Creation of customer using BAPI_CUSTOMER_CREATEFROMDATA1

hi Techies..
i want to create customer in effects in KNA1.
iam using FM "BAPI_CUSTOMER_CREATEFROMDATA1".
first is it correct one to create customer.
nxt is the mandat fields given in documentation and mandat fields while we create through XD01 are different.
plz list out mandat fields i need to pass...
plz anyone help me out wts process of creation of customer through this bapi..
Thanks in Adv..
Raju Mummidi

HI
Re: BAPI function create Customer master(T-code XD01)??
For XD01-- account group and customer number are mandatory.
Re: BAPI for creating customers
Regards
Pavan

Similar Messages

Error during create CR for MDGC "Enter a relevant role for creation of customer master data"

Hello Experts,
I am unable to create a Customer CR in 'MDG 6.1 Customer UI' , the UI throws an error saying "Enter a relevant role for creation of customer master data".It looks like it is expecting me to mention the BP role ( like FLCU01 Customer or FLCU00 FI Customer ) , but I don't see that BP role section in the Customer UI to mention .
While creating the vendor CR , I am able to enter the BP role ( like FLVN01 vendor or FLVN00 FI Vendor ) in the UI BP Role section.
Following are the UI's for Customer and Vendor
Customers BS_OVP_BP: BS_OVP_CU > OVP: BS_CU_OVP - I do not see BP role section here.
Vendors BS_OVP_BP: BS_OVP_SP > OVP: BS_SP_OVP - This is working fine , I see BP role section here.
Please advice what I am missing here , what should I do for the successful CR creation . Should I change the UI for Customers or do I need to do anything in CVI configuration.
Thanks,

Hi Abdullah,
You were right in the first place the UIBB is missing , the UIBB 'Role' was present in the 'Search Customer' page but not available in the 'Create Customer CR' page , so I created the 'Role' UIBB again and was able to create the CR now . Not sure how it got deleted in the first place , is there any options where we reset the UI screen to the default initial configuration
But after approving the CR , only the Business Partner BP is getting created and the Customer is not getting created . Not sure what might be the issue now. Is there any config that tells to automatically create customer when BP is created. I was able to create Vendor using the create Vendor CR before.
Thanks

Issue in Program for mass creation of customer plans.

Hello all,
I am working on a program which helps mass creation of customer plans. My code works well, when no planning account is assigned, but when I pass the planning account value into the Function module, it gives me an error saying ' Account cannot be displayed, please check your authorizations'. I donot have this problem, when I manually createthe customer plan in the CRM_UI.
Please let me know the possible cause for this kind of message.
Thanks,
Disha.

Hi Dishaa,
I'm afraid that I don't have any other clues. Most often it is a difference in user. If you are absolutely sure that you are using the same user at the exact moment the authorization is checked it cannot be that.
Kinda curious now what the solution to your problem is....
Best regards,
Guus
Edited by: Guus Jansen on Feb 14, 2011 1:32 PM

R12 Creation of Custom Responsibilities

Hi,
We are currently on R12 with a single org setup and and have a requirement to create custom resp. to control user access.
Pls. let me know if creation of custom menus, sub menus, request groups is the right option OR menu, function exclusions a better option.
When compared to 11i does R12 require any additional setups apart from New Resp, Menu, Submenu, Functions, Request Groups, Profile Options..?
Any metalink note Id which discusses detail of creation of custom resp. in R12 will be of great help.
Thanks

Hi,
The only way you can restrict an user to do certain activities only by defining multiple custom responsibilities... e.g.. A user should not have the privilege to do setups in the system.. He is authorised to do trxs only.. for that you define a Responsibility like "Inventory User" and exclude "setup" function/menu while defining the Responsibility... Now assign this resp to the user..By using this he will be able to do trxs only but he can't do setup or setup changes in Inventory module...
Your question: Pls. let me know if creation of custom menus, sub menus, request groups is the right option OR menu, function exclusions a better option.
To my know knowledge menu, function exclusion is a better option….
Inventory Responsibilities (e.g.)
==============================================================
Name: Application: Responsibility Key: Description: Effective Start date: Data Group Name: Data Group Application: Menu: Request Group Name: Request Group Application: Read Only Access Exclusions: (Menu) Exclusions: (Menu) Exclusions: (Function) Exclusions: (Function) Exclusions: (Function)
==============================================================
EU_INV_CZE_CLERK_1 Inventory EU_INV_CZE_C1 EU_INV_CZE_CLERK_1 1-Jan-90 Standard Inventory INV_CLERK_1 All Inclusive GUI Inventory Manage Shipments Corrections
EU_INV_CZE_CLERK_2 Inventory EU_INV_CZE_C2 EU_INV_CZE_CLERK_2 1-Jan-90 Standard Inventory INV_CLERK_2 All Inclusive GUI Inventory INV_CYCLE_COUNTING Manage Shipments Corrections
EU_INV_CZE_CLERK_3 Inventory EU_INV_CZE_C3 EU_INV_CZE_CLERK_3 1-Jan-90 Standard Inventory INV_CLERK_3 All Inclusive GUI Inventory Miscellaneous Transaction
EU_INV_CZE_SUPERVISOR Inventory EU_INV_CZE_SUPV EU_INV_CZE_SUPERVISOR 1-Jan-90 Standard Inventory INV_NAVIGATE All Inclusive GUI Inventory INV_SETUP INV_KANBAN Launch Cost Update Standard Cost Update
Above supervisor resp will restrict user not do setups and he can't do cost update
**EU_INV_CZE_Super User* Inventory EU_INV_CZE_SU EU_INV_CZE_ Super User 1-Jan-90 Standard Inventory INV_NAVIGATE All Inclusive GUI Inventory Launch Cost Update Standard Cost Update_
Above super User resp will allow user do setups in Inventory but he can't do cost update as Supervisor resp
EU_INV_CZE_Setup View Inventory EU_INV_CZE_SUVO EU_INV_CZE_ Setup View 1-Jan-90 Standard Inventory INV_SETUP All Inclusive GUI Inventory Yes
Question-2_
When compared to 11i does R12 require any additional setups apart from New Resp, Menu, Submenu, Functions, Request Groups, Profile Options..?
Ans : No… since you are setting up resp for a single org now.
Hope this will help.
Thanks,
S.P DASH
Edited by: spdash12 on Oct 22, 2009 11:25 AM

How to get Name 2 also when we search for a customer using 'Name' as search

In XD03, when I am searching for Customer using Name as Search term I am getting postal code, Name1, City, Customer no. I want Name2 also to be displayed. Can somebody please suggest.
Thank you.

hi,
for this you will have to change the search term involved during the master data creation.
now during the creation of customer master data , enter the name as the search term in the data base.
if possible change the database of customers and insert the name in the search term.
without it, it will be really difficult to locate the customers with the search term as their name
regards,
Siddharth.

Creation of custom Infocubes, extractors and multiprovider

Hi all,
Can somebody give me the information regarding the creation of custom Infocubes, extractors, and multiproviders. It would ne great if you could give me some examples regarding the above in SD.
Thanks,
Sekhar

We will go for the creation of custom infocubes
when the existing business content doesnot suite your requirement.
when u r using the one existing business content extractor and u need the same requirement for another cube u can create your own extractor of the same type without changning the existing one.
we will use multiproviders for reporting purpose. suppose if u are having some 3 infocubes and u want to display the fields from the 3 cubes then go for the creation of multiprovider.

Problem in creation of Customer Master

Hi gurus,
I am facing problem in creation of customer master.
I have created a account group zz01 copying from 0001.which has internal no. assignement for the customer.
Now i am trying to create a customer master, at partner functions level under sales area data... the system is asking for the no. for each partner functions.. when i tried to manually enter, the system is not taking any number nor it is letting me save the data.
Please help me out in acertaining, what could be the issue.
regards
Gupta
[email protected]

its due to the number ranges that is specified in the partner determination ... chech what is the number range assigned in the parner determination ,,, so once u check that u have to manually enter the number between that range only .. this should solve ur problem...
path to check the number range is as below :
spro-img-logistic generalbusiness partner-customers---define account groups and field selection ---
at this point click position button at the bottom and give ur account group .. select ur account group and click detail button .. now inside that u can see the specified number range .. dafault is 08 ( means u can specify between 400000 to 499999)..
and some times u may not have defined number range... check urs and create accordingly ... this should solve ur problem...
rewards if solved ..
thank you
madhan

I built a website for a customer using HTML only, so it would work on everything, but some of the text numbers are not clear on the ipad. It works perfectly on all the other browsers.

I built a website for a customer using HTML only, so it would work on any browser, and it works perfectly on everything except ipad safari. I'm loosing information with most of my text numbers - instead of being black they are displaying a 'ghost' image (white) of the numbers.
Is this a memory issue, or cache issue, or something else? I've downloaded iCab and the site works perfectly with it.
Also wondering if I can manually reload/refresh web pages in iPad Safari.
Since most people with iPads will use Safari rather than iCab, I have to tweak this site to work in Safari.

Detecting phone numbers and making them clickable is a feature of the browser, and rebuilding your web-site links will not make any difference. Its done when the page is shown in the browser, not when the page is created.
According to the Safari iOS developers guide, you can turn these data detectors off using this code:
<meta name = "format-detection" content = "telephone=no">
http://developer.apple.com/library/ios/#featuredarticles/iPhoneURLScheme_Referen ce/Articles/PhoneLinks.html

Sending an email to customer using VF02

Hi Experts
can anyone help me with the code sending an email to customer using TC:vf02.i already done with config .please help me.

Reddy,
Please search in SDN you will find lots of post pertaining to your issue.
Check this link you might get answers to your problem.
send email after save VA01
Cheers.

Creation of role using T-code PFCG in R/3

Hi Experts,
I have created a Role using PFCG inorder to give acess only to three T-codes(PZ09. PZ80,PZ88).
so i have created a role intially using PFCG and incorporated PZ09 tcode in it and assigend the Role to users in R/3. it is displaying the TCode(PZ09) in Portal.
Now again i have added PZ80 & PZ88 to the same Role in R/3, but now i am getting an error:
Infotype 0000 does not exist.
but whereas when i assign SAP_ALL they(PZ88 & PZ 80) are working fine.
Is they anything i can do so that i can avoid assigning SAP_ALL Profile to the users and eliminate the Error "Infotype 0000 does not exist.
Thanks Inadvance,
Regards,
Siva

Hi,
Thanks for your reply,
Creation of role using T-code PFCG in R/3
The above link has solved my issue, Thank you!
Regards,
Siva

Creation of Material using BDC Session method & global class

Hi
Creation of Material using BDC Session method & global class by using oops.
can anyone plz help me out

Hi,
it looks like it's not possible to call this BAPI wihtout material number. Here is a quote from BAPI documentation.
When creating material master data, you must transfer the material
number, the material type, and the industry sector to the method. You
must also enter a material description and its language.
Cheers

Display list of sales orders for one particular customer using BAPI in WD

Friends,
i want to display list of sales orders for one particular customer, the materials ordered, quantity ordered, goods issue date of that particular order and contact information about that particular customer, using Webdynpro.
Please somebody send me related info,blogs,help links , to complete this task, this is very urgent.
Please help
Peter

Find the WD tutorials here...
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webdynpro/web%20dynpro%20sample%20applications%20and%20tutorials.htm">Tutorials</a>

Problem regarding the creation of Table using CSS.

Hi ,
Here I have a Problem regarding the creation of Table using CSS.
In My Application i have a table with multiple rows(Rows are Dynamically added to the table).First i am setting the table with the following properties:
width:900px;
height : auto,
Overflow : visible,
Max-height: : 200px.
If I use above properties,I'm getting a table with 5 or 6 rows(height upto 200px).After that i am getting the Vertical ScrollBar.
The problem is when a table has many columns, Vertical and Horizontal Scrolls are coming at the time of setting the table. The table height is not Increasing dynamically.
How can i use "height" property in CSS? (I want the table height to be increased when the columns are more.)
Thanks & Regards
Madhavi

Hey humble user. Errr I'm trying to understand what ur trying to do. U want to create a section of a region destructively from an existing region right? If so select the option convert to new region (opt-comm-R or selecting it by right clicking). Check your audio bin to make sure. Whats the "merge" function? Are u refering to the glue tool?

Automatic creation of Notification using T-code IK11

Hi Gurus,
i got stuck in a requirement, where they want Automatic creation of notification using T-code IK11.
I am using EXIT IMRC0001.
Please guide me that with what logic i should go.
Thanks
Regards
VICKY
Moderator Message: Vague Question. Expecting others to do your work for you => Thread Locked.
Edited by: kishan P on May 12, 2011 12:35 PM

In the role give Authorization object P_ORIGIN for Infotype 0, 1 and 2. with Authorization level as R (read)
This will resolve your issue then no need to give sap_all authorization
Good Luck
- Ashish

Disable certain fields during the creation of SC using "create limit item"

Hi,
I have a requirement to disable certain fields from the role "SHOP" associated with the operational purchaser role. I would like to disable the fields "Unlimited check box", "Service Agent", " Invoice Only radio button", "Unknown account assignment radio button" from the screen I get during creation of SC using the option "Create Limit Item". Also i need to disable the option "Good / Service" entry box as we are using only free text items and donu2019t want this option to be seen in the screen when using the operational purchaser role.
Please advise how can I achieve this.
Regards
GGL

Hi,
I have a same requirement to disable certain fields from the Shopping Cart Limit Item. I would like to disable the fields "Service Agent", "Unknown account assignment radio button" from the Detail screen. during creation of SC using the option Limit Item . Also i need to make default Value "Known" and "Invoice Only". But this is in SRM 7.0. Notes You have mentioned supports only Release 5.5, But I am in Release 7.0. Any idea?
I appreciate your help
Thanks,
Monica

Creation of customer using BAPI_CUSTOMER_CREATEFROMDATA1

Similar Messages

Maybe you are looking for