X
                   BDC_CURSOR     CKI94B-MATNR
                   BDC_OKCODE     /00
    SAPLCKBASCR1     0202     X
                   BDC_CURSOR     CKI94B-MATNR
                   BDC_OKCODE     =STOR
    BDC_OKCODE  '/00' is recorded when I scroll down in the table control.
    Thanks for your kind  concern.
    Ashish

  • How to delete the row in table control with respect to one field in module pool programming?

    Hi,
    Can I know the way to delete the row in table control with respect to one field in module pool programming
    Regards
    Darshan MS

    HI,
    I want to delete the row after the display of table control. I have created push button as delete row. If I click on this push button, the selected row should get deleted.
    I have written this code,
    module USER_COMMAND_9000 input.
    DATA OK_CODE TYPE SY-UCOMM.
    OK_CODE = SY-UCOMM.
    CASE OK_CODE.
         WHEN 'DELETE'.
            LOOP AT lt_source INTO ls_source WHERE mark = 'X'.
                APPEND LS_SOURCE TO LT_RESTORE.
                DELETE TABLE LT_SOURCE FROM LS_SOURCE.
                SOURCE-LINES = SOURCE-LINES - 1.
            ENDLOOP.
    But I'm unable to delete the selected rows, It is getting deleted the last rows eventhough I select the other row.
    So I thought of doing with respect to the field.

  • HTTP 404 File not Found running a page created with the wizard

    Hi all,
    I created a page "tabular form" with the wizard to delete and update records in a table.
    All pages of the application are ok. Only this page, when refresh after click on the "delete" or "submit" button send the message "HTTP 404 - File not found".
    OS - Windows XP
    DB - 10.1.0.4
    HTMLDB 2.0
    any idea?
    thanks in advance.

    Hi Scott,
    this is the error.log
    [Fri Oct 06 11:39:41 2006] [error] [client 10.20.101.243] [ecid: 1160127581:10.20.101.243:3860:2904:21,0] mod_plsql: /pls/htmldb/wwv_flow.accept HTTP-404
    wwv_flow.accept: SIGNATURE (parameter names) MISMATCH
    VARIABLES IN FORM NOT IN PROCEDURE: F51,F52,F53,F54,F55,F56,F57,F58,F59
    NON-DEFAULT VARIABLES IN PROCEDURE NOT IN FORM:
    This is my first application with htmldb and i don't understand where is the error because i don't added parameter after the wizard creation. I just created the page and run. If this page start the first time when is called from another page, why after refresh fail?
    thanks, Fabio

  • Vertical scroll bar in table control with wizrads

    Hi,
      Im working on a table control with a customised table. I created a table control with wizards. But vertical scroll bar is not working. How can i invoke vertical scroll bar and can any one provide the code for the all the operations on a table control like save,find,find next,change....Thanks in advance.
    Avinash

    Hi Avinash
    move the records number of your internal table into field LINES of tablecontrol. So you should change the code generated by wizard in PBO, for example create a new module:
    PROCESS PBO
    MODULE SET_DATA_TO_T_CTRL.
    LOOP..
    ENDLOOP.
    MODULE SET_DATA_TO_T_CTRL.
       DESCRIBE TABLE ITAB LINE SY-TABIX.
       <TABLECONTROL>-LINES = SY-TABIX.
    ENDMODULE.
    Max

  • About table control in the selection screen

    i want to create a table control in the selection screen of my report.i can create the table control using SE51.but how to program with the table control in the report.for example i should fetch the data for the personnel nos entered in the table control of the selection screen.how to do this.can any of u provide sample code for this.
    thanks.

    Hi vadivel,
    Create internal table and create table control using same internal table
    e.g.
    data : begin of it,
           end of it.
    start-of-selection.
    call screen 100.
    If you create table control using wizard then code automatically come here.
    Now, Put one push button in same screen where table control is available. let's say push button Display report.
    Now, use export <IT> to memory id <ID> and submit report <report name> and return. now, define same internal table in this submitted report and use import <IT> from memory id <ID>. Now, table control data is available in internal table, use that data and make code as per your requirement. If you dont want to use push button then use menu bar and at user-command event.
    Hope this help
    Regards,
    Parag

  • Custom Infotype - Using Table control in the screen.  IN OM

    Hi,
    I am having a requriement where in I need to create a custom infotype using table control in the screen. I have to create this in OM and I am using PPCI transaction to create the info type. I am able to create the infotype with fields but not table control. Please let me know if any one of you came across and help me with the process I need to follow.
    Thanks in advance.
    Venkat.

    Hello,
    After you create the info type throug PPCi, you can directly go to the Sceen module program created automatically while creating Info type and edit the screen.
    activate it after your changes.
    Regards,
    Srujan.

  • How to add a field in a table control of the subscreen 6103 of tcode f-03

    hi abap gurus....i m new to abap and this is my first post ..i m hoping for a reply soon as it is urgent....
    my requirement is to add a field PAYR-CHECF to a table control of the subscreen 6103 of tcode f-03

    Hi,
    Please see documentation of enhancement MM06E005 (transaction SMOD).          
    Userexit EXIT_SAPMM06E_016 is a component of enhancement MM06E005.            
    With that enhancement, you can                                                
      -   Maintain/supply your own customer fields                                
      -   Update your own customer-specific tables                                
    You cannot:                                                                   
      -   Change standard fields                                                  
      -   Change data that depends on the document header in the items            
      -   Change data that depends on an item in the document header                                                                               
    Please have a look at Business Add-In (BAdI) ME_PROCESS_PO_CUST.              
    Regards,
    Edit

  • How to Populate a Dropdown field for a table control with different keys

    Hi All,
    I have Table control with abt eight columns (fields). Out of these eight field one field is with dropdown list. In table control Project ID is Primary key column. Depending upon this Project ID value, i have different values which is to be populated in dropdown boxes. In table control if there is only one project ID value say 'P000715' i can populate it but when i have more than one project ID (P000715, p000716, P000717.....) in display in rows of table control i want to have different values in my dropdown field corresponding to that row of project id. Experts please tell me how to achieve this functionality.
    Thankx in Advance
    Rizwan Ahmad Siddiqui

    The only way you may be able to do this is using
    MODULE PROCESS ON VALUE-REQUEST. User-programmer F4 help
    in your PAI routine.
    In this routine you would build the list and get the returned value to update the field.
    Something like this.
      DATA: BEGIN OF value_tab OCCURS 0,
        field1 TYPE zlmltype,
        field2 TYPE zltypex,
      END OF value_tab.
    * Drop down values
      REFRESH it_return_tab. CLEAR it_return_tab.
      REFRESH value_tab. CLEAR value_tab.
      SELECT ltype ltypex
        INTO TABLE value_tab
        FROM zlmltyp
        WHERE auth NE '9'.    "System Only
      CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
           EXPORTING
                retfield   = 'FIELD1'
                value_org  = 'S'
           TABLES
                value_tab  = value_tab[]
                return_tab = it_return_tab.
      READ TABLE it_return_tab INDEX 1 INTO wa_return_tab.
      CHECK sy-subrc EQ 0.
      p_pleadtyp = wa_return_tab-fieldval.

  • Table Control with default values for a Column

    Hi,
      I have a table Control with  fields  kschl    kbetr    konwa    mark     
    i have created a range for KSCHL
    now i need to pass this to the table column
    Kindly suggest how can i handle this?
    BEGIN OF y_condition,
      kschl       TYPE kscha,
      kbetr       TYPE kbetr_kond,
      konwa       TYPE konwa,
      mark        TYPE char1,
    END OF y_condition,
    t_cost TYPE STANDARD TABLE OF y_condition,
    MODULE mo_tc_cost_init OUTPUT.
      IF  w_tc_cost_c IS INITIAL.
        REFRESH CONTROL c_tc_cost FROM SCREEN c_scr2000.
        REFRESH t_cost.
        MOVE c_select TO w_tc_cost_c.
        FREE r_kschl.
        MOVE: c_i    TO r_kschl-sign,
              c_eq   TO r_kschl-option,
              c_zhb1 TO r_kschl-low.
        APPEND r_kschl.
        MOVE: c_i    TO r_kschl-sign,
              c_eq   TO r_kschl-option,
              c_zhb2 TO r_kschl-low.
        APPEND r_kschl.
        MOVE: c_i    TO r_kschl-sign,
              c_eq   TO r_kschl-option,
              c_zhb3 TO r_kschl-low.
        APPEND r_kschl.
      ENDIF.

    Can you clarify please?... you say have a table control containing the following columns:
    kschl TYPE kscha,
    kbetr TYPE kbetr_kond,
    konwa TYPE konwa,
    mark TYPE char1
    so where do you expect the range table "r_kschl" to appear? ... did you want a second table control on the screen?
    Jonathan

  • Pressing on the Table Control locks the front panel in a certain state

    Hello everyone!
    I have following problem. I have a very simple state machine with two cases. In the Idle case there is an event structure receiving input from a Table Control. When pressing Run the Vi enters the Run state. To exit the RUn state I have a Finish button, but IF I during the running state press anything on the Table Control the entire front panel will lock. Disabling the Table Control in the running state doesn´t help in the same way it helped for Button 1 and 2. Any help would be appreciated. I have tried unsuccesfully with the Registering and Unregistering event functions.
    Attached is a simplified version of the problem. Thanks in advance.
    Solved!
    Go to Solution.
    Attachments:
    Event lock problem.vi ‏22 KB

    Hi, RealBjörkis !
    I ran your VI and I saw a few problems, try to keep your controls outside the events structure, also do what said P@Anand previously.
    Here is your VI with some corrections. (Hope it fix the problem)
    Good Luck.
    Attachments:
    Event lock problem.vi ‏23 KB

  • The timesheet creation failed, because of problems with the project I server or with data validation

    Hi,
    One of my user is facing issue in creating new time sheet,
    "The time sheet creation failed, because of problems with the project server or with data validations".
    This issue is coming to only few members out of 10000 members.
    Note: For the same user, can able to do in other machines. only the problem in his machine. Have ran the office diagnostics, but still the problem persists.
    Is any add-on's/any settings need to update in IE. Could any one please help me on how to fix this issue?
    Many thanks in advance.

    I would check the compatibility settings in IE etc, or try another browser (chrome, safari etc.)
    Ben Howard [MVP] | web |
    blog | book

  • How can i distinguish two controls with the same name?

    I'm recording automated tests with VS 2012 Coded Ui Test for testing a web application.
    In that web application it is possible to enter data in something looking like a list.
    There is - per example - an Edit control sitting on a ColumnHeader with the name/text "Description".
    Below that header is another Edit control for data input - containing the text "Description" too and which lies on a Cell control.
    When i playback my recording, Coded UI Test looks for a control with the name "Description" and gets the one, it finds at first.
    In that case the Edit on the ColumnHeader, which causes an exception, when the Text will be setted with the data input from the recording.
    Unfortunately the controls have no ID.
    Is there a way to distinguish controls with the same name?
    Thanks in advance!

    Hi Patrick Pirzer,
    >>Is there a way to distinguish controls with the same name?
    Based on the blog "How does “Coded UI test” finds a control ??", we know that to really find a control, it would be related to the unique properties as the search properties,
    so if two controls have the same property, please use other unique property as the search property would be better.
    Best Regards,
    Jack
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Hiding Table Columns with the Spry Element Selector

    I am trying to set up a toggle button that will show/hide
    rows >1 when clicked. I've used Adobe's
    "Hiding
    Table Columns with the Spry Element Selector" example and it
    worked fine with an HTML list, until I linked to actual XML data.
    Now it works in reverse. What gives?
    Here's the example:
    http://a44.awardspace.com/testing/toggleShowHideRows.htm

    That's what I started with. Same result:
    http://a44.awardspace.com/testing/toggleShowHideRows.htm

Maybe you are looking for