How to add some days to the current system date

can anyone help how to add some days to the current date i.e if today is 3-12-2007 and if v add 15 more days then the output should be 18-12-2007

RajeshChandan wrote:
First of all thanks a lot ,and coming to the question i dont mean to change the sysdate instead i want to write a prg. where after entering the current date it should effect with the no.of days that i have given but not the system date .if u can answer please reply for thisAh, I see. In that case, you can use an instance of GregorianCalendar and use it's add(...) method to add days, months, years etc. to it.
http://java.sun.com/javase/6/docs/api/java/util/GregorianCalendar.html
Good luck.

Similar Messages

  • How to Add 15 Days to the current Date in eCATT

    Hello eCATT Guru's,
    How to add 15 days to the current date in eCATT.
    I have changed the Date format to mm/dd/yyyy.
    now i want to add 15 days to the sy-datum.
    How to do that.do any one know?
    Thanks in Advance,
    Raj

    Check out this link -
    http://help.sap.com/saphelp_46c/helpdata/en/d7/e21a50408e11d1896b0000e8322d00/frameset.htm
    It gives details about DATE variables in CATT. Hope this will help you out.
    ashish
    Reward points if you find this helpful.
    Message was edited by: Ashish Gundawar

  • How to add 15 days to the current date

    Hi everyone,
    I have the following doubt.
    I stored the current system date in to a variable.Now I want to store the date which is 15 days after the current date in to a new variable.
    ie current date:1-aug-09
    later date:1-aug-09 + 15 days ie 16-aug-09.
    Plz help me in solving this problem.
    Thanks & Regards,
    srinivas

    jaligamasrinivas wrote:
    I used String variable to store the current Date.
    Now in new string variable i want to store the date after 15 days from current dateSee reply #2. String is not the right type, to be doing date arithmetic, just like it wouldn't be the right type to do numeric arithmetic. You wouldn't store integer values as strings and ask how to add them up, would you?

  • Add one day to the current date

    Hi all,
    A stupid question...
    How can I add one day to the current date in a select. I want something similar to add one month to current date, but with days:
    something like:
    select TO_CHAR (ADD_MONTHS (SYSDATE, -1), 'DD-MM-YYYY')
    from dual
    Thanks

    select sysdate+1 "add one day" from dual;

  • Creating a field or workflow that responds to the Current System Date.

    In our activities/tasks we have a field that is the Expected Completion Date or Required Completion Date. Based on that date, and the current date, I want a workflow to trigger when the required completion date is less than 30 days away, sending daily reminders to the owner/manager that they have a activity/task due.
    The way I see it I have two options.
    1. Customize a field to be the system date. Create a workflow that says every time that field changes, and the date is within 30 days of required completion date, send out an email.
    2. Create a workflow that somehow incorporates the current/system date, and do the same thing as above, substituting the field with the actual date.
    I don't know how to make either of those options happen. Does anyone either have other options or advice on how to make this work?
    Thank you in advance!

    Hello Cyril,
    Here is an idea that could be done:
    You could create a dynamic step by having a step that holds all the properties for both configurations (the superset of the necessary variables) and an extra one that indicates which 'mode' the step is in.  Then you create the main Edit substep in whichever language you desire.  That substep window will then have a box/dropdown/etc. at the top you can use to choose between modes A & B.  When the user changes the value, you would dynamically change the rest of the window to contain the appropriate properties for mode A or B.  You then copy the property values in that window to the Step properties, and copy the mode to your variable and you can run the step in that mode.  When the step then runs, it checks the mode variable, and depending on its value, it will run the step in mode A or B.
    Now we could add a dialog that allows us to choose when we put a step down but we should still allow the user to change later via the Edit substep we create.
    I don't think we can create something that inserts a completely different step, but we can have one step that has the ability to do both and we can pick which one we execute.  Also note we still don't have the ability to edit the Panels for a step, so we have to use a new window that we call from our Edit substep to complete the step.
    Hope this helps.
    Regards,
    Olivier L. | Certified LabVIEW Developer

  • I need to get the Current System Date and time in the format

    I need to get the Current System Date and time in the format
    *6/24/2009 11:30:29 AM*
    How do i do it ?

    I seem to be saying this a lot lately.
    Google is your friend.
    I googled "java current date format" and SimpleDateFormat featured prominently in the results.

  • How can add some text on the image

    I have images in the gif format.
    How can I add some text in specified point on the image?
    Fpor example, by using Intermedia plugins?

    We do not support this functionality. I suspect you are talking about watermarking?
    I would suggest you send a message to [email protected] , the product manager for interMedia and describe your application. This would be helpful in defining future requirements. He may also know of partners that can supply this technology.
    You can add text to an image using JAI or some other packages before the image goes into the database, or when it goes out.
    Larry

  • JTabbedPane how to add some logo in the Tabs area?

    Hello,
    I was wondering if there is any way of adding some logo or any icon at the right side of the tabs area without that the JTabbedPane has all it's horizontal size full of tabs..
    | TAB1_| | __TAB2__| TAB3_| |__TAB4____| __________________LOGO_____
    |..................................................................................................................................|
    |..................................................................................................................................|
    |..................................................................................................................................|
    |..................................................................................................................................|
    |_________________________________________________________________|

    If you put the tabbed pane on a panel, the panel will show through the right side. So if you put some graphics on the panel, it would show.import java.awt.*;
    import javax.swing.*;
    public class Test extends JFrame {
      public Test() {
        setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        Container content = getContentPane();
        content.add(new JLabel("Top"), BorderLayout.NORTH);
        content.add(new JLabel("Bottom"), BorderLayout.SOUTH);
        JPanel mainPanel = new JPanel(new BorderLayout());
        mainPanel.setBackground(Color.pink);
        JTabbedPane jtp = new JTabbedPane();
        mainPanel.add(jtp, BorderLayout.CENTER);
        content.add(mainPanel, BorderLayout.CENTER);
        jtp.add("One",new JPanel());
        jtp.add("Two",new JPanel());
        jtp.add("Three",new JPanel());
        setSize(300, 275);
        setVisible(true);
      public static void main(String args[]) { new Test(); }
    }

  • XSLT Mapping: how to add one day to TimeStamp

    Hello Experts,
    My requirement is to add one day to current timestamp. Used $TimeSent to get the currenttimestamp. In Expired field, the need to add one day
    say Created= 2011-03-30T20:29:13Z
           Expired = 2011-03-31T20:29:13Z
         <xsl:param name="TimeSent"/>
         <created><xsl:value-of select="$TimeSent"/></created>
         <expired>2011-03-31T20:29:13Z</expired>
    How to add one day to the current timestamp. I am new to XSLT mapping and need some help with the code.
    Thanks
    Shikha Jain
    Edited by: Jain Shikha on Mar 30, 2011 8:34 PM
    Edited by: Jain Shikha on Mar 30, 2011 8:36 PM

    Hello All,
    Thanks for your reply. i tried the function and the code is working when i am testing in stylus studio. But the same code gives error when i  tested the xslt mapping in PI (Error: TransformerConfigurationException triggered while loading XSLT mapping).
    $TimeSent function is working when code is tested in PI , but it doesnot give value in stylus studio. Also Current-dateTime() function is doesnot give value in PI but works in stylus studio. Is there any difference in the functions used in stylus studio and XSLT mapping in PI?
    Also if i remove the code used for function(to add one day to timestamp), and use constant value(2011-04-02T23:24:56.763Z)the code is working fine in PI. Please help me to find out where the code is going wrong when tested in PI.
    Below is the XSLT code i am using
    <?xml version="1.0" encoding="UTF-8"?>
    <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:ds="http://xsltsl.org/date-time" xmlns:functx="http://www.functx.com" xmlns:xs="http://www.w3.org/2001/XMLSchema">
       <xsl:function name="functx:next-day" as="xs:date?">
          <xsl:param name="TimeSent" as="xs:anyAtomicType?"/>
          <xsl:sequence select="xs:date(current-date()) + xs:dayTimeDuration(&apos;P1D&apos;) "/>
       </xsl:function> 
    <xsl:template match="/">
          <xsl:param name="TimeSent"/>
          <soapenv:Envelope xmlns:olsa="http://www.skillsoft.com/services/olsa_v1_0/" xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
             <soapenv:Header>
                <wsse:Security soapenv:mustUnderstand="1" xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">
                   <wsu:Timestamp wsu:Id="Timestamp-191900" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
            <wsu:Created>
                         <xsl:value-of select="$TimeSent"/>
               </wsu:Created>
    <wsu:Expires>
         <xsl:value-of select="concat(substring(functx:next-day($TimeSent) ,1,10) ,&apos;T&apos;, current-time())"/>                  </wsu:Expires>
                   </wsu:Timestamp>
                   <wsse:UsernameToken wsu:Id="UsernameToken-19030197" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
                      <wsse:Username>ABC</wsse:Username>
                      <wsse:Password Type="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordDigest">XYZ</wsse:Password>
                      <wsse:Nonce>erDTBNoUWv7GdHDaErrLwA==</wsse:Nonce>
                      <wsu:Created>2011-02-15T23:24:56.763Z</wsu:Created>
                   </wsse:UsernameToken>
                </wsse:Security>
             </soapenv:Header>
             <soapenv:Body>
                <olsa:GetMultiActionSignOnUrlRequest>
                   <olsa:customerId>ABC</olsa:customerId>
                   <olsa:userName>XYZ</olsa:userName>
                   <olsa:actionType>launch</olsa:actionType>
                   <olsa:assetId>222499_eng</olsa:assetId>
                   <olsa:groupCode>testgrp</olsa:groupCode>
                </olsa:GetMultiActionSignOnUrlRequest>
             </soapenv:Body>
          </soapenv:Envelope>
       </xsl:template>
    </xsl:stylesheet>
    Thanks
    Shikha Jain
    Edited by: Jain Shikha on Apr 2, 2011 9:51 PM

  • How to display current system Date in the Date Input field ?

    Hi,
    I am having a Date Input field( binded to Data type). On load, i would like to display the current system date filled in that input field.
    How do i achieve this ?
    Reg/Venkat

    Hi Venkatesan,
    In your view in your init() method add the following code:
    wdContext.currentContextElement().setOrderDate(new Date(System.currentTimeMillis()));
    this is if your Date-attribute is in the root of the context.
    else you have to set the date in the node where the date-attribute is present with:
    IYOURNODEElement node = wdContext.createYOURNODEElement();
    node.setOrderDate(new Date(System.currentTimeMillis()));
    regards,
    Björn

  • How cost;ly it is to get the current system time

    I am using this call "System.currentTimeMillis()" to get the current system time. I need to now how costly it is to get the current system time.

    Why don't you time it -:) Run it 10000 times and print the first and last result. The difference is the time it took.

  • How to get current system date and store in db

    may i know how to get the current system date so that i can store it into the database

    java.util.Date is NOT deprecated, just most of its methods are.
    Use
    new java.sql.Date(System.currentTimeMillis());to get the current date. Note that the date in a client machine
    may differ from the clock of the server!
    BTW: java.sql.Date extends java.util.Date.
    Fritz

  • Assign current system date to the existing variant of date field

    Hi Experts,
       I am working with BDC for data uploading. Here I have a different requirement that how to assign the current system date to the existing variant of the  date field .
    The date field is defined as:   select-options s_date type sy-datum.
    Anybody have an idea, pls let me know.
    please help me .
    appreciate your valuable suggestions.
    Thanks.
    Prasad.

    Hi,
    try like this...
    SELECT-OPTIONS: s_date FOR sy-datum DEFAULT sy-datum.
    Arunima

  • How to access current system date???

    Hi Experts,
    I am working on a process wherein a user creates a proposal and a notification is sent to the manager for approval.
    Now i need to send the date of creation as a attribute to the manager.
    Can anyone guide me as to how to get the current system date???
    Thanks a lot.
    Cheers
    Gaurav Raghav

    Hi Wojciech Matulewicz,
    I have tried using this before and i faced this problem.
    When i click on create proposal, the screen just refreshes and the CO execution doesnt ends.
    Without ending this field, however things work fine.
    here is the code:
    Method technicalDescription()
    IGPAttributeInfo date = output.addAttribute("DATE", IGPAttributeInfo.BASE_DATE);
                date.setMultiplicity(IGPAttributeInfo.MULITIPLICITY_1_1);
    Method execute()
    Date currDate = new Date(System.currentTimeMillis());
              contextElement.setDate(currDate);
    Method complete()
    output.setAttributeValue("Date", wdContext.currentContextElement().getDate());
    If i comment out this code, the CO execution works out fine, but on addition of this code the screen refreshes and CO execution doesnt end.
    Am i doing something wrong???
    please help me out with this.
    Thanks.
    Cheers
    Gaurav Raghav

  • Export Preset to Rename with Current system Date?

    Hi All,
    I'm trying to build some export presets with a naming convention to include the current system date, eg: YYYYMMM-Title-Custom Text. This convention is oftened required for photo club, local, national & international photo competitions. The only date function I can find is the 'capture date'. Is there a way to modify the Export Filename Template Editor to include 'current system date' ??
    Edit:
    Sorry forgot to add, LR5.3, Mas OS 10.9.1
    Regards
    Craig

    You need to click the 'Define' button and choose Date/Time Now (Custom Metadata):
    If you need more help, please contact me outside the forum - thanks.
    Rob

Maybe you are looking for