Creation of new field in RFX screen and populating item details

Hi Experts,
I have to create a new button in "Create RFX " screen where it should procure the shopping cart details and it should populate in table in RFX screen.
Shopping cart number should be entered in this screen. Set up for this input field is already done.Now i added an button GO.This one should retrieve the shopping cart details of entered shopping cart number and populate in the table present in this screen.
Procedure
1.Procure shopping cart details by calling the function module "bbp_pd_sc_getdetail".
I am strucked after this.How to proceed further as i have tried different procedures.
Please help if any idea on this

thanks for reply
I have did same thing but in input parameter of bado i am getting the shoping cart GUID . form which how i can get the Bid detail.
and other part is I need to send data by extension this this how we can do ?
do we need to write code in backend also and need to create custom field in backend PO table.
Thaks for reply

Similar Messages

  • Process to add  new field to Account screen and update value from R/3...

    We have CRM 7 and just wanted to ask what the process would be to add a new field to the Accounts screen. This field will be a read-only field and we'll source its value from R/3, based on some of the other data entered into the Accounts screen.
    What exactly is involved in this process?.
    I think I can use the new Application Enhancement Tool instead of EEWB to create the new field, but how does one identify which structure/table to change for say the 'Accounts' data, and, where does one place the code which populates this field, and, once the structure has been changed how do I physically add the field to the screen. I should be okay with reaching out to R/3 and populating the data, code-wise, but again wondered if there was anything inbuilt to do this, bearing in mind the closeness and constant access to R/3 from CRM.
    Any help would be much appreciated.
    Jason
    Edited by: Jason Stratham on Apr 14, 2010 1:11 PM

    Jason,
    If you use EEWB or AET,, there is nothing manual you have to do, the fields will be added to all related tables and structures plus UI too.
    May be sometimes you have to run the UI configration tool to add the field to the UI, again this is just a tool, there is not manual coding required.
    you can enter the value for the fields direclty via UI, BUT if it is a display only field, at the time of save, you have to write couple of line to populate this field ( see set_property( ) method in the context node ).
    Thats it...
    Regards, Sudeep..

  • Creation of custom field on BId screen And send this data to backend in PO

    HI Expert,
    I have to add custom field on bid item data. I have did this and able to see this field on bids screen.
    the scenario is like once bid is accepted it will create PO in backend.
    now i need to carry the data from this custom field to backend PO.
    please give me the solution if it possible. we are using classic scenario.
    thanks in advance.

    thanks for reply
    I have did same thing but in input parameter of bado i am getting the shoping cart GUID . form which how i can get the Bid detail.
    and other part is I need to send data by extension this this how we can do ?
    do we need to write code in backend also and need to create custom field in backend PO table.
    Thaks for reply

  • Add new field in selection-screen and output dynamically

    hi gurus,
      i need to add field in selectio-screen.
    i need to validate the field with existing fields.
    i need to add this in alv grid output list dynamically.
    thanks & regards,
       kgn9.

    Hi
    Try to use EXIT_SAPMM07M_001, it's to update the item (not header) text, but you can try to use it:
    FIELD-SYMBOLS: <BKTXT> TYPE MKPF-BKTXT.
    ASSIGN ('(SAPMM07M)MKPF-BKTXT') TO <BKTXT>.
    IF SY-SUBRC = 0.
      <BKTXT> = <.....>.
    ENDIF.
    Max

  • Need to add a new field in Milestone screen

    Hi Gurus
    I have a request to add a new field in milestone screen. Milestone under WBS element and Milestone under network.
    Is there any Exit for the same ? can you tell me the different ways we can add a field in the screen
    - Pithan

    Hi,
    i did create a new milestone usage. There i have the option to put "billing Plan Type", "Date Category" and "Start/Finish". I did not see an option where i can add a custom field. I also checked the node for "Billing Plan Types"  and there also i saw only the standard screens / fields. Did i miss something here?
    Thanks
    Sreekanth

  • How to create a new Structure of Data screen and screen sequence

    Hi,
    Can you give any link or explain all the steps required to create a new structure of data screen and how to assign it to our comapnay code or plant etc.  also when i check the screen ref. which is assign to material type in OUR system i ROH but i have not found this ref. in OMT3B where i can see the screen ref. ROH as this the the standard.
    regards,
    zafar

    Hi
    Download the pdf's from the below link
    http://www.pdf-search-engine.com/sap-mm-configuration-pdf.html
    It will help
    Thanks,
    Raman

  • Auto Creation of new requisitions based on a list of items

    Auto Creation of new requisitions based on a list of items
    We are starting discussions to determine how we could auto-create requisitions based on a list of servers in order to perform periodic health checks. 
    One approach we thought about was creating one service request that could spawn multiple requests, again based on a list and using a set schedule (weekly, monthly, quarterly, yearly, etc.)
    Has anyone implemented this and can provide some guidance/tips?

    You can check this article for more references on how to use sp_helptext object_name stored procedure:
    http://blog.sqlauthority.com/2007/05/25/sql-server-stored-procedure-to-display-code-text-of-stored-procedure-trigger-view-or-object/
    I also suggest trying commercial tools to sync and compare the stored procedures between two databases. We used
    ApexSQL Diff, but I've also heard some good things about
    Devart's tools.

  • Adding new field (ie Goods Recievd date ) at item level in MIRO tcode.

    Hi Friends,
    I got on issue on screen exits.
    I have to add one more field in the transaction mir4 and that field is
       '  Good received Date '. So please explain me how to add this field in the screen and what is the process to do this one. i dont know about user exsit.
    So please help me for this issue and its very urgent....
    Thanks in Advance.....
    Anil.

    Hi
    Try the user exit
    LMR1M001  this contains a screen exit in which you can add an extra field at header level of MIRO.
    You can also try the BADI
    INVOICE_UPDATE
    reward points if useful
    regards
    Anji

  • Creation of new field in CRM activity screen

    Hi CRM Experts,
    I need some help regarding this issue.
    Now when executing the campaign in the CRM system the results are not showing the function code.
    We need the function code to visible when executing campaign.For this we need to add new field in CRM activity screen.
    And the function code values are stored in the BUT051 table and field name PAKFT and Data element BU_PAKFT.
    When we executinmg the campaign FUnction also should be there in the selection criteria.
    Please help me how to create new field and assign this function code in the search results.
    Please reply me ASAP.
    Thanks in Advance
    Regards,
    rahul

    Hi JC,
    The context node that you are using is a mixed node, so from this node you need to get value node so that you can cast the value into cl_bsp_wd_value_node.
    Here's the sample code for getter and setter method of that attribute:
    DATA:
       lr_mixed TYPE REF TO cl_bsp_wd_mixed_node,
       lr_value_node TYPE REF TO cl_bsp_wd_value_node.
    lr_mixed ?= current  or lr_mixed ?= iterator. " use either of the code i dont have system right now
    lr_value_node ?=  lr_mixed_node->if_bsp_wd_ext_property_access~get_value_node( ).
    Here, from lr_value_node get the property access method and set the attribute value to VALUE parameter.
    Thats it
    Thanks,
    Bhushan

  • Creation of new fields under sales tab in XD01

    Hello,
    I have to create a new field under the sales tab in XD01. Please let me know how i can do this? or is there any other way of adding the new fields to the customer master..
    Thank You!!!!
    Suresh

    Hi,
    you can add to fields with customizing a cross the below path:
    Financial accounting/accounts receivable and accounts payable/customer accounts/master data/define screen per activity (customers),
    but i dont know how add new fields,
    regards,
    David

  • Creation of New field in Relationship block of contact page

    Hi,
    I have created a new field as value attribute in Relationship block of contact overview page. Since both AET and EEWB did not allow creation of the field as part of BUT051 I had to create value atribute. I have custom logic for the field. Can you please let me know how I can populate the field.
    Thanks,
    JC

    Hi JC,
    The context node that you are using is a mixed node, so from this node you need to get value node so that you can cast the value into cl_bsp_wd_value_node.
    Here's the sample code for getter and setter method of that attribute:
    DATA:
       lr_mixed TYPE REF TO cl_bsp_wd_mixed_node,
       lr_value_node TYPE REF TO cl_bsp_wd_value_node.
    lr_mixed ?= current  or lr_mixed ?= iterator. " use either of the code i dont have system right now
    lr_value_node ?=  lr_mixed_node->if_bsp_wd_ext_property_access~get_value_node( ).
    Here, from lr_value_node get the property access method and set the attribute value to VALUE parameter.
    Thats it
    Thanks,
    Bhushan

  • Adding new field to MB51 screen output

    Hi All,
    I need to add a new field TCODE2 from MKPF table on the screen output of MB51. I have added my new field thro SPRO following the below steps:-
    Go to SPRO -- MM -- Inventory Management and Physical Inventory -- Reporting -- Define Field Selection for Material Document List
    Here I have give
    RM07DOCS MKPF TCODE2 Transaction code -- output box checked
    and saved.
    Now I  tried to re-execute the transaction MB51 but not able to see the Tcode2 on the output screen .
    Can any one help me out, if I am missing out something or is there any thing else i need to check on the ALV output to see the field TCODE2 on the screen og MB51?
    Regards
    Shilpa.

    Hi,
    Check these notes:
    Note 357187 - MB51: Fields in field catalog / selection screen
    Note 828104 - Enhancing MB51 for AFS
    I hope this helps you
    Regards
    Eduardo

  • Need to add new field in Rfx Line Item Page

    Hi
    I want to add an new extended field in RFX line item page ( Rfx-> line item tab -> click on the pencil icon of any line items )
    can anyone help me ?
    Regards
    Sudipta

    Thanks Vikram for your help
    I got the line in the foum ( referred by you )
    You have to create a customized line item collection from scratch and hide the original one; this is possible (import and export can be included with this but will take some effort and change the reports).
    can you please tell me how to create the customized line item collection ?
    Regards
    Sudipta

  • To add two new fields in CO09 SCREEN

    Hi All,
    I have a requirement of adding two new fields  Customer Name and Number (Sold to party) for the MRP Elements IN CO09 Screen which is already there in MD04.
    Please let me know as soon as possible if any one has any idea regarding this.

    Hi All,
    I have the same issue. Any solution already in sight?
    KR,
    Martin

  • Add a new field in va02,va03 and vf02 & data tran. in these fields VOFM

    Hi All,
    I have a requirement, I need to add a new field in the sales order header part and even a field in the billing document, once I add this field up in both the documents in the header part i need to create a copy routine using the VOFM transaction,
    Can any body help me on what's the procedure to add a field in billing document as i dont find any screen exit for doing it and does the copy routine transfer the data ( Custom Field ) from Sales Order to the Billing Document, if yes can somebody help me with the procedure on how to and code of it.
    Regards.

    Hi,
      The procedure to create the new VOFM.
    1. Go to VOFM transaction
    2. Page down until you find a new spot on the page to put in the VOFM number and description.
    3. Put in the VOFM number and the description of the VOFM.
    4. Now the VERY IMPORTANT part of the process. Double click on the VOFM description not the VOFM number to create this as a Development/Correction and not as a repair. If you double click on the number then this copies some existing code and prompts you for a repair.
    5. Activate and generate the VOFM routine. Note: Configuration must be setup by the OM team for this step.
    for example Go to the routine number that needs to be copied.
    Put your cursor on the routine number field that needs to be copied.
    Overwrite that number with your new routine number and hit enter.
    The new routine will be created as a copy of the old routine and you can modify the new routine as you need it.
    Ex.
    You have to copy routine 104 to 904
    Routine number Description Active
    104 Bill.bus.item data X
    Put your cursor on 104 and then change it to 904 and hit enter.
    904 will be created as a copy of 104 and you can make your changes in 904.
    Don't forget to activate it after you are done.
    refer the below link
    https://forums.sdn.sap.com/click.jspa?searchID=3604222&messageID=994791
    Regards

Maybe you are looking for