Creation of Query using Infoset

Hi everyone i have a problem with assignment of user goups to infoset in writing a query for generating own report. first i created user group, next infoset and later while creating query when the user group is selected the infoset which i created and assigned to user group is not showing in dialog box. it's showing something else. i have checked all the assignments so far everything is good but couldn't figure out. can one help in this? tks in adv.

Hi Rajesh,
There will be two querry areas, check in which area you have created Infoset and user group. You will find the combination in relevant query area only.
Two area are
Standard Area (Client-specific)
Global Area (Cross-client)
Thanks
ANAND K

Similar Messages

  • Query using Infoset (NW04s)

    I have an infoset based on a CUBE & DSO. I create a query on Infoset. The query uses 0GL_ACCOUNT and uses a hierarchy. In the query result, there are instances where the a G/L account amount does not roll up to the associated hierarchy node.
    Example
    GL Node 1 -
    $0.00
    GL Acct----
    $500.00
    I don't get this problem when I run a similar query on CUBE.

    Hi Rajesh,
    There will be two querry areas, check in which area you have created Infoset and user group. You will find the combination in relevant query area only.
    Two area are
    Standard Area (Client-specific)
    Global Area (Cross-client)
    Thanks
    ANAND K

  • Creation of query using ME13 transaction

    Hi All,
    I have created a query the details of the out put taken from ME13 transction. In ME13 transctions three tabels are used EINA, EINE , KONP  I have joined this tabels in infoset. For KONP and other two table4s system is showing no realtion so I have taken LFM1 for joing KONP with other two.
    I am not getting anuy output. Can someone help me on this whether the table join is correct  or any improvement in that is required
    Regards,
    Prashant

    Please define additional fields in the query.
    You can select a field1 from table1 after comparing field2 in table2 with field2 in table1 even though table1 and table2 cannot be joined
    For e.g. "select single mahna from mhnk into DUNNINGPROCEDURE where kunnr eq mhnd-kunnr."
    Please show this code code as example to your ABAP consultant, he should be able to help.

  • Creation of query using SQ00

    Hi All,
    As business users we don't have access to SE16 or SE16N and during month end we have to check the deleted POs for the particular month and report it back. Each time we have to go to support team who will extract this data for us and this takes 2-3 days unnecessarily.
    Now I know we have to look in table EKPO, set date field between 01.08.2014 to 31.08.2014, and populate field LOEKZ = L to get the deleted POs for August month but I am unable to convert this into a SQ00 query. Can some of you experts help me with some kind of documentation or steps here to create the SQ00 query?
    Best Regards,
    Anup

    Hi Anup ,
    Method A
    1) . create an infoset on EKPO table . Go to extras , in the code section go to record processing and there write the below mentioned code :
    CHECK EKPO-LOEKZ = 'L'  .
    2).  now create a query on this infoset .
    Method B
    1). create an infoset on EKPO table .
    2). create a query on this infoset . Mark LOEKZ as selection screen field .
    So now when you execute the query ,  on selection screen pass 'L' to LOEKZ field .

  • SAP QUERY using ASSHR and ASSOB tables

    We currently have SAP query that reports on additional payments (Info type 0015).  The user wants to report the cost center held on the cost assignment (Tables ASSOB and ASSHR).
    The existing query uses infoset created using PNP logical database. 
    How do I add or join the ASSOB and ASSHR tables to Info type 0015 to report the cost center?
    Thanks in advance
    Shamshudin

    Hi Sham
    You may need to create custom fields in the infoset and create some code to pull out and display details from ASSHR and ASSOB corresponding to the ifnotype record.

  • How to query an Infoset using SAP JCO APIs

    Hi
    How can I  query an Infoset (on SAP ECC) using SAP JCO APIs?
    Thanks

    Hi,
    Please use the DDIF_FIELDINFO_GET (standard) Function Module to retireve the details which you have mentioned.
    Thanks,
    Arun

  • GDS using infoset query

    Dear All,
    I need to create a GDS using 2 tables COSP and BSEG.
    BSEG is cluster table and COSP is transparent table ...  Can i create GDS using Infoset query ...
    If yes then pls tell me the way to do this..
    Thanks,
    Regards
    Shweta

    Hi,
    Its not possible to create a view on cluster table.
    regards
    Shweta

  • Extraction using infoset query.

    Hi,
    I have an extractor in R/3 which is using infoset  for extraction. The infoset contains some logic for extraction. I want to debugg the infoset. As the infoset is not attached to a query how can i debugg the code written in infoset.
    Thanks & Regards,
    Soumya.

    Soumya,
    If the problem is in the data which is being extracted from R/3 then debug the datasource by:
    use transaction RSA3 in R/3 to execute the datasource and put a tick in the option "Debug Mode".
    Mark

  • Sapquery , adhoc query and Infoset query

    any body having any material for ADHOC QUERY , SAP QUERY and Infoset query with detail explanation and steps for creation.
    plz forward it to me??????????

    hi,
       sap query r used to design reports to see the data according to our selections in this daa is fetched from diff tables its  much easier to desing reports using this
                 infoset query is somthign used with BI ints used to read data form PSA some temp storage loc
               if i am wrong someone correct me
    reward if useful
    ravi

  • POWL creation from Query

    Hi,
    I had created a query using SQ01. Now i want to create the POWL from this query and from the existing queries.
    Is there any document to create it.
    Anurodh

    hi,
    Use the below link. It has the document for POWL creation from Infoset query:
    [Powl from Infoset Qery|http://help.sap.com/bp_ekit604/BBLibrary/Documentation/k52_How_to_Guide_EN_DE.doc]
    Regards,
    MAdhu

  • Prompt List of Values in WebI - SAP BI Variable - SAP BI Query -BI Infoset

    Hi,
    We have a Multiprovider built on an Infoset. SAP BI Infoset is built using 2 DSOs.
    There is a SAP BI Query on top of this Multiprovider.
    Multiple-Single Values type Optional Variables are created for some of the Objects of this SAP BI Query.
    Universe is created on top of this SAP BI Query, using SAP Integration kit.
    WebI is created on top of this Universe.
    Prompts are created on some of the Universe Objects, for the WebI report.
    We are facing a typical problem.
    When a WebI prompt is created on one particular object, (which also has a Multiple Single Value type Optional Variable in SAP BI Query), its List of Values is showing up only first three values in WebI. The SAP BI Variable in BEX Analyzer shows up all the 8 values for the List of Values, for the same object.
    The Output WebI report has more values for the object than shown up in the List of Values & this is the problem.
    We tried to keep the settings in Info-object, DSO, Infoset, Multiprovider = Values in Master Data (for the List of Values).
    Similar objects and similar variables for the same query / webi show all the List of Values.
    Any guidance on aspects to be checked would be helpful.
    regards,
    Rajesh K Sarin

    Problem :
    If an SAP BI Infoset is used in data modelling, and a restricted key
    figure is created in the SAP BI Query; the resultant WebI Object Prompt
    for the Info-object, only shows up LOVs which have been used for the
    restricted Key Figure. Both the things are not related except for the
    fact that some of the values for the same object are used for the
    restricted key figure.
    Details :
    We have a Multiprovider built on an SAP BI Infoset.
    SAP BI Infoset is built using 2 DSOs.
    There is a SAP BI Query on top of this Multiprovider.
    There is a restricted key figure in the sap bi query. KeyFigure "Number
    of Records" is restricted for 3 of the relevant Info-object "Meter
    Reading Status" values.
    Universe is created on top of this SAP BI Query, using SAP Integration
    kit. WebI is created on top of this Universe.
    Prompt is created on the Universe Object for Meter Reading Status, in
    the WebI report.
    List of Values is showing up only the three values in WebI (which were
    used in the Restricted Key Figure calculation).
    SAP BI Variable in BEX Analyzer for the same Info-object Meter Reading
    Status shows up all the 8 values for the List of Values.
    The Output WebI report has more values for the object than shown up in
    the List of Values & this is the problem.
    We have kept the settings in Info-object, DSO, Infoset,
    Multiprovider, Query = Values in Master Data (for the List of Values).
    When we delete the "Restricted Key Figure" from the SAP BI Query, the
    refreshed Universe and Webi have a complete set of List of Values
    applicable.   
    Steps for Reconstruction    
    1. Create Infoset
    2. Create SAP BI Query on Infoset
    3. Create Restricted Key Figure for Number of Records and few of the
    values for a characteristic info-object "X".
    4. Create BO Universe on SAP BI Query
    5. Create Webi on BO Universe
    6. Create a Prompt on the characteristic info-object "X".
    7. Check List of Values for the characteristic info-object "X" in SAP
    BI Query and WebI.
    8. LOVs in WebI are equal to the values used for restriction in the
    restricted key figure.
    9. Delete the restricted key figure from SAP BI Query.
    10. Refresh Universe
    11. Webi prompt shows all the values for the prompt on "X".

  • SAP / ABAP Query - using logical database

    Hi ,
    We have a mandate to implement SAP Query using only Logical Databases (LDB ) .
    We understand that there are several issues using this approach .
    1 ) Paralled tables in MM need to be displayed on separate lines .
    2 ) Statistics based on fields from 2 different tables cannot be produced eg: EKPO ( PO Number )  and EKKN . (Cost Center )
    Please share your experiences .
    Thank you in advance .
    Kishore
    Kishore

    Adeel,
    I do appreciate your experience and respect you for knowledge on SAP Query. 
    Joining tables seem simple to IT experts but not so for end users.  SAP Query is an end-user tool and users seem to need a simple user-friend, drag-and-drop solution to extract information using SAP Query based on a pre-defined infoset.  Various SAP conferences have been advocating the use of SAP delivered Logical Databses to create infosets in order to harness the various advantages of LDBs. 
    In MM there are several LDBs (e.g. ELM, EBM etc) to create queries on EKPO and EKKN.  The problem arises when you use the same LDB to extract information from more than the above two tables e.g. EKPO, EKET, EKKN and EKBE.  SAP expects you to display fields on multiple lines and also does not allow producing statistics based on fields from two parallel tables say EKKN and EKBE.  Moreover, multi-line reports cannot be produced in the ALV/SLV format.  
    We are also looking for best practise solutions in providing SAP Query to MM or FI users based on SAP delivered Logical Databases.  
    Pascal

  • Using infoset based on logical database gives lots of selection parameters

    Hi
    I'm trying to assist a new Crystal user in getting up on running on Crystal using infosets from SAP. Presently a simple infoset based on logical database PNPCE has been built using fields from just three infotypes (to keep things simple).
    When the user logs onto crystal and selects either this infoset, or a query based on the infoset, the very next step requires the user to set 80+ parameters to be null before running the report, and unfortunately those values cannot be saved to if in order to re-run the user has to manually set all the vallues to null again. Clearly this makes it pretty frustrating to use!
    This initial screen does not appear if using an infoset based on table joins, but unfortunately the logical database needs to be used to fulfill certain reporting requirements.
    I've tried saving a selection variant against a query and forcing it's use but these setting don't seem to be picked up by Crystal.
    Are there any Crystal/Query experts out there that can help with this?
    Regards
    Phil

    Hi,
    Is there anyone out there that can help with this? Seems to me like an issue that there 'should' be a soluton to...but I haven't found it yet!
    As a bit of additional info - the use of table join based infosets is not an option primarily because there are a lot of reports required that pull in the OM 'additional fields' that come through automatically when using an LDB. However, for table joins, it requires custom coding to be required to the infoset, which clearly restricts the user base from the ability to build their own reports.
    Regards
    Phil

  • SAP Query and infoset rename

    HI
    Is it possible to rename sap query and infoset at a same time instead of changing one by one.?
    Thanks
    reg
    cns

    Dear Sathya,
    SAP does not allow you to rename SAP Query & Info set at a same time.
    Note:
    The system has to lock the following objects before you are able to use the Rename SAP Info set function:
    User group catalog
    Info Set catalog
    Query catalogs for user groups to which the Info Set that you are renaming is assigned,
    Queries using this Info Set
    Once all these locks have been set, the system can carry out the function.
    Renaming an Info Set can, however, be very time-consuming. These locks may also prevent other users from working in the system for as long as it takes to rename the Info Set.
    Thanks & Regards
    Dinu

  • ABAP Query Using LDB

    Hello Frn's
    I need to develop a abap Query using LDB , for this a Infoset is allready created , which uses PNPCE LDB .
    Below i am Descrbing the scenerio , for which we need to develop the query ....
    Dept/Div Transfer
    Employees who transferred dept or division within specified date range:
    EmpID
    Last Name, First Name
    Date of transfer
    New department
    New division
    Current supervisor
    Old department
    Old division
    How can i fitler out the data of our requirment ... because i want to use same infoset in diffrent query .
    Please provide some solution
    Thanks and Regards..
    Priyank Dixit

    Hi Priyank,
    First you need to check whether all the required fields are available there in the LDB PNPCE(I guess you are using the same).
    I think old department, old division must not be available there. Then you need to add it in your Infoset and write custom code for these fields. Once you are done with custom coding, you can use this infoset for creating queries.
    Use trnx SQ02 to create queries, either SAP or Infoset.
    Hope it helps. Let me know if you need some more help.
    Raveesh

Maybe you are looking for