Creation of bussiness partner using idoc CRMXIF_PARTNER_SAVE

Hi,
          how create a bussiness partner using the idoc CRMXIF_PARTNER_SAVE

Hello!
This is not easy, but still...
0. Generate Idoc interface if not done already.
1. Define Idoc port in WE20 transaction, allowing inbound processing of this Idoc type.
2. In WE19 (test Idoc) transaction, you could create Idoc with necessary data. For field reference and some internal commands - visit http://ifr.sap.com and locate appropriate RFC.
3. Test it!
For real samples - you could configure some middleware sites in CRM and assign them to XIF - Idoc interface.  With test program CRMXIF_PARTNER_TEST you could unload Idoc to this destination site.
Good source of Information - Michael Van Geet has some guidelines on how to set up a XIF site. These manuals describes required actions in details.
My best regards, Andrei Dirotchka

Similar Messages

  • Creation of Business Partner through IDOC

    Dear All,
    I have to create a business partner which happens through Idoc of message type DEBCOR. My problem is that though I am getting the IDOC message as incoming type which is also getting processed however the creation of BP is not happening. Since IDOC is also showing in green as successfully processed, I dont have any clue where to check it. Any idea as to what could be the possible problem ?
    best regds
    Subha

    IDocs and BAPIs sometimes behave differently than transactions. You might need to add a user exit specifically for IDoc processing. Otherwise send a message to SAP and have them look at it.

  • Creating the bussiness roles for the bussiness partner using Function modul

    Hi
             How to create the business roles using the function modules for the Business partner.

    You can also assign the role at the time of creation of the business partner itself. Use the function module BAPI_BUPA_FS_CREATE_FROM_DATA to achieve the same.
    If your business partner is already there then you can use the function module BAPI_BUPA_ROLE_ADD.
    <b>Reward points if it helps.</b>

  • Problem with HU during creation of Inbound Delivery using IDoc

    Hi,
    When I am creating Delivery manually and perform Packing, Handling Unit information is stored in VEKP and VEPO tables.
    But when I am processing through IDoc, after passing data to Handling Unit Segments E1EDL37 (Handling unit header), E1EDL39 (Control Segment for Handling Units), E1EDL44 (IDoc: Handling Unit Item - Delivery), It is creating delivery successfully but Handling Unit information is not getting stored in VEKP, VEPO tables.
    Tried most of the notes 912470, 678464, 682506 and all of them say "<i>You use the Idoc DESADV to create inbound delivery with packing data. The delivery is created, Idoc gets status 52 but the Handling Units (HUs) are missing. This is due to a program error. In case the IDoc contains segments to create HUs (E1EDL37), the IDoc processing should end in error status (51) as long as no packing data could be created</i>.".
    Need your advice whether we have to maintain any customizing for this or how to proceed with it.
    Thanks in advance,
    Murali.

    IDocs and BAPIs sometimes behave differently than transactions. You might need to add a user exit specifically for IDoc processing. Otherwise send a message to SAP and have them look at it.

  • Creation of sales order using IDOC

    Hello All,
    PO is created in a website,which comes to SAP as a Idoc.Sales order need to be created with this idoc information. We are extending ORDERS05, since we are in need to add z segment as a child segment of E1EDKA1 to hold 3 email addresses.
    Could anyone say how to handle these email addresses in SAP and which exit is to be used for the same?
    Is that EXIT_SAPLVEDA_001 or EXIT_SAPLVEDA_004.
    Thanks in advance.
    Meenakshi

    Hi,
    its EXIT_SAPLVEDA_001.
    Regards

  • Creation of purchase info using IDOC

    We have a requirement where we creating the purchase info (ME11) via IDOC.
    Currently we are using basic type "INFREC01" to create Info records.
    But this IDOC type has limitations, as this IDOC does not contain scale quantity & some other fields.
    To add these fields we have another IDOC type "COND_A04".
    So, using this IDOC type to create condition Scale Quantity.
    When i am trying to test this basic type COND_A04 in WE19 provding the condition type PB00 and the condition table 017 it gives me error of "Table not available". (checked the condition table in T681 for the condition type pb00)
    Can i know how this can be handled?

    looks like it accepted A017.
    Why did you choose basis type COND_A04 ?
    As this one is very special for long material numbers ( more than 18 digit material numbers) do you have such?
    E1VFSCAH is the Scale header in case of dimension specific scales. do you have such?
    Just try it with COND_A01

  • Creation of PO using IDOC's

    Hi,
    I am trying to create a PO, using IDocs, in the SAP system. The IDoc will come from a non-SAP system - hence, this is an inbound interface.
    Can someone please tell me which Message Type / IDoc Type I should use?
    As well, I need to create Characteristics for the Purchase Order. So, I need an IDoc that allows me to create these.
    Two options (using existing IDocs):
    1. ORDERS/ORDERS05
    I have read some of the help documentation and some of the messages posted on this forum and found that the ORDERS/ORDERS05 is used for outbound PO IDocs, and inbound SO IDocs.
    Can someone please confirm or correct me? So, this option is OUT.
    2. PORDCR/PORDCR05
    Apparently, PORDCR/PORDCR05 can be used for inbound PO. However, it does not contain segments for Characteristics. Hence, I will need to extend the IDoc. However, there aren't any useful user-exits to handle the creation of Characteristic values!
    Any ideas or suggestions will be greatly rewarded .
    Thanks
    Bobby

    on your points
    #1is correct.
    #2 yes, if you need any other functionality you need to extend the IDOC. alternately look at BAPI_PO_CREATE* BAPIs to see if they fulfil your requirements

  • Creation of  sales order using inbound idoc

    hello all,
             I have a scenario where i need to read data from a flat file, then create a sales order with the flat file data using IDOC. we can also create sales order using BAPI but the problem is that we need to handle serveral errors so we want to use IDOC.
           we are trying to use the function modules 'Idoc_input_orders'  but we are not sure how exactly we need to pass the parameters into the function module, actullays data control structure is asking for different parameters like partner, idoc number, idoc port etc which we need not have as we are processing it internally in the same system.
        It would be great if some one could help me regarding.
    Thanks
    krishnam raju N
    Message was edited by:
            krishnam Raju N
    krishnam Raju N

    Hi,
    see FUNCTION 'IDOC_INBOUND_FROM_FILE'
    Regards,
    Clemens

  • Customer master creation using IDOC

    Hi friends,
               I am trying to create customer master into SAP using Idoc. Here pblm is some partner functions already defaulted i want to create some new entries in partner functions when i try to do it online its working fine when i try with idoc the defaulted partner functions are appears double times can any one has any idea whts happening.
    E1KNVVM   
        E1KNVPM (Master customer master partner roles)
            MSGFN : Function
            PARVW : Partner function
            KUNN2 : Customer number of business partner
            DEFPA : Default partner
            KNREF : Customer description of partner 
            PARZA : Partner counter
    the pblm is with these segment.
    Thanks,
    Naren.

    Hi naren,
    The segment E1KNVPM is standard one.Nothing can be done over it . U shold create new segments in we31 and add as
    extension to the basic type and try..
    Regards,
    Nagaraj

  • Stock Transfport Order Creation using IDOC

    Hello Everybody,
    I am trying to create a Stock Transport Order using IDOC's. All configuration for the STO has been done and I have no problems creating these orders using ME21N.
    Now I need to create STO using IDOC. I am using Message Type ORDERS and Basic Type ORDERS05, but I am not sure what Process Code to use in the Partner Profile configuration in order to pick up proper processing module....
    Any help would be appreciated,
    Than you in advance
    Felix

    I ended up writing my own processing FM for this and used BAPI_PO_CREATE1 to post the PO

  • LSMW using IDoc Method *Error :No partner exists with the name '', type ''*

    Hi All,
    I am a newbie. I am trying LSMW using IDoc Method.
    I got an error when i executed Start IDoc Generation step: No partner exists with the name '', type ''
    Could anyone tell what wrong I might have done,
    Thank you,
    Shiv Ram

    Hi,
    You have to setup your IDoc configuration in LSMW:
    1) Enter the menu \Settings\IDoc Inbound Processing
    2) Create a FILE port by clicking "Maintain Ports"
    3) Create a logical system (LS) partner number by clicking "Maintain Partner Numbers"
    4) Be sure your partner profile that you create is "Active" by clicking "Classification"
    5) In the end click "Activate IDoc Inbound Processing" bottom.
    Run your LSMW again. This time it shoud run wothout any problem.
    Hope it helps.
    Chang

  • Error when ECO and BOM creation using IDoc

    Hi experts,
    now i am doing an interface about ECO/BOM creation and changing using IDoc.The idoc type is ECMMAS02 ans BOMMAT04.
    since i know a little about ECO/BOM, can anyone provide some good materials for me?
    and i don't know which fields are mandatory in idoc segment, so i go to tansaction BD30 to run a BOM changing. i input a change number but the idoc log shows that change number does not exist. what is the change number using? where i can implement the changes, e.g, change the quantity? should the change number be used when creation and changing? how can i get this change number?
    thanks a lot in advance!

    Hi experts,
    now i am doing an interface about ECO/BOM creation and changing using IDoc.The idoc type is ECMMAS02 ans BOMMAT04.
    since i know a little about ECO/BOM, can anyone provide some good materials for me?
    and i don't know which fields are mandatory in idoc segment, so i go to tansaction BD30 to run a BOM changing. i input a change number but the idoc log shows that change number does not exist. what is the change number using? where i can implement the changes, e.g, change the quantity? should the change number be used when creation and changing? how can i get this change number?
    thanks a lot in advance!

  • Partner profile in lsmw using idocs

    Hii!
    I have a requirement where i need to convert article master in SAP Retail. I am using LSMW using IDOC. I have followed all the steps of configuration like created a partner profile, a message type(zmsg_type), processcode etc.
    However in LSMW Step: Start Idoc Generation , i get the foll. error:
    <b>Create a partner profile for message type zmsg_type.</b>
    Please help me with this.
    Thanks.

    Go to WE20 and then take your partner profile type from the left hand side and check you have assinged the message type in outbound or inbound parameter(in the right hand side).. if you have not then you will get this error.
    Award if usefule
    Prince

  • Creation of PO/Contract/Scheduling agreement with ref to PR using IDOC

    Hi Experts,
    Is it possible to <b>create PO/Contract/Scheduling agreement</b> <b>with reference to PR</b> <b>using inbound IDOC ?</b>
    If yes, please let me know the segment type and field to be populated for referencing PR in the IDoc .
    Thanks in Advance,
    Best Regards,
    Mitesh Desai

    Hi Aarif,
    Thanks for taking time to reply .
    We are palnning to integrate SAP and non SAP systems.
    The business Process is as under .
    (1) PR will be generated in ERP (Manaul/MRP)
    (2) PR will be coverted into RFQ (for which there is no appropriate source of supply
         in ERP)
    (3) Sourcing will be done in non SAP system. RFQ will be created with dummy vednro (for example say "source") to identify RFQs to be sent to another system.
    These RFQs needs to be sent using IDOC alonwith reference PR numbers and line item numbers.
      Multiple PRs will be combined into one RFQ as multiple line items.
    (4) Non SAP system will do sourcing and generates either PO or master outline agreement and have reference PR/RFQ numbers and line item numbers.
    No SAP system will send PO/outline agreement information to SAP system in XML file format to generate inbound IDOC in SAP .
    (5) This inbound idoc will generate PO/outline agreement in SAP.
    From SAP functionality point of view, I ca createPO/outline agreement with reference to PR but <b>My Question is how I can generate PO/outline agreement in SAP through IDOC and using "Reference PR or RFQ numbers".</b>
    Looking forward to help ASAP.
    Regards,
    Mitesh Desai

  • Creation of Delivery Using IDOC without reference to order

    Pls suggest is there is any way to create delivery using idoc without reference to order. This is very urgent.

    Hi
    Design the inbound idoc in such a way that it carries all the essential data needed to create a delivery document namely the material number, no of units to be deilvery, delivering plant, storage location, shipping point, warehouse number(if applicable) etc.
    Pass all these details to the function module  RV_DELIVERY_CREATE while creating delivery in VL01N and pass the document type as LO which is delivery document without reference to order.
    But it is advised to have atleast a pseudo order with which we have to create the delivery document.
    Pls reward points.

Maybe you are looking for

  • Why is ISDN so much down lately?

    Hi, I encounter lately difficulties accessing SDN. Last week I got stuff like Internal Server Error 500! java.lang.NullPointerException when simply posting a forum message. Yesterday and this morning I got messages that it was down for approx an hour

  • Panasonic sdr-s150 / problem with aspect ratio

    Hi all, I'm about to purchase the sdr-s150 as it fits my needs regarding size vs. picture quality. Before doing so I wanted to make sure that footage from the camera can be edited with the all new imovie 08. And here's my problem with that. I downloa

  • IOS 7.0 downloaded but won't install on iPhone 5

    after accepting the terms and conditions it pops up with the message 'unable to install update- an error occurred installing iOS 7.0' I keep trying to install it over and over but it won't work

  • Samba client doesn't work in Mountain Lion

    I have Mac Mini Early 2009 and Lion installed on it. I tried to update it to Mountain Lion. All was well, there's just one problem. Mountain Lion does not want to be connected to the smb-shares. This applies to all smb-shares - both on Windows, and o

  • Would apple consider displaying hazards on their products, for example, the effects of mercury in their lapotops if they are dumped?

    I am a student doing a project on electrical waste. One of my concepts revolve around the MacBook Pro and I was wondering if apple would consider displaying the effect of their product if it was dumped, for example, a warning printed on the front of