Creation of query using SQ00

Hi All,
As business users we don't have access to SE16 or SE16N and during month end we have to check the deleted POs for the particular month and report it back. Each time we have to go to support team who will extract this data for us and this takes 2-3 days unnecessarily.
Now I know we have to look in table EKPO, set date field between 01.08.2014 to 31.08.2014, and populate field LOEKZ = L to get the deleted POs for August month but I am unable to convert this into a SQ00 query. Can some of you experts help me with some kind of documentation or steps here to create the SQ00 query?
Best Regards,
Anup

Hi Anup ,
Method A
1) . create an infoset on EKPO table . Go to extras , in the code section go to record processing and there write the below mentioned code :
CHECK EKPO-LOEKZ = 'L'  .
2).  now create a query on this infoset .
Method B
1). create an infoset on EKPO table .
2). create a query on this infoset . Mark LOEKZ as selection screen field .
So now when you execute the query ,  on selection screen pass 'L' to LOEKZ field .

Similar Messages

  • Creation of query using ME13 transaction

    Hi All,
    I have created a query the details of the out put taken from ME13 transction. In ME13 transctions three tabels are used EINA, EINE , KONP  I have joined this tabels in infoset. For KONP and other two table4s system is showing no realtion so I have taken LFM1 for joing KONP with other two.
    I am not getting anuy output. Can someone help me on this whether the table join is correct  or any improvement in that is required
    Regards,
    Prashant

    Please define additional fields in the query.
    You can select a field1 from table1 after comparing field2 in table2 with field2 in table1 even though table1 and table2 cannot be joined
    For e.g. "select single mahna from mhnk into DUNNINGPROCEDURE where kunnr eq mhnd-kunnr."
    Please show this code code as example to your ABAP consultant, he should be able to help.

  • Creation of Query using Infoset

    Hi everyone i have a problem with assignment of user goups to infoset in writing a query for generating own report. first i created user group, next infoset and later while creating query when the user group is selected the infoset which i created and assigned to user group is not showing in dialog box. it's showing something else. i have checked all the assignments so far everything is good but couldn't figure out. can one help in this? tks in adv.

    Hi Rajesh,
    There will be two querry areas, check in which area you have created Infoset and user group. You will find the combination in relevant query area only.
    Two area are
    Standard Area (Client-specific)
    Global Area (Cross-client)
    Thanks
    ANAND K

  • POWL creation from Query

    Hi,
    I had created a query using SQ01. Now i want to create the POWL from this query and from the existing queries.
    Is there any document to create it.
    Anurodh

    hi,
    Use the below link. It has the document for POWL creation from Infoset query:
    [Powl from Infoset Qery|http://help.sap.com/bp_ekit604/BBLibrary/Documentation/k52_How_to_Guide_EN_DE.doc]
    Regards,
    MAdhu

  • Authorization Object for role creation for query display?

    Hi,
    Can Anybody here tell me what is the Authorization object that we use for role creation for query display?
    I want to assign a role to the newly designed query! that query does not have any role so far!
    Pls suggest me
    Thanks,
    Ravi

    Hi,
    I could make the authorization tab green by entering the authorization object!
    But user tab still remains red as it is not allowing me to enter my username in the user tab!
    in the user tab  i am unable to enter my user name?
    Any suggestions?
    Thanks,
    Ravi

  • ABAP query using logical database KDF is not populating custom fields

    Hi Experts ,
    I created two following queries
    1.       VENDORCATKDF – uses KDF logical database
    2.       VENDORCATLFA1 – uses table = LFA1
    I’m pulling the same information in both queries:
    ·         Vendor Number
    ·         Country
    ·         Vendor Name
    ·         Vendor Category  (custom fields added to LFA1)
    The results for the query that uses the logical database KDF is incorrect.  It doesn’t pull in the flag on the custom field LFA1-ZMRO.   Even though the logical database KDF is made up of the table LFA1 and has these fields. 
    Is there something that can be done – so that all of these “custom” category fields under LFA1 (such as LFA1-ZZMRO) – get pulled into queries – when we use the logical database KDF ?

    Hi,
    I have got the error removed by ensuring that fields from one table are a part of one line ( taking help of ruler) only. But the underlying problem remains, the output is not ALV but List output.
    I do not think having additional fields in the query is reason for this.
    Is it bcoz iI am adjusting the output length of columns to ensure no hierarchical error ?
    Can we not have a query using LDB which is shown as SAP List?
    Regards,
    Garima.

  • Error While Running Query in SQ00 in Prod Variant Not Standard Created.

    Dear Gurus,
    when i am running a Query in Sq00 T-code it will display a Error message
    the Error is "Variant Standard Not Created" or The Field String "R01" Contains No fields "
    some user is changing in this query so is it possible to retrieve the old version or how can we resolve the issue
    kindly help me
    regards
    RS

    Hi,
    for your quiry,
    Sq00 >>> Put u r quiry >>> go to menu >>> Maintain varient
    or
    T-code SQVI
    Kapil

  • Getting an error when i am execution a BI query using ABAP.

    Hi Expert,
    I am getting an error when i am execution a BI query using ABAP. Its Giving me this Error "The Info Provider properties for GHRGPDM12 are not the same as the system default" and in the error analysis it saying as bellow.
    Property Data Integrity has been set differently to the system default.
    Current setting: 0 for GHRGPDM12
    System default: u2019 7 u2018
    As I am very new to BI and have very limited knowledge, so I am not able to understand this problem. Can any one help me to resolving this issue. Previously it as working fine, I am getting this error last 2 days.
    when i am debugging , I am getting error from
    create instance of cl_rsr_request
    CREATE OBJECT r_request
    EXPORTING
    i_genuniid = p_genuniid.
    this FM. Its not able to create the object. Can any one please help me out.
    Thanks in advance.
    Regards
    Satrajit

    Hi,
    I am able to solve this problem
    Regards
    Satrajit

  • Error while accessing Query using Query Analyzer

    dear experts...
    while accesiing the query using query analayzer...
    we are getting below error...
    What has happened?
    URL http://xxx.xxx.xxx.xx:XXXX/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex call was terminated because the corresponding service is not available.
    Note
    The termination occurred in system BI1 with error code 404 and for the reason Not found.
    The selected virtual host was 0 .
    What can I do?
    Please select a valid URL.
    If you do not yet have a user ID, contact your system administrator.
    ErrorCode:ICF-NF-http-c:001-u:ANAND-l:E-i:PSRCCPRDA003_BI1_00-v:0-s:404-r:Notfound
    HTTP 404 - Not found
    Your SAP Internet Communication Framework Team
    thanks for helping me...
    anand

    Hi friends,,
    instead of getting the link like
    http://128.222.125.57:9000/sap/bw/bex?cmd=ldoc&infocube=ZMC_SRH1&query=AGINGV21A&sap-language=EN(working link)
    am getting below link...which is getting an error....
    http://128.222.125.57:9000/sap/bw/://:/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=AGINGV21A
    above marked is the unwanted thing so how can i change my link in query designer???
    please suggest me firneds

  • Unable to create new query using query manager

    Hi friends,
    I have been trying to create a query using query manager for couple of hours but still not able to.I am following the instructions given in oracle Peopletools 8.52 : Peoplesoft query
    Chapter - creating new queries.
    Below are the steps I am going through to create new query:
    Step - I open the component Reporting Tools-> Query->Query Manager , I don't get the tabbed pages one for search an existing query and another for create new query.
    Please follow this link to see how the page is displayed in first step:
    http://uploadpic.org/v.php?img=EvMvVAXX1E
    Step 2 - When I click on create new query link, I am redirected to a page where it asks for record name to add in the query. But, even this page is not displayed as how it supposed to be
    http://uploadpic.org/v.php?img=GzHh3f6krU
    Step 3 - Following the above step, when I click on Person record to add into my query I am asked to select the fields that I want to display in the output.
    But I somehow do not get the proper tabbed pages where individual pages are there to add the attributes to complete the query like adding multiple records, fields, query, expressions, prompt...etc
    http://uploadpic.org/v.php?img=Wbbla3Q3jE
    I am neither able to select multiple records in my query nor able to customize my query to get the desired results.
    Below is the query that I want to create using query manager:
    SELECT P.EMPLID,P.BIRTHDATE, N.NAME, A.ADDRESS1, A.ADDRESS2, A.CITY
    FROM PS_PERSON P, PS_NAMES N, PS_ADDRESSES A
    WHERE P.EMPLID = N.EMPLID AND
    N.EMPLID = A.EMPLID AND
    P.BIRTHDATE BETWEEN to_date('1990/1/1','yyyy/mm/dd') and to_date('1991/1/1','yyyy/mm/dd');

    Hi,
    As I cannot access your screenshot by the blocking of company firewall rules.
    I'm guessing currently you are using PT 8.52.00 version, correct?
    This should be a bug, that you need to apply the 8.52.0X patch, not sure which patch fix this, you can apply the latest one to solve this issue for no tab page of query manager. (PT 8.52.06)
    Hope this helps.
    Thanks,
    Saxon SI

  • In DBI , how to find out the Source Query used for the Report

    Hi All,
    How to find out the Source Query used to display the data in the DBI Reports or Dashboards. We can get it in Apps Front end by Going to Help and Record Histroty. But DBI Runs in Internet Explorer so i dont know how to get the source query ( SELECT Query ) Used.
    In IE we have View --> Source . But that does not help since it gives the HTML Coding and not the SELECT Query used.
    If anyone has ever worked on it...Please help me in finding it.
    Thanks,
    Neeraj Shrivastava

    Hi neeraj,
    You can see the query used to display reports.Follow these steps to get the query.
    1)Login to oracle apps
    2)Select "Daily Business Intelligence Administrator" responsiblity.
    3)Now click on "Enable/Disable Debugging" (Now u enabled debugging)
    4)now open the report which you want to see the query of
    5)In view source it displays query along with the bind varilables.
    Feel free to ping me if you have any doubts
    thanks
    kittu

  • Creation of role using T-code PFCG in R/3

    Hi Experts,
    I have created a Role using PFCG inorder to give acess only to three T-codes(PZ09. PZ80,PZ88).
    so i have created a role intially using PFCG and incorporated PZ09 tcode in it and assigend the Role to users in R/3. it is displaying the TCode(PZ09) in Portal.
    Now again i have added PZ80 & PZ88 to the same Role in R/3, but now i am getting an error:
    Infotype 0000 does not exist.
    but whereas when i assign SAP_ALL they(PZ88 & PZ 80) are working fine.
    Is they anything i can do so that i can avoid assigning SAP_ALL Profile to the users and eliminate the Error "Infotype 0000 does not exist.
    Thanks Inadvance,
    Regards,
    Siva

    Hi,
    Thanks for your reply,
    Creation of role using T-code PFCG in R/3
    The above link has solved my issue, Thank you!
    Regards,
    Siva

  • Creation of Material using BDC Session method & global class

    Hi
    Creation of Material using BDC Session method & global class by using oops.
    can anyone plz help me out

    Hi,
    it looks like it's not possible to call this BAPI wihtout material number. Here is a quote from BAPI documentation.
    When creating material master data, you must transfer the material
    number, the material type, and the industry sector to the method. You
    must also enter a material description and its language.
    Cheers

  • Problem regarding the creation of Table using CSS.

    Hi ,
    Here I have a Problem regarding the creation of Table using CSS.
    In My Application i have a table with multiple rows(Rows are Dynamically added to the table).First i am setting the table with the following properties:
    width:900px;
    height : auto,
    Overflow : visible,
    Max-height: : 200px.
    If I use above properties,I'm getting a table with 5 or 6 rows(height upto 200px).After that i am getting the Vertical ScrollBar.
    The problem is when a table has many columns, Vertical and Horizontal Scrolls are coming at the time of setting the table. The table height is not Increasing dynamically.
    How can i use "height" property in CSS? (I want the table height to be increased when the columns are more.)
    Thanks & Regards
    Madhavi

    Hey humble user. Errr I'm trying to understand what ur trying to do. U want to create a section of a region destructively from an existing region right? If so select the option convert to new region (opt-comm-R or selecting it by right clicking). Check your audio bin to make sure. Whats the "merge" function? Are u refering to the glue tool?

  • Automatic creation of Notification using T-code IK11

    Hi Gurus,
      i got stuck in a requirement, where they want Automatic creation of notification using T-code IK11.
    I am using EXIT IMRC0001.
        Please guide me that with what logic i should go.
    Thanks
    Regards
    VICKY
    Moderator Message: Vague Question. Expecting others to do your work for you => Thread Locked.
    Edited by: kishan P on May 12, 2011 12:35 PM

    In the role give Authorization object P_ORIGIN for Infotype 0, 1 and 2. with Authorization level as R (read)
    This will resolve your issue then no need to give sap_all authorization
    Good Luck
    - Ashish

Maybe you are looking for