Error when ECO and BOM creation using IDoc

Hi experts,
now i am doing an interface about ECO/BOM creation and changing using IDoc.The idoc type is ECMMAS02 ans BOMMAT04.
since i know a little about ECO/BOM, can anyone provide some good materials for me?
and i don't know which fields are mandatory in idoc segment, so i go to tansaction BD30 to run a BOM changing. i input a change number but the idoc log shows that change number does not exist. what is the change number using? where i can implement the changes, e.g, change the quantity? should the change number be used when creation and changing? how can i get this change number?
thanks a lot in advance!

Similar Messages

Getting Error in SM58 and IDX2 while using IDOC from

Dear All,
Getting error when trying to send FIDCCP02 Idoc from ECC to PI system.
"Basic Type 'FIDCCP02' is unknown"
Getting the same error while trying to import metadata using IDX2 from PI side.
All connections and distribution model are created.
Please help
Regards

hey,
I checked all config again but getting error while checking ocnsistency in BDM5 on ECC system(E1Q).
It is failing when the messge type FIDCC1 reaches PI QA (X1Q) system and the error states
Message type FIDCC1 is not defined
Please check last line of below message:
E1QCLNT001     Checks in own system E1QCLNT001
     Message type     @08\QCheck OK@     Message type FIDCC1 is defined
     Segment filtering     @08\QCheck OK@     No segment filtering
     Conversions     @08\QCheck OK@     No conversion
     Partner profile     @08\QCheck OK@     Partner profile has been created
                                @08\QCheck OK@     .....Port PI_QA
          @08\QCheck OK@     .....Port PI_QA
          @08\QCheck OK@     .....Packet size 0001
          @08\QCheck OK@     .....Basis type FIDCCP02
          @08\QCheck OK@     .....enhancement
     Port     @08\QCheck OK@     Port PI_QA : To PI Quality System
          @08\QCheck OK@     .....Port type: Transactional RFC
          @08\QCheck OK@     .....port version 3: IDoc record types from Version 4.0 onwards
          @08\QCheck OK@     .....Logical address (destination) X1QCLNT001
     Logical address (destination)     @08\QCheck OK@     Logical address (destination) X1QCLNT001 is defined
X1QCLNT001     Checks in partner system X1QCLNT001
     Check of own logical system     @08\QCheck OK@     Own logical system is X1QCLNT001
          @08\QCheck OK@     Logical system is the same as the target address
                   Message Type     *@0A\QCheck resulted in error@*     Message type FIDCC1 is not defined
When I am clicking on error it is taking to WE81 on PI side.
So do I need to add this message type in PI system as it is present in ECC side?
Thanks
Edited by: Chanakya Sharma on Dec 10, 2010 12:10 PM

Errors when inserting and updating form using VIEW.

Here's my view:
CREATE OR REPLACE FORCE
VIEW "SH_ADD_EMPLOYEES_VW" ("EMP_ID", "DEPT_ID", "JOB_DESC_ID", "EMPNO", "EMP_FIRST", "EMP_LAST", "USER_NAME", "USER_INI", "DEPTNO", "DEPT_DESC", "ROLES_ID", "ADMIN", "CREATES", "APPROVES", "QUALITY", "CUST_SVC", "SH_LOCAL",
"SH_OFFICE", "SYSTEM")
AS
select
"SH_EMPLOYEES"."EMP_ID" as "EMP_ID",
"SH_EMPLOYEES"."DEPT_ID" as "DEPT_ID",
"SH_EMPLOYEES"."JOB_DESC_ID" as "JOB_DESC_ID",
"SH_EMPLOYEES"."EMPNO" as "EMPNO",
"SH_EMPLOYEES"."EMP_FIRST" as "EMP_FIRST",
"SH_EMPLOYEES"."EMP_LAST" as "EMP_LAST",
"SH_EMPLOYEES"."USER_NAME" as "USER_NAME",
"SH_EMPLOYEES"."USER_INI" as "USER_INI",
"SH_EMPLOYEES"."DEPTNO" as "DEPTNO",
"SH_EMPLOYEES"."DEPT_DESC" as "DEPT_DESC",
"DOC_ROLES"."ROLES_ID" as "ROLES_ID",
"DOC_ROLES"."ADMIN" as "ADMIN",
"DOC_ROLES"."CREATES" as "CREATES",
"DOC_ROLES"."APPROVES" as "APPROVES",
"DOC_ROLES"."QUALITY" as "QUALITY",
"DOC_ROLES"."CUST_SVC" as "CUST_SVC",
"DOC_ROLES"."SH_LOCAL" as "SH_LOCAL",
"DOC_ROLES"."SH_OFFICE" as "SH_OFFICE",
"DOC_ROLES"."SYSTEM" as "SYSTEM"
FROM "SH_EMPLOYEES" "SH_EMPLOYEES", "DOC_ROLES" "DOC_ROLES"
where "SH_EMPLOYEES"."EMP_ID" = "DOC_ROLES"."EMP_ID"
Here's my trigger (note - I am not using the EXCEPTION clause or (declaration of it) because it throws an error on msg=>: 'This is my message.' Any help here would be great as well.)
CREATE OR REPLACE TRIGGER bi_ADD_EMPLOYEES_VW
INSTEAD OF insert ON SH_ADD_EMPLOYEES_vw
for each row
declare
duplicate_info EXCEPTION;
PRAGMA EXCEPTION_INIT(duplicate_info, -00001);
begin
insert into SH_EMPLOYEES
(EMP_ID, DEPT_ID, JOB_DESC_ID, EMPNO, EMP_FIRST, EMP_LAST, USER_NAME, USER_INI, DEPTNO, DEPT_DESC)
values
(:new.EMP_ID, :new.DEPT_ID, :new.JOB_DESC_ID, :new.EMPNO, :new.EMP_FIRST, :new.EMP_LAST, :new.USER_NAME, :new.USER_INI, :new.DEPTNO, :new.DEPT_DESC);
insert into DOC_ROLES
(ROLES_ID, ADMIN, CREATES, APPROVES, QUALITY, CUST_SVC, SH_LOCAL, SH_OFFICE, SYSTEM)
VALUES (
:new.ROLES_ID, :new.ADMIN, :new.CREATES, :new.APPROVES, :new.QUALITY, :new.CUST_SVC, :new.SH_LOCAL, :new.SH_OFFICE, :new.SYSTEM);
EXCEPTION
WHEN duplicate_info THEN
RAISE_APPLICATION_ERROR (
num=> -20107
msg=> 'Duplicate employee');
END bi_ADD_EMPLOYEES_VW;
ERROR ON UPDATE:
ORA-20505: Error in DML: p_rowid=1001,
p_alt_rowid=EMP_ID, p_rowid2=2, p_alt_rowid2=ROLES_ID. ORA-01779: cannot modify
a column which maps to a non key-preserved table
ERROR ON INSERT:
ORA-01400: cannot insert NULL into
("SPICE_HUNTER1"."SH_EMPLOYEES"."EMP_ID") ORA-06512: at
"SPICE_HUNTER1.BI_SH_ADD_EMPLOYEES_VW", line 3 ORA-04088: error during execution
of trigger 'SPICE_HUNTER1.BI_SH_ADD_EMPLOYEES_VW' ORA-06512: at
"SYS.WWV_DBMS_SQL", line 549 ORA-06512: at "APEX_040000.WWV_FLOW_DML", line 1121
ORA-22816: unsupported feature with RETURNING clause
Error Unable to process row on table SH_ADD_EMPLOYEES_VW

From what I see you are not handling emp_id when it is null.. you need to assign it a value when null from sequence.. that column cannot be null, hence the error, and in order to "modify" a column in that table the DML needs that id to have a value.

IPhoto had an error when updating and now says: "Use the Purchases page to try again."

Before I went to school yesterday morning I started the iPhoto update so when I got back it would be done. So I looked to see if the update was finshed and it said: "An error haas occured" next to the update button. So I hit update again and it came up with what you see in the picture below.
So I went to the purchase tab and tried again and the same thing happened again! What do I do? Thank you!

Hi there!
Did you get any explanation for that "8.8.8.8-solution"? Very strange but it seemed to work with me but only for some apps.
My problem doesn't look the same though. I managed to download all big apps like iPhoto and Xcode but the small ones never get installed properly. I see they are being downloaded but after that I get "Installed" button and a message to use purchases tab again and the app is not installed on Applications folder.
On ML 10.8.0 Mac App Store was downloading and re-downloading these small apps adn the only way I found to solve this was pause the download, add the 8.8.8.8 to DNS and resume. I worked for some apps.
On ML 10.8.2 Mac App Store behavior is a little different, I only get "Installed" button shortly after having hit "Install" and cannot even pause. After reboot I see an error message in red "An error has ocurred".
This is not happenning on Snow Leopard, what the heck have they done??
I tried all suggestions, reset Mac App Store, delete cache folder, I don't have any anti-virus running,
What's happenning? This is reallly annoying...
L.

I have a A12E6 error when downloading and installing apps

I have an
A12e6 error when downloading and installing apps yesterday i had the A12e1 error so i used the cleaner tool and did a new install but today again i have an arror A12e6
Do you have a solution for me???? (mac osx 10.7.5)
kind regards Arold

Hi Arold,
Welcome To The Forums
http://forums.adobe.com/thread/1197816 or http://forums.adobe.com/thread/1291134 may help,
Thanks!
Eshant

Keep getting this error when ever I try to use the CC_2014

keep getting this error when ever I try to use the CC_2014 InDesign
Unable to launch Adobe InDesign as you do not have sufficient permissions to access the preferences folders. Ensure that you have appropriate permissions and then restart Adobe InDesign.
Also have Ai quit out on me in the CC_2014.
This is very frustration since I use these the most

For MAC try to give permissions to Adobe Indesign Folder:
Users/[user]/Library/Caches/Adobe InDesign
Users/[user]/Library/Preferences/Adobe InDesign
Access hidden user library files | Mac OS 10.7 and later
For Windows try to give permissions to Adobe Indesign Folder:
C:\Users\[username]\AppData\Roaming\Adobe\InDesign
C:\Users\[username]\AppData\Roaming\Adobe\InDesign
Also you can try logging in under a local administrator account as suggested by jeff.

Recd following error when attempt to open ebook using ADE 4.0 : "Unable to Download. Error getting License. License Server Communication Problem: E_LIC_LICENSE_SIGN_ERROR" iMac 10.8.5 Chrome Version 37.0.2062.124

recd following error when attempt to open ebook using ADE 4.0 : "Unable to Download. Error getting License. License Server Communication Problem: E_LIC_LICENSE_SIGN_ERROR" iMac 10.8.5 Chrome Version 37.0.2062.124
chat with customer service at book company i purchased file:
"Me: I installed the proper adobe software, adobe digital editions 3.0 (now have updated to 4.0) on my mac running os 10.85 however I am getting the following error code when i try to open the file:
"Error getting License. License Server Communication Problem:
E_LIC_LICENSE_SIGN_ERROR"
Charles P.: Okay, what you need to do unfortunately, is contact Adobe at http://www.adobe.com and they will need to get your license issue resolved.
Charles P.: Is there anything else I can assist you with today?
Me: title of error is Unable to Download
Me: i dont see how that would be an adobe problem?
Charles P.: I understand, but it appears that the reason for the download issue is because of the license error the license is related to the Adobe Digital editions software. I understand how this could be confusing but it's due to the authorization of the ADE software. Adobe would need to correct your account issue with the license
Me: ok but i thought this was a free license from adobe??!! this is just a digital editions reader, right??
Charles P.: That is correct it is a free license but your account has to be associated with one license and yes the Digital edition is a ebook reader that our ebooks use for you to view

Well, just for the halibut I tried opening the book again today and , GLORY BE!, it worked.
Guess it may have taken overnight for Adobe to OK my license to their free ADE software. Also works now using Bluefire app as the reader on my android phone, although it was a pain
to get the book file in the right file folder for bluefire to see it.
I hope that time also heels the issue with all other Error Getting License users.
panman

WLST - error when i start managed server using nmstart() command.

i am receiving an error when start the managed server using nmstart(). Please advise.
Do I have add any parameter to nodemanager.properties file?
Thankyou
pasted below is the error message i am receiving when i start managed server.
Starting server hssclient ...This Exception occured at Thu Mar 19 10:30:02 EDT 2
009.
java.lang.IllegalArgumentException: Invalid host name: Null or empty
at weblogic.nodemanager.client.NMClient.checkNullOrEmpty(NMClient.java:7
2)
at weblogic.nodemanager.client.NMClient.setHost(NMClient.java:79)
at weblogic.nodemanager.mbean.NodeManagerRuntime.getNMClient(NodeManager
Runtime.java:527)
at weblogic.nodemanager.mbean.NodeManagerRuntime.getNMClient(NodeManager
Runtime.java:565)
at weblogic.nodemanager.mbean.NodeManagerRuntime.start(NodeManagerRuntim
e.java:188)
at weblogic.server.ServerLifeCycleRuntime.startServer(ServerLifeCycleRun
time.java:439)
at weblogic.server.ServerLifeCycleRuntime.start(ServerLifeCycleRuntime.j
ava:124)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at weblogic.management.jmx.modelmbean.WLSModelMBean.invoke(WLSModelMBean
.java:428)
at com.sun.jmx.mbeanserver.DynamicMetaDataImpl.invoke(DynamicMetaDataImp
l.java:213)
at com.sun.jmx.mbeanserver.MetaDataImpl.invoke(MetaDataImpl.java:220)
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.invoke(DefaultM
BeanServerInterceptor.java:815)
at com.sun.jmx.mbeanserver.JmxMBeanServer.invoke(JmxMBeanServer.java:784
at weblogic.management.mbeanservers.domainruntime.internal.FederatedMBea
nServerInterceptor.invoke(FederatedMBeanServerInterceptor.java:248)
at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$16.
run(WLSMBeanServerInterceptorBase.java:443)
at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.inv
oke(WLSMBeanServerInterceptorBase.java:441)
at weblogic.management.mbeanservers.internal.SecurityMBeanMgmtOpsInterce
ptor.invoke(SecurityMBeanMgmtOpsInterceptor.java:63)
at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$16.
run(WLSMBeanServerInterceptorBase.java:443)
at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.inv
oke(WLSMBeanServerInterceptorBase.java:441)
at weblogic.management.mbeanservers.internal.SecurityInterceptor.invoke(
SecurityInterceptor.java:426)
at weblogic.management.mbeanservers.internal.AuthenticatedSubjectInterce
ptor$10$1.run(AuthenticatedSubjectInterceptor.java:582)
at weblogic.management.mbeanservers.internal.AuthenticatedSubjectInterce
ptor$10.run(AuthenticatedSubjectInterceptor.java:580)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(Authenticate
dSubject.java:363)
at weblogic.management.mbeanservers.internal.AuthenticatedSubjectInterce
ptor.invoke(AuthenticatedSubjectInterceptor.java:573)
at weblogic.management.jmx.mbeanserver.WLSMBeanServer.invoke(WLSMBeanSer
ver.java:310)
at javax.management.remote.rmi.RMIConnectionImpl.doOperation(RMIConnecti
onImpl.java:1410)
at javax.management.remote.rmi.RMIConnectionImpl.access$100(RMIConnectio
nImpl.java:81)
at javax.management.remote.rmi.RMIConnectionImpl$PrivilegedOperation.run
(RMIConnectionImpl.java:1247)
at javax.management.remote.rmi.RMIConnectionImpl.doPrivilegedOperation(R
MIConnectionImpl.java:1350)
at javax.management.remote.rmi.RMIConnectionImpl.invoke(RMIConnectionImp
l.java:784)
at javax.management.remote.rmi.RMIConnectionImpl_WLSkel.invoke(Unknown S
ource)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:553)
at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:443)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(Authenticate
dSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:
147)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.jav
a:439)
at weblogic.rmi.internal.BasicServerRef.access$300(BasicServerRef.java:6
1)
at weblogic.rmi.internal.BasicServerRef$BasicExecuteRequest.run(BasicSer
verRef.java:983)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)

Hi I am getting below exception, is nmStart only start AdminServer ????
There are 1 nested errors:
weblogic.management.ManagementException: Booting as admin server, but servername, MS1, does not match the admin server name, AdminServer
at weblogic.management.provider.internal.RuntimeAccessService.start(RuntimeAccessService.java:67)
at weblogic.t3.srvr.ServerServicesManager.startService(ServerServicesManager.java:461)
at weblogic.t3.srvr.ServerServicesManager.startInStandbyState(ServerServicesManager.java:166)
at weblogic.t3.srvr.T3Srvr.initializeStandby(T3Srvr.java:803)
at weblogic.t3.srvr.T3Srvr.startup(T3Srvr.java:493)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:446)
at weblogic.Server.main(Server.java:67)
>
<Feb 10, 2010 1:45:17 PM UTC> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>
<Feb 10, 2010 1:45:17 PM UTC> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down>
<Feb 10, 2010 1:45:17 PM UTC> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
<Feb 10, 2010 1:45:17 PM> <FINEST> <NodeManager> <Waiting for the process to die: 8275>
<Feb 10, 2010 1:45:17 PM> <INFO> <NodeManager> <Server failed during startup so will not be restarted>
<Feb 10, 2010 1:45:17 PM> <FINEST> <NodeManager> <runMonitor returned, setting finished=true and notifying waiters>
~

Error when login and authorizing my new computor

error when login and authorizing my new computor

Zachy,
It goes something like this...
Put your new drive in the enclosure. Use Disk Utility to format it, etc. I'd give it a slightly different name than the original. Let's say you have Old Disk and New Disk as your drive names. Use Carbon Copy Cloner to copy Old Disk to New Disk. Now you should have an exact copy, which you can test by rebooting and holding down the Option key. Choose New Disk from the list and let it boot, make sure all is well.
Shut down and physically swap the drives. Take Old Disk and put it in the enclosure. Now your system has a new disk with a lot more space and you can reformat your old disk and just use it for large files or whatever.

WAD-Internal Error when generating the history. Use a different view!

Hello,
When i am trying to open the WAD(Webapplication designer), BEx Open Dialog is being displayed with the message "Internal Error when generating the history. Use a different view"
how to solve this problem...?
Thanks
kumar

Hello Jeff,
Thanks for your help, and it has solved my problem. Under Activate Personalization in BEx...
I have seen 2 more options
-Variable Personalization
-Web Reportperson
Could you inform me the pupose of above 2 options?
Regards..

Gettign this error when trying to access webpage using JRE V 1.4.2_06

Gettign this error when trying to access webpage using JRE V 1.4.2_06
Any suggestions?
java.io.IOException
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.getInputStream(Unknown Source)
at java.net.HttpURLConnection.getResponseCode(Unknown Source)
at sun.net.www.protocol.https.HttpsURLConnectionImpl.getResponseCode(Unknown Source)
at sun.plugin.cache.CachedFileLoader.load(Unknown Source)
at sun.plugin.cache.FileCache.get(Unknown Source)
at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.connectWithCache(Unknown Source)
at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.connect(Unknown Source)
at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.getInputStream(Unknown Source)
at java.net.HttpURLConnection.getResponseCode(Unknown Source)
at sun.net.www.protocol.https.HttpsURLConnectionImpl.getResponseCode(Unknown Source)
at sun.applet.AppletClassLoader.getBytes(Unknown Source)
at sun.applet.AppletClassLoader.access$100(Unknown Source)
at sun.applet.AppletClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.applet.AppletClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadCode(Unknown Source)
at sun.applet.AppletPanel.createApplet(Unknown Source)
at sun.plugin.AppletViewer.createApplet(Unknown Source)
at sun.applet.AppletPanel.runLoader(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Caused by: java.net.SocketException: Connection reset
at java.net.SocketInputStream.read(Unknown Source)
at com.sun.net.ssl.internal.ssl.InputRecord.a(Unknown Source)
at com.sun.net.ssl.internal.ssl.InputRecord.read(Unknown Source)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(Unknown Source)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(Unknown Source)
at com.sun.net.ssl.internal.ssl.AppInputStream.read(Unknown Source)
at java.io.BufferedInputStream.fill(Unknown Source)
at java.io.BufferedInputStream.read1(Unknown Source)
at java.io.BufferedInputStream.read(Unknown Source)
at sun.net.www.http.HttpClient.parseHTTPHeader(Unknown Source)
at sun.net.www.http.HttpClient.parseHTTP(Unknown Source)
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.getInputStream(Unknown Source)
at sun.net.www.protocol.https.HttpsURLConnectionImpl.getInputStream(Unknown Source)
at sun.plugin.net.protocol.http.HttpUtils.followRedirects(Unknown Source)
at sun.plugin.cache.CachedFileLoader.download(Unknown Source)
... 21 more
java.io.IOException
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.getInputStream(Unknown Source)
at java.net.HttpURLConnection.getResponseCode(Unknown Source)
at sun.net.www.protocol.https.HttpsURLConnectionImpl.getResponseCode(Unknown Source)
at sun.plugin.cache.CachedFileLoader.load(Unknown Source)
at sun.plugin.cache.FileCache.get(Unknown Source)
at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.connectWithCache(Unknown Source)
at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.connect(Unknown Source)
at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.getInputStream(Unknown Source)
at java.net.HttpURLConnection.getResponseCode(Unknown Source)
at sun.net.www.protocol.https.HttpsURLConnectionImpl.getResponseCode(Unknown Source)
at sun.applet.AppletClassLoader.getBytes(Unknown Source)
at sun.applet.AppletClassLoader.access$100(Unknown Source)
at sun.applet.AppletClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.applet.AppletClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadCode(Unknown Source)
at sun.applet.AppletPanel.createApplet(Unknown Source)
at sun.plugin.AppletViewer.createApplet(Unknown Source)
at sun.applet.AppletPanel.runLoader(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Caused by: java.net.SocketException: Connection reset
at java.net.SocketInputStream.read(Unknown Source)
at com.sun.net.ssl.internal.ssl.InputRecord.a(Unknown Source)
at com.sun.net.ssl.internal.ssl.InputRecord.read(Unknown Source)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(Unknown Source)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(Unknown Source)
at com.sun.net.ssl.internal.ssl.AppInputStream.read(Unknown Source)
at java.io.BufferedInputStream.fill(Unknown Source)
at java.io.BufferedInputStream.read1(Unknown Source)
at java.io.BufferedInputStream.read(Unknown Source)
at sun.net.www.http.HttpClient.parseHTTPHeader(Unknown Source)
at sun.net.www.http.HttpClient.parseHTTP(Unknown Source)
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.getInputStream(Unknown Source)
at sun.net.www.protocol.https.HttpsURLConnectionImpl.getInputStream(Unknown Source)
at sun.plugin.net.protocol.http.HttpUtils.followRedirects(Unknown Source)
at sun.plugin.cache.CachedFileLoader.download(Unknown Source)
... 21 more
load: class com.adp.e.hrclient.Client.class not found.
java.lang.ClassNotFoundException: com.adp.e.hrclient.Client.class
at sun.applet.AppletClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadCode(Unknown Source)
at sun.applet.AppletPanel.createApplet(Unknown Source)
at sun.plugin.AppletViewer.createApplet(Unknown Source)
at sun.applet.AppletPanel.runLoader(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Caused by: java.net.SocketException: Connection reset
at java.net.SocketInputStream.read(Unknown Source)
at com.sun.net.ssl.internal.ssl.InputRecord.a(Unknown Source)
at com.sun.net.ssl.internal.ssl.InputRecord.read(Unknown Source)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(Unknown Source)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(Unknown Source)
at com.sun.net.ssl.internal.ssl.AppInputStream.read(Unknown Source)
at java.io.BufferedInputStream.fill(Unknown Source)
at java.io.BufferedInputStream.read1(Unknown Source)
at java.io.BufferedInputStream.read(Unknown Source)
at sun.net.www.http.HttpClient.parseHTTPHeader(Unknown Source)
at sun.net.www.http.HttpClient.parseHTTP(Unknown Source)
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.getInputStream(Unknown Source)
at java.net.HttpURLConnection.getResponseCode(Unknown Source)
at sun.net.www.protocol.https.HttpsURLConnectionImpl.getResponseCode(Unknown Source)
at sun.applet.AppletClassLoader.getBytes(Unknown Source)
at sun.applet.AppletClassLoader.access$100(Unknown Source)
at sun.applet.AppletClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)

I got it, i only had to check the option 'Use SSL 2.0 compatible ClientHello format' from the java's control panel advanced tab.
Metalink's note: 787739.1
:)

Window pops up stating"browser error" when trying to access documents using google doc's. Holding shift key and refresh does not clear window. What's next?

Shut down and restarted computer, "browser error" still pops up when trying to access documents using Google doc's.
Holding shift key and clicking refresh does not clear window.
What else can be done to clear the window and gain access to my documents?

Hi,
Found a note explaining the significance of these errors.
It says:
"NZE-28862: SSL connection failed
Cause: This error occurred because the peer closed the connection.
Action: Enable Oracle Net tracing on both sides and examine the trace output. Contact Oracle Customer support with the trace output."
For further details you may refer the Note: 244527.1 - Explanation of "SSL call to NZ function nzos_Handshake failed" error codes
Thanks & Regards,
Sindhiya V.

Error with quantity field:Datasource Creation Using Function Module method

Problem with DATASOURCE Creation using Function Module method :
I have created a datasource ZSTANDARD_COST_PRICE using Function Module method . The datasource creation is successfull when I remove the quantity field from the Z table . If I dont remove the quantity field from my Z table it gives an error as "Units Field WAERS for field STPRS of datasource ZSTANDARD_COST_PRICE is hidden". I am not able to remove this error . Please someone guide.
Let me know if my explanation is not clear enough.
Thanks in advance,
Neha.
Z table definition is as below :
MATNR MATNR CHAR 18 0 Material Number
BWKEY BWKEY CHAR 4 0 Valuation area
LFGJA LFGJA NUMC 4 0 Fiscal Year of Current Period
STPRS STPRS CURR 11 2 Standard Price " Here the currency field is WAERS and table T001
PEINH PEINH DEC 5 0 Price Unit
VJSTP VJSTP CURR 11 2 Standard price in previous year
VJPEI VJPEI DEC 5 0 Price unit of previous year.
Edited by: Neha Rathi on Jan 30, 2009 3:03 PM

Hi,
You should add it as one of the main fields as you have added other fields and not as the currency fields...that is..it should be part of the data source and you should be able to see it in RSO2...
Also if added as i said then it will come as new field in the data source...you can either let it be there...or hide it..
also if you want to populate it then you will have to write the code for this fields as well.
Thanks
Ajeet

Inbound Processing : Error when changing a BOM

Hi Experts,
I have the following error when I send a BOMMAT IDoc in "Change" Mode (Editing the BOM, to recreate the History inthe Target system) :
Start processing in API: CSAP_MAT_BOM_MAINTAIN
Group BOM
Changes to the BOM exist after 03.11.2008
Date 03.11.2008 copied from change number
Item (1) 0040 L 000000001084237016 000000000000000000000000 cannot be uniquely identified
Item (3) 0100 L 000000001084237021 000000000000000000000000 cannot be uniquely identified
Item (6) 0200 L 000000000768041196 000000000000000000000000 cannot be uniquely identified
End of processing in API: CSAP_MAT_BOM_MAINTAIN
Any idea ?
Regards,
David

Hi Gordon,
I think I found something.
When I create a BOM with ALE in the Target, no problem. Then when I want to update it, I've got this error ...
In the Source, we're working with Text Object for Text Item (INCLUDE Text ID). But in the Target, Text Object doesn't exist, and when we update or modify the BOM via ALE, the Inbound Process try to find the old Text Object before updating it with the new one ...
I think the solution is to create all Text Object/ID (Ta SO10) in the Target ... I don't understand why the ALE Inbound Process doesn't create Text Objects if they don't exist...
Regards,
David

I can not re-install/ update apple iTunes on my HP PC running Win7-64. I get a registry key error when installing and am asked to make sure I have access. IT is a home PC with one user and I have admin priveledges.

When the updater notified me of an iTunes update, I selected the update option. The update failed and killed the version I was running. I have tried for a year to fix the problem without sucess. I can't completely remove all Apple products. I can not install any apple products especially iTunes which is the only one I am interested in.
When I install iTunes now I get a registry key error similar to this:
I am using a machine where I am the only user and am the Admin. I have looked at the security settings on this key and see nothing wrond with it or the parent keys. I tried removing all apple products but ran into similar problems. At this time I still have Bonjour. Mobile Device Support, Software Update, and Application Support installed.

These ones are tricky. But the following instructions are worth a try.
First do a complete uninstall of iTunes and related components (but don't reinstall just yet), as per the following document:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
a. Launch regedit (Start >> Search Programs and Files >> type Regedit and open the regedit that comes up.)
b. Access the following Location: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Installer\UserData \S-1-5-18\Components
c. Perform the following actions
i. Right Click on Components Folder
ii. Select Permissions
iii. Select Full Control and Read Permissions options
iv. Select Advanced Button
v. Select Owner Tab
vi. Select to Change Owner to the Administrators
vii. Check the option “Replace owner on subcontainers and objects”
viii. Select OK when prompted that it may not change all.
ix. Select Apply
x. Select Apply again
xi. Exit the Registry Editor
Now try reinstalling iTunes again. Does it go in properly this time?

Error when ECO and BOM creation using IDoc

Similar Messages

Maybe you are looking for