Creation of index takes longer than deletion ?

Hi,
i deleted index from the cube was very quick just 7 mins. and it took 7 hrs. to create it back.
why it took so long?
i know if there are more data then it might take longer but how come deletion was that quick ?
thanks,
KS

Hi,
we have split the cube and transfer old data to new cube. now I am trying to delete data from original one. selective deletion for each year is getting failed/ canceled with
following error message:
DBIF_DSQL2_OBJ_UNKNOWN
CX_SY_NATIVE_SQL_ERROR
Error analysis
    An exception occurred. This exception is dealt with in more detail below
    . The exception, which is assigned to the class 'CX_SY_NATIVE_SQL_ERROR', was
     neither
    caught nor passed along using a RAISING clause, in the procedure "DELETE"
     "(FORM)"
after getting error if i repeat the deletion batch job it works fine for 2nd time.
what would be the reason ? what are other option for deletion.
i tried it by each year
by deleting index first
then deactivate aggregate.
but still it happens.
any suggestions ?

Similar Messages

Power on MacBook Pro takes me to login screen. All user icons appear as normal. Once I enter password for myself (administrator) spinning takes longer than normal and doesn't log in but displays a no sign

Power on MacBook Pro takes me to login screen. All user icons appear as normal. Once I enter password for myself (administrator) spinning takes longer than normal and doesn't log in but displays a no sign (circle w line through it) when attempting to login from guest account it takes me to screen that says that the computer will restart to a safe safari system for the guest user. I waited for a longer time and the grey denim screen comes up. By the apple in left upper corner it said I think LSA? Then safari menu bar. The page it loads to us file:///System/Installation/CDIS/Mac%2005%20X%20Utilities.app/Contents/Resource s/English.iproj/GuestLoginInfirmation.html
Can someone HELP? I'm afraid I might do something wrong

What backups do you have?

My mac pro 13 takes longer than normal to start?

My mac pro 13 takes longer than normal to start. What do I need to do to speed up the start up process?

with "normal" are you comparing it to other MacBooks? or to your model in the past?
installing a SSD would increase the boot up time a lot if you don't have one already...
also check what apps you have set to automatically open on startup because some/a lot will slow the startup down

Importing mpgs takes longer than it should

Importing mpgs takes longer than it should. I import 2 hr mpgs on a 6core 32gig ram machine & it takes too long. cs5.52

Wow. Sounds like a nice machine Steve. How long does a 2hr mpg take to import?
I just tested it out, and for me it takes about 5 min. ...which, in my opinion, is still too long, and should take no longer than it does to import something into PPro.
I understand your frustration there.
I think I mentioned before that Encore uses mp2 DVD files best. If you import things as mp2 or the DVD m2v file format, there is virtually no import time, and you do not have to transcode everything.
That said, unless there are things going on under the hood that I don't know/understand, I still agree that importing video files to timelines in Encore should take no longer than importing into Premiere. We don't need Encore to author or transcode until we're ready to export.

Since upgrading to OS 8.0.2 my ipad2 freezes, slows down, safari takes forever to open, the celluar network goes to No Service and the only way to fix it is to reboot it and this takes longer than before. Has Microsoft taken over Apple software?

SInce upgrading to OS 8.0.2 my ipad 2 freezes, slows down, safari takes forever to open pages, cellular network goes to No Service requiring a reboot (and this takes longer than before), in summary, I now have a fancy paperweight, i used to love my ipad. I feel as if Microsoft has taken charge of the Apple Software Division.

Sorry if someone sees this post in a different thread; Just want to get some additional exposure.. Who knows, maybe someone from Apple will take note..
The glitchy, unresponsive, slow and outright crashes are something you would expect in a less superior product. I paid what I consider a premium because of the perceived integrity of the company and quality of their products. I am not going to go as far to say Apple ***** and so do their products; but they have to to a better job of acknowledging problems and providing recourse. Right now, it "feels" like they don't care about existing customers. I am not sure of the exact #'s, but I believe products like the Ipad2 represent a significant population of their existing Ipad product base.
So what is my specific rant; If Apple is going to take a long time, or worst, NOT fix the problems introduced in IOS 8 for IPAD 2, give us the option of going back to IOS 7. I would say most everyone was extremely happy with their product running under that OS and would migrate back in a heartbeat. By blocking this option, it feels like Apple is saying that the only recourse is to live with crappy performance, wait forever without any real news, or throw away your Ipad 2 and buy a newer model. Right now this is 100% completely unacceptable, and I, as will thousands of others, will watch how this unfolds when we do buy new products. Most technology products only have short, finite lifespan and I would think it is at very least very important to Apple to retain customer base in a highly competitive marketplace. I'm done...

Recently switched from powermac to mac pro5 2x2.66GHz 6 -core xeon running FCP 7 on OS 10.6.8 exporting qt files and rendering project files now takes longer than my old machine looking at activity mon and % of user is aroun 6 and % of idle around 42

recently switched from powermac to mac pro5 2x2.66GHz 6 -core xeon running FCP 7 on OS 10.6.8 exporting qt files and rendering project files now takes longer than my old machine looking at activity mon and % of user is aroun 6 and % of idle around 42 are all the cores being used with FCP7?

johnnyapplesod wrote:
exporting qt files and rendering project files now takes longer than my old machine
It's because the PowerMac G5 had HUGE bandwidth with a fat BUS on each processsor so they could run hard, hot and heavy.
It's not so with the Intel processors which are multi-core and share a common bus thus bottleneck.
The newer Intel processors can do more work on the CPU, but when it comes to in/out they are s-l-o-w.
I've had a wickedly fast dual processor (not dual core) G5, RAID 0 pair of 10,000 RPM drives as boot and a fast video card, I could do a lot very very fast.
You'll likely have to upgrade to Final Cut X to get more cores utilized, prepare to cry a little bit, Apple is working on the features they stripped out of it to make amends to pro users who complained loudly. (all over TV too)
http://www.loopinsight.com/2011/09/20/apple-releases-major-update-to-final-cut-p ro-x-release-demo-version/

Locking entities takes longer than consolidation

Why would locking/unlocking our entity tree take longer than a consolidation?
HFM 11.1.2.1

There really isn't anything you can do about it from an application perspective. Make sure when you lock that no other processes are taking place so you're not competing for CPU and RAM with a currently running data load or consolidation. Make sure you have good hardware both on the HFM app server and the database server (I'll avoid a rant here about poorly configured virtual environments...). From a process perspective, try to design a process where users responsible for the base entities lock their own entities so you're never exposed to locking all of them yourself.
Some customers are very happy to use third party utilities such as Amosca's EPM Maestro to automate this, among other tasks. It won't speed up the actual lock, but it will make it easier for you to get the work done.
--Chris

Password Reset Emails take longer than 6 hours to arrive, expired once they finally show up

HelloI have searched the boards and found instances of people with the same problem, but no solutions. I have been going back and forth with skype support, but all they send me are canned responses with the same useless instructions over and over..... and despite my requests to read and actually reply, or to elevate my questions to a supervisor, all I get are canned responses over and over again. The bottom line is my wife forgot her skype password, we attempt to request a password reset token be sent, said token takes longer than the 6 hours validity period to arrive and is useless by the time we get it, then we are prompted to enter her email for another reset token, which takes more than 6 hours to arrive, completing this ridiculous circle... Advise, ideas, help are all greatly appreciated Thanks

Bad news.I spent the last 4 days going back and forth due to the same issue. The email arrives after 3 hours (should we consider an improvement?) but at the time I check the email, the token is expired so I need to re-initiate the process. Very annoying and not up to today's industry standards for password recovery. Even banks take 10 minutes the most... Bottom line, Skype says this is an issue they recently expereienced. Based on the previous post, the term RECENTLY is very vague.

Apps take longer than 15 seconds to get deleted

I got my iPhone 4s last September amd since then I've updated the firmware twice hoping that would solve the problem but it didn't so please tell me what else i can do:
When i hold an app to delete it, it does start to wriggle immediatly but when i press the delete button it takes more than 15 seconds for the are you sure message to pop up. I don't normally delete apps so i keep forgetting that that bug is there but when i do delete apps its when i urgently need space to take a video or something so its really frustrating when it takes me over ten minutes to just delete a couple of apps and yes it doesn't happen for just one delete it happens for each delete. Ever since i upgraded to 5.1.1 the freeze time decreased a bit to 15-30 seconds it used to be longer but i could really use a permenant fix for this. I searched around a bit and didn't see that anyone else had complained of this problem so i dont know what to try and i really need someone to tell me how to fix it. Thanks!

It is also possible the the disk space is low. How much space do you have left on your phone?

Pdf upload to sharepoint takes longer than ppt

Hi,
while uploading file to document libaray->pdf files takes longer time than ppt.
Please help why it is?any suggestions.
Thanks In Advance.

Hi,
While uploading file to document library, the file type doesn’t affect the time to upload the document to SharePoint.
Some other reasons will affect the time to upload the document to SharePoint, such as the size of document , the network speed and the performance of the Server when uploading the document.
Please check the conditions above.
Best Regards,
Dennis Guo
TechNet Community Support

Infopackage takes longer than usual

Hi
I've got an Infopackage that normally loads at 7 mins long.
But intermittently (e.g. once a week), the loading will take more than
1 hour.
May I know what is the possible cause for such problems?
Rgds
Rusyinni

1. Limit the amount of created data packages for each load between 1000 -1500 as described in below mentioned SAP OSS note:
892513 - Consulting: Performance: Loading data, no of pkg, req size
Note: 1000-1500 = sum of data packages over all data targets, i.e. with three targets 350-500 packages
How to limit the amount of data packages for the delta load:
Go to transaction RSA1 select your dedicated infopackage -- menue-- DataS. Default Data transfer --enter the max. nummber of data packages to be created for each delta load.
2. Global level :Use Transaction RSCUSTV6 for changing configuration setting for all the infopackages globally :
(i).Frequency with which status Idocs are sent : It means how many data-IDocs are described by one Info-IDoc.In simple terms after how many data idocs 1 info idocs to be sent .The larger the packet size for a data IDoc, the smaller you should set the frequency. By doing this, you make it possible to get information on the respective data load status in relatively short time periods when uploading data.You should choose a frequency between 5 and 10 but not greater than 20.
(ii)Datapacket size (Number of Data Records per Package) The basic setting should be between 5000 and 20000 depending on how many data records you want to load
.Recommendation :You should not divide up the quantity of data into too large a number of packets since this reduces performance when uploading. The number of data packets should not be more than 100 per loading process.
(III) ROIDOCPRMS : In order to make the RSCUSTV6 settings work you also need to do the related setting in ROIDOCPRMS in source system .
3. Increase the parallelization of the infopackage if possible
Got to transaction SBIW  increase the amount of wp which can be used.
Please read also OSS note:
595251 - Performance of data mart: Deactivating tRFC sending in BW
4.. Our Infopackage consists of 3 type of message types RSINFO , RSREQ , RSSEND etc. There is a standard program RSEOUT00 in the source system that is used to pushed IDOCS to OS layer .Therefore create variants for the above message type for this program in the source system .Also create some Background job for this to be run after every 30 minutes .You should not increase the frequency more than this .
Hope this helps .

Why do emails on my Macbook Air take longer than they do to appear on the server site?

When I send or receive an email by clicking on the email icon at the bottom of the screen, it often takes longer to be sent or be received than if I go directly into the internet email site where it appears immediately. At times, some people to whom I have sent emails do not receive them until hours later and conversely, incoming emails appear on the internet email site soon than they appear on my computer. Can this be remedied?

Do you use Navionics for marine a marine chart plotter? I noticed that after I installed all their (lousy) software on my MPB, this Navservice app would start up each time I booted. It took me a while, but I tracked it down to the "LaunchAgents" folder in my system library. Siince I quit the app each and every time I boot my MBP, I decided I didn't need it so I simply renamed the file from "com.apple.NavService.plist" to "com.apple.NavService.plist.old" and rebooted my MBP. Voila, no more NavService app running in the background.
As far as the purpose of this thing, the plist entry is launching the following app:
/Applications/Navionics World/NavService.app/Contents/MacOS/NavService
Take a look and see if you have the same thing.
The Navionics software for the Mac is obviously written by someone that doesnt' understand how Macs really work, and they scattered junk all over the place with their install routines. In fact, if you update the software it will place redundant copies in redundant folders, etc. making it impossible to know which versions are the latest, etc.

NewMacPro 4cor. Seems to take longer than I expected to boot up. This normal?

I just got my new MacPro 4 core with 512GB SSD and 16GB RAM. D300 GPUs.
I have noticed that when I start it up i have a white screen for longer than I had expected befor the user login screen appears.
Anyone else seen this? Running Mavericks 9.2. I have not loaded the latest security update as I have heard it can be a bit problematic.
How long does your nMacPro take from power on to login screen?

Disconnect all your perhipherals and start looking there for an issue.
Do a SAFE BOOT once, then restart, then do a restart again. What is it now?
Go into Recovery Mode and repair disk at two points, the top raw drive level, and the Mac OS volume partition both.
Do you have Windows Boot Camp or something else on the drive as well?
Longer is not going to help as can be seen. But let's assume longer means some time frame of more than 15 seconds? and you went to control panel to select default partition after insure with Repair Disk and Safe Boot it is in good working order, and nothing is attached affecting booting.
Did it do it on day one? when did it change? what was done in that time?

Premiere CC 2014 exporting H264 takes longer than Premiere CC ..?

Hi,
I did some tests with exporting a Apple prores HQ clip of 1 minute with the standard H264 Youtube 1080p setting.
And the results are a bit worrying.
Direct export in Adobe Premiere Pro CC = 1 minute 28 seconds
Direct export in Adobe Premiere Pro CC 2014 = 2 minute 16 seconds
And that's for a clip of one minute ...
I use a
MacBook Pro
Retina, 15-inch, Late 2013
Processor 2,6 GHz Intel Core i7
Memory 16 GB 1600 MHz DDR3
Graphics NVIDIA GeForce GT 750M 2048 MB
Running OSX 10.9.4
CUDA Driver Version: 6.0.51
And on my Mac Pro of early 2008, CC2014 exports slower
Direct export Premiere Pro CC = 2:23
Direct export Premiere Pro CC 2014 = 3:38
In the activity Monitor I see that 'Adobe QT32 server is not responding". Maybe that's got something to do with it?
I have already tried to delete the quicktime components from the library and i have done a clean install of Premiere Pro CC 2014 (terrible name btw).
Anyone any suggestions? :s
Jochem

To add to my quest:
Adobe QT32 server runs fine with After Effects CC 2014. When I export the same footage with AE to H264 it takes 1:28 . So maybe I should use after effects for encoding...
When I send the AE comp to Queue in Media Encoder it takes 3 min 32 to render is. That is in Media Encoder CC because Media Encoder CC 2014 can't open the composition ("comp is empty")
when I put the pores clip directly in AME CC and AME CC2014 it's 1:24 vs 2:16 .
the new version takes almost a minute longer to render a 1 minute clip...

Rendering portrait format takes longer than landscape format

Hi,
If I browse thru my RAW files from Nikon D2x, it takes much longer to render the in portrait format taken photos than the in landscape format taken photos.
Does anybody see the same effect?
JO

No problem in newer versions.

Creation of index takes longer than deletion ?

Similar Messages

Maybe you are looking for