Creation of Multiple Shipments with respect to Single inbound.
Hi,
This is regarding creation of Multiple Shipments with respect to Single inbound.
In standard SAP, you can create Shipment cost based on Inbound number.Requirement is here for single inbound can we create multiple Shipment document.
Can we do shipment costing for Multiple shipment in single document through VI01.
Yours Help in this will be highly appreciated.
Regards
Sunami.
dear friend,
to process shipment cost documents you can either call up a shipment cost document in change mode or you can create lists of the shipment cost documents
you can create the following lists:
-Shipment cost documents for calculation
-Shipment cost documents for settlement
to process a single document use t-code VI01
to create lists of shipment cost documents to be changed use t-code VI11
so, if you need something very special you would think about the new enhancement...
good luck!
Similar Messages
-
Single Maintenance plan creation for multiple equipemnts with different cyc
Dear Experts,
I had a following scenario to map in PM module. can anybody guide me to map this process?
we had no.of equipments under one functional location and will go through preventive maintenance on yearly basis. For this, i will create the single cycle yearly maintenance plan which comprices of maintenance items, which is fine. out of these equipments some of the equipments will go for routine maintenance like quarterly, half-yearly, tri-quarterly. user want to club these scenarios also in single preventive maintenance plan. when we scdule this plan, system has to deliver monthly orders and as well as yearly orders from single preventive maintenance plan.
Thanks & Regards,
KrishnaHi Krishna Murthy,
It can be acheived in the following Manner.
Create a Strategy say "Test" with Packages 1M, 2M,Q,H,Y packages.
Create 5(say) Equipment Task Lista for each of the 5 Equipment at that FL.
1st Task List will have Operations related to say Monthly(1M), Quartely(Q), yearly (Y)
2nd Task List will have Operations related to say Monthly(1M), Quartely(H), yearly (Y)
And so on... as per Business Requirement.
Now create a Maintenance Plan with 5 maintenance Items with respective Task Lits.
Now Schedule the Plan and give the Last Completion date as the Yearly package (A date one year less than the day you wanetd the yearly plan).
Then check the calls.
Regards
MLN Prasad -
HANA XSODATA Create multiple entities with associations in single LUW
Hi all,
Is it possible to create multiple entities with associations in a single LUW.
For e.g. we have a Sales Order and Item. This is modelled as 2 DB tables and 2 entities.
In XSOData I have defined association relationship between them.My XSOData definition is like this...
"XSDemo.DB::SO" as "SalesOrder"
navigates ("SalesOrder_OrderItem" as "SOItem");
"XSDemo.DB::ITEM" as "OrderItem";
association "SalesOrder_OrderItem" principal "SalesOrder"("OrderID") multiplicity "1"
dependent "OrderItem"("OrderID") multiplicity "*";
My post URI is
http://server:port/SODemo.xsodata/SalesOrder
My data is as follows
"ID": 1,
"Customer": 123,
"Desc": "Test SO",
"SOItem": [
"Material": "MAT1",
"Qty": "10",
"Item": "10"
"Material": "MAT2",
"Qty": "20",
"Item": "5"
From the post, I get a response 201 (Created). However, only the Sales Order is created. The Items are not created.
My question is:
1. Is it possible to create Order and Item together in a single post call ?? If yes, how. What is the syntax of XSOData / Post Request
2. If it is not possible to create Order and Item together in a single post call, then how do we ensure atomicity of the transaction.
For e.g. What is Order creation is success and then the Item creation fails ...
How can we ensure that all is committed or none is committed.
3. From the documentation I understand that this might be possible using modification exits... However, I want to achieve this without using modification exits...
Is this possible or not ?Hi Thomas,
Actually the problem is that Sales Order and Order Items are modeled as different entities... So, XSOData allows creation of Sales Order Item independently WITHOUT creation of a sales order header.
For e.g. URL : http://server:port/SODemo.xsodata/OrderItem
Ideally, the XSOData should implement a logic that a Dependent entity cannot be created without a Principal entity.
For e.g. using a Sales order BAPI you cannot create a sales order item alone !
Similarily, since XSOData is the end point service for the consumer, the XSOData should have the logic to ensure that both principal and dependent entities are created together.
Otherwise, in the UI the developer has to ensure that the post body is build correctly... -
Creation of Outbound delivery with respect to sales order
Hi Gurus,
I am an Abaper.
I have a requirement to create outbound delivery with respect to sales order.
Currently I have the purchase order details.
My coordinator has given me a logic.
From the Purchase order, we have to get the Purchase requisition.
From Purchase requisition, we have to get the sales order.
From the sales order, we have to create the outbound delivery.
Please explain me how to creaet the outbound delivery with respect to sales order.
Also, how to get the PR from PO and SO from PR.
Thanks in advance.
Regards,
Balaji. RHi balaji,
I will add the abap code since you are a ABAPER.
1. To get the Pur. Req. from PO
Note that PO_NO and PO_LINE_ITEM are variables.
Select VEBLN VBELP into (EBKN-VBELN,EBKN-VBELP)
from EKPO inner join EBKN on EKPOBANFN = EBKNBANFN
where EKPOEBELN = PO_NO and EKPOEBELP = PO_LINE_ITEM
2. And using VL01N you can create the relevant outbound delivery. Use above sales order for this. And record a BDC and write the code.
Hope this will useful
Thanks & BR
sandun -
Creation of multiple PR with using BADI BBP_SC_TRANSFER_BE
Hi,
I have implemented the BADI BBP_SC_TRANSFER_BE.
I want to create multiple PR with criteria in using method GROUP_RQ.
But I don't understand what are the parameters use to create several PR.
Dear,
JulienIn standard, 1 PR is created with severals items.
Here, I want to create 1 or 2 or 3 ... PR according to differents criterias.
And I don't understand how to use the BADI BBP_SC_TRANSFER_BE and method GROUP_RQ to separate differents items into differents PR.
BR,
Julien. -
Multiple po's into one single inbound delivery
Hi Experts,
How to create the Multiple purchase order line items (Ex; In one po i am selecting only 2 line items and one more po i am select 3 line items) into one single inbound delivery for this where is the settings .
please guide me any one.
Thanks,
KKDeshpande i have the same problem.
I tired giving all the PO for a collective inbound delivery in VL34, but it still creates one delivey for every PO item
Anand: did u manage to solve ur issue
Regards
Sumanth -
Chart creation using multiple series with same name
I'm new to Numbers and to chart creation in general, so I'm not sure if Numbers is capable of what I need. But if so, I'd like to know how...
I have a large spreadsheet with hundreds of lines of expense data, wherein each line item falls into one of a dozen categories of expense types. I would like to create a pie chart by expense type (ie, Healthcare, Automotive, Travel, etc), but Numbers wants to treat each line item as a separate expense, even though many of them share the same name. So I'm getting multiple pie slices that all say "Travel" and so forth. I really just want one pie slice for Travel, one for Auto, etc.
So how can I make Numbers calculate the subtotals for each expense type and use those subtotals to create the chart? Is there a way to do this within the chart function or do I need to create a separate table for just the subtotals (not sure how to do that either) or what?
Thanks!It appears that I missed your question.
Here is a way to treat the problem:
In Tableau 2 column B the formula is:
=SUMIF(Tableau 1 :: B,A,Tableau 1 :: C)
The column A of Tableau 2 is a header.
Yvan KOENIG (from FRANCE lundi 14 avril 2008 14:26:37) -
Multiple Audio with in a single Time Line
I understand that a single time line can contain multiple audios (dubbed voices, foreign languages, director's commentary, etc). And when I do this, I can hit the "Audio" button on my DVD remote and the audio will change seemlessly while viewing the movie. This is desirable because you don't have to render several time lines of the same video. I'm trying to achieve this very thing - in order to reserve as much space on my DVD/Blu-Ray for the feature presentation. Here's my actual question.
Now that I have this single timeline with 2 audios, I want my menu buttons to interact with these different audios. I want my "PLAY FEATURE" button on the main menu to play my main time line with audio #1. Then I want my "DIRECTOR'S COMMENTARY" button in the Bonus Menu to play the same time line, but with audio #2 this time. Is there a way to make Encore do this?
I was hoping there was a way to "group" that time line with the 2 audios in that they each create their own asset in the project panel (and can be linked via pick-whip), but each asset uses the same main timeline, just different audio.
I really hope I haven't written this to be more confusing than it is. I also hope you're the right guy to answer my question, and if not - can you pass me along to someone who can? I appreciate your time and thanks for reading my long-winded question.
I'm using Windows 7 and Encore 5.1Start here re how to handle navigation with audio tracks.
http://help.adobe.com/en_US/encore/cs/using/WSbaf9cd7d26a2eabfe807401038582db29-7e8ca.html
I was hoping there was a way to "group" that time line with the 2 audios in that they each create their own asset in the project panel (and can be linked via pick-whip), but each asset uses the same main timeline, just different audio.
I'm not sure what your question is there, and this may be clearer to you in reading the above section of help. But the timeline (with the video asset) must have both audior tracks, or there is no savings in creating two timelines, for each audio, but each then also requiring instances of the video. -
Creation of Multiple billing documents from a Single sales order
Hi Experts,
How can we create many billing documents from a Single sales order.
Will it be possible we create a Sales order with bigger quantity and then keep on creating partial billing documents based on the billing quantities and dates.
Request you all for a solution.
Thanks
MonteeHi ,
1. If Qty is one number - based on value of the order - it is possible to create different billing doc.'s based on billing date and value using billing plan , again these are periodic billing or milestone billing
2. Using Contract process- create material /qty contract- release partial qty by creating release document and create billing document w.r.t to contract or release document (sales order)
thanks
Chidambaram -
Need to load multiple skins with only a single .swf and config.xml
Hello
These are part of some instructions that were of a AS3 Mp3 Store I purcased
Well guys the new AS3 flash cart system can have skins hot swapped in and out with out having to recompile the actionscript code.
You can even have multiple skins on the same cart and use different ones in different places of your website.
This is all because the flash cart system itself runs seperate from the graphical user interface that the customer visits.
When you purchase a new cart skin, or if you edit your own custom skin, you can place the swf file for it in the "skins" directory of your flash cart installation directory. Then in the config file where you "embed" the cart on your website you include the name of the skin you'd like to use (the skin MUST be available in your skins directory).
The other plus to using the skin system is you can keep the cart application seperate from your site. No longer do you have to have all that ugly php code and cramped swf files floating along side your website html files. No instead you create an install directory then simply embed the cart from where ever it is. The only litigation is that the cart must exist on the same server as the website you are showing it publicly on.
So right now I have a website with the store set up and working, allowing the buyer to listen to the tracks, add to cart and checkout after which they are given an instant download link to the purcased files.
What I want to do now though is break up the songs into differents carts/skins within a dropdown list in my website as quoted in the instructions above, according to genre.
So I have published 4 different skins as
MusicSkin 1.fla
MusicSkin 2.fla
MusicSkin 3.fla
MusicSkin 4.fla
and have placed these on my server
The cart works by Index.html > loads the Main.swf >loads MusicSkin.fla which is called by via config.xml
(<?xml version="1.0"?>
-<config><skin src="MusicSkin"/><db src="/" sandbox="false" type="sql"/></config>
I am having trouble configuring how to call on 4 different Skins into different pages on my site if I only have ONE index.html, Main.swc and config.xml files which according to the instructions is possible!
Hope this makes sense, I get how it works on one skin but not how it works/or to make it work with multple ones on a website.Is this possible...anyone!!!!!!!!!!!!!!!!
Really hoping to getting this working soon.
I am wondering if i have to copy the instances of the different skins into the config file above and each swf and html file loads the corresponding on in the list, or does each instance require it's own config file, which would then be a problem I think, because I could not have 4 config.xml files in the same directory which is what the Action Script is calling on. -
Creation of multiple listeners with public IP
Hi,
ORACLE VERSION : 10.2.0.1
Operation system : LINUX
Here i need to configure a listener for the database with different ip with different port no.when i create another listener i am getting this error.And i want the database must connect with both the IP's which i mentioned in the listener.ora file
Here is my listener.ora file
# listener.ora Network Configuration File: /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /u01/app/oracle/product/10.2.0/db_1)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = TCP)(HOST = vtl3199db)(PORT = 1521))
LISTENER_PUB =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = TCP)(HOST = 122.183.83.130)(PORT = 1522))
SID_LIST_LISTENER_PUB =
(SID_LIST =
(SID_DESC =
(SID_NAME = CAPTURE)
(ORACLE_HOME = /u01/app/oracle/product/10.2.0/db_1)
(PROGRAM = extproc)
)and the error what i am getting is
[oracle@vtl3199db admin]$ lsnrctl status LIS_PUB
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 19-OCT-2010 05:11:37
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 10.2.0.1.0 - Production
Start Date 19-OCT-2010 04:52:47
Uptime 0 days 0 hr. 18 min. 49 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=vtl3199db)(PORT=1521)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "capture" has 1 instance(s).
Instance "capture", status READY, has 1 handler(s) for this service...
Service "captureXDB" has 1 instance(s).
Instance "capture", status READY, has 1 handler(s) for this service...
Service "capture_XPT" has 1 instance(s).
Instance "capture", status READY, has 1 handler(s) for this service...
The command completed successfully
[oracle@vtl3199db admin]$ lsnrctl services LIS_PUB
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 19-OCT-2010 05:11:52
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
Service "capture" has 1 instance(s).
Instance "capture", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:4 refused:0 state:ready
LOCAL SERVER
Service "captureXDB" has 1 instance(s).
Instance "capture", status READY, has 1 handler(s) for this service...
Handler(s):
"D000" established:0 refused:0 current:0 max:1022 state:ready
DISPATCHER <machine: vtl3199db, pid: 2989>
(ADDRESS=(PROTOCOL=tcp)(HOST=vtl3199db)(PORT=32773))
Service "capture_XPT" has 1 instance(s).
Instance "capture", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:4 refused:0 state:ready
LOCAL SERVER
The command completed successfully
[oracle@vtl3199db admin]$ lsnrctl stop LIS_PUB
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 19-OCT-2010 05:12:00
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
The command completed successfully
[oracle@vtl3199db admin]$ lsnrctl services
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 19-OCT-2010 05:12:13
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
Linux Error: 2: No such file or directory
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=vtl3199db)(PORT=1521)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
Linux Error: 111: Connection refused
[oracle@vtl3199db admin]$ lsnrctl start LIS_PUB
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 19-OCT-2010 05:12:18
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting /u01/app/oracle/product/10.2.0/db_1/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 10.2.0.1.0 - Production
System parameter file is /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
Log messages written to /u01/app/oracle/product/10.2.0/db_1/network/log/lis_pub.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
Error listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=122.183.83.130)(PORT=1522)))
TNS-12545: Connect failed because target host or object does not exist
TNS-12560: TNS:protocol adapter error
TNS-00515: Connect failed because target host or object does not exist
Linux Error: 99: Cannot assign requested address
Listener failed to start. See the error message(s) above...
[oracle@vtl3199db admin]$ lsnrctl start
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 19-OCT-2010 05:12:24
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting /u01/app/oracle/product/10.2.0/db_1/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 10.2.0.1.0 - Production
System parameter file is /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
Log messages written to /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=vtl3199db)(PORT=1521)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 10.2.0.1.0 - Production
Start Date 19-OCT-2010 05:12:24
Uptime 0 days 0 hr. 0 min. 0 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=vtl3199db)(PORT=1521)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
[oracle@vtl3199db admin]$ lsnrctl status
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 19-OCT-2010 06:31:57
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 10.2.0.1.0 - Production
Start Date 19-OCT-2010 05:12:24
Uptime 0 days 1 hr. 19 min. 32 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=vtl3199db)(PORT=1521)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "capture" has 1 instance(s).
Instance "capture", status READY, has 1 handler(s) for this service...
Service "captureXDB" has 1 instance(s).
Instance "capture", status READY, has 1 handler(s) for this service...
Service "capture_XPT" has 1 instance(s).
Instance "capture", status READY, has 1 handler(s) for this service...
The command completed successfully
[oracle@vtl3199db admin]$ lsnrctl status LIS_PUB
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 19-OCT-2010 06:32:06
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 10.2.0.1.0 - Production
Start Date 19-OCT-2010 05:12:24
Uptime 0 days 1 hr. 19 min. 42 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=vtl3199db)(PORT=1521)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "capture" has 1 instance(s).
Instance "capture", status READY, has 1 handler(s) for this service...
Service "captureXDB" has 1 instance(s).
Instance "capture", status READY, has 1 handler(s) for this service...
Service "capture_XPT" has 1 instance(s).
Instance "capture", status READY, has 1 handler(s) for this service...
The command completed successfully
[oracle@vtl3199db admin]$ lsnrctl status
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 19-OCT-2010 06:32:27
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 10.2.0.1.0 - Production
Start Date 19-OCT-2010 05:12:24
Uptime 0 days 1 hr. 20 min. 3 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=vtl3199db)(PORT=1521)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "capture" has 1 instance(s).
Instance "capture", status READY, has 1 handler(s) for this service...
Service "captureXDB" has 1 instance(s).
Instance "capture", status READY, has 1 handler(s) for this service...
Service "capture_XPT" has 1 instance(s).
Instance "capture", status READY, has 1 handler(s) for this service...
The command completed successfullyNOte: Here 122.183.83.130 is public ip for vtl3199 ip where my database is running on the server.
Kindly help me how to configure the listener with public ip to connect to client .
Thanks & Regards,
Poorna Prasad.Hi,
Here when i am trying to start the listener with LISTENER_PRB i am getting error which is shown below.when i am trying to stop the listener with lsnrctl stop LISTENER_PUB the default listener LISTENER is stopping .Here my doubt is it must throw error when we are stopping the listener LISTENER_PUB.
[oracle@vtl3199db admin]$ lsnrctl start LISTENER_PUB
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 20-OCT-2010 01:33:40
Copyright (c) 1991, 2005, Oracle. All rights reserved.
TNS-01106: Listener using listener name LISTENER has already been started
[oracle@vtl3199db admin]$ lsnrctl stop LISTENER_PUB
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 20-OCT-2010 01:36:05
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
The command completed successfully
[oracle@vtl3199db admin]$ lsnrctl start LISTENER_PUB
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 20-OCT-2010 01:36:31
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting /u01/app/oracle/product/10.2.0/db_1/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 10.2.0.1.0 - Production
System parameter file is /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
Log messages written to /u01/app/oracle/product/10.2.0/db_1/network/log/listener_pub.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
Error listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=122.183.83.130)(PORT=1522)))
TNS-12545: Connect failed because target host or object does not exist
TNS-12560: TNS:protocol adapter error
TNS-00515: Connect failed because target host or object does not exist
Linux Error: 99: Cannot assign requested address
Listener failed to start. See the error message(s) above...
[oracle@vtl3199db admin]$ lsnrctl start
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 20-OCT-2010 01:36:37
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting /u01/app/oracle/product/10.2.0/db_1/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 10.2.0.1.0 - Production
System parameter file is /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
Log messages written to /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=vtl3199db)(PORT=1521)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 10.2.0.1.0 - Production
Start Date 20-OCT-2010 01:36:37
Uptime 0 days 0 hr. 0 min. 0 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=vtl3199db)(PORT=1521)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfullyRegards,
Poorna Prasad. -
Creation of Multiple position with LSMW in sap om
Hi friends,
I have to create 300 position for org. unit using LSMW.
please help me out.
Best Regards:
PriyaranjanHi
Go with T-code- PP02
while recording the PP02
Initial screen-
01 Current plan
S Position
"Blank"
1000 Object
"Blank" subtype
1 Active
01.04.2011 to 31.12.9999
in the next screen you have to assign relationship A 003 Belongs to
for remaining relationship's you have to create another LSMW.
check this stepwise doc by our friend Jazib.
LSMW:Upload Master Data Using Batch Input Recording Part 1
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e04f8fc8-2ef3-2d10-dc8d-eb6fd0711157?QuickLink=index&… -
Multiple shipment agaisnt single delivery
Hi Gurus,
Can we have multiple shipment documents against a single delivery. If yes what are the instances where we can have this scenario. i.e. what we need to do in the config and also which process business need to follow to satishfy this scenario.
Thanks.
Laxmi.Hi Laxmikanta,
Yes we can do multiple shipment for single delivery please follow the below steps.
1) Once you create a delivery go to t-code VT01N
2) Create the first shipment as you generally do.
3) If you want to create another shipment then you need to change the shipment type and create subsquent shipment.
4) You can create as many subsequent shipment as you want.
5) For this you need to remove the check mark from the delivery status " Do not select deleveries already in subsequent legs"
Once done you will be able to create as many shipments as possible.
Hope this helps.
Thanks and Regards
Rohit. -
Vendor invoie for multiple POs with different payment terms
Hi,
We have a vendor which send a single invoice for multiple POs which have different payment terms. Now if we create a single invoice in MIRO, then only a payment term can be applied.
However user want to pay to the vendor corresponding to the PO terms.
Please let us know any way apart from creating multiple MIRO documents.
Regds,
NandHi,
You can achieve so in standard SAP.
Go to OBY6 and activate the check box "Enable Amount Split" in your company code. Then in MIRO, a new tab will appear in the header as "Amount Split"
In this tab, you can split the vendor invoice in multiple lines with respective payment method and payment term.
I hope this will help you.
Regards,
Gaurav -
Inspection lot before GR with respect to Purchase Order
Dear Friends,
Here is my Question
If i use inspection type 01 ,Normally there is a inspection lot creation while doing GR with respect to PO
but my Question is
we need two inspection lot one is before GR and another is after GR , is there any settings or solution for this
Thanks in advanace
Regards
RajHi Raj
you can create inspection lot before GR by using inspection type 0101
normally this inspection type is used for source inspection
assign this inspection type 0101 to that material , create quality inforecord for material and vendor
assign inspection type 0101 in that inforecord, now when P.O gets generated in MM
you can generate inspection lot W.R.T that P.O through transaction code QI07
please revert back for any help reqd.
Thanks
Vinay
Maybe you are looking for
-
I think I have some Malware/Trojan Horse on MacBook Pro. How to get rid of it?
My MacBook Pro has worked perfect for the last 2 years, but over the last 2 days when I am on Chrome it has started clicking onto random websites when I click other links, and showing certain words as underlined and as hotlinks. I think I recognise t
-
How can I avoid a full scan when ...
Hello How can I avoid a full scan with I apply the aggregate function "MIN" SQL> select min(c1) from hh; MIN(C1) 1 Execution Plan 0 SELECT STATEMENT Optimizer=CHOOSE 1 0 SORT (AGGREGATE) 2 1 TABLE ACCESS (FULL) O
-
Pressing ^[ causes screen to pause redrawing the terminal, annoyingly
I've come across an annoying behavior in GNU Screen. It's most prominent in vim: when I enter insert or command-line mode and press ^[ (escape), nothing happens for about .75 seconds, then the 'INSERT' indicator (or prompt) disappears. However, if I
-
My daughter is using Safari 4.1.3 on a Mac Mini using OS 10.4.11. She gets the message that because of security issues with some websites, she must upgrade to a higher version of Safari. But all her software is up-to-date, or so the Software Update
-
HT3819 can you select the items you don't want your family to be able to see?
I want to get some of my dad's songs he has on his ipod without buying them so i was going to try using the home sharing but i dont want to share all of my songs. Before i turn home sharing on i would like to know if i can select the items i want and